From 0657e46e28a3b0cf5fe1219f50a9f99fe7f9e90a Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 20 Jun 2014 13:54:52 +0900 Subject: mpc8xx: remove RPXlite_dw, quantum board support These boards are old enough and have no maintainers. Signed-off-by: Masahiro Yamada --- arch/powerpc/cpu/mpc8xx/cpu_init.c | 5 - arch/powerpc/cpu/mpc8xx/scc.c | 4 - arch/powerpc/cpu/mpc8xx/serial.c | 5 - board/RPXlite_dw/Makefile | 8 - board/RPXlite_dw/README | 161 ------------- board/RPXlite_dw/RPXlite_dw.c | 164 ------------- board/RPXlite_dw/flash.c | 474 ------------------------------------- board/RPXlite_dw/u-boot.lds | 82 ------- board/RPXlite_dw/u-boot.lds.debug | 121 ---------- board/quantum/Makefile | 8 - board/quantum/fpga.c | 247 ------------------- board/quantum/fpga.h | 16 -- board/quantum/quantum.c | 243 ------------------- board/quantum/u-boot.lds | 82 ------- board/quantum/u-boot.lds.debug | 114 --------- boards.cfg | 9 - doc/README.scrapyard | 2 + drivers/pcmcia/Makefile | 1 - drivers/pcmcia/mpc8xx_pcmcia.c | 10 - drivers/pcmcia/rpx_pcmcia.c | 73 ------ drivers/video/mpc8xx_lcd.c | 5 - include/common.h | 2 - include/commproc.h | 26 -- include/configs/RPXlite_DW.h | 462 ------------------------------------ include/configs/quantum.h | 430 --------------------------------- include/pcmcia.h | 5 +- post/cpu/mpc8xx/ether.c | 4 - post/cpu/mpc8xx/uart.c | 5 - 28 files changed, 3 insertions(+), 2765 deletions(-) delete mode 100644 board/RPXlite_dw/Makefile delete mode 100644 board/RPXlite_dw/README delete mode 100644 board/RPXlite_dw/RPXlite_dw.c delete mode 100644 board/RPXlite_dw/flash.c delete mode 100644 board/RPXlite_dw/u-boot.lds delete mode 100644 board/RPXlite_dw/u-boot.lds.debug delete mode 100644 board/quantum/Makefile delete mode 100644 board/quantum/fpga.c delete mode 100644 board/quantum/fpga.h delete mode 100644 board/quantum/quantum.c delete mode 100644 board/quantum/u-boot.lds delete mode 100644 board/quantum/u-boot.lds.debug delete mode 100644 drivers/pcmcia/rpx_pcmcia.c delete mode 100644 include/configs/RPXlite_DW.h delete mode 100644 include/configs/quantum.h diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c index 9c3102dc69..b4001de512 100644 --- a/arch/powerpc/cpu/mpc8xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c @@ -138,7 +138,6 @@ void cpu_init_f (volatile immap_t * immr) defined(CONFIG_MHPC) || \ defined(CONFIG_R360MPI) || \ defined(CONFIG_RMU) || \ - defined(CONFIG_RPXLITE) || \ defined(CONFIG_SPC1920) || \ defined(CONFIG_SPD823TS) @@ -206,10 +205,6 @@ void cpu_init_f (volatile immap_t * immr) __asm__ ("eieio"); } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG); -#if defined(CONFIG_RPXLITE) && defined(CONFIG_ENV_IS_IN_NVRAM) - rpxlite_init (); -#endif - #ifdef CONFIG_SYS_RCCR /* must be done before cpm_load_patch() */ /* write config value */ immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR; diff --git a/arch/powerpc/cpu/mpc8xx/scc.c b/arch/powerpc/cpu/mpc8xx/scc.c index da372d039e..7ed98b879f 100644 --- a/arch/powerpc/cpu/mpc8xx/scc.c +++ b/arch/powerpc/cpu/mpc8xx/scc.c @@ -461,10 +461,6 @@ static int scc_init (struct eth_device *dev, bd_t * bis) #error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined #endif -#ifdef CONFIG_RPXLITE - *((uchar *) BCSR0) |= BCSR0_ETHEN; -#endif - #if defined(CONFIG_NETVIA) #if defined(PA_ENET_PDN) immr->im_ioport.iop_papar &= ~PA_ENET_PDN; diff --git a/arch/powerpc/cpu/mpc8xx/serial.c b/arch/powerpc/cpu/mpc8xx/serial.c index 932141144c..802d4f1ca8 100644 --- a/arch/powerpc/cpu/mpc8xx/serial.c +++ b/arch/powerpc/cpu/mpc8xx/serial.c @@ -182,11 +182,6 @@ static int smc_init (void) #endif #endif /* CONFIG_FADS */ -#if defined(CONFIG_RPXLITE) - /* Enable Monitor Port Transceiver */ - *((uchar *) BCSR0) |= BCSR0_ENMONXCVR ; -#endif /* CONFIG_RPXLITE */ - /* Set the physical address of the host memory buffers in * the buffer descriptors. */ diff --git a/board/RPXlite_dw/Makefile b/board/RPXlite_dw/Makefile deleted file mode 100644 index eff33cff95..0000000000 --- a/board/RPXlite_dw/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = RPXlite_dw.o flash.o diff --git a/board/RPXlite_dw/README b/board/RPXlite_dw/README deleted file mode 100644 index 9e2d0f42a0..0000000000 --- a/board/RPXlite_dw/README +++ /dev/null @@ -1,161 +0,0 @@ - -After following the step of Yoo. Jonghoon and Wolfgang Denk, -I ported u-boot on RPXlite DW version board: RPXlite_DW or LITE_DW. - -There are at least three differences between the Yoo-ported RPXlite and the RPXlite_DW. - -Board(in U-Boot) version(in EmbeddedPlanet) CPU SDRAM FLASH -RPXlite RPXlite CW 850 16MB 4MB -RPXlite_DW RPXlite DW(EP 823 H1 DW) 823e 64MB 16MB - -This fireware is specially coded for EmbeddedPlanet Co. Software Development -Platform(RPXlite DW),which has a NEC NL6448BC20-08 LCD panel. - -It has the following three features: - -1. 64MHz/48MHz system frequence setting options. -The default setting is 48MHz.To get a 64MHz u-boot,just add -'64' in make command,like - -make distclean -make RPXlite_DW_64_config -make all - -2. CONFIG_ENV_IS_IN_FLASH/CONFIG_ENV_IS_IN_NVRAM - -The default environment parameter is stored in FLASH because it is a common choice for -environment parameter.So I make NVRAM as backup parameter storeage.The reason why I -didn't use EEPROM for ENV is that PlanetCore V2.0 use EEPROM as environment parameter -home.Because of the possibility of using two firewares on this board,I didn't -'disturb' EEPROM.To get NVRAM support,you may use the following build command: - -make distclean -make RPXlite_DW_NVRAM_config -make all - -3. LCD panel support - -To support the Platform better,I added LCD panel(NL6448BC20-08) function. -For the convenience of debug, CONFIG_PERBOOT was supported. So you just -perss ENTER if you want to get a serial console in boot downcounting. -Then you can switch to LCD and serial console freely just typing -'run lcd' or 'run ser'. They are only vaild when CONFIG_LCD was enabled. - -To get a LCD support u-boot,you can do the following: - -make distclean -make RPXlite_DW_LCD_config -make all - -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The basic make commands could be: - -make RPXlite_DW_config -make RPXlite_DW_64_config -make RPXlite_DW_LCD_config -make RPXlite_DW_NVRAM_config - -BTW,you can combine the above features together and get a workable u-boot to meet your need. -For example,to get a 64MHZ && ENV_IS_IN_FLASH && LCD panel support u-boot,you can type: - -make RPXlite_DW_NVRAM_64_LCD_config -make all - -So other combining make commands could be: - -make RPXlite_DW_NVRAM_64_config -make RPXlite_DW_NVRAM_LCD_config -make RPXlite_DW_64_LCD_config - -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -The boot process by "make RPXlite_DW_config" could be: - -U-Boot 1.1.2 (Aug 29 2004 - 15:11:27) - -CPU: PPC823EZTnnB2 at 48 MHz: 16 kB I-Cache 8 kB D-Cache -Board: RPXlite_DW -DRAM: 64 MB -FLASH: 16 MB -*** Warning - bad CRC, using default environment - -In: serial -Out: serial -Err: serial -Net: SCC ETHERNET -u-boot> - -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -A word on the U-Boot environment variable setting and usage : - -In the beginning, you could just need very simple default environment variable setting, -like[include/configs/RPXlite.h] : - -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -This is enough for kernel NFS test. But as debug process goes on, you would expect -to save some time on environment variable setting and u-boot/kernel updating. -So the default environment variable setting would become more complicated. Just like -the one I did in include/configs/RPXlite_DW.h. - -Two u-boot commands, ku and uu, should be careful to use. They were designed to update -kernel and u-boot image file respectively. You must tftp your image to default address -'100000' and then use them correctly. Yeah, you can create your own command to do this -job. :-) The example u-boot image updating process could be : - -u-boot>t 100000 RPXlite_DW_LCD.bin -Using SCC ETHERNET device -TFTP from server 172.16.115.6; our IP address is 172.16.115.7 -Filename 'RPXlite_DW_LCD.bin'. -Load address: 0x100000 -Loading: ############################# -done -Bytes transferred = 144700 (2353c hex) -u-boot>run uu -Un-Protect Flash Sectors 0-4 in Bank # 1 -Erase Flash Sectors 0-4 in Bank # 1 -.... done -Copy to Flash... done -ff000000: 27051956 552d426f 6f742031 2e312e32 '..VU-Boot 1.1.2 -ff000010: 20284175 67203239 20323030 34202d20 (Aug 29 2004 - -ff000020: 31353a32 303a3238 29000000 00000000 15:20:28)....... -ff000030: 00000000 00000000 00000000 00000000 ................ -ff000040: 00000000 00000000 00000000 00000000 ................ -ff000050: 00000000 00000000 00000000 00000000 ................ -ff000060: 00000000 00000000 00000000 00000000 ................ -ff000070: 00000000 00000000 00000000 00000000 ................ -ff000080: 00000000 00000000 00000000 00000000 ................ -ff000090: 00000000 00000000 00000000 00000000 ................ -ff0000a0: 00000000 00000000 00000000 00000000 ................ -ff0000b0: 00000000 00000000 00000000 00000000 ................ -ff0000c0: 00000000 00000000 00000000 00000000 ................ -ff0000d0: 00000000 00000000 00000000 00000000 ................ -ff0000e0: 00000000 00000000 00000000 00000000 ................ -ff0000f0: 00000000 00000000 00000000 00000000 ................ -u-boot updating finished -u-boot> - -Also for environment updating, 'run eu' could let you erase OLD default environment variable -and then use the working u-boot environment setting. - -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Finally, if you want to keep the serial port to possible debug on spot for deployment, you -just need to enable 'DEPLOYMENT' in RPXlite_DW.h as 'DEBUG' does. Only the special string -defined by CONFIG_AUTOBOOT_STOP_STR like 'st' can stop the autoboot. - -I'd like to extend my heartfelt gratitute to kind people for helping me work it out. -I would particually thank Wolfgang Denk for his nice help. - -Enjoy, - -Sam Song, samsongshu@yahoo.com.cn -Institute of Electrical Machinery and Controls -Shanghai University - -Oct. 11, 2004 diff --git a/board/RPXlite_dw/RPXlite_dw.c b/board/RPXlite_dw/RPXlite_dw.c deleted file mode 100644 index 29d52dec8c..0000000000 --- a/board/RPXlite_dw/RPXlite_dw.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * (C) Copyright 2004 - * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Sam Song - * U-Boot port on RPXlite DW board : RPXlite_DW or LITE_DW - * Tested on working at 64MHz(CPU)/32MHz(BUS),48MHz/24MHz - * with 64MB, 2 SDRAM Micron chips,MT48LC16M16A2-75. - */ - -#include -#include - -/* ------------------------------------------------------------------------- */ -static long int dram_size (long int, long int *, long int); -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFCC25 - -const uint sdram_table[] = -{ - /* - * Single Read. (Offset 00h in UPMA RAM) - */ - 0x0F03CC04, 0x00ACCC24, 0x1FF74C20, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, - - /* - * Burst Read. (Offset 08h in UPMA RAM) - */ - 0x0F03CC04, 0x00ACCC24, 0x00FFCC20, 0x00FFCC20, - 0x01FFCC20, 0x1FF74C20, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, - - /* - * Single Write. (Offset 18h in UPMA RAM) - */ - 0x0F03CC02, 0x00AC0C24, 0x1FF74C25, /* last */ - _NOT_USED_, _NOT_USED_, 0x0FA00C34,0x0FFFCC35, - _NOT_USED_, - - /* - * Burst Write. (Offset 20h in UPMA RAM) - */ - 0x0F03CC00, 0x00AC0C20, 0x00FFFC20, 0x00FFFC22, - 0x01FFFC24, 0x1FF74C25, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, - - /* - * Refresh. (Offset 30h in UPMA RAM) - */ - 0x0FF0CC24, 0xFFFFCC24, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, 0xEFFB8C34, 0x0FF74C34, - 0x0FFACCB4, 0x0FF5CC34, 0x0FFFCC34, 0x0FFFCCB4, - /* INIT sequence RAM WORDS - * SDRAM Initialization (offset 0x36 in UPMA RAM) - * The above definition uses the remaining space - * to establish an initialization sequence, - * which is executed by a RUN command. - * The sequence is COMMAND INHIBIT(NOP),Precharge, - * Load Mode Register,NOP,Auto Refresh. - */ - - /* - * Exception. (Offset 3Ch in UPMA RAM) - */ - 0x0FEA8C34, 0x1FB54C34, 0xFFFFCC34, _NOT_USED_ -}; - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - puts ("Board: RPXlite_DW\n") ; - return (0) ; -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size9; - - upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); - - /* Refresh clock prescalar */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR ; - - memctl->memc_mar = 0x00000088; - - /* Map controller banks 1 to the SDRAM bank */ - memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; - - memctl->memc_mamr = CONFIG_SYS_MAMR_9COL & (~(MAMR_PTAE)); /* no refresh yet */ - /*Disable Periodic timer A. */ - - udelay(200); - - /* perform SDRAM initializsation sequence */ - - memctl->memc_mcr = 0x80002236; /* SDRAM bank 0 - refresh twice */ - - udelay(1); - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - - /*Enable Periodic timer A */ - - udelay (1000); - - /* Check Bank 0 Memory Size - * try 9 column mode - */ - - size9 = dram_size (CONFIG_SYS_MAMR_9COL, SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE); - - /* - * Final mapping: - */ - - memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; - - udelay (1000); - - return (size9); -} - -void rpxlite_init (void) -{ - /* Enable NVRAM */ - *((uchar *) BCSR0) |= BCSR0_ENNVRAM; -} - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size (base, maxsize)); -} diff --git a/board/RPXlite_dw/flash.c b/board/RPXlite_dw/flash.c deleted file mode 100644 index c8de5ef5ee..0000000000 --- a/board/RPXlite_dw/flash.c +++ /dev/null @@ -1,474 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Yoo. Jonghoon, IPone, yooth@ipone.co.kr - * U-Boot port on RPXlite board - * - * Some of flash control words are modified. (from 2x16bit device - * to 4x8bit device) - * RPXLite board I tested has only 4 AM29LV800BB devices. Other devices - * are not tested. - * - * (?) Does an RPXLite board which - * does not use AM29LV800 flash memory exist ? - * I don't know... - */ - -/* Yes,Yoo.They do use other FLASH for the board. - * - * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn - * U-Boot port on RPXlite DW version board - * - * By now,it uses 4 AM29DL323DB90VI devices(4x8bit). - * The total FLASH has 16MB(4x4MB). - * I just made some necessary changes on the basis of Wolfgang and Yoo's job. - * - * June 8, 2004 */ - -#include -#include - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions vu_long : volatile unsigned long IN include/common.h - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -unsigned long flash_init (void) -{ - unsigned long size_b0 ; - int i; - - /* Init: no FLASHes known */ - for (i=0; i= CONFIG_SYS_FLASH_BASE - /* If Monitor is in the cope of FLASH,then - * protect this area by default in case for - * other occupation. [SAM] */ - - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1, - &flash_info[0]); -#endif - flash_info[0].size = size_b0; - return (size_b0); -} - -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x00010000; - info->start[3] = base + 0x00018000; - info->start[4] = base + 0x00020000; - info->start[5] = base + 0x00028000; - info->start[6] = base + 0x00030000; - info->start[7] = base + 0x00038000; - - for (i = 8; i < info->sector_count; i++) { - info->start[i] = base + ((i-7) * 0x00040000); - } - } else { - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00010000; - info->start[i--] = base + info->size - 0x00018000; - info->start[i--] = base + info->size - 0x00020000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00040000; - } - } - -} - -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - case FLASH_AMDL323B: printf ("AM29DL323B (32 Mbit, bottom boot sector)\n"); - break; - /* I just add the FLASH_AMDL323B for RPXlite_DW BOARD. [SAM] */ - default: printf ("Unknown Chip Type\n"); - break; - } - printf (" Size: %ld MB in %d Sectors\n",info->size >> 20, info->sector_count); - printf (" Sector Start Addresses:"); - for (i=0; isector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s",info->start[i],info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - /* Write auto select command: read Manufacturer ID */ - addr[0xAAA] = 0x00AA00AA ; - addr[0x555] = 0x00550055 ; - addr[0xAAA] = 0x00900090 ; - - value = addr[0] ; - switch (value & 0x00FF00FF) { - case AMD_MANUFACT: /* AMD_MANUFACT =0x00010001 in flash.h */ - info->flash_id = FLASH_MAN_AMD; /* FLASH_MAN_AMD=0x00000000 in flash.h */ - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr[2] ; /* device ID */ - switch (value & 0x00FF00FF) { - case (AMD_ID_LV400T & 0x00FF00FF): - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - case (AMD_ID_LV400B & 0x00FF00FF): - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - case (AMD_ID_LV800T & 0x00FF00FF): - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - case (AMD_ID_LV800B & 0x00FF00FF): - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00400000; /* Size doubled by yooth */ - break; /* => 4 MB */ - case (AMD_ID_LV160T & 0x00FF00FF): - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - case (AMD_ID_LV160B & 0x00FF00FF): - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - case (AMD_ID_DL323B & 0x00FF00FF): - info->flash_id += FLASH_AMDL323B; - info->sector_count = 71; - info->size = 0x01000000; - break; /* => 16 MB(4x4MB) */ - /* AMD_ID_DL323B= 0x22532253 FLASH_AMDL323B= 0x0013 - * AMD_ID_DL323B could be found in .[SAM] - * So we could get : flash_id = 0x00000013. - * The first four-bit represents VEDOR ID,leaving others for FLASH ID. */ - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* FLASH_BTYPE=0x0001 mask for bottom boot sector type.If the last bit equals 1, - * it means bottom boot flash. GOOD IDEA! [SAM] - */ - - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x00010000; - info->start[3] = base + 0x00018000; - info->start[4] = base + 0x00020000; - info->start[5] = base + 0x00028000; - info->start[6] = base + 0x00030000; - info->start[7] = base + 0x00038000; - - for (i = 8; i < info->sector_count; i++) { - info->start[i] = base + ((i-7) * 0x00040000) ; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00010000; - info->start[i--] = base + info->size - 0x00018000; - info->start[i--] = base + info->size - 0x00020000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00040000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - /* info->protect[i] = addr[4] & 1 ; */ - /* Mask it for disorder FLASH protection **[Sam]** */ - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (volatile unsigned long *)info->start[0]; - - *addr = 0xF0F0F0F0; /* reset bank */ - } - return (info->size); -} - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - addr[0xAAA] = 0x80808080; - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_long *)(info->start[sect]) ; - addr[0] = 0x30303030 ; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_long *)(info->start[l_sect]); - while ((addr[0] & 0x80808080) != 0x80808080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (vu_long *)info->start[0]; - addr[0] = 0xF0F0F0F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long *)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - addr[0xAAA] = 0xA0A0A0A0; - - *((vu_long *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} diff --git a/board/RPXlite_dw/u-boot.lds b/board/RPXlite_dw/u-boot.lds deleted file mode 100644 index 0eb2fba00c..0000000000 --- a/board/RPXlite_dw/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/RPXlite_dw/u-boot.lds.debug b/board/RPXlite_dw/u-boot.lds.debug deleted file mode 100644 index 0ea27e8759..0000000000 --- a/board/RPXlite_dw/u-boot.lds.debug +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/quantum/Makefile b/board/quantum/Makefile deleted file mode 100644 index 6918f63c3e..0000000000 --- a/board/quantum/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = quantum.o fpga.o diff --git a/board/quantum/fpga.c b/board/quantum/fpga.c deleted file mode 100644 index 4bd391a546..0000000000 --- a/board/quantum/fpga.c +++ /dev/null @@ -1,247 +0,0 @@ -/* - * (C) Copyright 2001-2003 - * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/* The DEBUG define must be before common to enable debugging */ -#undef DEBUG -#include -#include -#include -#include "fpga.h" -/* ------------------------------------------------------------------------- */ - -#define MAX_ONES 226 - -/* MPC850 port D */ -#define PD(bit) (1 << (15 - (bit))) -# define FPGA_INIT PD(11) /* FPGA init pin (ppc input) */ -# define FPGA_PRG PD(12) /* FPGA program pin (ppc output) */ -# define FPGA_CLK PD(13) /* FPGA clk pin (ppc output) */ -# define FPGA_DATA PD(14) /* FPGA data pin (ppc output) */ -# define FPGA_DONE PD(15) /* FPGA done pin (ppc input) */ - - -/* DDR 0 - input, 1 - output */ -#define FPGA_INIT_PDDIR FPGA_PRG | FPGA_CLK | FPGA_DATA /* just set outputs */ - - -#define SET_FPGA(data) immr->im_ioport.iop_pddat = (data) -#define GET_FPGA immr->im_ioport.iop_pddat - -#define FPGA_WRITE_1 { \ - SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \ - SET_FPGA(FPGA_PRG | FPGA_DATA); /* set data to 1 */ \ - SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set clock to 1 */ \ - SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */ - -#define FPGA_WRITE_0 { \ - SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \ - SET_FPGA(FPGA_PRG); /* set data to 0 */ \ - SET_FPGA(FPGA_PRG | FPGA_CLK); /* set clock to 1 */ \ - SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */ - - -int fpga_boot (unsigned char *fpgadata, int size) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - int i, index, len; - int count; - -#ifdef CONFIG_SYS_FPGA_SPARTAN2 - int j; - unsigned char data; -#else - unsigned char b; - int bit; -#endif - - debug ("fpga_boot: fpgadata = %p, size = %d\n", fpgadata, size); - - /* display infos on fpgaimage */ - printf ("FPGA:"); - index = 15; - for (i = 0; i < 4; i++) { - len = fpgadata[index]; - printf (" %s", &(fpgadata[index + 1])); - index += len + 3; - } - printf ("\n"); - - - index = 0; - -#ifdef CONFIG_SYS_FPGA_SPARTAN2 - /* search for preamble 0xFFFFFFFF */ - while (1) { - if ((fpgadata[index] == 0xff) && (fpgadata[index + 1] == 0xff) - && (fpgadata[index + 2] == 0xff) - && (fpgadata[index + 3] == 0xff)) - break; /* preamble found */ - else - index++; - } -#else - /* search for preamble 0xFF2X */ - for (index = 0; index < size - 1; index++) { - if ((fpgadata[index] == 0xff) - && ((fpgadata[index + 1] & 0xf0) == 0x30)) - break; - } - index += 2; -#endif - - debug ("FPGA: configdata starts at position 0x%x\n", index); - debug ("FPGA: length of fpga-data %d\n", size - index); - - /* - * Setup port pins for fpga programming - */ - immr->im_ioport.iop_pddir = FPGA_INIT_PDDIR; - - debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE"); - debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT"); - - /* - * Init fpga by asserting and deasserting PROGRAM* - */ - SET_FPGA (FPGA_CLK | FPGA_DATA); - - /* Wait for FPGA init line low */ - count = 0; - while (GET_FPGA & FPGA_INIT) { - udelay (1000); /* wait 1ms */ - /* Check for timeout - 100us max, so use 3ms */ - if (count++ > 3) { - debug ("FPGA: Booting failed!\n"); - return ERROR_FPGA_PRG_INIT_LOW; - } - } - - debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE"); - debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT"); - - /* deassert PROGRAM* */ - SET_FPGA (FPGA_PRG | FPGA_CLK | FPGA_DATA); - - /* Wait for FPGA end of init period . */ - count = 0; - while (!(GET_FPGA & FPGA_INIT)) { - udelay (1000); /* wait 1ms */ - /* Check for timeout */ - if (count++ > 3) { - debug ("FPGA: Booting failed!\n"); - return ERROR_FPGA_PRG_INIT_HIGH; - } - } - - debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE"); - debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT"); - - debug ("write configuration data into fpga\n"); - /* write configuration-data into fpga... */ - -#ifdef CONFIG_SYS_FPGA_SPARTAN2 - /* - * Load uncompressed image into fpga - */ - for (i = index; i < size; i++) { -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK - if ((i % 1024) == 0) - printf ("%6d out of %6d\r", i, size); /* let them know we are alive */ -#endif - - data = fpgadata[i]; - for (j = 0; j < 8; j++) { - if ((data & 0x80) == 0x80) { - FPGA_WRITE_1; - } else { - FPGA_WRITE_0; - } - data <<= 1; - } - } - /* add some 0xff to the end of the file */ - for (i = 0; i < 8; i++) { - data = 0xff; - for (j = 0; j < 8; j++) { - if ((data & 0x80) == 0x80) { - FPGA_WRITE_1; - } else { - FPGA_WRITE_0; - } - data <<= 1; - } - } -#else - /* send 0xff 0x20 */ - FPGA_WRITE_1; - FPGA_WRITE_1; - FPGA_WRITE_1; - FPGA_WRITE_1; - FPGA_WRITE_1; - FPGA_WRITE_1; - FPGA_WRITE_1; - FPGA_WRITE_1; - FPGA_WRITE_0; - FPGA_WRITE_0; - FPGA_WRITE_1; - FPGA_WRITE_0; - FPGA_WRITE_0; - FPGA_WRITE_0; - FPGA_WRITE_0; - FPGA_WRITE_0; - - /* - ** Bit_DeCompression - ** Code 1 .. maxOnes : n '1's followed by '0' - ** maxOnes + 1 .. maxOnes + 1 : n - 1 '1's no '0' - ** maxOnes + 2 .. 254 : n - (maxOnes + 2) '0's followed by '1' - ** 255 : '1' - */ - - for (i = index; i < size; i++) { - b = fpgadata[i]; - if ((b >= 1) && (b <= MAX_ONES)) { - for (bit = 0; bit < b; bit++) { - FPGA_WRITE_1; - } - FPGA_WRITE_0; - } else if (b == (MAX_ONES + 1)) { - for (bit = 1; bit < b; bit++) { - FPGA_WRITE_1; - } - } else if ((b >= (MAX_ONES + 2)) && (b <= 254)) { - for (bit = 0; bit < (b - (MAX_ONES + 2)); bit++) { - FPGA_WRITE_0; - } - FPGA_WRITE_1; - } else if (b == 255) { - FPGA_WRITE_1; - } - } -#endif - debug ("\n\n"); - debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE"); - debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT"); - - /* - * Check if fpga's DONE signal - correctly booted ? - */ - - /* Wait for FPGA end of programming period . */ - count = 0; - while (!(GET_FPGA & FPGA_DONE)) { - udelay (1000); /* wait 1ms */ - /* Check for timeout */ - if (count++ > 3) { - debug ("FPGA: Booting failed!\n"); - return ERROR_FPGA_PRG_DONE; - } - } - - debug ("FPGA: Booting successful!\n"); - return 0; -} diff --git a/board/quantum/fpga.h b/board/quantum/fpga.h deleted file mode 100644 index a9f4086297..0000000000 --- a/board/quantum/fpga.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * (C) Copyright 2002 - * Rich Ireland, Enterasys Networks, rireland@enterasys.com. - * Keith Outwater, keith_outwater@mvis.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Virtex2 FPGA configuration support for the QUANTUM computer - */ -int fpga_boot(unsigned char *fpgadata, int size); - -#define ERROR_FPGA_PRG_INIT_LOW -1 /* Timeout after PRG* asserted */ -#define ERROR_FPGA_PRG_INIT_HIGH -2 /* Timeout after PRG* deasserted */ -#define ERROR_FPGA_PRG_DONE -3 /* Timeout after programming */ diff --git a/board/quantum/quantum.c b/board/quantum/quantum.c deleted file mode 100644 index 17e3fc2679..0000000000 --- a/board/quantum/quantum.c +++ /dev/null @@ -1,243 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include -#include -#include "fpga.h" - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (long int, long int *, long int); -unsigned long flash_init (void); - -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFCC25 - -const uint sdram_table[] = { - /* - * Single Read. (Offset 00h in UPMA RAM) - */ - 0x0F03CC04, 0x00ACCC24, 0x1FF74C20, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Burst Read. (Offset 08h in UPMA RAM) - */ - 0x0F03CC04, 0x00ACCC24, 0x00FFCC20, 0x00FFCC20, - 0x01FFCC20, 0x1FF74C20, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Single Write. (Offset 18h in UPMA RAM) - */ - 0x0F03CC02, 0x00AC0C24, 0x1FF74C25, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Burst Write. (Offset 20h in UPMA RAM) - */ - 0x0F03CC00, 0x00AC0C20, 0x00FFFC20, 0x00FFFC22, - 0x01FFFC24, 0x1FF74C25, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Refresh. (Offset 30h in UPMA RAM) - * (Initialization code at 0x36) - */ - 0x0FF0CC24, 0xFFFFCC24, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, 0xEFFB8C34, 0x0FF74C34, - 0x0FFACCB4, 0x0FF5CC34, 0x0FFCC34, 0x0FFFCCB4, - - /* - * Exception. (Offset 3Ch in UPMA RAM) - */ - 0x0FEA8C34, 0x1FB54C34, 0xFFFFCC34, _NOT_USED_ -}; - -/* ------------------------------------------------------------------------- */ - - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - char buf[64]; - int i; - int l = getenv_f("serial#", buf, sizeof(buf)); - - puts ("Board QUANTUM, Serial No: "); - - for (i = 0; i < l; ++i) { - if (buf[i] == ' ') - break; - putc (buf[i]); - } - putc ('\n'); - return (0); /* success */ -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size9; - - upmconfig (UPMA, (uint *) sdram_table, - sizeof (sdram_table) / sizeof (uint)); - - /* Refresh clock prescalar */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - - memctl->memc_mar = 0x00000088; - - /* Map controller banks 1 to the SDRAM bank */ - memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; - - memctl->memc_mamr = CONFIG_SYS_MAMR_9COL & (~(MAMR_PTAE)); /* no refresh yet */ - - udelay (200); - - /* perform SDRAM initializsation sequence */ - - memctl->memc_mcr = 0x80002136; /* SDRAM bank 0 */ - udelay (1); - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - - udelay (1000); - - /* Check Bank 0 Memory Size, - * 9 column mode - */ - size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE_PRELIM, - SDRAM_MAX_SIZE); - /* - * Final mapping: - */ - memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; - udelay (1000); - - return (size9); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile ulong *addr; - ulong cnt, val, size; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; - - memctl->memc_mamr = mamr_value; - - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = (volatile ulong *)(base + cnt); /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = (volatile ulong *)base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - /* Restore the original data before leaving the function. - */ - *addr = save[i]; - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - *addr = save[--i]; - } - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = (volatile ulong *)(base + cnt); /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - size = cnt * sizeof (long); - /* Restore the original data before returning - */ - for (cnt <<= 1; cnt <= maxsize / sizeof (long); - cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - *addr = save[--i]; - } - return (size); - } - } - return (maxsize); -} - -/* - * Miscellaneous intialization - */ -int misc_init_r (void) -{ - char *fpga_data_str = getenv ("fpgadata"); - char *fpga_size_str = getenv ("fpgasize"); - void *fpga_data; - int fpga_size; - int status; - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - int flash_size; - - /* Remap FLASH according to real size */ - flash_size = flash_init (); - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-flash_size & 0xFFFF8000); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; - - if (fpga_data_str && fpga_size_str) { - fpga_data = (void *) simple_strtoul (fpga_data_str, NULL, 16); - fpga_size = simple_strtoul (fpga_size_str, NULL, 10); - - status = fpga_boot (fpga_data, fpga_size); - if (status != 0) { - printf ("\nFPGA: Booting failed "); - switch (status) { - case ERROR_FPGA_PRG_INIT_LOW: - printf ("(Timeout: INIT not low after asserting PROGRAM*)\n "); - break; - case ERROR_FPGA_PRG_INIT_HIGH: - printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n "); - break; - case ERROR_FPGA_PRG_DONE: - printf ("(Timeout: DONE not high after programming FPGA)\n "); - break; - } - } - } - return 0; -} diff --git a/board/quantum/u-boot.lds b/board/quantum/u-boot.lds deleted file mode 100644 index 0eb2fba00c..0000000000 --- a/board/quantum/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/quantum/u-boot.lds.debug b/board/quantum/u-boot.lds.debug deleted file mode 100644 index b2c562c33d..0000000000 --- a/board/quantum/u-boot.lds.debug +++ /dev/null @@ -1,114 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/boards.cfg b/boards.cfg index 2a3c2ff7f8..e5665ddd02 100644 --- a/boards.cfg +++ b/boards.cfg @@ -977,7 +977,6 @@ Active powerpc mpc86xx - freescale mpc8610hpcd Active powerpc mpc86xx - xes - xpedite517x - - Active powerpc mpc8xx - - - hermes - Wolfgang Denk Active powerpc mpc8xx - - - lwmon - Wolfgang Denk -Active powerpc mpc8xx - - - quantum - - Active powerpc mpc8xx - - - RRvision - Wolfgang Denk Active powerpc mpc8xx - - - spc1920 - - Active powerpc mpc8xx - - - v37 - - @@ -1010,14 +1009,6 @@ Active powerpc mpc8xx - - netvia Active powerpc mpc8xx - - netvia NETVIA_V2 NETVIA:NETVIA_VERSION=2 Pantelis Antoniou Active powerpc mpc8xx - - r360mpi R360MPI - Wolfgang Denk Active powerpc mpc8xx - - rbc823 RBC823 - - -Active powerpc mpc8xx - - RPXlite_dw RPXlite_DW - - -Active powerpc mpc8xx - - RPXlite_dw RPXlite_DW_64 RPXlite_DW:RPXlite_64MHz - -Active powerpc mpc8xx - - RPXlite_dw RPXlite_DW_64_LCD RPXlite_DW:RPXlite_64MHz,LCD,NEC_NL6448BC20 - -Active powerpc mpc8xx - - RPXlite_dw RPXlite_DW_LCD RPXlite_DW:LCD,NEC_NL6448BC20 - -Active powerpc mpc8xx - - RPXlite_dw RPXlite_DW_NVRAM RPXlite_DW:ENV_IS_IN_NVRAM - -Active powerpc mpc8xx - - RPXlite_dw RPXlite_DW_NVRAM_64 RPXlite_DW:RPXlite_64MHz,ENV_IS_IN_NVRAM - -Active powerpc mpc8xx - - RPXlite_dw RPXlite_DW_NVRAM_64_LCD RPXlite_DW:RPXlite_64MHz,LCD,NEC_NL6448BC20,ENV_IS_IN_NVRAM - -Active powerpc mpc8xx - - RPXlite_dw RPXlite_DW_NVRAM_LCD RPXlite_DW:LCD,NEC_NL6448BC20,ENV_IS_IN_NVRAM - Active powerpc mpc8xx - - RRvision RRvision_LCD RRvision:LCD,SHARP_LQ104V7DS01 Wolfgang Denk Active powerpc mpc8xx - - spd8xx SPD823TS - Wolfgang Denk Active powerpc mpc8xx - eltec mhpc MHPC - Frank Gottschling diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 6d340d5d8a..017c25ba9e 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,8 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +quantum powerpc mpc8xx - - +RPXlite_dw powerpc mpc8xx - - qs850 powerpc mpc8xx - - qs860t powerpc mpc8xx - - simpc8313 powerpc mpc83xx 7445207f 2014-06-05 Ron Madrid diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index ae3cafbea4..91821f4c77 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -7,7 +7,6 @@ obj-$(CONFIG_I82365) += i82365.o obj-$(CONFIG_8xx) += mpc8xx_pcmcia.o -obj-y += rpx_pcmcia.o obj-$(CONFIG_IDE_TI_CARDBUS) += ti_pci1410a.o obj-y += tqm8xx_pcmcia.o obj-$(CONFIG_MARUBUN_PCCARD) += marubun_pcmcia.o diff --git a/drivers/pcmcia/mpc8xx_pcmcia.c b/drivers/pcmcia/mpc8xx_pcmcia.c index 663827780e..af774260ee 100644 --- a/drivers/pcmcia/mpc8xx_pcmcia.c +++ b/drivers/pcmcia/mpc8xx_pcmcia.c @@ -211,16 +211,6 @@ static u_int m8xx_get_graycode(u_int size) #if 0 -#if defined(CONFIG_RPXLITE) - -/* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks. - * SYPCR is write once only, therefore must the slowest memory be faster - * than the bus monitor or we will get a machine check due to the bus timeout. - */ -#undef PCMCIA_BMT_LIMIT -#define PCMCIA_BMT_LIMIT (6*8) -#endif - static u_int m8xx_get_speed(u_int ns, u_int is_io) { u_int reg, clocks, psst, psl, psht; diff --git a/drivers/pcmcia/rpx_pcmcia.c b/drivers/pcmcia/rpx_pcmcia.c deleted file mode 100644 index 5b24f0bfbe..0000000000 --- a/drivers/pcmcia/rpx_pcmcia.c +++ /dev/null @@ -1,73 +0,0 @@ -/* -------------------------------------------------------------------- */ -/* RPX Boards from Embedded Planet */ -/* -------------------------------------------------------------------- */ -#include -#ifdef CONFIG_8xx -#include -#endif -#include - -#undef CONFIG_PCMCIA - -#if defined(CONFIG_CMD_PCMCIA) -#define CONFIG_PCMCIA -#endif - -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) -#define CONFIG_PCMCIA -#endif - -#if defined(CONFIG_PCMCIA) \ - && defined(CONFIG_RPXLITE) - -#define PCMCIA_BOARD_MSG "RPX CLASSIC or RPX LITE" - -int pcmcia_voltage_set(int slot, int vcc, int vpp) -{ - u_long reg = 0; - - switch(vcc) { - case 0: break; - case 33: reg |= BCSR1_PCVCTL4; break; - case 50: reg |= BCSR1_PCVCTL5; break; - default: return 1; - } - - switch(vpp) { - case 0: break; - case 33: - case 50: - if(vcc == vpp) - reg |= BCSR1_PCVCTL6; - else - return 1; - break; - case 120: - reg |= BCSR1_PCVCTL7; - default: return 1; - } - - /* first, turn off all power */ - *((uint *)RPX_CSR_ADDR) &= ~(BCSR1_PCVCTL4 | BCSR1_PCVCTL5 - | BCSR1_PCVCTL6 | BCSR1_PCVCTL7); - - /* enable new powersettings */ - *((uint *)RPX_CSR_ADDR) |= reg; - - return 0; -} - -int pcmcia_hardware_enable (int slot) -{ - return 0; /* No hardware to enable */ -} - -#if defined(CONFIG_CMD_PCMCIA) -static int pcmcia_hardware_disable(int slot) -{ - return 0; /* No hardware to disable */ -} -#endif - - -#endif /* CONFIG_PCMCIA && CONFIG_RPXLITE */ diff --git a/drivers/video/mpc8xx_lcd.c b/drivers/video/mpc8xx_lcd.c index fceed871a7..b6062f9128 100644 --- a/drivers/video/mpc8xx_lcd.c +++ b/drivers/video/mpc8xx_lcd.c @@ -268,11 +268,6 @@ void lcd_ctrl_init (void *lcdbase) * the controller. */ -#ifdef CONFIG_RPXLITE - /* This is special for RPXlite_DW Software Development Platform **[Sam]** */ - panel_info.vl_dp = CONFIG_SYS_LOW; -#endif - lccrtmp = LCDBIT (LCCR_BNUM_BIT, (((panel_info.vl_row * panel_info.vl_col) * (1 << LCD_BPP)) / 128)); diff --git a/include/common.h b/include/common.h index 2e5a6d3d2f..136a445139 100644 --- a/include/common.h +++ b/include/common.h @@ -499,8 +499,6 @@ extern ssize_t spi_read (uchar *, int, uchar *, int); extern ssize_t spi_write (uchar *, int, uchar *, int); #endif -void rpxlite_init (void); - #ifdef CONFIG_HERMES /* $(BOARD)/hermes.c */ void hermes_start_lxt980 (int speed); diff --git a/include/commproc.h b/include/commproc.h index 5992f11de3..ef59df9388 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -900,32 +900,6 @@ typedef struct scc_enet { #endif /* CONFIG_NETVIA */ -/*** RPXLITE ********************************************************/ - -#ifdef CONFIG_RPXLITE -/* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of - * this may be unique to the RPX-Lite configuration. - * Note TENA is on Port B. - */ -#define PROFF_ENET PROFF_SCC2 -#define CPM_CR_ENET CPM_CR_CH_SCC2 -#define SCC_ENET 1 -#define PA_ENET_RXD ((ushort)0x0004) -#define PA_ENET_TXD ((ushort)0x0008) -#define PA_ENET_TCLK ((ushort)0x0200) -#define PA_ENET_RCLK ((ushort)0x0800) -#if defined(CONFIG_RMU) -#define PC_ENET_TENA ((uint)0x00000002) /* PC14 */ -#else -#define PB_ENET_TENA ((uint)0x00002000) -#endif -#define PC_ENET_CLSN ((ushort)0x0040) -#define PC_ENET_RENA ((ushort)0x0080) - -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00003d00) -#endif /* CONFIG_RPXLITE */ - /*** SM850 *********************************************************/ /* The SM850 Service Module uses SCC2 for IrDA and SCC3 for Ethernet */ diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h deleted file mode 100644 index 50c82c68eb..0000000000 --- a/include/configs/RPXlite_DW.h +++ /dev/null @@ -1,462 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -/* Yoo. Jonghoon, IPone, yooth@ipone.co.kr - * U-BOOT port on RPXlite board - */ - -/* - * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn - * U-BOOT port on RPXlite DW version board--RPXlite_DW - * June 8 ,2004 - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -/* #define DEBUG 1 */ -/* #define DEPLOYMENT 1 */ - -#undef CONFIG_MPC860 -#define CONFIG_MPC823 1 /* This is a MPC823e CPU. */ -#define CONFIG_RPXLITE 1 /* RPXlite DW version board */ - -#define CONFIG_SYS_TEXT_BASE 0xff000000 - -#ifdef CONFIG_LCD /* with LCD controller ? */ -#define CONFIG_MPC8XX_LCD -#define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/ -#endif - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 /* console default baudrate = 9600bps */ - -#ifdef DEBUG -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 6 /* autoboot after 6 seconds */ - -#ifdef DEPLOYMENT -#define CONFIG_BOOT_RETRY_TIME -1 -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT \ - "autoboot in %d seconds (stop with 'st')...\n", bootdelay -#define CONFIG_AUTOBOOT_STOP_STR "st" -#define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_RESET_TO_RETRY 1 -#define CONFIG_BOOT_RETRY_MIN 1 -#endif /* DEPLOYMENT */ -#endif /* DEBUG */ - -/* pre-boot commands */ -#define CONFIG_PREBOOT "setenv stdout serial;setenv stdin serial" - -#undef CONFIG_BOOTARGS -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs console=tty0 console=ttyS0,9600 " \ - "root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs console=tty0 root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ - "gatewayip=172.16.115.254\0" \ - "netmask=255.255.255.0\0" \ - "kernel_addr=ff040000\0" \ - "ramdisk_addr=ff200000\0" \ - "ku=era ${kernel_addr} ff1fffff;cp.b 100000 ${kernel_addr} " \ - "${filesize};md ${kernel_addr};" \ - "echo kernel updating finished\0" \ - "uu=protect off 1:0-4;era 1:0-4;cp.b 100000 ff000000 " \ - "${filesize};md ff000000;" \ - "echo u-boot updating finished\0" \ - "eu=protect off 1:6;era 1:6;reset\0" \ - "lcd=setenv stdout lcd;setenv stdin lcd\0" \ - "ser=setenv stdout serial;setenv stdin serial\0" \ - "verify=no" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#undef CONFIG_STATUS_LED /* disturbs display. Status LED disabled. */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#if 1 /* Enable this stuff could make image enlarge about 25KB. Mask it if you - don't want the advanced function */ - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_PING -#define CONFIG_CMD_ELF -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_DHCP - -#ifdef CONFIG_SPLASH_SCREEN -#define CONFIG_CMD_BMP -#endif - - -/* test-only */ -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ - -#define CONFIG_NETCONSOLE - -#endif /* 1 */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "u-boot>" /* Monitor Command Prompt */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0040000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00C0000 /* 4 ... 12 MB in DRAM */ -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFA200000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFF000000 - -#if defined(DEBUG) || defined(CONFIG_CMD_IDE) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ -#endif - -#define CONFIG_SYS_MONITOR_BASE 0xFF000000 -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#ifdef CONFIG_ENV_IS_IN_NVRAM -#define CONFIG_ENV_ADDR 0xFA000100 -#define CONFIG_ENV_SIZE 0x1000 -#else -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_OFFSET 0x30000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */ -#endif /* CONFIG_ENV_IS_IN_NVRAM */ - -#define CONFIG_SYS_RESET_ADDRESS ((ulong)((((immap_t *)CONFIG_SYS_IMMR)->im_clkrst.res))) - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 32-bit 12-35 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif /* We can get SYPCR: 0xFFFF0689. */ - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 32-bit 12-30 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC10) /* SIUMCR:0x00000800 */ - -/*--------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 16-bit 12-16 - *--------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE) -/* TBSCR: 0x00C3 [SAM] */ - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 16-bit 12-18 - *----------------------------------------------------------------------- - * [RTC enabled but not stopped on FRZ] - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTE) /* RTCSC:0x00C1 */ - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 16-bit 12-23 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - * [Periodic timer enabled,Periodic timer interrupt disable. ] - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE) /* PISCR:0x0083 */ - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 32-bit 5-7 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - */ -/* up to 64 MHz we use a 1:2 clock */ -#if defined(RPXlite_64MHz) -#define CONFIG_SYS_PLPRCR ( (7 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS ) /*PLPRCR: 0x00700000. */ -#else -#define CONFIG_SYS_PLPRCR ( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS ) -#endif - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 5-3 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF00 -/* Up to 48MHz system clock, we use 1:1 SYSTEM/BUS ratio */ -#if defined(RPXlite_64MHz) -#define CONFIG_SYS_SCCR ( SCCR_TBS | SCCR_EBDF01 ) /* %%%SCCR:0x02020000 */ -#else -#define CONFIG_SYS_SCCR ( SCCR_TBS | SCCR_EBDF00 ) /* %%%SCCR:0x02000000 */ -#endif - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ -#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ -#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0 and OR0 (FLASH) - */ -#define FLASH_BASE_PRELIM 0xFC000000 /* FLASH base */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFC000000 /* OR addr mask */ - -/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 8, ETHR = 0, BIH = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_8_CLK | OR_BI) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V) - -/* - * BR1 and OR1 (SDRAM) - * - */ -#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */ -#define SDRAM_MAX_SIZE 0x08000000 /* max 128 MB in system */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000E00 -#define CONFIG_SYS_OR_AM_SDRAM (-(SDRAM_MAX_SIZE & OR_AM_MSK)) -#define CONFIG_SYS_OR1_PRELIM ( CONFIG_SYS_OR_AM_SDRAM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* RPXlite mem setting */ -#define CONFIG_SYS_BR3_PRELIM 0xFA400001 /* BCSR */ -#define CONFIG_SYS_OR3_PRELIM 0xFF7F8900 -#define CONFIG_SYS_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */ -#define CONFIG_SYS_OR4_PRELIM 0xFFFE0040 - -/* - * Memory Periodic Timer Prescaler - */ -/* periodic timer for refresh */ -#if defined(RPXlite_64MHz) -#define CONFIG_SYS_MAMR_PTA 32 -#else -#define CONFIG_SYS_MAMR_PTA 20 -#endif - -/* - * Refresh clock Prescalar - */ -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV2 - -/* - * MAMR settings for SDRAM - */ - -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10) -/* CONFIG_SYS_MAMR_9COL:0x20904000 @ 64MHz */ - -/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ -/* Configuration variable added by yooth. */ -/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ -/* - * BCSRx - * - * Board Status and Control Registers - * - */ -#define BCSR0 0xFA400000 -#define BCSR1 0xFA400001 -#define BCSR2 0xFA400002 -#define BCSR3 0xFA400003 - -#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */ -#define BCSR0_ENNVRAM 0x02 /* CS4# Control */ -#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */ -#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */ -#define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */ -#define BCSR0_COLTEST 0x20 -#define BCSR0_ETHLPBK 0x40 -#define BCSR0_ETHEN 0x80 - -#define BCSR1_PCVCTL7 0x01 /* PC Slot B Control */ -#define BCSR1_PCVCTL6 0x02 -#define BCSR1_PCVCTL5 0x04 -#define BCSR1_PCVCTL4 0x08 -#define BCSR1_IPB5SEL 0x10 - -#define BCSR1_SMC1CTS 0x40 /* Added by SAM. */ -#define BCSR1_SMC1TRS 0x80 /* Added by SAM. */ - -#define BCSR2_ENRTCIRQ 0x01 /* Added by SAM. */ -#define BCSR2_ENBRG1 0x04 /* Added by SAM. */ - -#define BCSR2_ENPA5HDR 0x08 /* USB Control */ -#define BCSR2_ENUSBCLK 0x10 -#define BCSR2_USBPWREN 0x20 -#define BCSR2_USBSPD 0x40 -#define BCSR2_USBSUSP 0x80 - -#define BCSR3_BWKAPWR 0x01 /* Changed by SAM. Backup battery situation */ -#define BCSR3_IRQRTC 0x02 /* Changed by SAM. NVRAM Battery */ -#define BCSR3_RDY_BSY 0x04 /* Changed by SAM. Flash Operation */ -#define BCSR3_MPLX_LIN 0x08 /* Changed by SAM. Linear or Multiplexed address Mode */ - -#define BCSR3_D27 0x10 /* Dip Switch settings */ -#define BCSR3_D26 0x20 -#define BCSR3_D25 0x40 -#define BCSR3_D24 0x80 - -/* - * Environment setting - */ -#define CONFIG_ETHADDR 00:10:EC:00:37:5B -#define CONFIG_IPADDR 172.16.115.7 -#define CONFIG_SERVERIP 172.16.115.6 -#define CONFIG_ROOTPATH "/workspace/myfilesystem/target/" -#define CONFIG_BOOTFILE "uImage.rpxusb" -#define CONFIG_HOSTNAME LITE_H1_DW - -#endif /* __CONFIG_H */ diff --git a/include/configs/quantum.h b/include/configs/quantum.h deleted file mode 100644 index f3540c1421..0000000000 --- a/include/configs/quantum.h +++ /dev/null @@ -1,430 +0,0 @@ -/* - * (C) Copyright 2003-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - * changes for 16M board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#undef CONFIG_MPC860 -#define CONFIG_MPC850 1 /* This is a MPC850 CPU */ -#define CONFIG_RPXLITE 1 /* QUANTUM is the RPXlite clone */ -#define CONFIG_RMU 1 /* The QUNATUM is based on our RMU */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600bps */ -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -/* default developmenmt environment */ - -#define CONFIG_ETHADDR 00:0B:17:00:00:00 - -#define CONFIG_IPADDR 10.10.69.10 -#define CONFIG_SERVERIP 10.10.69.49 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_HOSTNAME QUANTUM -#define CONFIG_ROOTPATH "/opt/eldk/pcc_8xx" - -#define CONFIG_BOOTARGS "root=/dev/ram rw" - -#define CONFIG_BOOTCOMMAND "bootm ff000000" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "serial#=12345\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" - -/* - * Select the more full-featured memory test (Barr embedded systems) - */ -#define CONFIG_SYS_ALT_MEMTEST - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - - -/* M48T02 Paralled access timekeeper with same interface as the M48T35A*/ -#define CONFIG_RTC_M48T35A 1 - -#if 0 -#define CONFIG_WATCHDOG 1 /* watchdog enabled */ -#else -#undef CONFIG_WATCHDOG -#endif - -/* NVRAM and RTC */ -#define CONFIG_SYS_NVRAM_BASE_ADDR 0xFA000000 -#define CONFIG_SYS_NVRAM_SIZE 2048 - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SNTP - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT \ - "\nEnter password - autoboot in %d sec...\n", bootdelay -#define CONFIG_AUTOBOOT_DELAY_STR "system" -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00040000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x01f00000 /* 256K ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFA200000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFF000000 - -#if 1 - #define CONFIG_FLASH_CFI_DRIVER -#else - #undef CONFIG_FLASH_CFI_DRIVER -#endif - - -#ifdef CONFIG_FLASH_CFI_DRIVER - #define CONFIG_SYS_FLASH_CFI 1 - #undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE - #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#endif - -/*%%% #define CONFIG_SYS_FLASH_BASE 0xFFF00000 */ -#if defined(DEBUG) || defined(CONFIG_CMD_IDE) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE 0xFFF00000 -/*%%% #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector absolute address 0xfff40000*/ -#define CONFIG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* FPGA */ -#define CONFIG_MISC_INIT_R -#define CONFIG_SYS_FPGA_SPARTAN2 -#define CONFIG_SYS_FPGA_PROG_FEEDBACK - - -/*----------------------------------------------------------------------- - * Reset address - */ -#define CONFIG_SYS_RESET_ADDRESS ((ulong)((((immap_t *)CONFIG_SYS_IMMR)->im_clkrst.res))) - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC10) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -/*%%%#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! - */ -/* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_PLPRCR ( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS ) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF00 -/* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_TBS) - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ -#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/*#define CONFIG_SYS_DER 0x2002000F*/ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0 and OR0 (FLASH) - */ - -#define FLASH_BASE_PRELIM 0xFE000000 /* FLASH base */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFE000000 /* OR addr mask */ - -/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI) - -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V) - -/* - * BR1 and OR1 (SDRAM) - * - */ -#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */ -#define SDRAM_MAX_SIZE 0x08000000 /* max 128 MB */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000E00 - -#define CONFIG_SYS_OR1_PRELIM (0xF0000000 | CONFIG_SYS_OR_TIMING_SDRAM ) /* map 256 MB */ -#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* RPXLITE mem setting */ -#define CONFIG_SYS_BR3_PRELIM 0xFA400001 /* FPGA */ -#define CONFIG_SYS_OR3_PRELIM 0xFFFF8910 - -#define CONFIG_SYS_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */ -#define CONFIG_SYS_OR4_PRELIM 0xFFFE0970 - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 20 - -/* - * Refresh clock Prescalar - */ -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV2 - -/* - * MAMR settings for SDRAM - */ - -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_16X | MAMR_WLFA_16X | MAMR_TLFA_16X) - -/* - * BCSRx - * - * Board Status and Control Registers - * - */ - -#define BCSR0 0xFA400000 -#define BCSR1 0xFA400001 -#define BCSR2 0xFA400002 -#define BCSR3 0xFA400003 - -#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */ -#define BCSR0_ENNVRAM 0x02 /* CS4# Control */ -#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */ -#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */ -#define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */ -#define BCSR0_COLTEST 0x20 -#define BCSR0_ETHLPBK 0x40 -#define BCSR0_ETHEN 0x80 - -#define BCSR1_PCVCTL7 0x01 /* PC Slot B Control */ -#define BCSR1_PCVCTL6 0x02 -#define BCSR1_PCVCTL5 0x04 -#define BCSR1_PCVCTL4 0x08 -#define BCSR1_IPB5SEL 0x10 - -#define BCSR2_ENPA5HDR 0x08 /* USB Control */ -#define BCSR2_ENUSBCLK 0x10 -#define BCSR2_USBPWREN 0x20 -#define BCSR2_USBSPD 0x40 -#define BCSR2_USBSUSP 0x80 - -#define BCSR3_BWRTC 0x01 /* Real Time Clock Battery */ -#define BCSR3_BWNVR 0x02 /* NVRAM Battery */ -#define BCSR3_RDY_BSY 0x04 /* Flash Operation */ -#define BCSR3_RPXL 0x08 /* Reserved (reads back '1') */ -#define BCSR3_D27 0x10 /* Dip Switch settings */ -#define BCSR3_D26 0x20 -#define BCSR3_D25 0x40 -#define BCSR3_D24 0x80 - -#endif /* __CONFIG_H */ diff --git a/include/pcmcia.h b/include/pcmcia.h index 952a67c17c..b0f6b92404 100644 --- a/include/pcmcia.h +++ b/include/pcmcia.h @@ -21,10 +21,7 @@ #if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) - /* The RPX series use SLOT_B */ -#if defined(CONFIG_RPXLITE) -# define CONFIG_PCMCIA_SLOT_B -#elif defined(CONFIG_FADS) /* The FADS series are a mess */ +#if defined(CONFIG_FADS) /* The FADS series are a mess */ # if defined(CONFIG_MPC86x) || defined(CONFIG_MPC821) # define CONFIG_PCMCIA_SLOT_A # else diff --git a/post/cpu/mpc8xx/ether.c b/post/cpu/mpc8xx/ether.c index d12250018a..7dce6a0d24 100644 --- a/post/cpu/mpc8xx/ether.c +++ b/post/cpu/mpc8xx/ether.c @@ -365,10 +365,6 @@ static void scc_init (int scc_index) immr->im_cpm.cp_scc[scc_index].scc_psmr = SCC_PSMR_ENCRC | SCC_PSMR_NIB22 | SCC_PSMR_LPB; -#ifdef CONFIG_RPXLITE - *((uchar *) BCSR0) |= BCSR0_ETHEN; -#endif - /* * Set the ENT/ENR bits in the GSMR Low -- Enable Transmit/Receive */ diff --git a/post/cpu/mpc8xx/uart.c b/post/cpu/mpc8xx/uart.c index 5214c71b08..b3cb1923db 100644 --- a/post/cpu/mpc8xx/uart.c +++ b/post/cpu/mpc8xx/uart.c @@ -106,11 +106,6 @@ static void smc_init (int smc_index) ~(smc_index == 1 ? BCSR1_RS232EN_1 : BCSR1_RS232EN_2); #endif -#if defined(CONFIG_RPXLITE) - /* Enable Monitor Port Transceiver */ - *((uchar *) BCSR0) |= BCSR0_ENMONXCVR; -#endif - /* Set the physical address of the host memory buffers in * the buffer descriptors. */ -- cgit v1.2.1