From b90c045f035c3cc9b5d2edaed6048dfb74e40763 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 24 Sep 2007 00:08:37 +0200 Subject: synchronizition with mainline --- Makefile | 11 +- board/xilinx/xupv2p/Makefile | 21 ++- board/xilinx/xupv2p/config.mk | 6 +- board/xilinx/xupv2p/xparameters.h | 27 ++- common/cmd_jffs2.c | 36 +--- common/cmd_mfsl.c | 11 +- cpu/microblaze/cache.c | 2 +- cpu/microblaze/start.S | 6 +- cpu/microblaze/timer.c | 7 - drivers/net/Makefile | 3 +- drivers/net/xilinx_emac.c | 374 ------------------------------------- drivers/net/xilinx_emac.h | 148 --------------- drivers/net/xilinx_emaclite.c | 376 -------------------------------------- drivers/serial_xuartlite.c | 2 +- fs/Makefile | 2 +- fs/romfs/Makefile | 49 ----- fs/romfs/romfs.c | 240 ------------------------ include/configs/ml401.h | 50 ++--- include/configs/suzaku.h | 18 +- include/configs/xupv2p.h | 63 +++---- lib_microblaze/time.c | 8 - 21 files changed, 119 insertions(+), 1341 deletions(-) delete mode 100644 drivers/net/xilinx_emac.c delete mode 100644 drivers/net/xilinx_emac.h delete mode 100644 drivers/net/xilinx_emaclite.c delete mode 100644 fs/romfs/Makefile delete mode 100644 fs/romfs/romfs.c diff --git a/Makefile b/Makefile index 63e7dcb01d..8d500f5349 100644 --- a/Makefile +++ b/Makefile @@ -144,7 +144,7 @@ ifeq ($(ARCH),m68k) CROSS_COMPILE = m68k-elf- endif ifeq ($(ARCH),microblaze) -CROSS_COMPILE = microblaze-uclinux- +CROSS_COMPILE = mb- endif ifeq ($(ARCH),blackfin) CROSS_COMPILE = bfin-uclinux- @@ -201,9 +201,8 @@ ifeq ($(CPU),ixp) LIBS += cpu/ixp/npe/libnpe.a endif LIBS += lib_$(ARCH)/lib$(ARCH).a -LIBS += fs/cramfs/libcramfs.a fs/ext2/libext2fs.a fs/fat/libfat.a \ - fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a \ - fs/romfs/libromfs.a +LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \ + fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a LIBS += net/libnet.a LIBS += disk/libdisk.a LIBS += rtc/librtc.a @@ -326,14 +325,14 @@ depend dep: version tags ctags: ctags -w -o $(OBJTREE)/ctags `find $(SUBDIRS) include \ lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \ - fs/cramfs fs/fat fs/fdos fs/jffs2 fs/romfs\ + fs/cramfs fs/fat fs/fdos fs/jffs2 \ net disk rtc dtt drivers drivers/sk98lin common \ \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` etags: etags -a -o $(OBJTREE)/etags `find $(SUBDIRS) include \ lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \ - fs/cramfs fs/fat fs/fdos fs/jffs2 fs/romfs\ + fs/cramfs fs/fat fs/fdos fs/jffs2 \ net disk rtc dtt drivers drivers/sk98lin common \ \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` diff --git a/board/xilinx/xupv2p/Makefile b/board/xilinx/xupv2p/Makefile index 99e7047350..9ab5633626 100644 --- a/board/xilinx/xupv2p/Makefile +++ b/board/xilinx/xupv2p/Makefile @@ -22,17 +22,32 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +$(shell mkdir -p $(obj)../xilinx_enet) +endif + +INCS := -I../common -I../xilinx_enet +CFLAGS += $(INCS) +HOST_CFLAGS += $(INCS) LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o +COBJS = $(BOARD).o \ + ../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \ + ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \ + ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \ + ../xilinx_enet/xemac_intr_dma.o ../common/xipif_v1_23_b.o \ + ../common/xbasic_types.o ../common/xdma_channel.o \ + ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \ + ../common/xversion.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $^ clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/xilinx/xupv2p/config.mk b/board/xilinx/xupv2p/config.mk index eedfb24d4f..c07b0b35b1 100644 --- a/board/xilinx/xupv2p/config.mk +++ b/board/xilinx/xupv2p/config.mk @@ -25,8 +25,8 @@ # Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4 # -TEXT_BASE = 0x30000000 +TEXT_BASE = 0x38000000 -PLATFORM_CPPFLAGS += -mxl-pattern-compare PLATFORM_CPPFLAGS += -mno-xl-soft-mul -PLATFORM_CPPFLAGS += -mcpu=v5.00.c +PLATFORM_CPPFLAGS += -mno-xl-soft-div +PLATFORM_CPPFLAGS += -mxl-barrel-shift diff --git a/board/xilinx/xupv2p/xparameters.h b/board/xilinx/xupv2p/xparameters.h index 0bb7a805f4..a96c693c55 100644 --- a/board/xilinx/xupv2p/xparameters.h +++ b/board/xilinx/xupv2p/xparameters.h @@ -28,24 +28,17 @@ /* System Clock Frequency */ #define XILINX_CLOCK_FREQ 100000000 -/* Microblaze is microblaze_0 */ -#define XILINX_USE_MSR_INSTR 1 -#define XILINX_PVR 0 -#define XILINX_FSL_NUMBER 0 - /* Interrupt controller is opb_intc_0 */ #define XILINX_INTC_BASEADDR 0x41200000 -#define XILINX_INTC_NUM_INTR_INPUTS 7 +#define XILINX_INTC_NUM_INTR_INPUTS 11 /* Timer pheriphery is opb_timer_1 */ #define XILINX_TIMER_BASEADDR 0x41c00000 -#define XILINX_TIMER_IRQ 0 +#define XILINX_TIMER_IRQ 1 /* Uart pheriphery is RS232_Uart_1 */ -#define XILINX_UARTLITE_BASEADDR 0x40600000 -#define XILINX_UARTLITE_BAUDRATE 115200 - -/* IIC doesn't exist */ +#define XILINX_UART_BASEADDR 0x40600000 +#define XILINX_UART_BAUDRATE 115200 /* GPIO is LEDs_4Bit*/ #define XILINX_GPIO_BASEADDR 0x40000000 @@ -58,10 +51,14 @@ /* Sysace Controller is SysACE_CompactFlash */ #define XILINX_SYSACE_BASEADDR 0x41800000 +#define XILINX_SYSACE_HIGHADDR 0x4180ffff #define XILINX_SYSACE_MEM_WIDTH 16 /* Ethernet controller is Ethernet_MAC */ -#define XILINX_EMAC_BASEADDR 0x40c00000 -#define XILINX_EMAC_DMA_PRESENT 3 -#define XILINX_EMAC_HALF_DUPLEX_EXIST 1 -#define XILINX_EMAC_MII_EXIST 1 +#define XPAR_XEMAC_NUM_INSTANCES 1 +#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0 +#define XPAR_OPB_ETHERNET_0_BASEADDR 0x40c00000 +#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x40c0ffff +#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1 +#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1 +#define XPAR_OPB_ETHERNET_0_MII_EXIST 1 diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c index 3e6061a520..513a226c43 100644 --- a/common/cmd_jffs2.c +++ b/common/cmd_jffs2.c @@ -85,7 +85,7 @@ */ /* - * JFFS2/CRAMFS/ROMFS support + * JFFS2/CRAMFS support */ #include #include @@ -175,11 +175,6 @@ extern int cramfs_load (char *loadoffset, struct part_info *info, char *filename extern int cramfs_ls (struct part_info *info, char *filename); extern int cramfs_info (struct part_info *info); -extern int romfs_check (struct part_info *info); -extern int romfs_load (char *loadoffset, struct part_info *info, char *filename); -extern int romfs_ls (struct part_info *info, char *filename); -extern int romfs_info (struct part_info *info); - static struct part_info* jffs2_part_info(struct mtd_device *dev, unsigned int part_num); /* command line only routines */ @@ -1879,22 +1874,14 @@ int do_jffs2_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if ((part = jffs2_part_info(current_dev, current_partnum))){ - /* check partition type for JFFS2, cramfs, romfs */ - if (cramfs_check(part)) { - fsname = "CRAMFS"; - } else if (romfs_check(part)) { - fsname = "ROMFS"; - } else { - fsname = "JFFS2"; - } + /* check partition type for cramfs */ + fsname = (cramfs_check(part) ? "CRAMFS" : "JFFS2"); printf("### %s loading '%s' to 0x%lx\n", fsname, filename, offset); if (cramfs_check(part)) { size = cramfs_load ((char *) offset, part, filename); - } else if (romfs_check(part)){ - size = romfs_load ((char *) offset, part, filename); } else { - /* if this is not cramfs or romfs assume jffs2 */ + /* if this is not cramfs assume jffs2 */ size = jffs2_1pass_load((char *)offset, part, filename); } @@ -1941,10 +1928,8 @@ int do_jffs2_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /* check partition type for cramfs */ if (cramfs_check(part)) { ret = cramfs_ls (part, filename); - } else if (romfs_check(part)) { - ret = romfs_ls (part, filename); } else { - /* if this is not cramfs or romfs assume jffs2 */ + /* if this is not cramfs assume jffs2 */ ret = jffs2_1pass_ls(part, filename); } @@ -1966,6 +1951,7 @@ int do_jffs2_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) int do_jffs2_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { struct part_info *part; + char *fsname; int ret; /* make sure we are in sync with env variables */ @@ -1975,17 +1961,13 @@ int do_jffs2_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if ((part = jffs2_part_info(current_dev, current_partnum))){ /* check partition type for cramfs */ - puts("### filesystem type is "); + fsname = (cramfs_check(part) ? "CRAMFS" : "JFFS2"); + printf("### filesystem type is %s\n", fsname); if (cramfs_check(part)) { - puts("CRAMFS\n"); ret = cramfs_info (part); - } else if (romfs_check(part)) { - puts("ROMFS\n"); - ret = romfs_info (part); } else { - /* if this is not cramfs or romfs assume jffs2 */ - puts("JFFS2\n"); + /* if this is not cramfs assume jffs2 */ ret = jffs2_1pass_info(part); } diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c index 93cc873b05..8d4c1a38d7 100644 --- a/common/cmd_mfsl.c +++ b/common/cmd_mfsl.c @@ -357,7 +357,7 @@ int do_rspr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) reg = (unsigned int)simple_strtoul (argv[1], NULL, 16); val = (unsigned int)simple_strtoul (argv[2], NULL, 16); - if (argc < 2) { + if (argc < 1) { printf ("Usage:\n%s\n", cmdtp->usage); return 1; } @@ -382,7 +382,6 @@ int do_rspr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) puts ("ESR"); break; default: - puts ("Unsupported register\n"); return 1; } printf (": 0x%08lx\n", val); @@ -409,10 +408,10 @@ U_BOOT_CMD (fwr, 4, 1, do_fwr, " 3 - blocking control write\n"); U_BOOT_CMD (rspr, 3, 1, do_rspr, - "rspr - read/write special purpose register\n", + "rmsr - read/write special purpose register\n", "- reg_num [write value] read/write special purpose register\n" - " 1 - MSR - Machine status register\n" - " 3 - EAR - Exception address register\n" - " 5 - ESR - Exception status register\n"); + " 0 - MSR - Machine status register\n" + " 1 - EAR - Exception address register\n" + " 2 - ESR - Exception status register\n"); #endif diff --git a/cpu/microblaze/cache.c b/cpu/microblaze/cache.c index 4b7866fae5..6ce0b55b24 100644 --- a/cpu/microblaze/cache.c +++ b/cpu/microblaze/cache.c @@ -1,7 +1,7 @@ /* * (C) Copyright 2007 Michal Simek * - * Michal SIMEK + * Michal SIMEK * * See file CREDITS for list of people who contributed to this * project. diff --git a/cpu/microblaze/start.S b/cpu/microblaze/start.S index 8740284ad8..3c027ff9bb 100644 --- a/cpu/microblaze/start.S +++ b/cpu/microblaze/start.S @@ -33,13 +33,15 @@ _start: addi r1, r0, CFG_INIT_SP_OFFSET addi r1, r1, -4 /* Decrement SP to top of memory */ /* add opcode instruction for 32bit jump - 2 instruction imm & brai*/ - addi r6, r0, 0xb0000000 /* hex b000 opcode imm */ + addi r6, r0, 0xb000 /* hex b000 opcode imm */ + bslli r6, r6, 16 /* shift */ swi r6, r0, 0x0 /* reset address */ swi r6, r0, 0x8 /* user vector exception */ swi r6, r0, 0x10 /* interrupt */ swi r6, r0, 0x20 /* hardware exception */ - addi r6, r0, 0xb8080000 /* hew b808 opcode brai*/ + addi r6, r0, 0xb808 /* hew b808 opcode brai*/ + bslli r6, r6, 16 swi r6, r0, 0x4 /* reset address */ swi r6, r0, 0xC /* user vector exception */ swi r6, r0, 0x14 /* interrupt */ diff --git a/cpu/microblaze/timer.c b/cpu/microblaze/timer.c index b350453443..ab1cb12749 100644 --- a/cpu/microblaze/timer.c +++ b/cpu/microblaze/timer.c @@ -33,17 +33,10 @@ void reset_timer (void) timestamp = 0; } -#ifdef CFG_TIMER_0 ulong get_timer (ulong base) { return (timestamp - base); } -#else -ulong get_timer (ulong base) -{ - return (timestamp++ - base); -} -#endif void set_timer (ulong t) { diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 063985984e..37d69b9949 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -24,7 +24,8 @@ include $(TOPDIR)/config.mk LIB := $(obj)libnet.a -COBJS := mcffec.o xilinx_emac.o xilinx_emaclite.o + +COBJS := mcffec.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/drivers/net/xilinx_emac.c b/drivers/net/xilinx_emac.c deleted file mode 100644 index 36e627aae5..0000000000 --- a/drivers/net/xilinx_emac.c +++ /dev/null @@ -1,374 +0,0 @@ -/* - * (C) Copyright 2007 Michal Simek - * - * Michal SIMEK - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Based on Xilinx drivers - * - */ - -#include -#include -#include -#include -#include "xilinx_emac.h" - -#ifdef XILINX_EMAC - -#undef DEBUG - -#define ENET_MAX_MTU PKTSIZE -#define ENET_ADDR_LENGTH 6 - -static unsigned int etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */ - -static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 }; - -static xemac emac; - -void eth_halt(void) -{ -#ifdef DEBUG - puts ("eth_halt\n"); -#endif -} - -int eth_init(bd_t * bis) -{ - u32 helpreg; -#ifdef DEBUG - printf("EMAC Initialization Started\n\r"); -#endif - if (emac.isstarted) { - puts("Emac is started\n"); - return 0; - } - - memset (&emac, 0, sizeof (xemac)); - - emac.baseaddress = XILINX_EMAC_BASEADDR; - - /* Setting up FIFOs */ - emac.recvfifo.regbaseaddress = emac.baseaddress + - XEM_PFIFO_RXREG_OFFSET; - emac.recvfifo.databaseaddress = emac.baseaddress + - XEM_PFIFO_RXDATA_OFFSET; - out_be32 (emac.recvfifo.regbaseaddress, XPF_RESET_FIFO_MASK); - - emac.sendfifo.regbaseaddress = emac.baseaddress + - XEM_PFIFO_TXREG_OFFSET; - emac.sendfifo.databaseaddress = emac.baseaddress + - XEM_PFIFO_TXDATA_OFFSET; - out_be32 (emac.sendfifo.regbaseaddress, XPF_RESET_FIFO_MASK); - - /* Reset the entire IPIF */ - out_be32 (emac.baseaddress + XIIF_V123B_RESETR_OFFSET, - XIIF_V123B_RESET_MASK); - - /* Stopping EMAC for setting up MAC */ - helpreg = in_be32 (emac.baseaddress + XEM_ECR_OFFSET); - helpreg &= ~(XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK); - out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg); - - if (!getenv("ethaddr")) { - memcpy(bis->bi_enetaddr, emacaddr, ENET_ADDR_LENGTH); - } - - /* Set the device station address high and low registers */ - helpreg = (bis->bi_enetaddr[0] << 8) | bis->bi_enetaddr[1]; - out_be32 (emac.baseaddress + XEM_SAH_OFFSET, helpreg); - helpreg = (bis->bi_enetaddr[2] << 24) | (bis->bi_enetaddr[3] << 16) | - (bis->bi_enetaddr[4] << 8) | bis->bi_enetaddr[5]; - out_be32 (emac.baseaddress + XEM_SAL_OFFSET, helpreg); - - - helpreg = XEM_ECR_UNICAST_ENABLE_MASK | XEM_ECR_BROAD_ENABLE_MASK | - XEM_ECR_FULL_DUPLEX_MASK | XEM_ECR_XMIT_FCS_ENABLE_MASK | - XEM_ECR_XMIT_PAD_ENABLE_MASK | XEM_ECR_PHY_ENABLE_MASK; - out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg); - - emac.isstarted = 1; - - /* Enable the transmitter, and receiver */ - helpreg = in_be32 (emac.baseaddress + XEM_ECR_OFFSET); - helpreg &= ~(XEM_ECR_XMIT_RESET_MASK | XEM_ECR_RECV_RESET_MASK); - helpreg |= (XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK); - out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg); - - printf("EMAC Initialization complete\n\r"); - return 0; -} - -int eth_send(volatile void *ptr, int len) -{ - u32 intrstatus; - u32 xmitstatus; - u32 fifocount; - u32 wordcount; - u32 extrabytecount; - u32 *wordbuffer = (u32 *) ptr; - - if (len > ENET_MAX_MTU) - len = ENET_MAX_MTU; - - /* - * Check for overruns and underruns for the transmit status and length - * FIFOs and make sure the send packet FIFO is not deadlocked. - * Any of these conditions is bad enough that we do not want to - * continue. The upper layer software should reset the device to resolve - * the error. - */ - intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET); - if (intrstatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK | - XEM_EIR_XMIT_LFIFO_OVER_MASK)) { -#ifdef DEBUG - puts ("Transmitting overrun error\n"); -#endif - return 0; - } else if (intrstatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK | - XEM_EIR_XMIT_LFIFO_UNDER_MASK)) { -#ifdef DEBUG - puts ("Transmitting underrun error\n"); -#endif - return 0; - } else if (in_be32 (emac.sendfifo.regbaseaddress + - XPF_COUNT_STATUS_REG_OFFSET) & XPF_DEADLOCK_MASK) { -#ifdef DEBUG - puts("Transmitting fifo error\n"); -#endif - return 0; - } - - /* - * Before writing to the data FIFO, make sure the length FIFO is not - * full. The data FIFO might not be full yet even though the length FIFO - * is. This avoids an overrun condition on the length FIFO and keeps the - * FIFOs in sync. - * - * Clear the latched LFIFO_FULL bit so next time around the most - * current status is represented - */ - if (intrstatus & XEM_EIR_XMIT_LFIFO_FULL_MASK) { - out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET, - intrstatus & XEM_EIR_XMIT_LFIFO_FULL_MASK); -#ifdef DEBUG - puts ("Fifo is full\n"); -#endif - return 0; - } - - /* get the count of how many words may be inserted into the FIFO */ - fifocount = in_be32 (emac.sendfifo.regbaseaddress + - XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK; - wordcount = len >> 2; - extrabytecount = len & 0x3; - - if (fifocount < wordcount) { -#ifdef DEBUG - puts ("Sending packet is larger then size of FIFO\n"); -#endif - return 0; - } - - for (fifocount = 0; fifocount < wordcount; fifocount++) { - out_be32 (emac.sendfifo.databaseaddress, wordbuffer[fifocount]); - } - if (extrabytecount > 0) { - u32 lastword = 0; - u8 *extrabytesbuffer = (u8 *) (wordbuffer + wordcount); - - if (extrabytecount == 1) { - lastword = extrabytesbuffer[0] << 24; - } else if (extrabytecount == 2) { - lastword = extrabytesbuffer[0] << 24 | - extrabytesbuffer[1] << 16; - } else if (extrabytecount == 3) { - lastword = extrabytesbuffer[0] << 24 | - extrabytesbuffer[1] << 16 | - extrabytesbuffer[2] << 8; - } - out_be32 (emac.sendfifo.databaseaddress, lastword); - } - - /* Loop on the MAC's status to wait for any pause to complete */ - intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET); - while ((intrstatus & XEM_EIR_XMIT_PAUSE_MASK) != 0) { - intrstatus = in_be32 ((emac.baseaddress) + - XIIF_V123B_IISR_OFFSET); - /* Clear the pause status from the transmit status register */ - out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET, - intrstatus & XEM_EIR_XMIT_PAUSE_MASK); - } - - /* - * Set the MAC's transmit packet length register to tell it to transmit - */ - out_be32 (emac.baseaddress + XEM_TPLR_OFFSET, len); - - /* - * Loop on the MAC's status to wait for the transmit to complete. - * The transmit status is in the FIFO when the XMIT_DONE bit is set. - */ - do { - intrstatus = in_be32 ((emac.baseaddress) + - XIIF_V123B_IISR_OFFSET); - } - while ((intrstatus & XEM_EIR_XMIT_DONE_MASK) == 0); - - xmitstatus = in_be32 (emac.baseaddress + XEM_TSR_OFFSET); - - if (intrstatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK | - XEM_EIR_XMIT_LFIFO_OVER_MASK)) { -#ifdef DEBUG - puts ("Transmitting overrun error\n"); -#endif - return 0; - } else if (intrstatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK | - XEM_EIR_XMIT_LFIFO_UNDER_MASK)) { -#ifdef DEBUG - puts ("Transmitting underrun error\n"); -#endif - return 0; - } - - /* Clear the interrupt status register of transmit statuses */ - out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET, - intrstatus & XEM_EIR_XMIT_ALL_MASK); - - /* - * Collision errors are stored in the transmit status register - * instead of the interrupt status register - */ - if ((xmitstatus & XEM_TSR_EXCESS_DEFERRAL_MASK) || - (xmitstatus & XEM_TSR_LATE_COLLISION_MASK)) { -#ifdef DEBUG - puts ("Transmitting collision error\n"); -#endif - return 0; - } - return 1; -} - -int eth_rx(void) -{ - u32 pktlength; - u32 intrstatus; - u32 fifocount; - u32 wordcount; - u32 extrabytecount; - u32 lastword; - u8 *extrabytesbuffer; - - if (in_be32 (emac.recvfifo.regbaseaddress + XPF_COUNT_STATUS_REG_OFFSET) - & XPF_DEADLOCK_MASK) { - out_be32 (emac.recvfifo.regbaseaddress, XPF_RESET_FIFO_MASK); -#ifdef DEBUG - puts ("Receiving FIFO deadlock\n"); -#endif - return 0; - } - - /* - * Get the interrupt status to know what happened (whether an error - * occurred and/or whether frames have been received successfully). - * When clearing the intr status register, clear only statuses that - * pertain to receive. - */ - intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET); - /* - * Before reading from the length FIFO, make sure the length FIFO is not - * empty. We could cause an underrun error if we try to read from an - * empty FIFO. - */ - if (!(intrstatus & XEM_EIR_RECV_DONE_MASK)) { -#ifdef DEBUG - /* puts("Receiving FIFO is empty\n"); */ -#endif - return 0; - } - - /* - * Determine, from the MAC, the length of the next packet available - * in the data FIFO (there should be a non-zero length here) - */ - pktlength = in_be32 (emac.baseaddress + XEM_RPLR_OFFSET); - if (!pktlength) { - return 0; - } - - /* - * Write the RECV_DONE bit in the status register to clear it. This bit - * indicates the RPLR is non-empty, and we know it's set at this point. - * We clear it so that subsequent entry into this routine will reflect - * the current status. This is done because the non-empty bit is latched - * in the IPIF, which means it may indicate a non-empty condition even - * though there is something in the FIFO. - */ - out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET, - XEM_EIR_RECV_DONE_MASK); - - fifocount = in_be32 (emac.recvfifo.regbaseaddress + - XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK; - - if ((fifocount * 4) < pktlength) { -#ifdef DEBUG - puts ("Receiving FIFO is smaller than packet size.\n"); -#endif - return 0; - } - - wordcount = pktlength >> 2; - extrabytecount = pktlength & 0x3; - - for (fifocount = 0; fifocount < wordcount; fifocount++) { - etherrxbuff[fifocount] = - in_be32 (emac.recvfifo.databaseaddress); - } - - /* - * if there are extra bytes to handle, read the last word from the FIFO - * and insert the extra bytes into the buffer - */ - if (extrabytecount > 0) { - extrabytesbuffer = (u8 *) (etherrxbuff + wordcount); - - lastword = in_be32 (emac.recvfifo.databaseaddress); - - /* - * one extra byte in the last word, put the byte into the next - * location of the buffer, bytes in a word of the FIFO are - * ordered from most significant byte to least - */ - if (extrabytecount == 1) { - extrabytesbuffer[0] = (u8) (lastword >> 24); - } else if (extrabytecount == 2) { - extrabytesbuffer[0] = (u8) (lastword >> 24); - extrabytesbuffer[1] = (u8) (lastword >> 16); - } else if (extrabytecount == 3) { - extrabytesbuffer[0] = (u8) (lastword >> 24); - extrabytesbuffer[1] = (u8) (lastword >> 16); - extrabytesbuffer[2] = (u8) (lastword >> 8); - } - } - NetReceive((uchar *)etherrxbuff, pktlength); - return 1; -} -#endif diff --git a/drivers/net/xilinx_emac.h b/drivers/net/xilinx_emac.h deleted file mode 100644 index 966598e27a..0000000000 --- a/drivers/net/xilinx_emac.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * (C) Copyright 2007 Michal Simek - * - * Michal SIMEK - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Based on Xilinx drivers - * - */ - -typedef struct { - u32 regbaseaddress; /* Base address of registers */ - u32 databaseaddress; /* Base address of data for FIFOs */ -} xpacketfifov100b; - -typedef struct { - u32 baseaddress; /* Base address (of IPIF) */ - u32 isstarted; /* Device is currently started 0-no, 1-yes */ - xpacketfifov100b recvfifo; /* FIFO used to receive frames */ - xpacketfifov100b sendfifo; /* FIFO used to send frames */ -} xemac; - -#define XIIF_V123B_IISR_OFFSET 32UL /* IP interrupt status register */ -#define XIIF_V123B_RESET_MASK 0xAUL -#define XIIF_V123B_RESETR_OFFSET 64UL /* reset register */ - -/* This constant is used with the Reset Register */ -#define XPF_RESET_FIFO_MASK 0x0000000A -#define XPF_COUNT_STATUS_REG_OFFSET 4UL - -/* These constants are used with the Occupancy/Vacancy Count Register. This - * register also contains FIFO status */ -#define XPF_COUNT_MASK 0x0000FFFF -#define XPF_DEADLOCK_MASK 0x20000000 - -/* Offset of the MAC registers from the IPIF base address */ -#define XEM_REG_OFFSET 0x1100UL - -/* - * Register offsets for the Ethernet MAC. Each register is 32 bits. - */ -#define XEM_ECR_OFFSET (XEM_REG_OFFSET + 0x4) /* MAC Control */ -#define XEM_SAH_OFFSET (XEM_REG_OFFSET + 0xC) /* Station addr, high */ -#define XEM_SAL_OFFSET (XEM_REG_OFFSET + 0x10) /* Station addr, low */ -#define XEM_RPLR_OFFSET (XEM_REG_OFFSET + 0x1C) /* Rx packet length */ -#define XEM_TPLR_OFFSET (XEM_REG_OFFSET + 0x20) /* Tx packet length */ -#define XEM_TSR_OFFSET (XEM_REG_OFFSET + 0x24) /* Tx status */ - - - -#define XEM_PFIFO_OFFSET 0x2000UL -/* Tx registers */ -#define XEM_PFIFO_TXREG_OFFSET (XEM_PFIFO_OFFSET + 0x0) -/* Rx registers */ -#define XEM_PFIFO_RXREG_OFFSET (XEM_PFIFO_OFFSET + 0x10) -/* Tx keyhole */ -#define XEM_PFIFO_TXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x100) -/* Rx keyhole */ -#define XEM_PFIFO_RXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x200) - - -/* - * EMAC Interrupt Registers (Status and Enable) masks. These registers are - * part of the IPIF IP Interrupt registers - */ -/* A mask for all transmit interrupts, used in polled mode */ -#define XEM_EIR_XMIT_ALL_MASK (XEM_EIR_XMIT_DONE_MASK |\ - XEM_EIR_XMIT_ERROR_MASK | \ - XEM_EIR_XMIT_SFIFO_EMPTY_MASK |\ - XEM_EIR_XMIT_LFIFO_FULL_MASK) - -/* Xmit complete */ -#define XEM_EIR_XMIT_DONE_MASK 0x00000001UL -/* Recv complete */ -#define XEM_EIR_RECV_DONE_MASK 0x00000002UL -/* Xmit error */ -#define XEM_EIR_XMIT_ERROR_MASK 0x00000004UL -/* Recv error */ -#define XEM_EIR_RECV_ERROR_MASK 0x00000008UL -/* Xmit status fifo empty */ -#define XEM_EIR_XMIT_SFIFO_EMPTY_MASK 0x00000010UL -/* Recv length fifo empty */ -#define XEM_EIR_RECV_LFIFO_EMPTY_MASK 0x00000020UL -/* Xmit length fifo full */ -#define XEM_EIR_XMIT_LFIFO_FULL_MASK 0x00000040UL -/* Recv length fifo overrun */ -#define XEM_EIR_RECV_LFIFO_OVER_MASK 0x00000080UL -/* Recv length fifo underrun */ -#define XEM_EIR_RECV_LFIFO_UNDER_MASK 0x00000100UL -/* Xmit status fifo overrun */ -#define XEM_EIR_XMIT_SFIFO_OVER_MASK 0x00000200UL -/* Transmit status fifo underrun */ -#define XEM_EIR_XMIT_SFIFO_UNDER_MASK 0x00000400UL -/* Transmit length fifo overrun */ -#define XEM_EIR_XMIT_LFIFO_OVER_MASK 0x00000800UL -/* Transmit length fifo underrun */ -#define XEM_EIR_XMIT_LFIFO_UNDER_MASK 0x00001000UL -/* Transmit pause pkt received */ -#define XEM_EIR_XMIT_PAUSE_MASK 0x00002000UL - -/* - * EMAC Control Register (ECR) - */ -/* Full duplex mode */ -#define XEM_ECR_FULL_DUPLEX_MASK 0x80000000UL -/* Reset transmitter */ -#define XEM_ECR_XMIT_RESET_MASK 0x40000000UL -/* Enable transmitter */ -#define XEM_ECR_XMIT_ENABLE_MASK 0x20000000UL -/* Reset receiver */ -#define XEM_ECR_RECV_RESET_MASK 0x10000000UL -/* Enable receiver */ -#define XEM_ECR_RECV_ENABLE_MASK 0x08000000UL -/* Enable PHY */ -#define XEM_ECR_PHY_ENABLE_MASK 0x04000000UL -/* Enable xmit pad insert */ -#define XEM_ECR_XMIT_PAD_ENABLE_MASK 0x02000000UL -/* Enable xmit FCS insert */ -#define XEM_ECR_XMIT_FCS_ENABLE_MASK 0x01000000UL -/* Enable unicast addr */ -#define XEM_ECR_UNICAST_ENABLE_MASK 0x00020000UL -/* Enable broadcast addr */ -#define XEM_ECR_BROAD_ENABLE_MASK 0x00008000UL - -/* - * Transmit Status Register (TSR) - */ -/* Transmit excess deferral */ -#define XEM_TSR_EXCESS_DEFERRAL_MASK 0x80000000UL -/* Transmit late collision */ -#define XEM_TSR_LATE_COLLISION_MASK 0x01000000UL diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c deleted file mode 100644 index 5d8eaa5182..0000000000 --- a/drivers/net/xilinx_emaclite.c +++ /dev/null @@ -1,376 +0,0 @@ -/* - * (C) Copyright 2007 Michal Simek - * - * Michal SIMEK - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#ifdef XILINX_EMACLITE_BASEADDR - -#undef DEBUG - -#define ENET_MAX_MTU PKTSIZE -#define ENET_MAX_MTU_ALIGNED PKTSIZE_ALIGN -#define ENET_ADDR_LENGTH 6 - -/* EmacLite constants */ -#define XEL_BUFFER_OFFSET 0x0800 /* Next buffer's offset */ -#define XEL_TPLR_OFFSET 0x07F4 /* Tx packet length */ -#define XEL_TSR_OFFSET 0x07FC /* Tx status */ -#define XEL_RSR_OFFSET 0x17FC /* Rx status */ -#define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */ - -/* Xmit complete */ -#define XEL_TSR_XMIT_BUSY_MASK 0x00000001UL -/* Xmit interrupt enable bit */ -#define XEL_TSR_XMIT_IE_MASK 0x00000008UL -/* Buffer is active, SW bit only */ -#define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000UL -/* Program the MAC address */ -#define XEL_TSR_PROGRAM_MASK 0x00000002UL -/* define for programming the MAC address into the EMAC Lite */ -#define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK) - -/* Transmit packet length upper byte */ -#define XEL_TPLR_LENGTH_MASK_HI 0x0000FF00UL -/* Transmit packet length lower byte */ -#define XEL_TPLR_LENGTH_MASK_LO 0x000000FFUL - -/* Recv complete */ -#define XEL_RSR_RECV_DONE_MASK 0x00000001UL -/* Recv interrupt enable bit */ -#define XEL_RSR_RECV_IE_MASK 0x00000008UL - -typedef struct { - unsigned int baseaddress; /* Base address for device (IPIF) */ - unsigned int nexttxbuffertouse; /* Next TX buffer to write to */ - unsigned int nextrxbuffertouse; /* Next RX buffer to read from */ - unsigned char deviceid; /* Unique ID of device - for future */ -} xemaclite; - -static xemaclite emaclite; - -static char etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */ - -/* hardcoded MAC address for the Xilinx EMAC Core when env is nowhere*/ -#ifdef CFG_ENV_IS_NOWHERE -static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 }; -#endif - -void xemaclite_alignedread (u32 * srcptr, void *destptr, unsigned bytecount) -{ - unsigned int i; - u32 alignbuffer; - u32 *to32ptr; - u32 *from32ptr; - u8 *to8ptr; - u8 *from8ptr; - - from32ptr = (u32 *) srcptr; - - /* Word aligned buffer, no correction needed. */ - to32ptr = (u32 *) destptr; - while (bytecount > 3) { - *to32ptr++ = *from32ptr++; - bytecount -= 4; - } - to8ptr = (u8 *) to32ptr; - - alignbuffer = *from32ptr++; - from8ptr = (u8 *) & alignbuffer; - - for (i = 0; i < bytecount; i++) { - *to8ptr++ = *from8ptr++; - } -} - -void xemaclite_alignedwrite (void *srcptr, u32 destptr, unsigned bytecount) -{ - unsigned i; - u32 alignbuffer; - u32 *to32ptr = (u32 *) destptr; - u32 *from32ptr; - u8 *to8ptr; - u8 *from8ptr; - - from32ptr = (u32 *) srcptr; - while (bytecount > 3) { - - *to32ptr++ = *from32ptr++; - bytecount -= 4; - } - - alignbuffer = 0; - to8ptr = (u8 *) & alignbuffer; - from8ptr = (u8 *) from32ptr; - - for (i = 0; i < bytecount; i++) { - *to8ptr++ = *from8ptr++; - } - - *to32ptr++ = alignbuffer; -} - -void eth_halt (void) -{ -#ifdef DEBUG - puts ("eth_halt\n"); -#endif -} - -int eth_init (bd_t * bis) -{ -#ifdef DEBUG - puts ("EmacLite Initialization Started\n"); -#endif - memset (&emaclite, 0, sizeof (xemaclite)); - emaclite.baseaddress = XILINX_EMACLITE_BASEADDR; - - if (!getenv("ethaddr")) { - memcpy(bis->bi_enetaddr, emacaddr, ENET_ADDR_LENGTH); - } - -/* - * TX - TX_PING & TX_PONG initialization - */ - /* Restart PING TX */ - out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0); - /* Copy MAC address */ - xemaclite_alignedwrite (bis->bi_enetaddr, - emaclite.baseaddress, ENET_ADDR_LENGTH); - /* Set the length */ - out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH); - /* Update the MAC address in the EMAC Lite */ - out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, XEL_TSR_PROG_MAC_ADDR); - /* Wait for EMAC Lite to finish with the MAC address update */ - while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET) & - XEL_TSR_PROG_MAC_ADDR) != 0) ; - -#ifdef XILINX_EMACLITE_TX_PING_PONG - /* The same operation with PONG TX */ - out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0); - xemaclite_alignedwrite (bis->bi_enetaddr, emaclite.baseaddress + - XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH); - out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH); - out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, - XEL_TSR_PROG_MAC_ADDR); - while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + - XEL_BUFFER_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0) ; -#endif - -/* - * RX - RX_PING & RX_PONG initialization - */ - /* Write out the value to flush the RX buffer */ - out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK); -#ifdef XILINX_EMACLITE_RX_PING_PONG - out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET, - XEL_RSR_RECV_IE_MASK); -#endif - -#ifdef DEBUG - puts ("EmacLite Initialization complete\n"); -#endif - return 0; -} - -int xemaclite_txbufferavailable (xemaclite * instanceptr) -{ - u32 reg; - u32 txpingbusy; - u32 txpongbusy; - /* - * Read the other buffer register - * and determine if the other buffer is available - */ - reg = in_be32 (instanceptr->baseaddress + - instanceptr->nexttxbuffertouse + 0); - txpingbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) == - XEL_TSR_XMIT_BUSY_MASK); - - reg = in_be32 (instanceptr->baseaddress + - (instanceptr->nexttxbuffertouse ^ XEL_TSR_OFFSET) + 0); - txpongbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) == - XEL_TSR_XMIT_BUSY_MASK); - - return (!(txpingbusy && txpongbusy)); -} - -int eth_send (volatile void *ptr, int len) { - - unsigned int reg; - unsigned int baseaddress; - - unsigned maxtry = 1000; - - if (len > ENET_MAX_MTU) - len = ENET_MAX_MTU; - - while (!xemaclite_txbufferavailable (&emaclite) && maxtry) { - udelay (10); - maxtry--; - } - - if (!maxtry) { - printf ("Error: Timeout waiting for ethernet TX buffer\n"); - /* Restart PING TX */ - out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0); -#ifdef XILINX_EMACLITE_TX_PING_PONG - out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + - XEL_BUFFER_OFFSET, 0); -#endif - return 0; - } - - /* Determine the expected TX buffer address */ - baseaddress = (emaclite.baseaddress + emaclite.nexttxbuffertouse); - - /* Determine if the expected buffer address is empty */ - reg = in_be32 (baseaddress + XEL_TSR_OFFSET); - if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) - && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET) - & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) { - -#ifdef XILINX_EMACLITE_TX_PING_PONG - emaclite.nexttxbuffertouse ^= XEL_BUFFER_OFFSET; -#endif -#ifdef DEBUG - printf ("Send packet from 0x%x\n", baseaddress); -#endif - /* Write the frame to the buffer */ - xemaclite_alignedwrite ((void *) ptr, baseaddress, len); - out_be32 (baseaddress + XEL_TPLR_OFFSET,(len & - (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO))); - reg = in_be32 (baseaddress + XEL_TSR_OFFSET); - reg |= XEL_TSR_XMIT_BUSY_MASK; - if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) { - reg |= XEL_TSR_XMIT_ACTIVE_MASK; - } - out_be32 (baseaddress + XEL_TSR_OFFSET, reg); - return 1; - } -#ifdef XILINX_EMACLITE_TX_PING_PONG - /* Switch to second buffer */ - baseaddress ^= XEL_BUFFER_OFFSET; - /* Determine if the expected buffer address is empty */ - reg = in_be32 (baseaddress + XEL_TSR_OFFSET); - if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) - && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET) - & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) { -#ifdef DEBUG - printf ("Send packet from 0x%x\n", baseaddress); -#endif - /* Write the frame to the buffer */ - xemaclite_alignedwrite ((void *) ptr, baseaddress, len); - out_be32 (baseaddress + XEL_TPLR_OFFSET,(len & - (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO))); - reg = in_be32 (baseaddress + XEL_TSR_OFFSET); - reg |= XEL_TSR_XMIT_BUSY_MASK; - if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) { - reg |= XEL_TSR_XMIT_ACTIVE_MASK; - } - out_be32 (baseaddress + XEL_TSR_OFFSET, reg); - return 1; - } -#endif - puts ("Error while sending frame\n"); - return 0; -} - -int eth_rx (void) -{ - unsigned int length; - unsigned int reg; - unsigned int baseaddress; - - baseaddress = emaclite.baseaddress + emaclite.nextrxbuffertouse; - reg = in_be32 (baseaddress + XEL_RSR_OFFSET); -#ifdef DEBUG - printf ("Testing data at address 0x%x\n", baseaddress); -#endif - if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) { -#ifdef XILINX_EMACLITE_RX_PING_PONG - emaclite.nextrxbuffertouse ^= XEL_BUFFER_OFFSET; -#endif - } else { -#ifndef XILINX_EMACLITE_RX_PING_PONG -#ifdef DEBUG - printf ("No data was available - address 0x%x\n", baseaddress); -#endif - return 0; -#else - baseaddress ^= XEL_BUFFER_OFFSET; - reg = in_be32 (baseaddress + XEL_RSR_OFFSET); - if ((reg & XEL_RSR_RECV_DONE_MASK) != - XEL_RSR_RECV_DONE_MASK) { -#ifdef DEBUG - printf ("No data was available - address 0x%x\n", - baseaddress); -#endif - return 0; - } -#endif - } - /* Get the length of the frame that arrived */ - switch(((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC)) & - 0xFFFF0000 ) >> 16) { - case 0x806: - length = 42 + 20; /* FIXME size of ARP */ -#ifdef DEBUG - puts ("ARP Packet\n"); -#endif - break; - case 0x800: - length = 14 + 14 + - (((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0x10)) & - 0xFFFF0000) >> 16); /* FIXME size of IP packet */ -#ifdef DEBUG - puts("IP Packet\n"); -#endif - break; - default: -#ifdef DEBUG - puts("Other Packet\n"); -#endif - length = ENET_MAX_MTU; - break; - } - - xemaclite_alignedread ((u32 *) (baseaddress + XEL_RXBUFF_OFFSET), - etherrxbuff, length); - - /* Acknowledge the frame */ - reg = in_be32 (baseaddress + XEL_RSR_OFFSET); - reg &= ~XEL_RSR_RECV_DONE_MASK; - out_be32 (baseaddress + XEL_RSR_OFFSET, reg); - -#ifdef DEBUG - printf ("Packet receive from 0x%x, length %dB\n", baseaddress, length); -#endif - NetReceive ((uchar *) etherrxbuff, length); - return 1; - -} -#endif diff --git a/drivers/serial_xuartlite.c b/drivers/serial_xuartlite.c index 1f3aaae403..ed59abea86 100644 --- a/drivers/serial_xuartlite.c +++ b/drivers/serial_xuartlite.c @@ -24,7 +24,7 @@ #include -#ifdef XILINX_UARTLITE +#ifdef CONFIG_MICROBLAZE #include diff --git a/fs/Makefile b/fs/Makefile index 118ae78f2d..273d90e011 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -22,7 +22,7 @@ # # -SUBDIRS := romfs jffs2 cramfs fdos fat reiserfs ext2 +SUBDIRS := jffs2 cramfs fdos fat reiserfs ext2 $(obj).depend all: @for dir in $(SUBDIRS) ; do \ diff --git a/fs/romfs/Makefile b/fs/romfs/Makefile deleted file mode 100644 index 937d755940..0000000000 --- a/fs/romfs/Makefile +++ /dev/null @@ -1,49 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)libromfs.a - -AOBJS = -COBJS = romfs.o - -SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS)) - -#CPPFLAGS += - -all: $(LIB) $(AOBJS) - -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/fs/romfs/romfs.c b/fs/romfs/romfs.c deleted file mode 100644 index 15de3e18ff..0000000000 --- a/fs/romfs/romfs.c +++ /dev/null @@ -1,240 +0,0 @@ -/* - * (C) Copyright 2007 Michal Simek - * - * Michal SIMEK - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -#if defined(CONFIG_CMD_JFFS2) - -#include -#include -#include -#include - -#undef DEBUG_ROMFS - -/* ROMFS superblock */ -struct romfs_super { - u32 word0; - u32 word1; - u32 size; - u32 checksum; - char name[0]; -}; - -struct romfs_inode { - u32 next; - u32 spec; - u32 size; - u32 checksum; - char name[0]; -}; - -extern flash_info_t flash_info[]; -#define PART_OFFSET(x) (x->offset + flash_info[x->dev->id->num].start[0]) -#define ALIGN(x) (((x) & 0xfffffff0)) -#define HEADERSIZE(name) (0x20 + ALIGN(strlen(name))) - -static unsigned long romfs_resolve (unsigned long begin, unsigned long offset, - unsigned long size, int raw, char *filename) -{ - unsigned long inodeoffset = 0, nextoffset; - struct romfs_inode *inode; -#ifdef DEBUG_ROMFS - printf ("ROMFS_resolve: begin 0x%x, offset 0x%x, size 0x%x, raw 0x%x, \ - filename %s\n", begin, offset, size, raw, filename); -#endif - - while (inodeoffset < size) { - inode = (struct romfs_inode *)(begin + offset + inodeoffset); - offset = 0; - nextoffset = ALIGN (inode->next); -#ifdef DEBUG_ROMFS - printf("inode 0x%x, name %s - len 0x%x, next inode 0x%x, \ - compare names 0x%x\n", - inode, inode->name, strlen (inode->name), nextoffset, - strncmp (filename, inode->name, strlen (filename))); -#endif - if (!strncmp (filename, inode->name, strlen (inode->name))) { - char *p = strtok (NULL, "/"); - if (raw && (p == NULL || *p == '\0')) { - return offset + inodeoffset; - } - return romfs_resolve (begin, - inodeoffset + HEADERSIZE (inode->name), - size, raw, p); - } - inodeoffset = nextoffset; - } - - printf ("can't find corresponding entry\n"); - return 0; -} - -int romfs_load (char *loadoffset, struct part_info *info, char *filename) -{ - struct romfs_inode *inode; - struct romfs_super *sb; - char *data; - int pocet; - sb = (struct romfs_super *) PART_OFFSET (info); - - unsigned long offset; - - offset = romfs_resolve (PART_OFFSET (info), HEADERSIZE (sb->name), - sb->size, 1, strtok (filename, "/")); - if (offset <= 0) - return offset; - - inode = (struct romfs_inode *)(PART_OFFSET (info) + offset); - data = (char *)((int)inode + HEADERSIZE (inode->name)); - pocet = inode->size; - while (pocet--) { - *loadoffset++ = *data++; - } - return inode->size; -} - -static int romfs_list_inode (struct part_info *info, unsigned long offset) -{ - struct romfs_inode *inode = - (struct romfs_inode *)(PART_OFFSET (info) + offset); - struct romfs_inode *hardlink = NULL; - char str[3], *data; - -/* - * mapping spec.info means - * 0 hard link link destination [file header] - * 1 directory first file's header - * 2 regular file unused, must be zero [MBZ] - * 3 symbolic link unused, MBZ (file data is the link content) - * 4 block device 16/16 bits major/minor number - * 5 char device - " - - * 6 socket unused, MBZ - * 7 fifo unused, MBZ - */ - char attributes[] = "hdflbcsp"; - str[0] = attributes[inode->next & 0x7]; - str[1] = (inode->next & 0x8) ? 'x' : '-'; - str[2] = '\0'; - - if ((str[0] == 'b') || (str[0] == 'c')) { -#ifdef DEBUG_ROMFS - printf (" %s %3d,%3d %12s 0x%08x 0x%08x", str, - (inode->spec & 0xffff0000) >> 16, - inode->spec & 0x0000ffff, inode->name, inode, - inode->spec); -#else - printf (" %s %3d,%3d %12s", str, - (inode->spec & 0xffff0000) >> 16, - inode->spec & 0x0000ffff); -#endif - } else { -#ifdef DEBUG_ROMFS - printf (" %s %7d %12s 0x%08x 0x%08x", str, inode->size, - inode->name, inode, inode->spec); -#else - printf (" %s %7d %12s", str, inode->size, inode->name); -#endif - if (str[0] == 'l') { - data = (char *)((int)inode + HEADERSIZE (inode->name)); - puts (" -> "); - puts (data); - } - if (str[0] == 'h') { - hardlink = (struct romfs_inode *)(PART_OFFSET (info) + - inode->spec); - puts (" -> "); - puts (hardlink->name); - } - } - puts ("\n"); - return ALIGN (inode->next); -} - -int romfs_ls (struct part_info *info, char *filename) -{ - struct romfs_inode *inode; - unsigned long inodeoffset = 0, nextoffset; - unsigned long offset, size; - struct romfs_super *sb; - sb = (struct romfs_super *)PART_OFFSET (info); - - if (strlen (filename) == 0 || !strcmp (filename, "/")) { - offset = HEADERSIZE (sb->name); - size = sb->size; - } else { - offset = romfs_resolve (PART_OFFSET (info), - HEADERSIZE (sb->name), sb->size, 1, - strtok (filename, "/")); - - if (offset == 0) { - return offset; - } - inode = (struct romfs_inode *)(PART_OFFSET (info) + offset); - if ((inode->next & 0x7) != 1) { - return (romfs_list_inode (info, offset) > 0); - } - - size = sb->size; - offset = offset + HEADERSIZE (inode->name); - } - - inodeoffset = offset + inodeoffset; - while (inodeoffset < size) { - nextoffset = romfs_list_inode (info, inodeoffset); - if (nextoffset == 0) - break; - inodeoffset = nextoffset; - } - return 1; -} - -int romfs_info (struct part_info *info) -{ - struct romfs_super *sb; - sb = (struct romfs_super *)PART_OFFSET (info); - - printf ("name: \t\t%s, len %d B\n", sb->name, strlen (sb->name)); - printf ("size of SB:\t%d B\n", HEADERSIZE (sb->name)); - printf ("full size:\t%d B\n", sb->size); - printf ("checksum:\t0x%x\n", sb->checksum); - return 0; -} - -int romfs_check (struct part_info *info) -{ - struct romfs_super *sb; - if (info->dev->id->type != MTD_DEV_TYPE_NOR) - return 0; - - sb = (struct romfs_super *)PART_OFFSET (info); - if ((sb->word0 != 0x2D726F6D) || (sb->word1 != 0x3166732D)) { - return 0; - } - return 1; -} - -#endif diff --git a/include/configs/ml401.h b/include/configs/ml401.h index 74fe88867e..7eeae708a7 100644 --- a/include/configs/ml401.h +++ b/include/configs/ml401.h @@ -1,7 +1,7 @@ /* * (C) Copyright 2007 Czech Technical University. * - * Michal SIMEK + * Michal SIMEK * * See file CREDITS for list of people who contributed to this * project. @@ -32,7 +32,6 @@ #define CONFIG_ML401 1 /* ML401 Board */ /* uart */ -#define XILINX_UARTLITE #define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR #define CONFIG_BAUDRATE XILINX_UART_BAUDRATE #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } @@ -87,7 +86,7 @@ * 0x11FB_F000 CFG_MONITOR_BASE * MONITOR_CODE 256kB Env * 0x13FF_F000 CFG_GBL_DATA_OFFSET - * GLOBAL_DATA 4kB bd, gd + * GLOBAL_DATA 4kB bd, gd * 0x1400_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE */ @@ -100,7 +99,7 @@ /* global pointer */ #define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */ /* start of global data */ -#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) +#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* monitor code */ #define SIZE 0x40000 @@ -146,16 +145,6 @@ #define CFG_FLASH_PROTECTION /* hardware flash protection */ #endif /* !FLASH */ -/* system ace */ -#ifdef XILINX_SYSACE_BASEADDR - #define CONFIG_SYSTEMACE - /* #define DEBUG_SYSTEMACE */ - #define SYSTEMACE_CONFIG_FPGA - #define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR - #define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH - #define CONFIG_DOS_PARTITION -#endif - /* * BOOTP options */ @@ -164,21 +153,28 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME + /* * Command line configuration. */ #include #define CONFIG_CMD_ASKENV +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_BDI #define CONFIG_CMD_CACHE +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IMI #define CONFIG_CMD_IRQ +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC #define CONFIG_CMD_MFSL +#define CONFIG_CMD_NET #define CONFIG_CMD_PING - -#if defined(CONFIG_SYSTEMACE) - #define CONFIG_CMD_EXT2 - #define CONFIG_CMD_FAT -#endif +#define CONFIG_CMD_RUN #if defined(FLASH) #define CONFIG_CMD_ECHO @@ -190,8 +186,6 @@ #define CONFIG_CMD_ENV #define CONFIG_CMD_SAVES #endif -#else - #undef CONFIG_CMD_FLASH #endif #if defined(CONFIG_CMD_JFFS2) @@ -216,16 +210,24 @@ #define CONFIG_BOOTDELAY 30 #define CONFIG_BOOTARGS "root=romfs" #define CONFIG_HOSTNAME "ml401" -#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" +#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" #define CONFIG_IPADDR 192.168.0.3 -#define CONFIG_SERVERIP 192.168.0.5 -#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.0.5 +#define CONFIG_GATEWAYIP 192.168.0.1 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD /* architecture dependent code */ #define CFG_USR_EXCEP /* user exception */ #define CFG_HZ 1000 +/* system ace */ +#define CONFIG_SYSTEMACE +/* #define DEBUG_SYSTEMACE */ +#define SYSTEMACE_CONFIG_FPGA +#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR +#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH +#define CONFIG_DOS_PARTITION + #define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo" #define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\ diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h index 9a2eec1bb2..08ac9cbd58 100644 --- a/include/configs/suzaku.h +++ b/include/configs/suzaku.h @@ -48,7 +48,6 @@ #define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ #define CFG_MALLOC_BASE (CFG_MONITOR_BASE - (1024 * 1024)) -#define XILINX_UARTLITE #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 115200 } @@ -56,16 +55,21 @@ #define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000 #define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* * Command line configuration. */ #include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_ENV -#undef CONFIG_CMD_MEMORY -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_MISC #define CFG_UART1_BASE (0xFFFF2000) #define CONFIG_SERIAL_BASE CFG_UART1_BASE @@ -104,6 +108,4 @@ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -#define XILINX_CLOCK_FREQ 50000000 - #endif /* __CONFIG_H */ diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h index 006a132881..35001d7ada 100644 --- a/include/configs/xupv2p.h +++ b/include/configs/xupv2p.h @@ -31,34 +31,13 @@ #define CONFIG_XUPV2P 1 /* uart */ -#ifdef XILINX_UARTLITE_BASEADDR -#define XILINX_UARTLITE -#define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR -#define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE +#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR +#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } -#else -#ifdef XILINX_UART16550_BASEADDR -#define CFG_NS16550 -#define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE 4 -#define CONFIG_CONS_INDEX 1 -#define CFG_NS16550_COM1 XILINX_UART16550_BASEADDR -#define CFG_NS16550_CLK XILINX_UART16550_CLOCK_HZ - -#define CONFIG_BAUDRATE 115200 -#define CFG_BAUDRATE_TABLE { 9600, 115200 } -#endif -#endif /* ethernet */ -#ifdef XILINX_EMAC_BASEADDR -#define XILINX_EMAC 1 -#else -#ifdef XILINX_EMACLITE_BASEADDR -#define XILINX_EMACLITE 1 -#endif -#endif -#undef ET_DEBUG +#define CONFIG_EMAC 1 +#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES /* * setting reset address @@ -69,13 +48,11 @@ * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze * jump to CFG_RESET_ADDRESS where is the original U-BOOT code. */ -/* #define CFG_RESET_ADDRESS 0x36000000 */ +#define CFG_RESET_ADDRESS 0x36000000 /* gpio */ -#ifdef XILINX_GPIO_BASEADDR #define CFG_GPIO_0 1 #define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR -#endif /* interrupt controller */ #define CFG_INTC_0 1 @@ -142,6 +119,7 @@ #define CFG_ENV_SIZE 0x1000 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) + /* * BOOTP options */ @@ -150,24 +128,29 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME + /* * Command line configuration. */ #include -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE +#define CONFIG_CMD_MEMORY #define CONFIG_CMD_IRQ -#define CONFIG_CMD_MFSL +#define CONFIG_CMD_BDI +#define CONFIG_CMD_NET +#define CONFIG_CMD_IMI +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_RUN +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MISC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 #define CONFIG_CMD_PING -#ifdef XILINX_SYSACE_BASEADDR -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#endif /* Miscellaneous configurable options */ #define CFG_PROMPT "U-Boot-mONStR> " @@ -179,7 +162,7 @@ #define CONFIG_BOOTDELAY 30 #define CONFIG_BOOTARGS "root=romfs" -#define CONFIG_HOSTNAME "xupv2p" +#define CONFIG_HOSTNAME "ml401" #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" #define CONFIG_IPADDR 192.168.0.3 #define CONFIG_SERVERIP 192.168.0.5 @@ -195,13 +178,11 @@ "echo" /* system ace */ -#ifdef XILINX_SYSACE_BASEADDR #define CONFIG_SYSTEMACE /* #define DEBUG_SYSTEMACE */ #define SYSTEMACE_CONFIG_FPGA #define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR #define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH #define CONFIG_DOS_PARTITION -#endif #endif /* __CONFIG_H */ diff --git a/lib_microblaze/time.c b/lib_microblaze/time.c index 0fef834992..3fa1b11262 100644 --- a/lib_microblaze/time.c +++ b/lib_microblaze/time.c @@ -26,17 +26,9 @@ #include -#ifdef CFG_TIMER_0 void udelay (unsigned long usec) { int i; i = get_timer (0); while ((get_timer (0) - i) < (usec / 1000)) ; } -#else -void udelay (unsigned long usec) -{ - unsigned int i; - for (i = 0; i < (usec * XILINX_CLOCK_FREQ / 10000000); i++); -} -#endif -- cgit v1.2.1