From 37be54fd1351a177c061c2c351ffdd53efaebb59 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Fri, 5 Jun 2015 15:19:21 +0530 Subject: ARM: BeagleBoard-x15: Enable i2c5 clocks On AM57xx evm I2C5 is used to detect the LCD board by reading the EEPROM present on the bus. Enable i2c5 clocks to help that. Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini --- arch/arm/cpu/armv7/omap5/hw_data.c | 7 +++++++ arch/arm/cpu/armv7/omap5/prcm-regs.c | 4 ++++ 2 files changed, 11 insertions(+) (limited to 'arch/arm/cpu/armv7/omap5') diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index bfdf1e0519..f1a59a3ca9 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -534,6 +534,9 @@ void enable_basic_clocks(void) void enable_basic_uboot_clocks(void) { u32 const clk_domains_essential[] = { +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) + (*prcm)->cm_ipu_clkstctrl, +#endif 0 }; @@ -547,7 +550,11 @@ void enable_basic_uboot_clocks(void) (*prcm)->cm_l4per_i2c2_clkctrl, (*prcm)->cm_l4per_i2c3_clkctrl, (*prcm)->cm_l4per_i2c4_clkctrl, +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) + (*prcm)->cm_ipu_i2c5_clkctrl, +#else (*prcm)->cm_l4per_i2c5_clkctrl, +#endif (*prcm)->cm_l3init_hsusbhost_clkctrl, (*prcm)->cm_l3init_fsusb_clkctrl, 0 diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c index 0547037ff8..cd51fe7678 100644 --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -817,6 +817,10 @@ struct prcm_regs const dra7xx_prcm = { .cm_dsp_clkstctrl = 0x4a005400, .cm_dsp_dsp_clkctrl = 0x4a005420, + /* cm IPU */ + .cm_ipu_clkstctrl = 0x4a005540, + .cm_ipu_i2c5_clkctrl = 0x4a005578, + /* prm irqstatus regs */ .prm_irqstatus_mpu_2 = 0x4ae06014, -- cgit v1.2.1