From fda241d59d12381493f31e38f94a2057a955ec94 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Fri, 25 Nov 2011 09:08:36 +0100 Subject: MX35: flea3: changes due to hardware revision B Revision B of the board uses CSD0 for the DRAM, as usual for MX3 boards. The patch fixes also some values in the U-Boot environment. Signed-off-by: Stefano Babic --- board/CarMediaLab/flea3/flea3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'board/CarMediaLab') diff --git a/board/CarMediaLab/flea3/flea3.c b/board/CarMediaLab/flea3/flea3.c index 64f4b57f1b..34ede87ff4 100644 --- a/board/CarMediaLab/flea3/flea3.c +++ b/board/CarMediaLab/flea3/flea3.c @@ -160,7 +160,7 @@ static void board_setup_sdram(void) writel(0x2000, &esdc->esdctl0); writel(0x2000, &esdc->esdctl1); - board_setup_sdram_bank(CSD1_BASE_ADDR); + board_setup_sdram_bank(CSD0_BASE_ADDR); } static void setup_iomux_uart3(void) @@ -229,7 +229,7 @@ int board_early_init_f(void) (struct ccm_regs *)IMX_CCM_BASE; /* setup GPIO3_1 to set HighVCore signal */ - mxc_request_iomux(MX35_PIN_ATA_DATA1, MUX_CONFIG_ALT5); + mxc_request_iomux(MX35_PIN_ATA_DA1, MUX_CONFIG_ALT5); gpio_direction_output(65, 1); /* initialize PLL and clock configuration */ -- cgit v1.2.1