From 7588ad12bafe596c273e13cd80bb3bfbac0e08c7 Mon Sep 17 00:00:00 2001 From: Reinhard Meyer Date: Wed, 25 Aug 2010 12:32:53 +0200 Subject: AT91: add option to enable pullups in at91sam9260_devices.c Signed-off-by: Reinhard Meyer --- arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 35 ++++++++++++++++------- 1 file changed, 25 insertions(+), 10 deletions(-) (limited to 'arch/arm/cpu/arm926ejs/at91') diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c index 2d8848152a..87b04426b9 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c @@ -28,12 +28,27 @@ #include #include +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif + void at91_serial0_hw_init(void) { at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* RXD0 */ + at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD0 */ writel(1 << AT91SAM9260_ID_US0, &pmc->pcer); } @@ -42,7 +57,7 @@ void at91_serial1_hw_init(void) at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; at91_set_a_periph(AT91_PIO_PORTB, 6, 1); /* TXD1 */ - at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* RXD1 */ + at91_set_a_periph(AT91_PIO_PORTB, 7, PUP); /* RXD1 */ writel(1 << AT91SAM9260_ID_US1, &pmc->pcer); } @@ -51,7 +66,7 @@ void at91_serial2_hw_init(void) at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; at91_set_a_periph(AT91_PIO_PORTB, 8, 1); /* TXD2 */ - at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* RXD2 */ + at91_set_a_periph(AT91_PIO_PORTB, 9, PUP); /* RXD2 */ writel(1 << AT91SAM9260_ID_US2, &pmc->pcer); } @@ -59,7 +74,7 @@ void at91_serial3_hw_init(void) { at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; - at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* DRXD */ at91_set_a_periph(AT91_PIO_PORTB, 15, 1); /* DTXD */ writel(1 << AT91_ID_SYS, &pmc->pcer); } @@ -88,9 +103,9 @@ void at91_spi0_hw_init(unsigned long cs_mask) { at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; - at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */ + at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */ /* Enable clock */ writel(1 << AT91SAM9260_ID_SPI0, &pmc->pcer); @@ -125,9 +140,9 @@ void at91_spi1_hw_init(unsigned long cs_mask) { at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; - at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* SPI1_MISO */ - at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* SPI1_MOSI */ - at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* SPI1_SPCK */ + at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI1_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI1_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI1_SPCK */ /* Enable clock */ writel(1 << AT91SAM9260_ID_SPI1, &pmc->pcer); -- cgit v1.2.1