summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* arm: rmobile: koelsch: Add CONFIG_SCIF_USE_EXT_CLKNobuhiro Iwamatsu2014-10-091-0/+1
| | | | | | | SCIF of koelsch use external clock mode. This enables external clock mode on koelsch board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
* arm: rmobile: lager: Add CONFIG_SCIF_USE_EXT_CLKNobuhiro Iwamatsu2014-10-091-0/+1
| | | | | | | SCIF of lager use external clock mode. This enables external clock mode on lager board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
* arm: rmobile: lager: Fix value of CONFIG_SH_SCIF_CLK_FREQNobuhiro Iwamatsu2014-10-091-1/+1
| | | | | | | The clock of SCIF (serial port) of lager is supplied from External Clock. And value of clock is 14.7456MHz. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
* Merge remote-tracking branch 'u-boot-imx/master'Albert ARIBAUD2014-10-0812-55/+396
|\ | | | | | | | | | | | | The single file conflict below is actually trivial. Conflicts: board/boundary/nitrogen6x/nitrogen6x.c
| * nitrogen6x: config: enable EXT4 filesystemKevin Mihelich2014-10-061-0/+2
| | | | | | | | | | | | | | Support reading/writing ext4 partitions. Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * nitrogen6x: config: enable Android fastbootEric Nelson2014-10-061-0/+5
| | | | | | | | | | | | | | | | | | | | Enable 'fastboot' command. This is currently enabled but not yet functional. Including it in the configuration will ease further testing and development as discussed on the mailing list. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * nitrogen6x: config: add gpio commandEric Nelson2014-10-061-0/+1
| | | | | | | | | | | | | | Enable the 'gpio' command to allow reading and toggling of GPIO pins. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * nitrogen6x: config: disable logoEric Nelson2014-10-061-1/+0
| | | | | | | | | | | | | | | | Some users (QNX and Windows CE users in particular) have asked to disable the Penguin shown on the display at boot time. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * nitrogen6x: config: allow more bootargs parametersTroy Kisky2014-10-061-1/+1
| | | | | | | | | | | | | | | | | | Increase the maximum number of arguments allowed by the Hush parser. This prevents errors when users or scripts aren't quoting parameters when setting the "bootargs" variable et al. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * nitrogen6x: config: enable "i2c edid"Eric Nelson2014-10-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Enable the "i2c edid" command to query data from an attached HDMI monitor. Usage is typically this: U-Boot > i2c dev 1 U-Boot > i2c edid 0x50 ... Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * nitrogen6x: config: add CONFIG_CMD_MEMTESTEric Nelson2014-10-061-0/+1
| | | | | | | | | | | | Enable the 'mtest' command on Nitrogen6x and SABRE Lite boards. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * nitrogen6x: config: enable USB keyboard supportEric Nelson2014-10-061-0/+2
| | | | | | | | | | | | Enable the use of USB keyboards on SABRE Lite and Nitrogen6x boards. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * nitrogen6x: config: expose SATA, then MMC over USBEric Nelson2014-10-061-1/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | If no boot script was found, expose internal storage over the USB mass storage gadget to allow easy programming. This is especially useful when SD cards are inaccessible or when loading SATA drives. More details are available in this blog post: http://boundarydevices.com/u-boot-usb-mass-storage-gadget/ Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * nitrogen6x: config: add initrd_highEric Nelson2014-10-061-0/+1
| | | | | | | | | | | | Support RAM disks by setting initrd_high. See commit 7e9603e Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * nitrogen6x: config: use FS_GENERIC load commandKevin Mihelich2014-10-061-12/+8
| | | | | | | | | | | | | | Remove the individual attempts to load using ext2 and fat, replace with the generic load command supporting available filesystem types. Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
| * nitrogen6x: config: allow boot to USB stickDiego Rondini2014-10-061-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables boot to USB storage devices by expanding on the list of boot devices. Because the USB startup currently takes a long time, it places USB at the end of the list of supported devices. You can over-ride the boot order using the bootdevs environment variable. For instance, this will make USB the first (highest priority) device: U-Boot > setenv bootdevs usb mmc sata U-Boot > saveenv Signed-off-by: Diego Rondini <diego.rondini@kynetics.it> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * nitrogen6x: config: add USB Mass Storage (ums) supportEric Nelson2014-10-061-0/+13
| | | | | | | | | | | | | | | | | | | | Add support for the USB mass storage to enable access to on-board storage (especially eMMC and SATA). Details at: http://boundarydevices.com/u-boot-usb-mass-storage-gadget/ Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * imx6: add Bachmann OT1200 boardChristian Gmeiner2014-10-061-0/+197
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the OT1200 series of devices. Following components are used in u-boot: + ethernet + i2c + emmc + gpio For more details see README. Changes v1 > v2 - make use of enable_cspi_clock(..) - fix usage of OUTPUT_40OHM define - added README Changes v2 > v3 - improve spelling in README - added own copy of mx6q_4x_mt41j128.cfg Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
| * arm: m53evk: Zap superfluous tab in envMarek Vasut2014-10-061-3/+3
| | | | | | | | | | | | | | Remove this tab from env, since it's useless, just use spaces. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| * arm: m28evk: Zap superfluous tab in envMarek Vasut2014-10-061-3/+3
| | | | | | | | | | | | | | Remove this tab from env, since it's useless, just use spaces. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| * mx6sxsabresd: Fix PCI reset and power GPIO assignmentsFabio Estevam2014-10-061-2/+2
| | | | | | | | | | | | | | | | PERST_GPIO and POWER_GPIO are currently swapped. Fix the GPIO assignments as per the board schematics. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * wandboard: Select CONFIG_CMD_FUSEFabio Estevam2014-10-011-0/+5
| | | | | | | | | | | | Select CONFIG_CMD_FUSE so that the fuse API commands can be used. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * imx: mx6dlarm2: Add support for i.MX6Q/DL arm2 LPDDR2 boardsYe.Li2014-09-301-5/+0
| | | | | | | | | | | | | | | | Update the ddr scripts for LPDDR2 and add two build configs for LPDDR2 arm2 board. Since the LPDDR2 arm2 board has different DDR size, use CONFIG_DDR_MB in defconfig to replace the PHYS_SDRAM_SIZE. Signed-off-by: Ye.Li <B37916@freescale.com>
| * imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 boardYe.Li2014-09-301-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the i.MX6DL arm2 board support. The i.MX6DL ARM2 shared the same board with i.MX6Q ARM2 board since the i.MX6DL is pin-pin compatible with i.MX6Q. The patch also support the DDR 32-BIT mode option. Please define CONFIG_DDR_32BIT in the board configure file to enable DDR 32-BIT mode.But due to the board design, it's 64bit DDR buswidth physically, so, if you CONFIG_DDR_32BIT, the DDR memory size will be half of it. Signed-off-by: Ye.Li <B37916@freescale.com>
| * arm: m53evk: Enable FS_GENERICMarek Vasut2014-09-291-2/+3
| | | | | | | | | | | | | | | | Enable the CONFIG_CMD_FS_GENERIC on m53evk to avoid per-fs specific commands and tweak the environment to cater for this new option. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| * arm: m28evk: Enable FS_GENERICMarek Vasut2014-09-291-2/+3
| | | | | | | | | | | | | | | | Enable the CONFIG_CMD_FS_GENERIC on m28evk to avoid per-fs specific commands and tweak the environment to cater for this new option. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| * arm: m53evk: Test if bootscript exists before loading itMarek Vasut2014-09-291-0/+2
| | | | | | | | | | | | | | | | Make sure the boot.scr exists on the card before loading it from the card to avoid annoying message on the console. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| * arm: m28evk: Test if bootscript exists before loading itMarek Vasut2014-09-291-0/+2
| | | | | | | | | | | | | | | | Make sure the boot.scr exists on the card before loading it from the card to avoid annoying message on the console. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| * imx: mx6qarm2: Change the mmcroot and mmcpart env valueYe.Li2014-09-291-2/+2
| | | | | | | | | | | | | | 1. Set the image load partition to the first FAT partition. 2. Set the kernel rootfs partition to the second partition. Signed-off-by: Ye.Li <B37916@freescale.com>
| * imx: mx6qarm2: Add the kernel FDT Loading supportYe.Li2014-09-291-3/+38
| | | | | | | | | | | | | | To support loading FDT file for kernel, add the fdt address, file and loading script to arm2 board default environment. Signed-off-by: Ye.Li <B37916@freescale.com>
| * mx25pdk: Add generic board supportFabio Estevam2014-09-221-0/+1
| | | | | | | | | | | | | | Let's enable CONFIG_SYS_GENERIC_BOARD in order to get rid of warnings related to generic board support is not in place. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx25pdk: Fix CONFIG_SYS_FSL_ESDHC_ADDRFabio Estevam2014-09-221-1/+1
| | | | | | | | | | | | We should pass the MMC1 base address into CONFIG_SYS_FSL_ESDHC_ADDR. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * imx: nitrogen6x: Make use of both uSD and SD slots to load script or kernel ↵Guillaume GARDET2014-09-221-11/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | on Sabrelite board Sabrelite board has two solts: 0 is SD3 (bottom) slot and 1 is uSD4 (top) slot. This patch makes use of both slots instead of only one. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Stefano Babic <sbabic@denx.de> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Reviewed-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Eric Nelson <eric.nelson@boundarydevices.com> Reviewed-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * Merge branch 'master' of git://git.denx.de/u-boot-armStefano Babic2014-09-2240-72/+2367
| |\
| * | mx51evk: Add generic board supportFabio Estevam2014-09-221-0/+1
| | | | | | | | | | | | | | | | | | | | | Let's enable CONFIG_SYS_GENERIC_BOARD in order to get rid of warnings related to generic board not being supported. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | mx51evk: Fix CONFIG_SYS_FSL_ESDHC_ADDRFabio Estevam2014-09-221-1/+1
| | | | | | | | | | | | | | | | | | We should pass the SDHC1 base address into CONFIG_SYS_FSL_ESDHC_ADDR. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | cm_fx6: Remove CONFIG_NETMASKFabio Estevam2014-09-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | We should not hardcode CONFIG_NETMASK in the config file. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
| * | Merge branch 'master' of git://git.denx.de/u-boot-armStefano Babic2014-09-161-3/+3
| |\ \
| * | | imx:mx6slevk: change CONFIG_SYS_FSL_ESDHC_ADDRPeng Fan2014-09-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Define CONFIG_SYS_FSL_ESDHC_ADDR using USDHC2_BASE_ADDR which is used in board_mmc_init. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * | | imx:mx6qarm2: change CONFIG_SYS_FSL_ESDHC_ADDRPeng Fan2014-09-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define CONFIG_SYS_FSL_ESDHC_ADDR using USDHC4_BASE_ADDR. USDHC3 and USDHC4 are both initialized in board_mmc_init. There is no restriction on USDHC3 addr or USDHC4 addr should be assigned to CONFIG_SYS_FSL_ESDHC_ADDR. So, just choose USDHC4_BASE_ADDR to avoid errors when fsl_esdhc_mmc_init is invoked. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * | | imx:mx6sxsabresd: change CONFIG_SYS_FSL_ESDHC_ADDRPeng Fan2014-09-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define CONFIG_SYS_FSL_ESDHC_ADDR using USDHC4_BASE_ADDR which is used in board_mmc_init. If board_mmc_init failed, cpu_mmc_init->fsl_esdhc_mmc_init will use CONFIG_SYS_FSL_ESDHC_ADDR to initialize sdhc. So set this macro to correct value. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * | | arm: vf610: add NAND support for vf610twrStefan Agner2014-09-161-1/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds NAND support for the Vybrid tower system (TWR-VF65GS10) provided by the vf610_nfc driver. Full 16-Bit bus width is supported. Also an aditional config vf610twr_nand is introduced which gets the environment from NAND. However, booting U-Boot from NAND is not yet possible due to missing boot configuration block (BCB). Signed-off-by: Stefan Agner <stefan@agner.ch>
* | | | Merge branch 'u-boot-marvell/master' into 'u-boot-arm/master'Albert ARIBAUD2014-10-072-6/+44
|\ \ \ \
| * | | | lsxl: convert to generic board and fix typoMichael Walle2014-10-061-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Besides converting the LS-XHL and LS-CHLv2 to generic board, fix a typo which accidentally reverted the bootsource to 'hdd' although the default bootsource should be 'legacy'. Cc: Tom Rini <trini@ti.com> Cc: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * | | | ARM: sheevaplug: add HUSH parserDrEagle2014-10-011-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add HUSH command parser Signed-off-by: Gerald Kerma <drEagle@doukki.net> Changes in v1: - add HUSH command parser Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * | | | ARM: sheevaplug: redefine MTDPARTSDrEagle2014-10-011-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch redefine MTDPARTS Signed-off-by: Gerald Kerma <drEagle@doukki.net> Changes in v1: - redefine MTDPARTS Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * | | | ARM: sheevaplug: add MTD defaultsDrEagle2014-10-011-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add MTDIDS and MTDPARTS defaults settings to sheevaplug Signed-off-by: Gerald Kerma <drEagle@doukki.net> Changes in v1: - add MTDIDS and MTDPARTS default to sheevaplug Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * | | | ARM: sheevaplug: add MVSATA driverDrEagle2014-10-011-1/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add MVSATA driver to sheevaplug Signed-off-by: Gerald Kerma <drEagle@doukki.net> Changes in v1: - add MVSATA driver to sheevaplug - enable ext4 FS support Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * | | | ARM: sheevaplug: change env locationDrEagle2014-10-011-2/+2
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch move the environment offset in sheevaplug. The size of the u-boot binary is become too big. Fix saving environments was result of corrupting the u-boot. Signed-off-by: Gerald Kerma <drEagle@doukki.net> Changes in v2: - patch description Changes in v1: - fix sheevaplug environment offset Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* | | | ARM: UniPhier: add UniPhier SoC support codeMasahiro Yamada2014-10-054-0/+447
| | | | | | | | | | | | | | | | | | | | | | | | These are used by Panasonic UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
OpenPOWER on IntegriCloud