From 60c7c30aa084588ef974663be3d22a1de7f66cbb Mon Sep 17 00:00:00 2001 From: Paul Kocialkowski Date: Wed, 15 Jul 2015 16:02:19 +0200 Subject: omap-common: Common boot code OMAP3 support and cleanup This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski --- arch/arm/cpu/armv7/omap-common/Makefile | 2 - arch/arm/cpu/armv7/omap-common/boot-common.c | 126 +++++++++++++++---------- arch/arm/cpu/armv7/omap-common/hwinit-common.c | 2 + arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 3 +- arch/arm/cpu/armv7/omap3/board.c | 59 ------------ arch/arm/cpu/armv7/omap3/lowlevel_init.S | 10 -- 6 files changed, 78 insertions(+), 124 deletions(-) (limited to 'arch/arm/cpu/armv7') diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index f3725b267c..464a5d1d73 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -26,9 +26,7 @@ ifeq ($(CONFIG_SYS_DCACHE_OFF),) obj-y += omap-cache.o endif -ifeq ($(CONFIG_OMAP34XX),) obj-y += boot-common.o -endif obj-y += lowlevel_init.o obj-y += mem-common.o diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index 7fc0a561b7..3e67d625a2 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -17,27 +17,28 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; void save_omap_boot_params(void) { - u32 rom_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); - u8 boot_device; - u32 dev_desc, dev_data; + u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); + struct omap_boot_parameters *omap_boot_params; + u32 boot_device; + u32 boot_mode; - if ((rom_params < NON_SECURE_SRAM_START) || - (rom_params > NON_SECURE_SRAM_END)) + if ((boot_params < NON_SECURE_SRAM_START) || + (boot_params > NON_SECURE_SRAM_END)) return; - /* - * rom_params can be type casted to omap_boot_parameters and - * used. But it not correct to assume that romcode structure - * encoding would be same as u-boot. So use the defined offsets. - */ - boot_device = *((u8 *)(rom_params + BOOT_DEVICE_OFFSET)); + omap_boot_params = (struct omap_boot_parameters *)boot_params; + + /* Boot device */ -#if defined(BOOT_DEVICE_NAND_I2C) + boot_device = omap_boot_params->boot_device; + +#ifdef BOOT_DEVICE_NAND_I2C /* * Re-map NAND&I2C boot-device to the "normal" NAND boot-device. * Otherwise the SPL boot IF can't handle this device correctly. @@ -47,29 +48,6 @@ void save_omap_boot_params(void) if (boot_device == BOOT_DEVICE_NAND_I2C) boot_device = BOOT_DEVICE_NAND; #endif - gd->arch.omap_boot_params.omap_bootdevice = boot_device; - - gd->arch.omap_boot_params.ch_flags = - *((u8 *)(rom_params + CH_FLAGS_OFFSET)); - - if ((boot_device >= MMC_BOOT_DEVICES_START) && - (boot_device <= MMC_BOOT_DEVICES_END)) { -#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX) && \ - !defined(CONFIG_AM43XX) - if ((omap_hw_init_context() == - OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) { - gd->arch.omap_boot_params.omap_bootmode = - *((u8 *)(rom_params + BOOT_MODE_OFFSET)); - } else -#endif - { - dev_desc = *((u32 *)(rom_params + DEV_DESC_PTR_OFFSET)); - dev_data = *((u32 *)(dev_desc + DEV_DATA_PTR_OFFSET)); - gd->arch.omap_boot_params.omap_bootmode = - *((u32 *)(dev_data + BOOT_MODE_OFFSET)); - } - } - #if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) /* * We get different values for QSPI_1 and QSPI_4 being used, but @@ -77,31 +55,70 @@ void save_omap_boot_params(void) * mangle the later code, if we're coming in as QSPI_4 just * change to the QSPI_1 value. */ - if (gd->arch.omap_boot_params.omap_bootdevice == 11) - gd->arch.omap_boot_params.omap_bootdevice = BOOT_DEVICE_SPI; + if (boot_device == 11) + boot_device = BOOT_DEVICE_SPI; +#endif + + gd->arch.omap_boot_device = boot_device; + + /* Boot mode */ + + boot_mode = MMCSD_MODE_UNDEFINED; + + if ((boot_device >= MMC_BOOT_DEVICES_START) && + (boot_device <= MMC_BOOT_DEVICES_END)) { +#ifdef CONFIG_OMAP34XX + switch (boot_device) { + case BOOT_DEVICE_MMC1: + boot_mode = MMCSD_MODE_FS; + break; + case BOOT_DEVICE_MMC2: + boot_mode = MMCSD_MODE_RAW; + break; + } +#else + boot_params = omap_boot_params->boot_device_descriptor; + if ((boot_params < NON_SECURE_SRAM_START) || + (boot_params > NON_SECURE_SRAM_END)) + return; + + boot_params = *((u32 *)(boot_params + DEVICE_DATA_OFFSET)); + if ((boot_params < NON_SECURE_SRAM_START) || + (boot_params > NON_SECURE_SRAM_END)) + return; + + boot_mode = *((u32 *)(boot_params + BOOT_MODE_OFFSET)); + + if (boot_mode != MMCSD_MODE_FS && + boot_mode != MMCSD_MODE_RAW) +#ifdef CONFIG_SUPPORT_EMMC_BOOT + boot_mode = MMCSD_MODE_EMMCBOOT +#else + boot_mode = MMCSD_MODE_UNDEFINED; +#endif +#endif + } + + gd->arch.omap_boot_mode = boot_mode; + +#if !defined(CONFIG_TI814X) && !defined(CONFIG_TI816X) && \ + !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX) + + /* CH flags */ + + gd->arch.omap_ch_flags = omap_boot_params->ch_flags; #endif } #ifdef CONFIG_SPL_BUILD u32 spl_boot_device(void) { - return (u32) (gd->arch.omap_boot_params.omap_bootdevice); + return gd->arch.omap_boot_device; } u32 spl_boot_mode(void) { - u32 val = gd->arch.omap_boot_params.omap_bootmode; - - if (val == MMCSD_MODE_RAW) - return MMCSD_MODE_RAW; - else if (val == MMCSD_MODE_FS) - return MMCSD_MODE_FS; - else -#ifdef CONFIG_SUPPORT_EMMC_BOOT - return MMCSD_MODE_EMMCBOOT; -#else - return MMCSD_MODE_UNDEFINED; -#endif + return gd->arch.omap_boot_mode; } void spl_board_init(void) @@ -116,9 +133,12 @@ void spl_board_init(void) /* Prepare console output */ preloader_console_init(); -#ifdef CONFIG_SPL_NAND_SUPPORT +#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT) gpmc_init(); #endif +#ifdef CONFIG_SPL_I2C_SUPPORT + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); +#endif #if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT) arch_misc_init(); #endif @@ -150,9 +170,11 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) image_entry_noargs_t image_entry = (image_entry_noargs_t) spl_image->entry_point; + u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); + debug("image entry point: 0x%X\n", spl_image->entry_point); /* Pass the saved boot_params from rom code */ - image_entry((u32 *)&gd->arch.omap_boot_params); + image_entry((u32 *)boot_params); } #endif diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index 6c8f3bcea4..80794f9c61 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -90,7 +90,9 @@ void __weak srcomp_enable(void) */ int arch_cpu_init(void) { +#ifdef CONFIG_SPL save_omap_boot_params(); +#endif return 0; } #endif /* CONFIG_ARCH_CPU_INIT */ diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index 746df922c2..528313584f 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -16,8 +16,9 @@ #include #include -#ifndef CONFIG_OMAP34XX +#ifdef CONFIG_SPL ENTRY(save_boot_params) + ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS str r0, [r1] b save_boot_params_ret diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index b064c0cc83..17cb5b759b 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -18,7 +18,6 @@ */ #include #include -#include #include #include #include @@ -27,8 +26,6 @@ #include #include #include -#include -#include #include DECLARE_GLOBAL_DATA_PTR; @@ -73,62 +70,6 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx; #endif -#ifdef CONFIG_SPL_BUILD -/* -* We use static variables because global data is not ready yet. -* Initialized data is available in SPL right from the beginning. -* We would not typically need to save these parameters in regular -* U-Boot. This is needed only in SPL at the moment. -*/ -u32 omap3_boot_device = BOOT_DEVICE_NAND; - -/* auto boot mode detection is not possible for OMAP3 - hard code */ -u32 spl_boot_mode(void) -{ - switch (spl_boot_device()) { - case BOOT_DEVICE_MMC2: - return MMCSD_MODE_RAW; - case BOOT_DEVICE_MMC1: - return MMCSD_MODE_FS; - break; - default: - puts("spl: ERROR: unknown device - can't select boot mode\n"); - hang(); - } -} - -u32 spl_boot_device(void) -{ - return omap3_boot_device; -} - -int board_mmc_init(bd_t *bis) -{ - switch (spl_boot_device()) { - case BOOT_DEVICE_MMC1: - omap_mmc_init(0, 0, 0, -1, -1); - break; - case BOOT_DEVICE_MMC2: - case BOOT_DEVICE_MMC2_2: - omap_mmc_init(1, 0, 0, -1, -1); - break; - } - return 0; -} - -void spl_board_init(void) -{ - preloader_console_init(); -#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT) - gpmc_init(); -#endif -#ifdef CONFIG_SPL_I2C_SUPPORT - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); -#endif -} -#endif /* CONFIG_SPL_BUILD */ - - /****************************************************************************** * Routine: secure_unlock * Description: Setup security registers for access diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index 249761308e..1e587723ce 100644 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -16,16 +16,6 @@ #include #include -#ifdef CONFIG_SPL_BUILD -ENTRY(save_boot_params) - ldr r4, =omap3_boot_device - ldr r5, [r0, #0x4] - and r5, r5, #0xff - str r5, [r4] - b save_boot_params_ret -ENDPROC(save_boot_params) -#endif - /* * Funtion for making PPA HAL API calls in secure devices * Input: -- cgit v1.2.1