From 2e19cc316f38c56e3bbc127491bc8722c1b0386c Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 19 Jan 2015 11:33:41 +0100 Subject: arm: mvebu: Add Serdes PHY config code This code is ported from the Marvell bin_hdr code into mainline SPL U-Boot. It needs to be executed very early so that the devices connected to the serdes PHY are configured correctly. Signed-off-by: Stefan Roese Reviewed-by: Luka Perkov --- arch/arm/mvebu-common/serdes/high_speed_env_spec.h | 87 ++++++++++++++++++++++ 1 file changed, 87 insertions(+) create mode 100644 arch/arm/mvebu-common/serdes/high_speed_env_spec.h (limited to 'arch/arm/mvebu-common/serdes/high_speed_env_spec.h') diff --git a/arch/arm/mvebu-common/serdes/high_speed_env_spec.h b/arch/arm/mvebu-common/serdes/high_speed_env_spec.h new file mode 100644 index 0000000000..e5aa1b06ed --- /dev/null +++ b/arch/arm/mvebu-common/serdes/high_speed_env_spec.h @@ -0,0 +1,87 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __HIGHSPEED_ENV_SPEC_H +#define __HIGHSPEED_ENV_SPEC_H + +#include "../../../drivers/ddr/mvebu/ddr3_hw_training.h" + +typedef enum { + SERDES_UNIT_UNCONNECTED = 0x0, + SERDES_UNIT_PEX = 0x1, + SERDES_UNIT_SATA = 0x2, + SERDES_UNIT_SGMII0 = 0x3, + SERDES_UNIT_SGMII1 = 0x4, + SERDES_UNIT_SGMII2 = 0x5, + SERDES_UNIT_SGMII3 = 0x6, + SERDES_UNIT_QSGMII = 0x7, + SERDES_UNIT_SETM = 0x8, + SERDES_LAST_UNIT +} MV_BIN_SERDES_UNIT_INDX; + + +typedef enum { + PEX_BUS_DISABLED = 0, + PEX_BUS_MODE_X1 = 1, + PEX_BUS_MODE_X4 = 2, + PEX_BUS_MODE_X8 = 3 +} MV_PEX_UNIT_CFG; + +typedef enum pex_type { + MV_PEX_ROOT_COMPLEX, /* root complex device */ + MV_PEX_END_POINT /* end point device */ +} MV_PEX_TYPE; + +typedef struct serdes_change_m_phy { + MV_BIN_SERDES_UNIT_INDX type; + u32 reg_low_speed; + u32 val_low_speed; + u32 reg_hi_speed; + u32 val_hi_speed; +} MV_SERDES_CHANGE_M_PHY; + +/* + * Configuration per SERDES line. Each nibble is MV_SERDES_LINE_TYPE + */ +typedef struct board_serdes_conf { + MV_PEX_TYPE pex_type; /* MV_PEX_ROOT_COMPLEX MV_PEX_END_POINT */ + u32 line0_7; /* Lines 0 to 7 SERDES MUX one nibble per line */ + u32 line8_15; /* Lines 8 to 15 SERDES MUX one nibble per line */ + MV_PEX_UNIT_CFG pex_mode[4]; + + /* + * Bus speed - one bit per SERDES line: + * Low speed (0) High speed (1) + * PEX 2.5 G (10 bit) 5 G (20 bit) + * SATA 1.5 G 3 G + * SGMII 1.25 Gbps 3.125 Gbps + */ + u32 bus_speed; + + MV_SERDES_CHANGE_M_PHY *serdes_m_phy_change; +} MV_BIN_SERDES_CFG; + + +#define BIN_SERDES_CFG { \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 0 */ \ + {0, 1, -1 , -1, -1, -1, -1, -1, 2}, /* Lane 1 */ \ + {0, 1, -1 , 2, -1, -1, -1, -1, 3}, /* Lane 2 */ \ + {0, 1, -1 , -1, 2, -1, -1, 3, -1}, /* Lane 3 */ \ + {0, 1, 2 , -1, -1, 3, -1, -1, 4}, /* Lane 4 */ \ + {0, 1, 2 , -1, 3, -1, -1, 4, -1}, /* Lane 5 */ \ + {0, 1, 2 , 4, -1, 3, -1, -1, -1}, /* Lane 6 */ \ + {0, 1, -1 , 2, -1, -1, 3, -1, 4}, /* Lane 7*/ \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 8 */ \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 9 */ \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 10 */ \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 11 */ \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 12 */ \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 13 */ \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 14 */ \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 15 */ \ +} + +#endif /* __HIGHSPEED_ENV_SPEC_H */ -- cgit v1.2.1