From b4ad44baab713af371b1113dd63dd222ba73ba13 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 6 Jan 2015 14:28:16 +0900 Subject: ARM: UniPhier: add UART initialization routine for low-level debug The low-level debugging functions are useful to debug the early boot stage where the full UART driver is not available. UniPhier SoCs need to initialize the UART port 0 to use this feature. The initialization routine is called at the very entry of the lowlevel_init(). Signed-off-by: Masahiro Yamada --- arch/arm/cpu/armv7/uniphier/lowlevel_init.S | 4 +++ arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile | 1 + .../cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S | 29 ++++++++++++++++ arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile | 1 + .../cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S | 39 ++++++++++++++++++++++ arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile | 1 + .../cpu/armv7/uniphier/ph1-sld8/lowlevel_debug.S | 29 ++++++++++++++++ 7 files changed, 104 insertions(+) create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/lowlevel_debug.S (limited to 'arch/arm/cpu') diff --git a/arch/arm/cpu/armv7/uniphier/lowlevel_init.S b/arch/arm/cpu/armv7/uniphier/lowlevel_init.S index 0ea12d3cfc..c208ab67a1 100644 --- a/arch/arm/cpu/armv7/uniphier/lowlevel_init.S +++ b/arch/arm/cpu/armv7/uniphier/lowlevel_init.S @@ -26,6 +26,10 @@ ENTRY(lowlevel_init) orr r0, r0, #(CR_C | CR_M) @ enable MMU and Dcache mcr p15, 0, r0, c1, c0, 0 +#ifdef CONFIG_DEBUG_LL + bl setup_lowlevel_debug +#endif + /* * Now we are using the page table embedded in the Boot ROM. * It is not handy since it is not a straight mapped table for sLD3. diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile index 8794629b2a..0752906121 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o obj-y += boot-mode.o +obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ clkrst_init.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S b/arch/arm/cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S new file mode 100644 index 0000000000..c0778a0abb --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S @@ -0,0 +1,29 @@ +/* + * On-chip UART initializaion for low-level debugging + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +#define UART_CLK 36864000 +#include + +ENTRY(setup_lowlevel_debug) + init_debug_uart r0, r1, r2 + + /* UART Port 0 */ + set_pinsel 85, 1, r0, r1 + set_pinsel 88, 1, r0, r1 + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + mov pc, lr +ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile index cee78781f6..8206e2a354 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o obj-y += boot-mode.o +obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-$(CONFIG_SOC_INIT) += sbc_init.o sg_init.o pll_init.o clkrst_init.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o ddrphy_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S b/arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S new file mode 100644 index 0000000000..a793b7c118 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S @@ -0,0 +1,39 @@ +/* + * On-chip UART initializaion for low-level debugging + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#define UART_CLK 73728000 +#include + +ENTRY(setup_lowlevel_debug) + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CLK_PERI + str r1, [r0] + + init_debug_uart r0, r1, r2 + + /* UART Port 0 */ + set_pinsel 127, 0, r0, r1 + set_pinsel 128, 0, r0, r1 + + ldr r0, =SG_LOADPINCTRL + mov r1, #1 + str r1, [r0] + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + mov pc, lr +ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile index 8794629b2a..0752906121 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o obj-y += boot-mode.o +obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ clkrst_init.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/lowlevel_debug.S b/arch/arm/cpu/armv7/uniphier/ph1-sld8/lowlevel_debug.S new file mode 100644 index 0000000000..a413e5fd8a --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/lowlevel_debug.S @@ -0,0 +1,29 @@ +/* + * On-chip UART initializaion for low-level debugging + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +#define UART_CLK 80000000 +#include + +ENTRY(setup_lowlevel_debug) + init_debug_uart r0, r1, r2 + + /* UART Port 0 */ + set_pinsel 70, 3, r0, r1 + set_pinsel 71, 3, r0, r1 + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + mov pc, lr +ENDPROC(setup_lowlevel_debug) -- cgit v1.2.1