From 60161943719c4054453f6932ad2bd5fe2285bf1b Mon Sep 17 00:00:00 2001 From: Laurence Withers Date: Mon, 26 Sep 2011 16:02:30 +0000 Subject: NAND: davinci: choose correct 1-bit h/w ECC reg In nand_davinci_readecc(), select the correct NANDFECC register based on CONFIG_SYS_NAND_CS rather than hardcoding the choice of NANDF1ECC. This allows 1-bit hardware ECC to work with chip select other than CS2. Note this now matches the usage in nand_davinci_enable_hwecc(), which already had the correct handling, and allows refactoring to a single function encapsulating the register read. Without this fix, writing NAND pages to a chip not wired to CS2 would result in in the ECC calculation always returning FFFFFF for each 512-byte segment, and reading back a correctly written page (one with ECC intact) would always fail. With this fix, the ECC is written and verified correctly. Signed-off-by: Laurence Withers Signed-off-by: Scott Wood --- drivers/mtd/nand/davinci_nand.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index d41579c9ce..e8506ddd9b 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -176,35 +176,35 @@ static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, #ifdef CONFIG_SYS_NAND_HW_ECC -static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode) +static u_int32_t nand_davinci_readecc(struct mtd_info *mtd) { - u_int32_t val; + u_int32_t ecc = 0; - (void)__raw_readl(&(davinci_emif_regs->nandfecc[ + ecc = __raw_readl(&(davinci_emif_regs->nandfecc[ CONFIG_SYS_NAND_CS - 2])); - val = __raw_readl(&davinci_emif_regs->nandfcr); - val |= DAVINCI_NANDFCR_NAND_ENABLE(CONFIG_SYS_NAND_CS); - val |= DAVINCI_NANDFCR_1BIT_ECC_START(CONFIG_SYS_NAND_CS); - __raw_writel(val, &davinci_emif_regs->nandfcr); + return ecc; } -static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region) +static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode) { - u_int32_t ecc = 0; + u_int32_t val; - ecc = __raw_readl(&(davinci_emif_regs->nandfecc[region - 1])); + /* reading the ECC result register resets the ECC calculation */ + nand_davinci_readecc(mtd); - return ecc; + val = __raw_readl(&davinci_emif_regs->nandfcr); + val |= DAVINCI_NANDFCR_NAND_ENABLE(CONFIG_SYS_NAND_CS); + val |= DAVINCI_NANDFCR_1BIT_ECC_START(CONFIG_SYS_NAND_CS); + __raw_writel(val, &davinci_emif_regs->nandfcr); } static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) { u_int32_t tmp; - const int region = 1; - tmp = nand_davinci_readecc(mtd, region); + tmp = nand_davinci_readecc(mtd); /* Squeeze 4 bytes ECC into 3 bytes by removing RESERVED bits * and shifting. RESERVED bits are 31 to 28 and 15 to 12. */ -- cgit v1.2.1