From 216f2a7156a5fde7b47adc40ad553c888a9cbaa7 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Sun, 31 Aug 2008 16:33:29 -0500 Subject: Add SGMII support for the 8544 DS The 8544 DS has an optional SGMII Riser card, which uses different PHY addresses. Check if we are in SGMII mode, and invoke the SGMII Riser setup code if so. Signed-off-by: Andy Fleming Signed-off-by: Ben Warren --- board/freescale/mpc8544ds/mpc8544ds.c | 39 +++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 4e976b78fc..1e29773cbe 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -32,8 +32,10 @@ #include #include #include +#include #include "../common/pixis.h" +#include "../common/sgmii_riser.h" #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) extern void ddr_enable_ecc(unsigned int dram_size); @@ -463,6 +465,43 @@ get_board_sys_clk(ulong dummy) return val; } +#ifdef CONFIG_TSEC_ENET +int board_eth_init(bd_t *bis) +{ + struct tsec_info_struct tsec_info[2]; + volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif +#ifdef CONFIG_TSEC3 + SET_STD_TSEC_INFO(tsec_info[num], 3); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif + + if (!num) { + printf("No TSECs initialized\n"); + + return 0; + } + + if (io_sel & 1) + fsl_sgmii_riser_init(tsec_info, num); + + + tsec_eth_init(bis, tsec_info, num); + + return 0; +} +#endif + #if defined(CONFIG_OF_BOARD_SETUP) void -- cgit v1.2.1