From 7773fd196918826ebaab769e63a4775607f5256c Mon Sep 17 00:00:00 2001 From: Otavio Salvador Date: Mon, 16 Dec 2013 20:44:00 -0200 Subject: imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The macro allows easy setting in per-pin, as for example: ,---- | imx_iomux_v3_setup_pad(MX6_PAD_NANDF_D1__GPIO_2_1 | MUX_MODE_SION); `---- The IOMUX_CONFIG_SION allows for reading PAD value from PSR register. The following quote from the datasheet: ,---- | ... | 28.4.2.2 GPIO Write Mode | The programming sequence for driving output signals should be as follows: | 1. Configure IOMUX to select GPIO mode (Via IOMUXC), also enable SION if need | to read loopback pad value through PSR | 2. Configure GPIO direction register to output (GPIO_GDIR[GDIR] set to 1b). | 3. Write value to data register (GPIO_DR). | ... `---- This fixes the gpio_get_value to properly work when a GPIO is set for output and has no conflicts. Thanks for Benoît Thébaudeau , Fabio Estevam and Eric Bénard for helping to properly trace this down. Signed-off-by: Otavio Salvador Acked-by: Stefano Babic --- arch/arm/include/asm/imx-common/iomux-v3.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h index dc2b3ef47a..dec11a1330 100644 --- a/arch/arm/include/asm/imx-common/iomux-v3.h +++ b/arch/arm/include/asm/imx-common/iomux-v3.h @@ -63,6 +63,8 @@ typedef u64 iomux_v3_cfg_t; #define MUX_SEL_INPUT_SHIFT 59 #define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT) +#define MUX_MODE_SION ((iomux_v3_cfg_t)IOMUX_CONFIG_SION << \ + MUX_MODE_SHIFT) #define MUX_PAD_CTRL(x) ((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT) #define IOMUX_PAD(pad_ctrl_ofs, mux_ctrl_ofs, mux_mode, sel_input_ofs, \ -- cgit v1.2.1