From 4f7cb08ee7b48a511a9cd2398fd4a243ca2733c7 Mon Sep 17 00:00:00 2001 From: wdenk Date: Thu, 11 Sep 2003 23:06:34 +0000 Subject: * Patch by Martin Krause, 11 Sep 2003: add burn-in tests for TRAB board * Enable instruction cache on MPC5200 board --- CHANGELOG | 5 + Makefile | 2 + board/trab/Makefile | 2 +- board/trab/Pt1000_temp_data.h | 71 ++++ board/trab/cmd_trab.c | 821 ++++++++++++++++++++++++++++++++++++++++++ board/trab/memory.c | 484 +++++++++++++++++++++++++ board/trab/tsc2000.c | 317 ++++++++++++++++ board/trab/tsc2000.h | 147 ++++++++ common/cmd_vfd.c | 6 +- common/exports.c | 6 +- examples/Makefile | 5 + include/_exports.h | 4 + include/configs/IceCube.h | 4 +- include/configs/trab.h | 5 + include/exports.h | 6 +- 15 files changed, 1878 insertions(+), 7 deletions(-) create mode 100644 board/trab/Pt1000_temp_data.h create mode 100644 board/trab/cmd_trab.c create mode 100644 board/trab/memory.c create mode 100644 board/trab/tsc2000.c create mode 100644 board/trab/tsc2000.h diff --git a/CHANGELOG b/CHANGELOG index 29c5a2fb44..a98201d1ad 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,11 @@ Changes for U-Boot 1.0.0: ====================================================================== +* Patch by Martin Krause, 11 Sep 2003: + add burn-in tests for TRAB board + +* Enable instruction cache on MPC5200 board + * Patch by Denis Peter, 11 Sep 2003: - fix USB data pointer assignment for bulk only transfer. - prevent to display erased directories in FAT filesystem. diff --git a/Makefile b/Makefile index f634880054..6285d9ea3e 100644 --- a/Makefile +++ b/Makefile @@ -117,6 +117,8 @@ LIBS += drivers/sk98lin/libsk98lin.a LIBS += post/libpost.a post/cpu/libcpu.a LIBS += common/libcommon.a LIBS += lib_generic/libgeneric.a +# Add GCC lib +PLATFORM_LIBS += -L $(shell dirname `$(CC) -print-libgcc-file-name`) -lgcc ######################################################################### ######################################################################### diff --git a/board/trab/Makefile b/board/trab/Makefile index d58ac915d0..08a1dbc178 100644 --- a/board/trab/Makefile +++ b/board/trab/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a -OBJS := trab.o flash.o vfd.o +OBJS := trab.o flash.o vfd.o cmd_trab.o memory.o tsc2000.o SOBJS := memsetup.o $(LIB): $(OBJS) $(SOBJS) diff --git a/board/trab/Pt1000_temp_data.h b/board/trab/Pt1000_temp_data.h new file mode 100644 index 0000000000..17e9ed7ae8 --- /dev/null +++ b/board/trab/Pt1000_temp_data.h @@ -0,0 +1,71 @@ +/* + * Data file for tsc2000 driver. + * Copyright (C) 2002, 2003 DENX Software Engineering, Wolfgang Denk, wd@denx.de + */ + +#ifndef _PT1000_TEMP_DATA_H +#define _PT1000_TEMP_DATA_H + +long Pt1000_temp_table[][2] = { + /* For quick range checking the largest element + * is placed at index 0. + * U, nV T, C*100 + */ + { 44000000 , 12165 }, + { -10000000 , -2644 }, + { -9000000 , -2381 }, + { -8000000 , -2118 }, + { -7000000 , -1855 }, + { -6000000 , -1591 }, + { -5000000 , -1327 }, + { -4000000 , -1063 }, + { -3000000 , -798 }, + { -2000000 , -532 }, + { -1000000 , -266 }, + { 0 , 000 }, + { 1000000 , 267 }, + { 2000000 , 534 }, + { 3000000 , 802 }, + { 4000000 , 1070 }, + { 5000000 , 1338 }, + { 6000000 , 1607 }, + { 7000000 , 1876 }, + { 8000000 , 2146 }, + { 9000000 , 2416 }, + { 10000000 , 2687 }, + { 11000000 , 2958 }, + { 12000000 , 3230 }, + { 13000000 , 3502 }, + { 14000000 , 3774 }, + { 15000000 , 4047 }, + { 16000000 , 4321 }, + { 17000000 , 4595 }, + { 18000000 , 4869 }, + { 19000000 , 5144 }, + { 20000000 , 5419 }, + { 21000000 , 5694 }, + { 22000000 , 5971 }, + { 23000000 , 6247 }, + { 24000000 , 6524 }, + { 25000000 , 6802 }, + { 26000000 , 7080 }, + { 27000000 , 7358 }, + { 28000000 , 7637 }, + { 29000000 , 7916 }, + { 30000000 , 8196 }, + { 31000000 , 8476 }, + { 32000000 , 8757 }, + { 33000000 , 9039 }, + { 34000000 , 9320 }, + { 35000000 , 9602 }, + { 36000000 , 9885 }, + { 37000000 , 10168 }, + { 38000000 , 10452 }, + { 39000000 , 10736 }, + { 40000000 , 11021 }, + { 41000000 , 11306 }, + { 42000000 , 11592 }, + { 43000000 , 11879 }, + { 44000000 , 12165 }, +}; +#endif /* _PT1000_TEMP_DATA_H */ diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c new file mode 100644 index 0000000000..0a9768ad48 --- /dev/null +++ b/board/trab/cmd_trab.c @@ -0,0 +1,821 @@ +/* + * (C) Copyright 2003 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* + * TRAB board specific commands. Especially commands for burn-in and function + * test. + */ +#if (CONFIG_COMMANDS & CFG_CMD_BSP) + +/* limits for valid range of VCC5V in mV */ +#define VCC5V_MIN 4500 +#define VCC5V_MAX 5500 + +/* + * Test strings for EEPROM test. Length of string 2 must not exceed length of + * string 1. Otherwise a buffer overrun could occur! + */ +#define EEPROM_TEST_STRING_1 "0987654321 :tset a si siht" +#define EEPROM_TEST_STRING_2 "this is a test: 1234567890" + +/* + * min/max limits for valid contact temperature during burn in test (in + * degree Centigrade * 100) + */ +#define MIN_CONTACT_TEMP -1000 +#define MAX_CONTACT_TEMP +9000 + +/* blinking frequency of status LED */ +#define LED_BLINK_FREQ 5 + +/* delay time between burn in cycles in seconds */ +#ifndef BURN_IN_CYCLE_DELAY /* if not defined in include/configs/trab.h */ +#define BURN_IN_CYCLE_DELAY 5 +#endif + +/* physical SRAM parameters */ +#define SRAM_ADDR 0x02000000 /* GCS1 */ +#define SRAM_SIZE 0x40000 /* 256 kByte */ + +/* CPLD-Register for controlling TRAB hardware functions */ +#define CPLD_BUTTONS ((volatile unsigned long *)0x04020000) +#define CPLD_FILL_LEVEL ((volatile unsigned long *)0x04008000) +#define CPLD_ROTARY_SWITCH ((volatile unsigned long *)0x04018000) +#define CPLD_RS485_RE ((volatile unsigned long *)0x04028000) + +/* I2C EEPROM device address */ +#define I2C_EEPROM_DEV_ADDR 0x54 + +/* EEPROM address map */ +#define EE_ADDR_TEST 128 +#define EE_ADDR_MAX_CYCLES 256 +#define EE_ADDR_STATUS 258 +#define EE_ADDR_PASS_CYCLES 259 +#define EE_ADDR_FIRST_ERROR_CYCLE 261 +#define EE_ADDR_FIRST_ERROR_NUM 263 +#define EE_ADDR_FIRST_ERROR_NAME 264 +#define EE_ADDR_ACT_CYCLE 280 + +/* Bit definitions for ADCCON */ +#define ADC_ENABLE_START 0x1 +#define ADC_READ_START 0x2 +#define ADC_STDBM 0x4 +#define ADC_INP_AIN0 (0x0 << 3) +#define ADC_INP_AIN1 (0x1 << 3) +#define ADC_INP_AIN2 (0x2 << 3) +#define ADC_INP_AIN3 (0x3 << 3) +#define ADC_INP_AIN4 (0x4 << 3) +#define ADC_INP_AIN5 (0x5 << 3) +#define ADC_INP_AIN6 (0x6 << 3) +#define ADC_INP_AIN7 (0x7 << 3) +#define ADC_PRSCEN 0x4000 +#define ADC_ECFLG 0x800 + +/* misc */ + +/* externals */ +extern int memory_post_tests (unsigned long start, unsigned long size); +extern int i2c_write (uchar, uint, int , uchar* , int); +extern int i2c_read (uchar, uint, int , uchar* , int); +extern void tsc2000_reg_init (void); +extern s32 tsc2000_contact_temp (void); +extern void spi_init(void); + +/* function declarations */ +int do_dip (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +int do_vcc5v (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +int do_burn_in (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +int do_contact_temp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +int do_burn_in_status (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +/* helper functions */ +static void adc_init (void); +static int adc_read (unsigned int channel); +static int read_dip (void); +static int read_vcc5v (void); +static int test_dip (void); +static int test_vcc5v (void); +static int test_rotary_switch (void); +static int test_sram (void); +static int test_eeprom (void); +static int test_contact_temp (void); +static int i2c_write_multiple (uchar chip, uint addr, int alen, + uchar *buffer, int len); +static int i2c_read_multiple (uchar chip, uint addr, int alen, + uchar *buffer, int len); +static void led_set (unsigned int); +static void led_blink (void); +static void led_init (void); +static void sdelay (unsigned long seconds); /* delay in seconds */ +static int dummy (void); +static int read_max_cycles(void); +static void test_function_table_init (void); +static void global_vars_init (void); +static int global_vars_write_to_eeprom (void); + +/* globals */ +u16 max_cycles; +u8 status; +u16 pass_cycles; +u16 first_error_cycle; +u8 first_error_num; +unsigned char first_error_name[16]; +u16 act_cycle; + +typedef struct test_function_s { + unsigned char *name; + int (*pf)(void); +} test_function_t; + +/* max number of Burn In Functions */ +#define BIF_MAX 6 + +/* table with burn in functions */ +test_function_t test_function[BIF_MAX]; + + +int do_burn_in (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int i; + int cycle_status; + + if (argc > 1) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + led_init (); + global_vars_init (); + test_function_table_init (); + + if (global_vars_write_to_eeprom () != 0) { + printf ("%s: error writing global_vars to eeprom\n", + __FUNCTION__); + return (1); + } + + if (read_max_cycles () != 0) { + printf ("%s: error reading max_cycles from eeprom\n", + __FUNCTION__); + return (1); + } + + if (max_cycles == 0) { + printf ("%s: error, burn in max_cycles = 0\n", __FUNCTION__); + return (1); + } + + status = 0; + for (act_cycle = 1; act_cycle <= max_cycles; act_cycle++) { + + cycle_status = 0; + for (i = 0; i < BIF_MAX; i++) { + + /* call test function */ + if ((*test_function[i].pf)() != 0) { + printf ("error in %s test\n", + test_function[i].name); + + /* is it the first error? */ + if (status == 0) { + status = 1; + first_error_cycle = act_cycle; + + /* do not use error_num 0 */ + first_error_num = i+1; + strncpy (first_error_name, + test_function[i].name, + sizeof (first_error_name)); + led_set (0); + } + cycle_status = 1; + } + } + /* were all tests of actual cycle OK? */ + if (cycle_status == 0) + pass_cycles++; + + /* set status LED if no error is occoured since yet */ + if (status == 0) + led_set (1); + + printf ("%s: cycle %d finished\n", __FUNCTION__, act_cycle); + + /* pause between cycles */ + sdelay (BURN_IN_CYCLE_DELAY); + } + + if (global_vars_write_to_eeprom () != 0) { + led_set (0); + printf ("%s: error writing global_vars to eeprom\n", + __FUNCTION__); + status = 1; + } + + if (status == 0) { + led_blink (); /* endless loop!! */ + return (0); + } else { + led_set (0); + return (1); + } +} + +U_BOOT_CMD( + burn_in, 1, 1, do_burn_in, + "burn_in - start burn-in test application on TRAB\n", + "\n" + " - start burn-in test application\n" + " The burn-in test could took a while to finish!\n" + " The content of the onboard EEPROM is modified!\n" +); + + +int do_dip (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int i, dip; + + if (argc > 1) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if ((dip = read_dip ()) == -1) { + return 1; + } + + for (i = 0; i < 4; i++) { + if ((dip & (1 << i)) == 0) + printf("0"); + else + printf("1"); + } + printf("\n"); + + return 0; +} + +U_BOOT_CMD( + dip, 1, 1, do_dip, + "dip - read dip switch on TRAB\n", + "\n" + " - read state of dip switch (S1) on TRAB board\n" + " read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\"\n" +); + + +int do_vcc5v (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int vcc5v; + + if (argc > 1) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if ((vcc5v = read_vcc5v ()) == -1) { + return (1); + } + + printf ("%d", (vcc5v / 1000)); + printf (".%d", (vcc5v % 1000) / 100); + printf ("%d V\n", (vcc5v % 100) / 10) ; + + return 0; +} + +U_BOOT_CMD( + vcc5v, 1, 1, do_vcc5v, + "vcc5v - read VCC5V on TRAB\n", + "\n" + " - read actual value of voltage VCC5V\n" +); + + +int do_contact_temp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int contact_temp; + + if (argc > 1) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + spi_init (); + tsc2000_reg_init (); + + contact_temp = tsc2000_contact_temp(); + printf ("%d degree C * 100\n", contact_temp) ; + + return 0; +} + +U_BOOT_CMD( + c_temp, 1, 1, do_contact_temp, + "c_temp - read contact temperature on TRAB\n", + "\n" + " - reads the onboard temperature (=contact temperature)\n" +); + + +int do_burn_in_status (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + if (argc > 1) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_STATUS, 1, + (unsigned char*) &status, 1)) { + return (1); + } + if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_PASS_CYCLES, 1, + (unsigned char*) &pass_cycles, 2)) { + return (1); + } + if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_FIRST_ERROR_CYCLE, + 1, (unsigned char*) &first_error_cycle, 2)) { + return (1); + } + if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_FIRST_ERROR_NUM, + 1, (unsigned char*) &first_error_num, 1)) { + return (1); + } + if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_FIRST_ERROR_NAME, + 1, first_error_name, + sizeof (first_error_name))) { + return (1); + } + + if (read_max_cycles () != 0) { + return (1); + } + + printf ("max_cycles = %d\n", max_cycles); + printf ("status = %d\n", status); + printf ("pass_cycles = %d\n", pass_cycles); + printf ("first_error_cycle = %d\n", first_error_cycle); + printf ("first_error_num = %d\n", first_error_num); + printf ("first_error_name = %.*s\n",(int) sizeof(first_error_name), + first_error_name); + + return 0; +} + +U_BOOT_CMD( + bis, 1, 1, do_burn_in_status, + "bis - print burn in status on TRAB\n", + "\n" + " - prints the status variables of the last burn in test\n" + " stored in the onboard EEPROM on TRAB board\n" +); + +static int read_dip (void) +{ + unsigned int result = 0; + int adc_val; + int i; + + /*********************************************************** + DIP switch connection (according to wa4-cpu.sp.301.pdf, page 3): + SW1 - AIN4 + SW2 - AIN5 + SW3 - AIN6 + SW4 - AIN7 + + "On" DIP switch position short-circuits the voltage from + the input channel (i.e. '0' conversion result means "on"). + *************************************************************/ + + for (i = 7; i > 3; i--) { + + if ((adc_val = adc_read (i)) == -1) { + printf ("%s: Channel %d could not be read\n", + __FUNCTION__, i); + return (-1); + } + + /* + * Input voltage (switch open) is 1.8 V. + * (Vin_High/VRef)*adc_res = (1,8V/2,5V)*1023) = 736 + * Set trigger at halve that value. + */ + if (adc_val < 368) + result |= (1 << (i-4)); + } + return (result); +} + + +static int read_vcc5v (void) +{ + s32 result; + + /* VCC5V is connected to channel 2 */ + + if ((result = adc_read (2)) == -1) { + printf ("%s: VCC5V could not be read\n", __FUNCTION__); + return (-1); + } + /* + * Calculate voltage value. Split in two parts because there is no + * floating point support. VCC5V is connected over an resistor divider: + * VCC5V=ADCval*2,5V/1023*(10K+30K)/10K. + */ + result = result * 10 * 1000 / 1023; /* result in mV */ + + return (result); +} + + +static int test_dip (void) +{ + static int first_run = 1; + static int first_dip; + + if (first_run) { + if ((first_dip = read_dip ()) == -1) { + return (1); + } + first_run = 0; + debug ("%s: first_dip=%d\n", __FUNCTION__, first_dip); + } + if (first_dip != read_dip ()) { + return (1); + } else { + return (0); + } +} + + +static int test_vcc5v (void) +{ + int vcc5v; + + if ((vcc5v = read_vcc5v ()) == -1) { + return (1); + } + + if ((vcc5v > VCC5V_MAX) || (vcc5v < VCC5V_MIN)) { + return (1); + } else { + return (0); + } +} + + +static int test_rotary_switch (void) +{ + static int first_run = 1; + static int first_rs; + + if (first_run) { + /* + * clear bits in CPLD, because they have random values after + * power-up or reset. + */ + *CPLD_ROTARY_SWITCH |= (1 << 16) | (1 << 17); + + first_rs = ((*CPLD_ROTARY_SWITCH >> 16) & 0x7); + first_run = 0; + debug ("%s: first_rs=%d\n", __FUNCTION__, first_rs); + } + + if (first_rs != ((*CPLD_ROTARY_SWITCH >> 16) & 0x7)) { + return (1); + } else { + return (0); + } +} + + +static int test_sram (void) +{ + return (memory_post_tests (SRAM_ADDR, SRAM_SIZE)); +} + + +static int test_eeprom (void) +{ + unsigned char temp[sizeof (EEPROM_TEST_STRING_1)]; + int result = 0; + + /* write test string 1, read back and verify */ + if (i2c_write_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_TEST, 1, + EEPROM_TEST_STRING_1, + sizeof (EEPROM_TEST_STRING_1))) { + return (1); + } + + if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_TEST, 1, + temp, sizeof (EEPROM_TEST_STRING_1))) { + return (1); + } + + if (strcmp (temp, EEPROM_TEST_STRING_1) != 0) { + result = 1; + printf ("%s: error; read_str = \"%s\"\n", __FUNCTION__, temp); + } + + /* write test string 2, read back and verify */ + if (result == 0) { + if (i2c_write_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_TEST, 1, + EEPROM_TEST_STRING_2, + sizeof (EEPROM_TEST_STRING_2))) { + return (1); + } + + if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_TEST, 1, + temp, sizeof (EEPROM_TEST_STRING_2))) { + return (1); + } + + if (strcmp (temp, EEPROM_TEST_STRING_2) != 0) { + result = 1; + printf ("%s: error; read str = \"%s\"\n", + __FUNCTION__, temp); + } + } + return (result); +} + + +static int test_contact_temp (void) +{ + int contact_temp; + + spi_init (); + contact_temp = tsc2000_contact_temp (); + + if ((contact_temp < MIN_CONTACT_TEMP) + || (contact_temp > MAX_CONTACT_TEMP)) + return (1); + else + return (0); +} + + +static int i2c_write_multiple (uchar chip, uint addr, int alen, + uchar *buffer, int len) +{ + int i; + + if (alen != 1) { + printf ("%s: addr len other than 1 not supported\n", + __FUNCTION__); + return (1); + } + + for (i = 0; i < len; i++) { + if (i2c_write (chip, addr+i, alen, buffer+i, 1)) { + printf ("%s: could not write to i2c device %d" + ", addr %d\n", __FUNCTION__, chip, addr); + return (1); + } +#if 0 + printf ("chip=%#x, addr+i=%#x+%d=%p, alen=%d, *buffer+i=" + "%#x+%d=%p=\"%.1s\"\n", chip, addr, i, addr+i, + alen, buffer, i, buffer+i, buffer+i); +#endif + + udelay (30000); + } + return (0); +} + + +static int i2c_read_multiple (uchar chip, uint addr, int alen, + uchar *buffer, int len) +{ + int i; + + if (alen != 1) { + printf ("%s: addr len other than 1 not supported\n", + __FUNCTION__); + return (1); + } + + for (i = 0; i < len; i++) { + if (i2c_read (chip, addr+i, alen, buffer+i, 1)) { + printf ("%s: could not read from i2c device %#x" + ", addr %d\n", __FUNCTION__, chip, addr); + return (1); + } + } + return (0); +} + + +static int adc_read (unsigned int channel) +{ + int j = 1000; /* timeout value for wait loop in us */ + S3C2400_ADC *padc; + + padc = S3C2400_GetBase_ADC(); + channel &= 0x7; + + adc_init (); + + debug ("%s: adccon %#x\n", __FUNCTION__, padc->ADCCON); + + padc->ADCCON &= ~ADC_STDBM; /* select normal mode */ + padc->ADCCON &= ~(0x7 << 3); /* clear the channel bits */ + padc->ADCCON |= ((channel << 3) | ADC_ENABLE_START); + + debug ("%s: reading ch %d, addcon %#x\n", __FUNCTION__, + (padc->ADCCON >> 3) & 0x7, padc->ADCCON); + + while (j--) { + if ((padc->ADCCON & ADC_ENABLE_START) == 0) + break; + udelay (1); + } + + if (j == 0) { + printf("%s: ADC timeout\n", __FUNCTION__); + padc->ADCCON |= ADC_STDBM; /* select standby mode */ + return -1; + } + + padc->ADCCON |= ADC_STDBM; /* select standby mode */ + + debug ("%s: return %#x, adccon %#x\n", __FUNCTION__, + padc->ADCDAT & 0x3FF, padc->ADCCON); + + return (padc->ADCDAT & 0x3FF); +} + + +static void adc_init (void) +{ + S3C2400_ADC *padc; + + padc = S3C2400_GetBase_ADC(); + + padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */ + padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */ + + return; +} + + +static void led_set (unsigned int state) +{ + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + + led_init (); + + switch (state) { + case 0: /* turn LED off */ + gpio->PADAT |= (1 << 12); + break; + case 1: /* turn LED on */ + gpio->PADAT &= ~(1 << 12); + break; + default: + } +} + +static void led_blink (void) +{ + led_init (); + + /* blink LED. This function does not return! */ + while (1) { + led_set (1); + udelay (1000000 / LED_BLINK_FREQ / 2); + led_set (0); + udelay (1000000 / LED_BLINK_FREQ / 2); + } +} + + +static void led_init (void) +{ + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + + /* configure GPA12 as output and set to High -> LED off */ + gpio->PACON &= ~(1 << 12); + gpio->PADAT |= (1 << 12); +} + + +static void sdelay (unsigned long seconds) +{ + unsigned long i; + + for (i = 0; i < seconds; i++) { + udelay (1000000); + } +} + + +static int global_vars_write_to_eeprom (void) +{ + if (i2c_write_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_STATUS, 1, + (unsigned char*) &status, 1)) { + return (1); + } + if (i2c_write_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_PASS_CYCLES, 1, + (unsigned char*) &pass_cycles, 2)) { + return (1); + } + if (i2c_write_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_FIRST_ERROR_CYCLE, + 1, (unsigned char*) &first_error_cycle, 2)) { + return (1); + } + if (i2c_write_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_FIRST_ERROR_NUM, + 1, (unsigned char*) &first_error_num, 1)) { + return (1); + } + if (i2c_write_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_FIRST_ERROR_NAME, + 1, first_error_name, + sizeof(first_error_name))) { + return (1); + } + return (0); +} + +static void global_vars_init (void) +{ + status = 1; /* error */ + pass_cycles = 0; + first_error_cycle = 0; + first_error_num = 0; + first_error_name[0] = '\0'; + act_cycle = 0; + max_cycles = 0; +} + + +static void test_function_table_init (void) +{ + int i; + + for (i = 0; i < BIF_MAX; i++) + test_function[i].pf = dummy; + + /* + * the length of "name" must not exceed 16, including the '\0' + * termination. See also the EEPROM address map. + */ + test_function[0].pf = test_dip; + test_function[0].name = "dip"; + + test_function[1].pf = test_vcc5v; + test_function[1].name = "vcc5v"; + + test_function[2].pf = test_rotary_switch; + test_function[2].name = "rotary_switch"; + + test_function[3].pf = test_sram; + test_function[3].name = "sram"; + + test_function[4].pf = test_eeprom; + test_function[4].name = "eeprom"; + + test_function[5].pf = test_contact_temp; + test_function[5].name = "contact_temp"; +} + + +static int read_max_cycles (void) +{ + if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_MAX_CYCLES, 1, + (unsigned char *) &max_cycles, 2) != 0) { + return (1); + } + + return (0); +} + +static int dummy(void) +{ + return (0); +} + +#endif /* CFG_CMD_BSP */ diff --git a/board/trab/memory.c b/board/trab/memory.c new file mode 100644 index 0000000000..5c7beb9892 --- /dev/null +++ b/board/trab/memory.c @@ -0,0 +1,484 @@ +/* + * (C) Copyright 2002-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +/* Memory test + * + * General observations: + * o The recommended test sequence is to test the data lines: if they are + * broken, nothing else will work properly. Then test the address + * lines. Finally, test the cells in the memory now that the test + * program knows that the address and data lines work properly. + * This sequence also helps isolate and identify what is faulty. + * + * o For the address line test, it is a good idea to use the base + * address of the lowest memory location, which causes a '1' bit to + * walk through a field of zeros on the address lines and the highest + * memory location, which causes a '0' bit to walk through a field of + * '1's on the address line. + * + * o Floating buses can fool memory tests if the test routine writes + * a value and then reads it back immediately. The problem is, the + * write will charge the residual capacitance on the data bus so the + * bus retains its state briefely. When the test program reads the + * value back immediately, the capacitance of the bus can allow it + * to read back what was written, even though the memory circuitry + * is broken. To avoid this, the test program should write a test + * pattern to the target location, write a different pattern elsewhere + * to charge the residual capacitance in a differnt manner, then read + * the target location back. + * + * o Always read the target location EXACTLY ONCE and save it in a local + * variable. The problem with reading the target location more than + * once is that the second and subsequent reads may work properly, + * resulting in a failed test that tells the poor technician that + * "Memory error at 00000000, wrote aaaaaaaa, read aaaaaaaa" which + * doesn't help him one bit and causes puzzled phone calls. Been there, + * done that. + * + * Data line test: + * --------------- + * This tests data lines for shorts and opens by forcing adjacent data + * to opposite states. Because the data lines could be routed in an + * arbitrary manner the must ensure test patterns ensure that every case + * is tested. By using the following series of binary patterns every + * combination of adjacent bits is test regardless of routing. + * + * ...101010101010101010101010 + * ...110011001100110011001100 + * ...111100001111000011110000 + * ...111111110000000011111111 + * + * Carrying this out, gives us six hex patterns as follows: + * + * 0xaaaaaaaaaaaaaaaa + * 0xcccccccccccccccc + * 0xf0f0f0f0f0f0f0f0 + * 0xff00ff00ff00ff00 + * 0xffff0000ffff0000 + * 0xffffffff00000000 + * + * To test for short and opens to other signals on our boards, we + * simply test with the 1's complemnt of the paterns as well, resulting + * in twelve patterns total. + * + * After writing a test pattern. a special pattern 0x0123456789ABCDEF is + * written to a different address in case the data lines are floating. + * Thus, if a byte lane fails, you will see part of the special + * pattern in that byte lane when the test runs. For example, if the + * xx__xxxxxxxxxxxx byte line fails, you will see aa23aaaaaaaaaaaa + * (for the 'a' test pattern). + * + * Address line test: + * ------------------ + * This function performs a test to verify that all the address lines + * hooked up to the RAM work properly. If there is an address line + * fault, it usually shows up as two different locations in the address + * map (related by the faulty address line) mapping to one physical + * memory storage location. The artifact that shows up is writing to + * the first location "changes" the second location. + * + * To test all address lines, we start with the given base address and + * xor the address with a '1' bit to flip one address line. For each + * test, we shift the '1' bit left to test the next address line. + * + * In the actual code, we start with address sizeof(ulong) since our + * test pattern we use is a ulong and thus, if we tried to test lower + * order address bits, it wouldn't work because our pattern would + * overwrite itself. + * + * Example for a 4 bit address space with the base at 0000: + * 0000 <- base + * 0001 <- test 1 + * 0010 <- test 2 + * 0100 <- test 3 + * 1000 <- test 4 + * Example for a 4 bit address space with the base at 0010: + * 0010 <- base + * 0011 <- test 1 + * 0000 <- (below the base address, skipped) + * 0110 <- test 2 + * 1010 <- test 3 + * + * The test locations are successively tested to make sure that they are + * not "mirrored" onto the base address due to a faulty address line. + * Note that the base and each test location are related by one address + * line flipped. Note that the base address need not be all zeros. + * + * Memory tests 1-4: + * ----------------- + * These tests verify RAM using sequential writes and reads + * to/from RAM. There are several test cases that use different patterns to + * verify RAM. Each test case fills a region of RAM with one pattern and + * then reads the region back and compares its contents with the pattern. + * The following patterns are used: + * + * 1a) zero pattern (0x00000000) + * 1b) negative pattern (0xffffffff) + * 1c) checkerboard pattern (0x55555555) + * 1d) checkerboard pattern (0xaaaaaaaa) + * 2) bit-flip pattern ((1 << (offset % 32)) + * 3) address pattern (offset) + * 4) address pattern (~offset) + * + * Being run in normal mode, the test verifies only small 4Kb + * regions of RAM around each 1Mb boundary. For example, for 64Mb + * RAM the following areas are verified: 0x00000000-0x00000800, + * 0x000ff800-0x00100800, 0x001ff800-0x00200800, ..., 0x03fff800- + * 0x04000000. If the test is run in slow-test mode, it verifies + * the whole RAM. + */ + +/* #ifdef CONFIG_POST */ + +#include +#include + +/* #if CONFIG_POST & CFG_POST_MEMORY */ + +/* + * Define INJECT_*_ERRORS for testing error detection in the presence of + * _good_ hardware. + */ +#undef INJECT_DATA_ERRORS +#undef INJECT_ADDRESS_ERRORS + +#ifdef INJECT_DATA_ERRORS +#warning "Injecting data line errors for testing purposes" +#endif + +#ifdef INJECT_ADDRESS_ERRORS +#warning "Injecting address line errors for testing purposes" +#endif + + +/* + * This function performs a double word move from the data at + * the source pointer to the location at the destination pointer. + * This is helpful for testing memory on processors which have a 64 bit + * wide data bus. + * + * On those PowerPC with FPU, use assembly and a floating point move: + * this does a 64 bit move. + * + * For other processors, let the compiler generate the best code it can. + */ +static void move64(unsigned long long *src, unsigned long long *dest) +{ +#if defined(CONFIG_MPC8260) || defined(CONFIG_MPC824X) + asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */ + "stfd 0, 0(4)" /* *dest = fpr0 */ + : : : "fr0" ); /* Clobbers fr0 */ + return; +#else + *dest = *src; +#endif +} + +/* + * This is 64 bit wide test patterns. Note that they reside in ROM + * (which presumably works) and the tests write them to RAM which may + * not work. + * + * The "otherpattern" is written to drive the data bus to values other + * than the test pattern. This is for detecting floating bus lines. + * + */ +const static unsigned long long pattern[] = { + 0xaaaaaaaaaaaaaaaa, + 0xcccccccccccccccc, + 0xf0f0f0f0f0f0f0f0, + 0xff00ff00ff00ff00, + 0xffff0000ffff0000, + 0xffffffff00000000, + 0x00000000ffffffff, + 0x0000ffff0000ffff, + 0x00ff00ff00ff00ff, + 0x0f0f0f0f0f0f0f0f, + 0x3333333333333333, + 0x5555555555555555}; +const unsigned long long otherpattern = 0x0123456789abcdef; + + +static int memory_post_dataline(unsigned long long * pmem) +{ + unsigned long long temp64; + int num_patterns = sizeof(pattern)/ sizeof(pattern[0]); + int i; + unsigned int hi, lo, pathi, patlo; + int ret = 0; + + for ( i = 0; i < num_patterns; i++) { + move64((unsigned long long *)&(pattern[i]), pmem++); + /* + * Put a different pattern on the data lines: otherwise they + * may float long enough to read back what we wrote. + */ + move64((unsigned long long *)&otherpattern, pmem--); + move64(pmem, &temp64); + +#ifdef INJECT_DATA_ERRORS + temp64 ^= 0x00008000; +#endif + + if (temp64 != pattern[i]){ + pathi = (pattern[i]>>32) & 0xffffffff; + patlo = pattern[i] & 0xffffffff; + + hi = (temp64>>32) & 0xffffffff; + lo = temp64 & 0xffffffff; + + printf ("Memory (date line) error at %08lx, " + "wrote %08x%08x, read %08x%08x !\n", + (ulong)pmem, pathi, patlo, hi, lo); + ret = -1; + } + } + return ret; +} + +static int memory_post_addrline(ulong *testaddr, ulong *base, ulong size) +{ + ulong *target; + ulong *end; + ulong readback; + ulong xor; + int ret = 0; + + end = (ulong *)((ulong)base + size); /* pointer arith! */ + xor = 0; + for(xor = sizeof(ulong); xor > 0; xor <<= 1) { + target = (ulong *)((ulong)testaddr ^ xor); + if((target >= base) && (target < end)) { + *testaddr = ~*target; + readback = *target; + +#ifdef INJECT_ADDRESS_ERRORS + if(xor == 0x00008000) { + readback = *testaddr; + } +#endif + if(readback == *testaddr) { + printf ("Memory (address line) error at %08lx<->%08lx, " + "XOR value %08lx !\n", + (ulong)testaddr, (ulong)target, + xor); + ret = -1; + } + } + } + return ret; +} + +static int memory_post_test1 (unsigned long start, + unsigned long size, + unsigned long val) +{ + unsigned long i; + ulong *mem = (ulong *) start; + ulong readback; + int ret = 0; + + for (i = 0; i < size / sizeof (ulong); i++) { + mem[i] = val; + if (i % 1024 == 0) + WATCHDOG_RESET (); + } + + for (i = 0; i < size / sizeof (ulong) && ret == 0; i++) { + readback = mem[i]; + if (readback != val) { + printf ("Memory error at %08lx, " + "wrote %08lx, read %08lx !\n", + (ulong)(mem + i), val, readback); + + ret = -1; + break; + } + if (i % 1024 == 0) + WATCHDOG_RESET (); + } + + return ret; +} + +static int memory_post_test2 (unsigned long start, unsigned long size) +{ + unsigned long i; + ulong *mem = (ulong *) start; + ulong readback; + int ret = 0; + + for (i = 0; i < size / sizeof (ulong); i++) { + mem[i] = 1 << (i % 32); + if (i % 1024 == 0) + WATCHDOG_RESET (); + } + + for (i = 0; i < size / sizeof (ulong) && ret == 0; i++) { + readback = mem[i]; + if (readback != (1 << (i % 32))) { + printf ("Memory error at %08lx, " + "wrote %08x, read %08lx !\n", + (ulong)(mem + i), 1 << (i % 32), readback); + + ret = -1; + break; + } + if (i % 1024 == 0) + WATCHDOG_RESET (); + } + + return ret; +} + +static int memory_post_test3 (unsigned long start, unsigned long size) +{ + unsigned long i; + ulong *mem = (ulong *) start; + ulong readback; + int ret = 0; + + for (i = 0; i < size / sizeof (ulong); i++) { + mem[i] = i; + if (i % 1024 == 0) + WATCHDOG_RESET (); + } + + for (i = 0; i < size / sizeof (ulong) && ret == 0; i++) { + readback = mem[i]; + if (readback != i) { + printf ("Memory error at %08lx, " + "wrote %08lx, read %08lx !\n", + (ulong)(mem + i), i, readback); + + ret = -1; + break; + } + if (i % 1024 == 0) + WATCHDOG_RESET (); + } + + return ret; +} + +static int memory_post_test4 (unsigned long start, unsigned long size) +{ + unsigned long i; + ulong *mem = (ulong *) start; + ulong readback; + int ret = 0; + + for (i = 0; i < size / sizeof (ulong); i++) { + mem[i] = ~i; + if (i % 1024 == 0) + WATCHDOG_RESET (); + } + + for (i = 0; i < size / sizeof (ulong) && ret == 0; i++) { + readback = mem[i]; + if (readback != ~i) { + printf ("Memory error at %08lx, " + "wrote %08lx, read %08lx !\n", + (ulong)(mem + i), ~i, readback); + + ret = -1; + break; + } + if (i % 1024 == 0) + WATCHDOG_RESET (); + } + + return ret; +} + +int memory_post_tests (unsigned long start, unsigned long size) +{ + int ret = 0; + + if (ret == 0) + ret = memory_post_dataline ((long long *)start); + WATCHDOG_RESET (); + if (ret == 0) + ret = memory_post_addrline ((long *)start, (long *)start, size); + WATCHDOG_RESET (); + if (ret == 0) + ret = memory_post_addrline ((long *)(start + size - 8), + (long *)start, size); + WATCHDOG_RESET (); + if (ret == 0) + ret = memory_post_test1 (start, size, 0x00000000); + WATCHDOG_RESET (); + if (ret == 0) + ret = memory_post_test1 (start, size, 0xffffffff); + WATCHDOG_RESET (); + if (ret == 0) + ret = memory_post_test1 (start, size, 0x55555555); + WATCHDOG_RESET (); + if (ret == 0) + ret = memory_post_test1 (start, size, 0xaaaaaaaa); + WATCHDOG_RESET (); + if (ret == 0) + ret = memory_post_test2 (start, size); + WATCHDOG_RESET (); + if (ret == 0) + ret = memory_post_test3 (start, size); + WATCHDOG_RESET (); + if (ret == 0) + ret = memory_post_test4 (start, size); + WATCHDOG_RESET (); + + return ret; +} + +#if 0 +int memory_post_test (int flags) +{ + int ret = 0; + DECLARE_GLOBAL_DATA_PTR; + bd_t *bd = gd->bd; + unsigned long memsize = (bd->bi_memsize >= 256 << 20 ? + 256 << 20 : bd->bi_memsize) - (1 << 20); + + + if (flags & POST_SLOWTEST) { + ret = memory_post_tests (CFG_SDRAM_BASE, memsize); + } else { /* POST_NORMAL */ + + unsigned long i; + + for (i = 0; i < (memsize >> 20) && ret == 0; i++) { + if (ret == 0) + ret = memory_post_tests (i << 20, 0x800); + if (ret == 0) + ret = memory_post_tests ((i << 20) + 0xff800, 0x800); + } + } + + return ret; +} +#endif 0 + +/* #endif */ /* CONFIG_POST & CFG_POST_MEMORY */ +/* #endif */ /* CONFIG_POST */ diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c new file mode 100644 index 0000000000..4d960854c2 --- /dev/null +++ b/board/trab/tsc2000.c @@ -0,0 +1,317 @@ +/* + * Functions to access the TSC2000 controller on TRAB board (used for scanning + * thermo sensors) + * + * Copyright (C) 2003 Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * Copyright (C) 2002 DENX Software Engineering, Wolfgang Denk, wd@denx.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include "tsc2000.h" + +void spi_init(void) +{ + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI(); + int i; + + /* Configure I/O ports. */ + gpio->PDCON = (gpio->PDCON & 0xF3FFFF) | 0x040000; + gpio->PGCON = (gpio->PGCON & 0x0F3FFF) | 0x008000; + gpio->PGCON = (gpio->PGCON & 0x0CFFFF) | 0x020000; + gpio->PGCON = (gpio->PGCON & 0x03FFFF) | 0x080000; + + CLR_CS_TOUCH(); + + spi->ch[0].SPPRE = 0x1F; /* Baud-rate ca. 514kHz */ + spi->ch[0].SPPIN = 0x01; /* SPI-MOSI holds Level after last bit */ + spi->ch[0].SPCON = 0x1A; /* Polling, Prescaler, Master, CPOL=0, + CPHA=1 */ + + /* Dummy byte ensures clock to be low. */ + for (i = 0; i < 10; i++) { + spi->ch[0].SPTDAT = 0xFF; + } + spi_wait_transmit_done(); +} + + +static void spi_wait_transmit_done(void) +{ + S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI(); + + while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */ +} + + +static void tsc2000_write(unsigned short reg, unsigned short data) +{ + S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI(); + unsigned int command; + + SET_CS_TOUCH(); + command = reg; + spi->ch[0].SPTDAT = (command & 0xFF00) >> 8; + spi_wait_transmit_done(); + spi->ch[0].SPTDAT = (command & 0x00FF); + spi_wait_transmit_done(); + spi->ch[0].SPTDAT = (data & 0xFF00) >> 8; + spi_wait_transmit_done(); + spi->ch[0].SPTDAT = (data & 0x00FF); + spi_wait_transmit_done(); + + CLR_CS_TOUCH(); +} + + +static unsigned short tsc2000_read (unsigned short reg) +{ + unsigned short command, data; + S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI(); + + SET_CS_TOUCH(); + command = 0x8000 | reg; + + spi->ch[0].SPTDAT = (command & 0xFF00) >> 8; + spi_wait_transmit_done(); + spi->ch[0].SPTDAT = (command & 0x00FF); + spi_wait_transmit_done(); + + spi->ch[0].SPTDAT = 0xFF; + spi_wait_transmit_done(); + data = spi->ch[0].SPRDAT; + spi->ch[0].SPTDAT = 0xFF; + spi_wait_transmit_done(); + + CLR_CS_TOUCH(); + return (spi->ch[0].SPRDAT & 0x0FF) | (data << 8); +} + + +static void tsc2000_set_mux (unsigned int channel) +{ + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + + CLR_MUX1_ENABLE; CLR_MUX2_ENABLE; + CLR_MUX3_ENABLE; CLR_MUX4_ENABLE; + switch (channel) { + case 0: + CLR_MUX0; CLR_MUX1; + SET_MUX1_ENABLE; + break; + case 1: + SET_MUX0; CLR_MUX1; + SET_MUX1_ENABLE; + break; + case 2: + CLR_MUX0; SET_MUX1; + SET_MUX1_ENABLE; + break; + case 3: + SET_MUX0; SET_MUX1; + SET_MUX1_ENABLE; + break; + case 4: + CLR_MUX0; CLR_MUX1; + SET_MUX2_ENABLE; + break; + case 5: + SET_MUX0; CLR_MUX1; + SET_MUX2_ENABLE; + break; + case 6: + CLR_MUX0; SET_MUX1; + SET_MUX2_ENABLE; + break; + case 7: + SET_MUX0; SET_MUX1; + SET_MUX2_ENABLE; + break; + case 8: + CLR_MUX0; CLR_MUX1; + SET_MUX3_ENABLE; + break; + case 9: + SET_MUX0; CLR_MUX1; + SET_MUX3_ENABLE; + break; + case 10: + CLR_MUX0; SET_MUX1; + SET_MUX3_ENABLE; + break; + case 11: + SET_MUX0; SET_MUX1; + SET_MUX3_ENABLE; + break; + case 12: + CLR_MUX0; CLR_MUX1; + SET_MUX4_ENABLE; + break; + case 13: + SET_MUX0; CLR_MUX1; + SET_MUX4_ENABLE; + break; + case 14: + CLR_MUX0; SET_MUX1; + SET_MUX4_ENABLE; + break; + case 15: + SET_MUX0; SET_MUX1; + SET_MUX4_ENABLE; + break; + default: + CLR_MUX0; CLR_MUX1; + } +} + + +static void tsc2000_set_range (unsigned int range) +{ + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + + switch (range) { + case 1: + CLR_SEL_TEMP_V_0; SET_SEL_TEMP_V_1; + CLR_SEL_TEMP_V_2; CLR_SEL_TEMP_V_3; + break; + case 2: + CLR_SEL_TEMP_V_0; CLR_SEL_TEMP_V_1; + CLR_SEL_TEMP_V_2; SET_SEL_TEMP_V_3; + break; + case 3: + SET_SEL_TEMP_V_0; CLR_SEL_TEMP_V_1; + SET_SEL_TEMP_V_2; CLR_SEL_TEMP_V_3; + break; + } +} + + +static u16 tsc2000_read_channel (unsigned int channel) +{ + u16 res; + + tsc2000_set_mux(channel); + udelay(3 * TSC2000_DELAY_BASE); + + tsc2000_write(TSC2000_REG_ADC, 0x2036); + adc_wait_conversion_done (); + res = tsc2000_read(TSC2000_REG_AUX1); + return res; +} + + +s32 tsc2000_contact_temp (void) +{ + long adc_pt1000, offset; + long u_pt1000; + long contact_temp; + + + tsc2000_reg_init (); + tsc2000_set_range (3); + + adc_pt1000 = tsc2000_read_channel (14); + debug ("read channel 14 (pt1000 adc value): %ld\n", adc_pt1000); + + offset = tsc2000_read_channel (15); + debug ("read channel 15 (offset): %ld\n", offset); + + /* + * Formula for calculating voltage drop on PT1000 resistor: u_pt1000 = + * x_range3 * (adc_raw - offset) / 10. Formula to calculate x_range3: + * x_range3 = (2500 * (1000000 + err_vref + err_amp3)) / (4095*6). The + * error correction Values err_vref and err_amp3 are assumed as 0 in + * u-boot, because this could cause only a very small error (< 1%). + */ + u_pt1000 = (101750 * (adc_pt1000 - offset)) / 10; + debug ("u_pt1000: %ld\n", u_pt1000); + + if (tsc2000_interpolate(u_pt1000, Pt1000_temp_table, + &contact_temp) == -1) { + printf ("%s: error interpolating PT1000 vlaue\n", + __FUNCTION__); + return (-1000); + } + debug ("contact_temp: %ld\n", contact_temp); + + return contact_temp; +} + + +void tsc2000_reg_init (void) +{ + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + + tsc2000_write(TSC2000_REG_ADC, 0x2036); + tsc2000_write(TSC2000_REG_REF, 0x0011); + tsc2000_write(TSC2000_REG_DACCTL, 0x0000); + + CON_MUX0; + CON_MUX1; + + CON_MUX1_ENABLE; + CON_MUX2_ENABLE; + CON_MUX3_ENABLE; + CON_MUX4_ENABLE; + + CON_SEL_TEMP_V_0; + CON_SEL_TEMP_V_1; + CON_SEL_TEMP_V_2; + CON_SEL_TEMP_V_3; + + tsc2000_set_mux(0); + tsc2000_set_range(0); +} + + +static int tsc2000_interpolate(long value, long data[][2], long *result) +{ + int i; + + /* the data is sorted and the first element is upper + * limit so we can easily check for out-of-band values + */ + if (data[0][0] < value || data[1][0] > value) + return -1; + + i = 1; + while (data[i][0] < value) + i++; + + /* To prevent overflow we have to store the intermediate + result in 'long long'. + */ + + *result = data[i-1][1] + + ((unsigned long long)(data[i][1] - data[i-1][1]) + * (unsigned long long)(value - data[i-1][0])) + / (data[i][0] - data[i-1][0]); + + return 0; +} + + +static void adc_wait_conversion_done(void) +{ + while (!(tsc2000_read(TSC2000_REG_ADC) & (1 << 14))); +} diff --git a/board/trab/tsc2000.h b/board/trab/tsc2000.h new file mode 100644 index 0000000000..4f118692cb --- /dev/null +++ b/board/trab/tsc2000.h @@ -0,0 +1,147 @@ +/* + * Functions to access the TSC2000 controller on TRAB board (used for scanning + * thermo sensors) + * + * Copyright (C) 2003 Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * Copyright (C) 2002 DENX Software Engineering, Wolfgang Denk, wd@denx.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _TSC2000_H_ +#define _TSC2000_H_ + +#include "Pt1000_temp_data.h" + +/* temperature channel multiplexer definitions */ +#define CON_MUX0 (gpio->PCCON = (gpio->PCCON & 0x0FFFFFCFF) | 0x00000100) +#define CLR_MUX0 (gpio->PCDAT &= 0x0FFEF) +#define SET_MUX0 (gpio->PCDAT |= 0x00010) + +#define CON_MUX1 (gpio->PCCON = (gpio->PCCON & 0x0FFFFF3FF) | 0x00000400) +#define CLR_MUX1 (gpio->PCDAT &= 0x0FFDF) +#define SET_MUX1 (gpio->PCDAT |= 0x00020) + +#define CON_MUX1_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFFCFFF) | 0x00001000) +#define CLR_MUX1_ENABLE (gpio->PCDAT |= 0x00040) +#define SET_MUX1_ENABLE (gpio->PCDAT &= 0x0FFBF) + +#define CON_MUX2_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFF3FFF) | 0x00004000) +#define CLR_MUX2_ENABLE (gpio->PCDAT |= 0x00080) +#define SET_MUX2_ENABLE (gpio->PCDAT &= 0x0FF7F) + +#define CON_MUX3_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFCFFFF) | 0x00010000) +#define CLR_MUX3_ENABLE (gpio->PCDAT |= 0x00100) +#define SET_MUX3_ENABLE (gpio->PCDAT &= 0x0FEFF) + +#define CON_MUX4_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFF3FFFF) | 0x00040000) +#define CLR_MUX4_ENABLE (gpio->PCDAT |= 0x00200) +#define SET_MUX4_ENABLE (gpio->PCDAT &= 0x0FDFF) + +#define CON_SEL_TEMP_V_0 (gpio->PCCON = (gpio->PCCON & 0x0FFCFFFFF) | 0x00100000) +#define CLR_SEL_TEMP_V_0 (gpio->PCDAT &= 0x0FBFF) +#define SET_SEL_TEMP_V_0 (gpio->PCDAT |= 0x00400) + +#define CON_SEL_TEMP_V_1 (gpio->PCCON = (gpio->PCCON & 0x0FF3FFFFF) | 0x00400000) +#define CLR_SEL_TEMP_V_1 (gpio->PCDAT &= 0x0F7FF) +#define SET_SEL_TEMP_V_1 (gpio->PCDAT |= 0x00800) + +#define CON_SEL_TEMP_V_2 (gpio->PCCON = (gpio->PCCON & 0x0FCFFFFFF) | 0x01000000) +#define CLR_SEL_TEMP_V_2 (gpio->PCDAT &= 0x0EFFF) +#define SET_SEL_TEMP_V_2 (gpio->PCDAT |= 0x01000) + +#define CON_SEL_TEMP_V_3 (gpio->PCCON = (gpio->PCCON & 0x0F3FFFFFF) | 0x04000000) +#define CLR_SEL_TEMP_V_3 (gpio->PCDAT &= 0x0DFFF) +#define SET_SEL_TEMP_V_3 (gpio->PCDAT |= 0x02000) + +/* TSC2000 register definition */ +#define TSC2000_REG_X ((0 << 11) | (0 << 5)) +#define TSC2000_REG_Y ((0 << 11) | (1 << 5)) +#define TSC2000_REG_Z1 ((0 << 11) | (2 << 5)) +#define TSC2000_REG_Z2 ((0 << 11) | (3 << 5)) +#define TSC2000_REG_BAT1 ((0 << 11) | (5 << 5)) +#define TSC2000_REG_BAT2 ((0 << 11) | (6 << 5)) +#define TSC2000_REG_AUX1 ((0 << 11) | (7 << 5)) +#define TSC2000_REG_AUX2 ((0 << 11) | (8 << 5)) +#define TSC2000_REG_TEMP1 ((0 << 11) | (9 << 5)) +#define TSC2000_REG_TEMP2 ((0 << 11) | (0xA << 5)) +#define TSC2000_REG_DAC ((0 << 11) | (0xB << 5)) +#define TSC2000_REG_ZERO ((0 << 11) | (0x10 << 5)) +#define TSC2000_REG_ADC ((1 << 11) | (0 << 5)) +#define TSC2000_REG_DACCTL ((1 << 11) | (2 << 5)) +#define TSC2000_REG_REF ((1 << 11) | (3 << 5)) +#define TSC2000_REG_RESET ((1 << 11) | (4 << 5)) +#define TSC2000_REG_CONFIG ((1 << 11) | (5 << 5)) + +/* bit definition of TSC2000 ADC register */ +#define TC_PSM (1 << 15) +#define TC_STS (1 << 14) +#define TC_AD3 (1 << 13) +#define TC_AD2 (1 << 12) +#define TC_AD1 (1 << 11) +#define TC_AD0 (1 << 10) +#define TC_RS1 (1 << 9) +#define TC_RS0 (1 << 8) +#define TC_AV1 (1 << 7) +#define TC_AV0 (1 << 6) +#define TC_CL1 (1 << 5) +#define TC_CL0 (1 << 4) +#define TC_PV2 (1 << 3) +#define TC_PV1 (1 << 2) +#define TC_PV0 (1 << 1) + +/* default value for TSC2000 ADC register for use with touch functions */ +#define DEFAULT_ADC (TC_PV1 | TC_AV0 | TC_AV1 | TC_RS0) + +#define TSC2000_DELAY_BASE 500 +#define TSC2000_NO_SENSOR -0x10000 + +#define ERROR_BATTERY 220 /* must be adjusted, if R68 is changed on + * TRAB */ + +static void tsc2000_write(unsigned short, unsigned short); +static unsigned short tsc2000_read (unsigned short); +static u16 tsc2000_read_channel (unsigned int); +static void tsc2000_set_mux (unsigned int); +static void tsc2000_set_range (unsigned int); +void tsc2000_reg_init (void); +s32 tsc2000_contact_temp (void); +static void spi_wait_transmit_done (void); +void spi_init(void); +static int tsc2000_interpolate(long value, long data[][2], long *result); +static void adc_wait_conversion_done(void); + + +static inline void SET_CS_TOUCH(void) +{ + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + + gpio->PDDAT &= 0x5FF; +} + + +static inline void CLR_CS_TOUCH(void) +{ + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + + gpio->PDDAT |= 0x200; +} + +#endif /* _TSC2000_H_ */ diff --git a/common/cmd_vfd.c b/common/cmd_vfd.c index f04714981a..118c50dcbc 100644 --- a/common/cmd_vfd.c +++ b/common/cmd_vfd.c @@ -54,7 +54,7 @@ int do_vfd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 1; } - if (argv[1][0] == '#') { /* select bitmap by number */ + if (argv[1][0] == '/') { /* select bitmap by number */ bitmap = simple_strtoul(argv[1]+1, NULL, 10); return (trab_vfd(bitmap)); } @@ -68,8 +68,10 @@ int do_vfd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( vfd, 2, 0, do_vfd, "vfd - load a bitmap to the VFDs on TRAB\n", - "N\n" + "/N\n" " - load bitmap N to the VFDs (N is _decimal_ !!!)\n" + "vfd ADDR\n" + " - load bitmap at address ADDR\n" ); #endif /* CFG_CMD_VFD */ diff --git a/common/exports.c b/common/exports.c index 22002ccb38..9858217ae0 100644 --- a/common/exports.c +++ b/common/exports.c @@ -27,5 +27,9 @@ void jumptable_init (void) #if defined(CONFIG_I386) || defined(CONFIG_PPC) gd->jt[XF_install_hdlr] = (void *) irq_install_handler; gd->jt[XF_free_hdlr] = (void *) irq_free_handler; -#endif +#endif /* I386 || PPC */ +#if (CONFIG_COMMANDS & CFG_CMD_I2C) + gd->jt[XF_i2c_write] = (void *) i2c_write; + gd->jt[XF_i2c_read] = (void *) i2c_read; +#endif /* CFG_CMD_I2C */ } diff --git a/examples/Makefile b/examples/Makefile index febc501e9f..542791b8b8 100644 --- a/examples/Makefile +++ b/examples/Makefile @@ -69,6 +69,11 @@ ifeq ($(BOARD),oxc) SREC += eepro100_eeprom.srec endif +##ifeq ($(BOARD),trab) +##SREC += trab_fkt.srec +##BIN += trab_fkt.bin +##endif + OBJS = $(SREC:.srec=.o) LIB = libstubs.a diff --git a/include/_exports.h b/include/_exports.h index a4e1561137..17cb91be3d 100644 --- a/include/_exports.h +++ b/include/_exports.h @@ -10,3 +10,7 @@ EXPORT_FUNC(malloc) EXPORT_FUNC(free) EXPORT_FUNC(udelay) EXPORT_FUNC(get_timer) +#if (CONFIG_COMMANDS & CFG_CMD_I2C) +EXPORT_FUNC(i2c_write) +EXPORT_FUNC(i2c_read) +#endif /* CFG_CMD_I2C */ diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 44ea654be2..9d914a6bb3 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -191,8 +191,8 @@ /* * Various low-level settings */ -#define CFG_HID0_INIT 0 -#define CFG_HID0_FINAL 0 +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE #define CFG_BOOTCS_START CFG_FLASH_BASE #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE diff --git a/include/configs/trab.h b/include/configs/trab.h index d96241a2be..daa62a349a 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -314,6 +314,11 @@ #define CONFIG_MISC_INIT_R /* have misc_init_r() function */ +/*----------------------------------------------------------------------- + * burn-in test stuff + */ +#define BURN_IN_CYCLE_DELAY 20 /* delay in sec between burn-in test cycles */ + /*----------------------------------------------------------------------- * Stack sizes * diff --git a/include/exports.h b/include/exports.h index f812f16072..84bc56b7a0 100644 --- a/include/exports.h +++ b/include/exports.h @@ -18,6 +18,10 @@ void *malloc(size_t); void free(void*); void udelay(unsigned long); unsigned long get_timer(unsigned long); +#if (CONFIG_COMMANDS & CFG_CMD_I2C) +int i2c_write (uchar, uint, int , uchar* , int); +int i2c_read (uchar, uint, int , uchar* , int); +#endif /* CFG_CMD_I2C */ void app_startup(char **); @@ -31,7 +35,7 @@ enum { XF_MAX }; -#define XF_VERSION 1 +#define XF_VERSION 2 #if defined(CONFIG_I386) extern gd_t *global_data; -- cgit v1.2.1