From 5fecb36ca0c5642259227bba9aed94727e084c17 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Sun, 19 Aug 2012 21:33:50 +0000 Subject: MX: Set a common gpio.h for all i.MX Each i.MX has its own gpio.h, defining the same structure. The internal GPIO controller has the same layout (at least for the register used by u-boot) and can be shared. Signed-off-by: Stefano Babic Tested-by: Matt Sealey --- arch/arm/include/asm/arch-mx25/gpio.h | 17 +----------- arch/arm/include/asm/arch-mx31/gpio.h | 7 +---- arch/arm/include/asm/arch-mx35/gpio.h | 12 +-------- arch/arm/include/asm/arch-mx5/gpio.h | 7 +---- arch/arm/include/asm/arch-mx6/gpio.h | 7 +---- arch/arm/include/asm/arch-mx6/imx-regs.h | 2 -- arch/arm/include/asm/imx-common/gpio.h | 39 +++++++++++++++++++++++++++ board/freescale/mx6qsabrelite/mx6qsabrelite.c | 28 +++++++++---------- board/karo/tx25/tx25.c | 10 +++---- board/syteco/zmx25/zmx25.c | 26 +++++++++--------- include/configs/mx6qsabrelite.h | 3 ++- 11 files changed, 78 insertions(+), 80 deletions(-) create mode 100644 arch/arm/include/asm/imx-common/gpio.h diff --git a/arch/arm/include/asm/arch-mx25/gpio.h b/arch/arm/include/asm/arch-mx25/gpio.h index dc6edc7c85..61c0b0d723 100644 --- a/arch/arm/include/asm/arch-mx25/gpio.h +++ b/arch/arm/include/asm/arch-mx25/gpio.h @@ -25,21 +25,6 @@ #ifndef __ASM_ARCH_MX25_GPIO_H #define __ASM_ARCH_MX25_GPIO_H -/* Converts a GPIO port number and the internal bit position - * to the GPIO number - */ -#define MXC_GPIO_PORT_TO_NUM(port, bit) (((port - 1) << 5) + (bit & 0x1f)) - -/* GPIO registers */ -struct gpio_regs { - u32 gpio_dr; /* data */ - u32 gpio_dir; /* direction */ - u32 psr; /* pad satus */ - u32 icr1; /* interrupt config 1 */ - u32 icr2; /* interrupt config 2 */ - u32 imr; /* interrupt mask */ - u32 isr; /* interrupt status */ - u32 edge_sel; /* edge select */ -}; +#include #endif diff --git a/arch/arm/include/asm/arch-mx31/gpio.h b/arch/arm/include/asm/arch-mx31/gpio.h index 95b73bfc34..55c0afa809 100644 --- a/arch/arm/include/asm/arch-mx31/gpio.h +++ b/arch/arm/include/asm/arch-mx31/gpio.h @@ -25,11 +25,6 @@ #ifndef __ASM_ARCH_MX31_GPIO_H #define __ASM_ARCH_MX31_GPIO_H -/* GPIO Registers */ -struct gpio_regs { - u32 gpio_dr; - u32 gpio_dir; - u32 gpio_psr; -}; +#include #endif diff --git a/arch/arm/include/asm/arch-mx35/gpio.h b/arch/arm/include/asm/arch-mx35/gpio.h index 7bcc3e8688..1deb2927a0 100644 --- a/arch/arm/include/asm/arch-mx35/gpio.h +++ b/arch/arm/include/asm/arch-mx35/gpio.h @@ -25,16 +25,6 @@ #ifndef __ASM_ARCH_MX35_GPIO_H #define __ASM_ARCH_MX35_GPIO_H -/* GPIO registers */ -struct gpio_regs { - u32 gpio_dr; /* data */ - u32 gpio_dir; /* direction */ - u32 psr; /* pad satus */ - u32 icr1; /* interrupt config 1 */ - u32 icr2; /* interrupt config 2 */ - u32 imr; /* interrupt mask */ - u32 isr; /* interrupt status */ - u32 edge_sel; /* edge select */ -}; +#include #endif diff --git a/arch/arm/include/asm/arch-mx5/gpio.h b/arch/arm/include/asm/arch-mx5/gpio.h index 1dc34e9164..b1b1218083 100644 --- a/arch/arm/include/asm/arch-mx5/gpio.h +++ b/arch/arm/include/asm/arch-mx5/gpio.h @@ -25,11 +25,6 @@ #ifndef __ASM_ARCH_MX5_GPIO_H #define __ASM_ARCH_MX5_GPIO_H -/* GPIO registers */ -struct gpio_regs { - u32 gpio_dr; - u32 gpio_dir; - u32 gpio_psr; -}; +#include #endif diff --git a/arch/arm/include/asm/arch-mx6/gpio.h b/arch/arm/include/asm/arch-mx6/gpio.h index 20c4e57484..24c10f8bce 100644 --- a/arch/arm/include/asm/arch-mx6/gpio.h +++ b/arch/arm/include/asm/arch-mx6/gpio.h @@ -25,11 +25,6 @@ #ifndef __ASM_ARCH_MX6_GPIO_H #define __ASM_ARCH_MX6_GPIO_H -/* GPIO registers */ -struct gpio_regs { - u32 gpio_dr; - u32 gpio_dir; - u32 gpio_psr; -}; +#include #endif /* __ASM_ARCH_MX6_GPIO_H */ diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index dacb9ea8cf..b89dfe55f2 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -172,8 +172,6 @@ #define IMX_IIM_BASE OCOTP_BASE_ADDR #define FEC_QUIRK_ENET_MAC -#define GPIO_NUMBER(port, index) ((((port)-1)*32)+((index)&31)) - #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) #include diff --git a/arch/arm/include/asm/imx-common/gpio.h b/arch/arm/include/asm/imx-common/gpio.h new file mode 100644 index 0000000000..65226d9b44 --- /dev/null +++ b/arch/arm/include/asm/imx-common/gpio.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2011 + * Stefano Babic, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#ifndef __ASM_ARCH_IMX_GPIO_H +#define __ASM_ARCH_IMX_GPIO_H + +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +/* GPIO registers */ +struct gpio_regs { + u32 gpio_dr; /* data */ + u32 gpio_dir; /* direction */ + u32 gpio_psr; /* pad satus */ +}; +#endif + +#define IMX_GPIO_NR(port, index) ((((port)-1)*32)+((index)&31)) + +#endif diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index cb855975be..db0de6376c 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -87,12 +87,12 @@ struct i2c_pads_info i2c_pad_info0 = { .scl = { .i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC, .gpio_mode = MX6Q_PAD_EIM_D21__GPIO_3_21 | PC, - .gp = GPIO_NUMBER(3, 21) + .gp = IMX_GPIO_NR(3, 21) }, .sda = { .i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC, .gpio_mode = MX6Q_PAD_EIM_D28__GPIO_3_28 | PC, - .gp = GPIO_NUMBER(3, 28) + .gp = IMX_GPIO_NR(3, 28) } }; @@ -101,12 +101,12 @@ struct i2c_pads_info i2c_pad_info1 = { .scl = { .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC, .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO_4_12 | PC, - .gp = GPIO_NUMBER(4, 12) + .gp = IMX_GPIO_NR(4, 12) }, .sda = { .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC, .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO_4_13 | PC, - .gp = GPIO_NUMBER(4, 13) + .gp = IMX_GPIO_NR(4, 13) } }; @@ -115,12 +115,12 @@ struct i2c_pads_info i2c_pad_info2 = { .scl = { .i2c_mode = MX6Q_PAD_GPIO_5__I2C3_SCL | PC, .gpio_mode = MX6Q_PAD_GPIO_5__GPIO_1_5 | PC, - .gp = GPIO_NUMBER(1, 5) + .gp = IMX_GPIO_NR(1, 5) }, .sda = { .i2c_mode = MX6Q_PAD_GPIO_16__I2C3_SDA | PC, .gpio_mode = MX6Q_PAD_GPIO_16__GPIO_7_11 | PC, - .gp = GPIO_NUMBER(7, 11) + .gp = IMX_GPIO_NR(7, 11) } }; @@ -229,9 +229,9 @@ int board_ehci_hcd_init(int port) imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads)); /* Reset USB hub */ - gpio_direction_output(GPIO_NUMBER(7, 12), 0); + gpio_direction_output(IMX_GPIO_NR(7, 12), 0); mdelay(2); - gpio_set_value(GPIO_NUMBER(7, 12), 1); + gpio_set_value(IMX_GPIO_NR(7, 12), 1); return 0; } @@ -413,12 +413,12 @@ struct button_key { }; static struct button_key const buttons[] = { - {"back", GPIO_NUMBER(2, 2), 'B'}, - {"home", GPIO_NUMBER(2, 4), 'H'}, - {"menu", GPIO_NUMBER(2, 1), 'M'}, - {"search", GPIO_NUMBER(2, 3), 'S'}, - {"volup", GPIO_NUMBER(7, 13), 'V'}, - {"voldown", GPIO_NUMBER(4, 5), 'v'}, + {"back", IMX_GPIO_NR(2, 2), 'B'}, + {"home", IMX_GPIO_NR(2, 4), 'H'}, + {"menu", IMX_GPIO_NR(2, 1), 'M'}, + {"search", IMX_GPIO_NR(2, 3), 'S'}, + {"volup", IMX_GPIO_NR(7, 13), 'V'}, + {"voldown", IMX_GPIO_NR(4, 5), 'v'}, }; /* diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c index 07fd98d604..0fd41c7732 100644 --- a/board/karo/tx25/tx25.c +++ b/board/karo/tx25/tx25.c @@ -34,8 +34,8 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_FEC_MXC -#define GPIO_FEC_RESET_B MXC_GPIO_PORT_TO_NUM(4, 7) -#define GPIO_FEC_ENABLE_B MXC_GPIO_PORT_TO_NUM(4, 9) +#define GPIO_FEC_RESET_B IMX_GPIO_NR(4, 7) +#define GPIO_FEC_ENABLE_B IMX_GPIO_NR(4, 9) void tx25_fec_init(void) { struct iomuxc_mux_ctl *muxctl; @@ -103,9 +103,9 @@ void tx25_fec_init(void) /* * set each to 1 and make each an output */ - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 10), 1); - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 11), 1); - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 12), 1); + gpio_direction_output(IMX_GPIO_NR(3, 10), 1); + gpio_direction_output(IMX_GPIO_NR(3, 11), 1); + gpio_direction_output(IMX_GPIO_NR(3, 12), 1); mdelay(22); /* this value came from RedBoot */ diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c index c56b195ae1..fe5589d931 100644 --- a/board/syteco/zmx25/zmx25.c +++ b/board/syteco/zmx25/zmx25.c @@ -56,7 +56,7 @@ int board_init() /* Setup of core volatage selection pin to run at 1.4V */ writel(gpio_mux_mode5, &muxctl->pad_ext_armclk); /* VCORE GPIO3[15] */ - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 15), 1); + gpio_direction_output(IMX_GPIO_NR(3, 15), 1); /* Setup of input daisy chains for SD card pins*/ writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_cmd); @@ -68,10 +68,10 @@ int board_init() /* Setup of digital output for USB power and OC */ writel(gpio_mux_mode5, &muxctl->pad_csi_d3); /* USB Power GPIO1[28] */ - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 28), 1); + gpio_direction_output(IMX_GPIO_NR(1, 28), 1); writel(gpio_mux_mode5, &muxctl->pad_csi_d2); /* USB OC GPIO1[27] */ - gpio_direction_input(MXC_GPIO_PORT_TO_NUM(1, 18)); + gpio_direction_input(IMX_GPIO_NR(1, 18)); /* Setup of digital output control pins */ writel(gpio_mux_mode5, &muxctl->pad_csi_d8); /* Ouput 1 Ctrl GPIO1[7] */ @@ -83,21 +83,21 @@ int board_init() writel(0, &padctl->pad_csi_d5); /* Ouput 2 Stat pull up off */ /* Switch both output drivers off */ - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 7), 0); - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 6), 0); + gpio_direction_output(IMX_GPIO_NR(1, 7), 0); + gpio_direction_output(IMX_GPIO_NR(1, 6), 0); /* Setup of key input pin GPIO2[29]*/ writel(gpio_mux_mode5 | MX25_PIN_MUX_SION, &muxctl->pad_kpp_row0); writel(0, &padctl->pad_kpp_row0); /* Key pull up off */ - gpio_direction_input(MXC_GPIO_PORT_TO_NUM(2, 29)); + gpio_direction_input(IMX_GPIO_NR(2, 29)); /* Setup of status LED outputs */ writel(gpio_mux_mode5, &muxctl->pad_csi_d9); /* GPIO4[21] */ writel(gpio_mux_mode5, &muxctl->pad_csi_d4); /* GPIO1[29] */ /* Switch both LEDs off */ - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(4, 21), 0); - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 29), 0); + gpio_direction_output(IMX_GPIO_NR(4, 21), 0); + gpio_direction_output(IMX_GPIO_NR(1, 29), 0); /* Setup of CAN1 and CAN2 signals */ writel(gpio_mux_mode6, &muxctl->pad_gpio_a); /* CAN1 TX */ @@ -148,12 +148,12 @@ int board_late_init(void) writel(gpio_mux_mode2, &muxctl->pad_uart2_cts); /* assert PHY reset (low) */ - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 16), 0); + gpio_direction_output(IMX_GPIO_NR(3, 16), 0); udelay(5000); /* deassert PHY reset */ - gpio_set_value(MXC_GPIO_PORT_TO_NUM(3, 16), 1); + gpio_set_value(IMX_GPIO_NR(3, 16), 1); udelay(5000); #endif @@ -161,12 +161,12 @@ int board_late_init(void) e = getenv("gs_base_board"); if (e != NULL) { if (strcmp(e, "G283") == 0) { - int key = gpio_get_value(MXC_GPIO_PORT_TO_NUM(2, 29)); + int key = gpio_get_value(IMX_GPIO_NR(2, 29)); if (key) { /* Switch on both LEDs to inidcate boot mode */ - gpio_set_value(MXC_GPIO_PORT_TO_NUM(1, 29), 0); - gpio_set_value(MXC_GPIO_PORT_TO_NUM(4, 21), 0); + gpio_set_value(IMX_GPIO_NR(1, 29), 0); + gpio_set_value(IMX_GPIO_NR(4, 21), 0); setenv("preboot", "run gs_slow_boot"); } else diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index 8cd9a631c1..72d0154d24 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -31,6 +31,7 @@ #define CONFIG_MACH_TYPE 3769 #include +#include #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS @@ -53,7 +54,7 @@ #define CONFIG_SPI_FLASH_SST #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0|(GPIO_NUMBER(3, 19)<<8)) +#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8)) #define CONFIG_SF_DEFAULT_SPEED 25000000 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) #endif -- cgit v1.2.1