From e6607cffef965011ef0ddc0fbe6f4b7c0d53aeec Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 29 May 2014 15:29:40 -0600 Subject: ARM: tegra: enable USB device mode and UMS on some boards For each of Jetson TK1, Venice2, and Beaver: - Enable the first USB controller in DT, and describe its configuration. - Enable USB device/gadget support. This allows the user to type e.g. "ums 0 mmc 0" at the command-line to cause U-Boot to act a USB device implementing the USB Mass Storage protocol, and expose MMC device 0 that way. This allows a host PC to mount the Tegra device's MMC, partition it, and install a filesystem on it. Signed-off-by: Stephen Warren Signed-off-by: Tom Warren --- arch/arm/dts/tegra124-venice2.dts | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch/arm/dts/tegra124-venice2.dts') diff --git a/arch/arm/dts/tegra124-venice2.dts b/arch/arm/dts/tegra124-venice2.dts index 2f8d1dcc37..f003413bd7 100644 --- a/arch/arm/dts/tegra124-venice2.dts +++ b/arch/arm/dts/tegra124-venice2.dts @@ -17,7 +17,8 @@ sdhci1 = "/sdhci@700b0400"; spi0 = "/spi@7000d400"; spi1 = "/spi@7000da00"; - usb0 = "/usb@7d008000"; + usb0 = "/usb@7d000000"; + usb1 = "/usb@7d008000"; }; memory { @@ -77,6 +78,12 @@ bus-width = <8>; }; + usb@7d000000 { + status = "okay"; + dr_mode = "otg"; + nvidia,vbus-gpio = <&gpio 108 0>; /* gpio PN4, USB_VBUS_EN0 */ + }; + usb@7d008000 { status = "okay"; nvidia,vbus-gpio = <&gpio 109 0>; /* gpio PN5, USB_VBUS_EN1 */ -- cgit v1.2.1