From 45b940d6f9a9d4989452ea67480e299bfa51ee19 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Thu, 19 Sep 2013 18:06:40 +0200 Subject: ARM: add secure monitor handler to switch to non-secure state A prerequisite for using virtualization is to be in HYP mode, which requires the CPU to be in non-secure state first. Add a new file in arch/arm/cpu/armv7 to hold a monitor handler routine which switches the CPU to non-secure state by setting the NS and associated bits. According to the ARM architecture reference manual this should not be done in SVC mode, so we have to setup a SMC handler for this. We create a new vector table to avoid interference with other boards. The MVBAR register will be programmed later just before the smc call. Signed-off-by: Andre Przywara --- arch/arm/cpu/armv7/nonsec_virt.S | 53 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 arch/arm/cpu/armv7/nonsec_virt.S (limited to 'arch/arm/cpu/armv7/nonsec_virt.S') diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S new file mode 100644 index 0000000000..d11eb2dc63 --- /dev/null +++ b/arch/arm/cpu/armv7/nonsec_virt.S @@ -0,0 +1,53 @@ +/* + * code for switching cores into non-secure state + * + * Copyright (c) 2013 Andre Przywara + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +/* the vector table for secure state */ +_monitor_vectors: + .word 0 /* reset */ + .word 0 /* undef */ + adr pc, _secure_monitor + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + +/* + * secure monitor handler + * U-boot calls this "software interrupt" in start.S + * This is executed on a "smc" instruction, we use a "smc #0" to switch + * to non-secure state. + * We use only r0 and r1 here, due to constraints in the caller. + */ + .align 5 +_secure_monitor: + mrc p15, 0, r1, c1, c1, 0 @ read SCR + bic r1, r1, #0x4e @ clear IRQ, FIQ, EA, nET bits + orr r1, r1, #0x31 @ enable NS, AW, FW bits + + mcr p15, 0, r1, c1, c1, 0 @ write SCR (with NS bit set) + + movs pc, lr @ return to non-secure SVC -- cgit v1.2.1