From 9fa32b12370236a39090d4e42b013910d123db61 Mon Sep 17 00:00:00 2001 From: Vikas Manocha Date: Tue, 18 Nov 2014 10:42:22 -0800 Subject: stv0991: Add basic stv0991 architecture support stv0991 architecture support added. It contains the support for following blocks - Timer - uart Signed-off-by: Vikas Manocha [trini: Add arch/arm/cpu/armv7/Makefile hunk] Signed-off-by: Tom Rini --- arch/arm/cpu/armv7/stv0991/timer.c | 114 +++++++++++++++++++++++++++++++++++++ 1 file changed, 114 insertions(+) create mode 100644 arch/arm/cpu/armv7/stv0991/timer.c (limited to 'arch/arm/cpu/armv7/stv0991/timer.c') diff --git a/arch/arm/cpu/armv7/stv0991/timer.c b/arch/arm/cpu/armv7/stv0991/timer.c new file mode 100644 index 0000000000..8654b8b686 --- /dev/null +++ b/arch/arm/cpu/armv7/stv0991/timer.c @@ -0,0 +1,114 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +static struct stv0991_cgu_regs *const stv0991_cgu_regs = \ + (struct stv0991_cgu_regs *) (CGU_BASE_ADDR); + +#define READ_TIMER() (readl(&gpt1_regs_ptr->cnt) & GPT_FREE_RUNNING) +#define GPT_RESOLUTION (CONFIG_STV0991_HZ_CLOCK / CONFIG_STV0991_HZ) + +DECLARE_GLOBAL_DATA_PTR; + +#define timestamp gd->arch.tbl +#define lastdec gd->arch.lastinc + +int timer_init(void) +{ + /* Timer1 clock configuration */ + writel(TIMER1_CLK_CFG, &stv0991_cgu_regs->tim_freq); + writel(readl(&stv0991_cgu_regs->cgu_enable_2) | + TIMER1_CLK_EN, &stv0991_cgu_regs->cgu_enable_2); + + /* Stop the timer */ + writel(readl(&gpt1_regs_ptr->cr1) & ~GPT_CR1_CEN, &gpt1_regs_ptr->cr1); + writel(GPT_PRESCALER_128, &gpt1_regs_ptr->psc); + /* Configure timer for auto-reload */ + writel(readl(&gpt1_regs_ptr->cr1) | GPT_MODE_AUTO_RELOAD, + &gpt1_regs_ptr->cr1); + + /* load value for free running */ + writel(GPT_FREE_RUNNING, &gpt1_regs_ptr->arr); + + /* start timer */ + writel(readl(&gpt1_regs_ptr->cr1) | GPT_CR1_CEN, + &gpt1_regs_ptr->cr1); + + /* Reset the timer */ + lastdec = READ_TIMER(); + timestamp = 0; + + return 0; +} + +/* + * timer without interrupts + */ +ulong get_timer(ulong base) +{ + return (get_timer_masked() / GPT_RESOLUTION) - base; +} + +void __udelay(unsigned long usec) +{ + ulong tmo; + ulong start = get_timer_masked(); + ulong tenudelcnt = CONFIG_STV0991_HZ_CLOCK / (1000 * 100); + ulong rndoff; + + rndoff = (usec % 10) ? 1 : 0; + + /* tenudelcnt timer tick gives 10 microsecconds delay */ + tmo = ((usec / 10) + rndoff) * tenudelcnt; + + while ((ulong) (get_timer_masked() - start) < tmo) + ; +} + +ulong get_timer_masked(void) +{ + ulong now = READ_TIMER(); + + if (now >= lastdec) { + /* normal mode */ + timestamp += now - lastdec; + } else { + /* we have an overflow ... */ + timestamp += now + GPT_FREE_RUNNING - lastdec; + } + lastdec = now; + + return timestamp; +} + +void udelay_masked(unsigned long usec) +{ + return udelay(usec); +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return CONFIG_STV0991_HZ; +} -- cgit v1.2.1