From d064cbffff37367b64b53f6e6942cbea67109237 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 23 Oct 2014 22:26:10 +0900 Subject: dm: serial: use Driver Model for UniPhier serial driver This commit converts UniPhier on-chip serial driver to driver model. Since UniPhier SoCs do not have Device Tree support, some board files should be added under arch/arm/cpu/armv7/uniphier/ph1-*/ directories. (Device Tree support for UniPhier platform is still under way.) Now the base address and master clock frequency are passed from platform data, so CONFIG_SYS_UNIPHIER_SERIAL_BASE* and CONFIG_SYS_UNIPHIER_UART_CLK should be removed. Tested on UniPhier PH1-LD4 ref board. Signed-off-by: Masahiro Yamada Acked-by: Simon Glass --- arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile | 1 + arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c | 15 ++ arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile | 1 + arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c | 15 ++ arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile | 1 + arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c | 15 ++ arch/arm/include/asm/arch-uniphier/platdevice.h | 24 +++ configs/ph1_ld4_defconfig | 2 + configs/ph1_pro4_defconfig | 2 + configs/ph1_sld8_defconfig | 2 + drivers/serial/serial_uniphier.c | 199 ++++++++-------------- include/configs/ph1_ld4.h | 2 - include/configs/ph1_pro4.h | 2 - include/configs/ph1_sld8.h | 2 - include/configs/uniphier-common.h | 7 +- include/dm/platform_data/serial-uniphier.h | 18 ++ 16 files changed, 172 insertions(+), 136 deletions(-) create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c create mode 100644 arch/arm/include/asm/arch-uniphier/platdevice.h create mode 100644 include/dm/platform_data/serial-uniphier.h diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile index b385e19544..781b511a97 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o +obj-y += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \ sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c new file mode 100644 index 0000000000..0047223181 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +#define UART_MASTER_CLK 36864000 + +SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) +SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) +SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) +SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile index 712afd1bee..e11f4f6d8b 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o +obj-y += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o sbc_init.o \ sg_init.o pll_init.o clkrst_init.o pinctrl.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c new file mode 100644 index 0000000000..6da921e920 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +#define UART_MASTER_CLK 73728000 + +SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) +SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) +SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) +SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile index b385e19544..781b511a97 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o +obj-y += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \ sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c new file mode 100644 index 0000000000..59d054a310 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +#define UART_MASTER_CLK 80000000 + +SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) +SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) +SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) +SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) diff --git a/arch/arm/include/asm/arch-uniphier/platdevice.h b/arch/arm/include/asm/arch-uniphier/platdevice.h new file mode 100644 index 0000000000..cdf7d132d4 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/platdevice.h @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_PLATDEVICE_H +#define ARCH_PLATDEVICE_H + +#include +#include + +#define SERIAL_DEVICE(n, ba, clk) \ +static struct uniphier_serial_platform_data serial_device##n = { \ + .base = ba, \ + .uartclk = clk \ +}; \ +U_BOOT_DEVICE(serial##n) = { \ + .name = DRIVER_NAME, \ + .platdata = &serial_device##n \ +}; + +#endif /* ARCH_PLATDEVICE_H */ diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig index 53f3126e71..c8404f8a8e 100644 --- a/configs/ph1_ld4_defconfig +++ b/configs/ph1_ld4_defconfig @@ -2,7 +2,9 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_UNIPHIER=y +S:CONFIG_MACH_PH1_LD4=y +CONFIG_DM=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 +CONFIG_DM_SERIAL=y S:CONFIG_SPL_NAND_DENALI=y diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig index 209466ebcb..5c051e36a0 100644 --- a/configs/ph1_pro4_defconfig +++ b/configs/ph1_pro4_defconfig @@ -2,7 +2,9 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_UNIPHIER=y +S:CONFIG_MACH_PH1_PRO4=y +CONFIG_DM=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 +CONFIG_DM_SERIAL=y S:CONFIG_SPL_NAND_DENALI=y diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig index 658977bcf6..2c636e60d1 100644 --- a/configs/ph1_sld8_defconfig +++ b/configs/ph1_sld8_defconfig @@ -2,7 +2,9 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_UNIPHIER=y +S:CONFIG_MACH_PH1_SLD8=y +CONFIG_DM=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 +CONFIG_DM_SERIAL=y S:CONFIG_SPL_NAND_DENALI=y diff --git a/drivers/serial/serial_uniphier.c b/drivers/serial/serial_uniphier.c index f8c9d921e2..9114b3ed60 100644 --- a/drivers/serial/serial_uniphier.c +++ b/drivers/serial/serial_uniphier.c @@ -2,14 +2,14 @@ * Copyright (C) 2012-2014 Panasonic Corporation * Author: Masahiro Yamada * - * Based on serial_ns16550.c - * (C) Copyright 2000 - * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. - * * SPDX-License-Identifier: GPL-2.0+ */ #include +#include +#include +#include +#include #include #define UART_REG(x) \ @@ -48,157 +48,104 @@ struct uniphier_serial { #define UART_LSR_DR 0x01 /* Data ready */ #define UART_LSR_THRE 0x20 /* Xmit holding register empty */ -DECLARE_GLOBAL_DATA_PTR; +struct uniphier_serial_private_data { + struct uniphier_serial __iomem *membase; +}; + +#define uniphier_serial_port(dev) \ + ((struct uniphier_serial_private_data *)dev_get_priv(dev))->membase -static void uniphier_serial_init(struct uniphier_serial *port) +int uniphier_serial_setbrg(struct udevice *dev, int baudrate) { + struct uniphier_serial_platform_data *plat = dev_get_platdata(dev); + struct uniphier_serial __iomem *port = uniphier_serial_port(dev); const unsigned int mode_x_div = 16; unsigned int divisor; writeb(UART_LCR_WLS_8, &port->lcr); - divisor = DIV_ROUND_CLOSEST(CONFIG_SYS_UNIPHIER_UART_CLK, - mode_x_div * gd->baudrate); + divisor = DIV_ROUND_CLOSEST(plat->uartclk, mode_x_div * baudrate); writew(divisor, &port->dlr); -} -static void uniphier_serial_setbrg(struct uniphier_serial *port) -{ - uniphier_serial_init(port); + return 0; } -static int uniphier_serial_tstc(struct uniphier_serial *port) +static int uniphier_serial_getc(struct udevice *dev) { - return (readb(&port->lsr) & UART_LSR_DR) != 0; -} + struct uniphier_serial __iomem *port = uniphier_serial_port(dev); -static int uniphier_serial_getc(struct uniphier_serial *port) -{ - while (!uniphier_serial_tstc(port)) - ; + if (!(readb(&port->lsr) & UART_LSR_DR)) + return -EAGAIN; return readb(&port->rbr); } -static void uniphier_serial_putc(struct uniphier_serial *port, const char c) +static int uniphier_serial_putc(struct udevice *dev, const char c) { - if (c == '\n') - uniphier_serial_putc(port, '\r'); + struct uniphier_serial __iomem *port = uniphier_serial_port(dev); - while (!(readb(&port->lsr) & UART_LSR_THRE)) - ; + if (!(readb(&port->lsr) & UART_LSR_THRE)) + return -EAGAIN; writeb(c, &port->thr); + + return 0; } -static struct uniphier_serial *serial_ports[4] = { -#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE0 - (struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE0, -#else - NULL, -#endif -#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE1 - (struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE1, -#else - NULL, -#endif -#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE2 - (struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE2, -#else - NULL, -#endif -#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE3 - (struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE3, -#else - NULL, -#endif -}; +int uniphier_serial_probe(struct udevice *dev) +{ + struct uniphier_serial_private_data *priv = dev_get_priv(dev); + struct uniphier_serial_platform_data *plat = dev_get_platdata(dev); -/* Multi serial device functions */ -#define DECLARE_ESERIAL_FUNCTIONS(port) \ - static int eserial##port##_init(void) \ - { \ - uniphier_serial_init(serial_ports[port]); \ - return 0 ; \ - } \ - static void eserial##port##_setbrg(void) \ - { \ - uniphier_serial_setbrg(serial_ports[port]); \ - } \ - static int eserial##port##_getc(void) \ - { \ - return uniphier_serial_getc(serial_ports[port]); \ - } \ - static int eserial##port##_tstc(void) \ - { \ - return uniphier_serial_tstc(serial_ports[port]); \ - } \ - static void eserial##port##_putc(const char c) \ - { \ - uniphier_serial_putc(serial_ports[port], c); \ - } - -/* Serial device descriptor */ -#define INIT_ESERIAL_STRUCTURE(port, __name) { \ - .name = __name, \ - .start = eserial##port##_init, \ - .stop = NULL, \ - .setbrg = eserial##port##_setbrg, \ - .getc = eserial##port##_getc, \ - .tstc = eserial##port##_tstc, \ - .putc = eserial##port##_putc, \ - .puts = default_serial_puts, \ -} + priv->membase = map_sysmem(plat->base, sizeof(struct uniphier_serial)); -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE0) -DECLARE_ESERIAL_FUNCTIONS(0); -struct serial_device uniphier_serial0_device = - INIT_ESERIAL_STRUCTURE(0, "ttyS0"); -#endif -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE1) -DECLARE_ESERIAL_FUNCTIONS(1); -struct serial_device uniphier_serial1_device = - INIT_ESERIAL_STRUCTURE(1, "ttyS1"); -#endif -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE2) -DECLARE_ESERIAL_FUNCTIONS(2); -struct serial_device uniphier_serial2_device = - INIT_ESERIAL_STRUCTURE(2, "ttyS2"); -#endif -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE3) -DECLARE_ESERIAL_FUNCTIONS(3); -struct serial_device uniphier_serial3_device = - INIT_ESERIAL_STRUCTURE(3, "ttyS3"); -#endif + if (!priv->membase) + return -ENOMEM; -__weak struct serial_device *default_serial_console(void) + return 0; +} + +int uniphier_serial_remove(struct udevice *dev) { -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE0) - return &uniphier_serial0_device; -#elif defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE1) - return &uniphier_serial1_device; -#elif defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE2) - return &uniphier_serial2_device; -#elif defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE3) - return &uniphier_serial3_device; -#else -#error "No uniphier serial ports configured." -#endif + unmap_sysmem(uniphier_serial_port(dev)); + + return 0; } -void uniphier_serial_initialize(void) +#ifdef CONFIG_OF_CONTROL +static const struct udevice_id uniphier_uart_of_match = { + { .compatible = "panasonic,uniphier-uart"}, + {}, +}; + +static int uniphier_serial_ofdata_to_platdata(struct udevice *dev) { -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE0) - serial_register(&uniphier_serial0_device); -#endif -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE1) - serial_register(&uniphier_serial1_device); -#endif -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE2) - serial_register(&uniphier_serial2_device); -#endif -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE3) - serial_register(&uniphier_serial3_device); -#endif + /* + * TODO: Masahiro Yamada (yamada.m@jp.panasonic.com) + * + * Implement conversion code from DTB to platform data + * when supporting CONFIG_OF_CONTROL on UniPhir platform. + */ } +#endif + +static const struct dm_serial_ops uniphier_serial_ops = { + .setbrg = uniphier_serial_setbrg, + .getc = uniphier_serial_getc, + .putc = uniphier_serial_putc, +}; + +U_BOOT_DRIVER(uniphier_serial) = { + .name = DRIVER_NAME, + .id = UCLASS_SERIAL, + .of_match = of_match_ptr(uniphier_uart_of_match), + .ofdata_to_platdata = of_match_ptr(uniphier_serial_ofdata_to_platdata), + .probe = uniphier_serial_probe, + .remove = uniphier_serial_remove, + .priv_auto_alloc_size = sizeof(struct uniphier_serial_private_data), + .platdata_auto_alloc_size = + sizeof(struct uniphier_serial_platform_data), + .ops = &uniphier_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/include/configs/ph1_ld4.h b/include/configs/ph1_ld4.h index a28d7b579a..a546865937 100644 --- a/include/configs/ph1_ld4.h +++ b/include/configs/ph1_ld4.h @@ -34,8 +34,6 @@ #define CONFIG_SYS_NS16550_SERIAL #endif -#define CONFIG_SYS_UNIPHIER_UART_CLK 36864000 - #define CONFIG_SMC911X #define CONFIG_DDR_NUM_CH0 1 diff --git a/include/configs/ph1_pro4.h b/include/configs/ph1_pro4.h index b79967f7da..85c14ba6cd 100644 --- a/include/configs/ph1_pro4.h +++ b/include/configs/ph1_pro4.h @@ -34,8 +34,6 @@ #define CONFIG_SYS_NS16550_SERIAL #endif -#define CONFIG_SYS_UNIPHIER_UART_CLK 73728000 - #define CONFIG_SMC911X #define CONFIG_DDR_NUM_CH0 2 diff --git a/include/configs/ph1_sld8.h b/include/configs/ph1_sld8.h index 9d391f1d74..41e2299bee 100644 --- a/include/configs/ph1_sld8.h +++ b/include/configs/ph1_sld8.h @@ -34,8 +34,6 @@ #define CONFIG_SYS_NS16550_SERIAL #endif -#define CONFIG_SYS_UNIPHIER_UART_CLK 80000000 - #define CONFIG_SMC911X #define CONFIG_DDR_NUM_CH0 1 diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier-common.h index 18fe277cad..b18ae6dfae 100644 --- a/include/configs/uniphier-common.h +++ b/include/configs/uniphier-common.h @@ -33,18 +33,17 @@ are defined. Select only one of them." # define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00200000) #endif +#ifdef CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_COM1 CONFIG_SUPPORT_CARD_UART_BASE #define CONFIG_SYS_NS16550_CLK 12288000 #define CONFIG_SYS_NS16550_REG_SIZE -2 +#endif #define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE #define CONFIG_SMC911X_32_BIT -#define CONFIG_SYS_UNIPHIER_SERIAL_BASE0 0x54006800 -#define CONFIG_SYS_UNIPHIER_SERIAL_BASE1 0x54006900 -#define CONFIG_SYS_UNIPHIER_SERIAL_BASE2 0x54006a00 -#define CONFIG_SYS_UNIPHIER_SERIAL_BASE3 0x54006b00 +#define CONFIG_SYS_MALLOC_F_LEN 0x7000 /*----------------------------------------------------------------------- * MMU and Cache Setting diff --git a/include/dm/platform_data/serial-uniphier.h b/include/dm/platform_data/serial-uniphier.h new file mode 100644 index 0000000000..52343e34ee --- /dev/null +++ b/include/dm/platform_data/serial-uniphier.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PLAT_UNIPHIER_SERIAL_H +#define __PLAT_UNIPHIER_SERIAL_H + +#define DRIVER_NAME "uniphier-uart" + +struct uniphier_serial_platform_data { + unsigned long base; + unsigned int uartclk; +}; + +#endif /* __PLAT_UNIPHIER_SERIAL_H */ -- cgit v1.2.1