From 26bf7deca364a5b33f39e8f14ddd3f4081345015 Mon Sep 17 00:00:00 2001 From: Aubrey Li Date: Mon, 19 Mar 2007 01:24:52 +0800 Subject: [Blackfin][PATCH] Add BF537 stamp board support --- board/bf537-stamp/ether_bf537.h | 110 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 110 insertions(+) create mode 100644 board/bf537-stamp/ether_bf537.h (limited to 'board/bf537-stamp/ether_bf537.h') diff --git a/board/bf537-stamp/ether_bf537.h b/board/bf537-stamp/ether_bf537.h new file mode 100644 index 0000000000..64240ba01b --- /dev/null +++ b/board/bf537-stamp/ether_bf537.h @@ -0,0 +1,110 @@ +#define PHYADDR 0x01 +#define NO_PHY_REGS 0x20 + +#define DEFAULT_PHY_PHYID1 0x0007 +#define DEFAULT_PHY_PHYID2 0xC0A3 +#define PHY_MODECTL 0x00 +#define PHY_MODESTAT 0x01 +#define PHY_PHYID1 0x02 +#define PHY_PHYID2 0x03 +#define PHY_ANAR 0x04 +#define PHY_ANLPAR 0x05 +#define PHY_ANER 0x06 + +#define PHY_RESET 0x8000 +#define PHY_ANEG_EN 0x1000 +#define PHY_DUPLEX 0x0100 +#define PHY_SPD_SET 0x2000 + +#define RECV_BUFSIZE (0x614) + +typedef volatile u32 reg32; +typedef volatile u16 reg16; + +typedef struct ADI_DMA_CONFIG_REG { + u16 b_DMA_EN:1; /* 0 Enabled */ + u16 b_WNR:1; /* 1 Direction */ + u16 b_WDSIZE:2; /* 2:3 Transfer word size */ + u16 b_DMA2D:1; /* 4 DMA mode */ + u16 b_RESTART:1; /* 5 Retain FIFO */ + u16 b_DI_SEL:1; /* 6 Data interrupt timing select */ + u16 b_DI_EN:1; /* 7 Data interrupt enabled */ + u16 b_NDSIZE:4; /* 8:11 Flex descriptor size */ + u16 b_FLOW:3; /* 12:14Flow */ +} ADI_DMA_CONFIG_REG; + +typedef struct adi_ether_frame_buffer { + u16 NoBytes; /* the no. of following bytes */ + u8 Dest[6]; /* destination MAC address */ + u8 Srce[6]; /* source MAC address */ + u16 LTfield; /* length/type field */ + u8 Data[0]; /* payload bytes */ +} ADI_ETHER_FRAME_BUFFER; +/* 16 bytes/struct */ + +typedef struct dma_descriptor { + struct dma_descriptor *NEXT_DESC_PTR; + u32 START_ADDR; + ADI_DMA_CONFIG_REG CONFIG; +} DMA_DESCRIPTOR; +/* 10 bytes/struct in 12 bytes */ + +typedef struct adi_ether_buffer { + DMA_DESCRIPTOR Dma[2]; /* first for the frame, second for the status */ + ADI_ETHER_FRAME_BUFFER *FrmData;/* pointer to data */ + struct adi_ether_buffer *pNext; /* next buffer */ + struct adi_ether_buffer *pPrev; /* prev buffer */ + u16 IPHdrChksum; /* the IP header checksum */ + u16 IPPayloadChksum; /* the IP header and payload checksum */ + volatile u32 StatusWord; /* the frame status word */ +} ADI_ETHER_BUFFER; +/* 40 bytes/struct in 44 bytes */ + +void SetupMacAddr(u8 * MACaddr); + +void PollMdcDone(void); +void WrPHYReg(u16 PHYAddr, u16 RegAddr, u16 Data); +u16 RdPHYReg(u16 PHYAddr, u16 RegAddr); +void SoftResetPHY(void); +void DumpPHYRegs(void); + +int SetupSystemRegs(int *opmode); + +/** + * is_zero_ether_addr - Determine if give Ethernet address is all zeros. + * @addr: Pointer to a six-byte array containing the Ethernet address + * + * Return true if the address is all zeroes. + */ +static inline int is_zero_ether_addr(const u8 * addr) +{ + return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]); +} + +/** + * is_multicast_ether_addr - Determine if the Ethernet address is a multicast. + * @addr: Pointer to a six-byte array containing the Ethernet address + * + * Return true if the address is a multicast address. + * By definition the broadcast address is also a multicast address. + */ +static inline int is_multicast_ether_addr(const u8 * addr) +{ + return (0x01 & addr[0]); +} + +/** + * is_valid_ether_addr - Determine if the given Ethernet address is valid + * @addr: Pointer to a six-byte array containing the Ethernet address + * + * Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not + * a multicast address, and is not FF:FF:FF:FF:FF:FF. + * + * Return true if the address is valid. + */ +static inline int is_valid_ether_addr(const u8 * addr) +{ + /* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to + * explicitly check for it here. */ + return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr); +} -- cgit v1.2.1