From 59ca5537be1f17abd6d36dffb5a522b89f36163a Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 20 Oct 2014 20:45:22 +0900 Subject: ARM: UniPhier: make pinmon command optional Add CONFIG_CMD_PINMON to UniPhier-specific Kconfig and make the "pinmon" command user-configurable. This command can be disabled via the configuration if users do not need it. Signed-off-by: Masahiro Yamada --- arch/arm/cpu/armv7/uniphier/Kconfig | 9 +++++++++ arch/arm/cpu/armv7/uniphier/Makefile | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig index 34f5496c8c..8906f64c45 100644 --- a/arch/arm/cpu/armv7/uniphier/Kconfig +++ b/arch/arm/cpu/armv7/uniphier/Kconfig @@ -29,4 +29,13 @@ config MACH_PH1_SLD8 endchoice +config CMD_PINMON + bool "Enable boot mode pins monitor command" + depends on !SPL_BUILD + default y + help + The command "pinmon" shows the state of the boot mode pins. + The boot mode pins are latched when the system reset is deasserted + and determine which device the system should load a boot image from. + endmenu diff --git a/arch/arm/cpu/armv7/uniphier/Makefile b/arch/arm/cpu/armv7/uniphier/Makefile index 7cedddaadc..dd57469d9c 100644 --- a/arch/arm/cpu/armv7/uniphier/Makefile +++ b/arch/arm/cpu/armv7/uniphier/Makefile @@ -12,7 +12,7 @@ obj-y += dram_init.o obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o obj-$(CONFIG_UNIPHIER_SMP) += smp.o -obj-$(if $(CONFIG_SPL_BUILD),,y) += cmd_pinmon.o +obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o obj-y += board_common.o obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o -- cgit v1.2.1