From 0d3efd805618068f33ec8dd3610b1cd740afb5cd Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Mon, 27 May 2013 10:51:46 +1200 Subject: powerpc/CoreNet: Allow pbl images to take u-boot images != 512K Instead of assuming that SYS_TEXT_BASE is 0xFFF80000 calculate the initial pbl command offset by subtracting the image size from the top of the 24-bit address range. Also increase the size of the memory buffer to accommodate a larger output image. Signed-off-by: Chris Packham Signed-off-by: Andy Fleming --- tools/pblimage.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-) diff --git a/tools/pblimage.c b/tools/pblimage.c index 508a747a3f..5f39dc5bbf 100644 --- a/tools/pblimage.c +++ b/tools/pblimage.c @@ -26,18 +26,14 @@ #include "pblimage.h" /* - * The PBL can load up to 64 bytes at a time, so we split the U-Boot - * image into 64 byte chunks. PBL needs a command for each piece, of - * the form "81xxxxxx", where "xxxxxx" is the offset. SYS_TEXT_BASE - * is 0xFFF80000 for PBL boot, and PBL only cares about low 24-bit, - * so it starts from 0x81F80000. + * Initialize to an invalid value. */ -static uint32_t next_pbl_cmd = 0x81F80000; +static uint32_t next_pbl_cmd = 0x82000000; /* * need to store all bytes in memory for calculating crc32, then write the * bytes to image file for PBL boot. */ -static unsigned char mem_buf[600000]; +static unsigned char mem_buf[1000000]; static unsigned char *pmem_buf = mem_buf; static int pbl_size; static char *fname = "Unknown"; @@ -52,6 +48,27 @@ static union #define ENDIANNESS ((char)endian_test.l) +/* + * The PBL can load up to 64 bytes at a time, so we split the U-Boot + * image into 64 byte chunks. PBL needs a command for each piece, of + * the form "81xxxxxx", where "xxxxxx" is the offset. Calculate the + * start offset by subtracting the size of the u-boot image from the + * top of the allowable 24-bit range. + */ +static void init_next_pbl_cmd(FILE *fp_uboot) +{ + struct stat st; + int fd = fileno(fp_uboot); + + if (fstat(fd, &st) == -1) { + printf("Error: Could not determine u-boot image size. %s\n", + strerror(errno)); + exit(EXIT_FAILURE); + } + + next_pbl_cmd = 0x82000000 - st.st_size; +} + static void generate_pbl_cmd(void) { uint32_t val = next_pbl_cmd; @@ -80,6 +97,7 @@ static void pbl_fget(size_t size, FILE *stream) /* load split u-boot with PBI command 81xxxxxx. */ static void load_uboot(FILE *fp_uboot) { + init_next_pbl_cmd(fp_uboot); while (next_pbl_cmd < 0x82000000) { generate_pbl_cmd(); pbl_fget(64, fp_uboot); -- cgit v1.2.1