summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
...
| * Bring in __aligned_u64 and friends to linux/types.hSimon Glass2015-08-051-1/+5
| | | | | | | | | | | | | | | | These will be used for efi.h both for U-Boot running as an EFI application and as a payload. They come from Linux 4.1. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * elf: Add a few definitions for 64-bit relocationSimon Glass2015-08-051-0/+26
| | | | | | | | | | | | | | Provide the types necessary to relocate 64-bit images. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: bayleybay: Configure PCI IRQBin Meng2015-08-051-0/+1
| | | | | | | | | | | | | | | | Add PCI IRQ routing information in the board device tree and enable writing PIRQ routing table and MP table. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: Add Intel Bayley Bay board supportBin Meng2015-08-051-0/+45
| | | | | | | | | | | | | | | | Intel Bayley Bay board is a BayTrail based board. Add this board with existing baytrail fsp support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: minnowmax: Remove smsc47x superio codesBin Meng2015-08-051-2/+0
| | | | | | | | | | | | | | | | | | On Intel BayTrail SoC, there is a legacy UART (I/O 0x3f8) integrated into the SoC which is enabled by the FSP. Remove the smsc47x superio initialization codes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | sunxi: MUSB gadget config provisions, with fastboot and USB mass storage supportPaul Kocialkowski2015-08-051-0/+30
| | | | | | | | | | | | | | This adds some config options to the sunxi-common config to enable the USB download gadget and the fastboot and USB mass storage functions. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* | sunxi: config update to stick with Kconfig changesPaul Kocialkowski2015-08-051-3/+2
| | | | | | | | | | | | | | Now that some things were updated in Kconfig, they should be reflected on the sunxi-common config too. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* | usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSBPaul Kocialkowski2015-08-0530-112/+112
|/ | | | | | | | | USB-related options are usually prefixed with CONFIG_USB and platform-specific adaptation for the MUSB controller already have a CONFIG_USB_MUSB prefix, so this switches all MUSB-related options to a CONFIG_USB_MUSB prefix, for consistency. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-08-0414-101/+401
|\
| * armv8/ls2085ardb: Add USB support for ls2085ardbNikhil Badola2015-08-031-0/+13
| | | | | | | | | | | | | | Add USB XHCI support for ls2085rdb platform Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv8/ls2085aqds: Add USB support for ls2085aqdsNikhil Badola2015-08-031-0/+13
| | | | | | | | | | | | | | Add USB XHCI support for ls2085qds platform Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * drivers/ddr/fsl: Adjust bstopre valueYork Sun2015-08-031-1/+1
| | | | | | | | | | | | | | | | | | By default the bstopre value has been set to 0x100, used to be 1/4 value of refint. Modern DDR has increased the refresh time. Adjust to 1/4 of refresh interval dynamically. Individual board can still override this value in board ddr file, or to use auto-precharge. Signed-off-by: York Sun <yorksun@freescale.com>
| * drivers/pci: Add function to find an extended capabilityMinghuan Lian2015-08-031-0/+41
| | | | | | | | | | | | | | | | | | | | PCIe extends device's configuration space to 4k and provides extended capability. The patch adds function to find them. The code is ported from Linux PCIe driver. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * drivers/fsl-mc: flib changes for mc 8.0.0Prabhakar Kushwaha2015-08-036-92/+310
| | | | | | | | | | | | | | | | | | MC firware version 8.0.0 contains new command flags. This patch contains modifications in FLIB files to support the new command flags. Signed-off-by: Itai Katz <itai.katz@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * drivers/crypto/fsl: enable raw data instead of von Neumann dataAlex Porosanu2015-08-031-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | The sampling of the oscillator can be done in multiple modes for generating the entropy value. By default, this is set to von Neumann. This patch changes the sampling to raw data, since it has been discovered that the generated entropy has a better 'quality'. Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> Acked-by: Ruchika Gupta<ruchika.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * drivers/crypto/fsl: change starting entropy delay valueAlex Porosanu2015-08-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The entropy delay (the length in system clocks of each entropy sample) for the RNG4 block of CAAM is dependent on the frequency of the SoC. By elaborate methods, it has been determined that a good starting value for all platforms integrating the CAAM IP is 3200. Using a higher value has additional benefit of speeding up the process of instantiating the RNG, since the entropy delay will be increased and instantiation of the RNG state handles will be reattempted by the driver. If the starting value is low, for certain platforms, this can lead to a quite lengthy process. This patch changes the starting value of the length of the entropy sample to 3200 system clocks. In addition to this change, the attempted entropy delay values are now printed on the console upon initialization of the RNG block. Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> Acked-by: Ruchika Gupta<ruchika.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * drivers/crypto/fsl: disable RNG oscillator maximum frequency checkAlex Porosanu2015-08-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The rtfrqmax & rtfrqmin set the bounds of the expected frequency of the oscillator, when SEC runs at its maximum frequency. For certain platforms (f.i. T2080), the oscillator is very fast and thus if the SEC runs at a lower than normal frequency, the ring oscillator is incorrectly detected as being out of bounds. This patch effectively disables the maximum frequency check, by setting a high enough maximum allowable frequency for the oscillator. The reasoning behind this is that usually a broken oscillator will run too slow (i.e. not run at all) rather than run too fast. Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> Acked-by: Ruchika Gupta<ruchika.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv7/ls1021a/etsec: Enable Tx Data and TxBD snoopingAlison Wang2015-08-031-4/+0
| | | | | | | | | | | | | | | | | | To improve eTSEC performance on LS1021A Rev2.0, snooping of all transmit frames from memory and all transmit BD memory accesses in enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv7/ls1021atwr: added deep sleep support in ubootTang Yuantian2015-08-031-1/+10
| | | | | | | | | | | | Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Acked-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv7/lS1021atwr: Enable bootscript for secure bootgaurav rana2015-08-031-0/+1
| | | | | | | | | | | | | | | | Enable bootscript support in secure boot for establishing chain of trust on LS1021atwr. Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv7/ls1021a: Reserve secure code into RAM instead of OCRAMZhuoyu Zhang2015-08-032-2/+0
| | | | | | | | | | | | | | | | | | For ls1021a, Reserve secure code in to memory in case OCRAM is needed by other usage. Signed-off-by: Zhuoyu Zhang <Zhuoyu.Zhang@freescale.com> Acked-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | configs: ti_armv7_keystone2: replace addr_uboot with loadaddrVitaly Andrianov2015-08-031-3/+3
|/ | | | | | | | | This patch replaces not existing addr_uboot environment variable by loadaddr at get_uboot_net and burn_uboot_xxx commands. Otherwise these commands are broken. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Acked-by: Nishanth Menon <nm@ti.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-08-0226-148/+539
|\
| * imx: mx6ul_14x14_evk add basic board supportPeng Fan2015-08-021-0/+227
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Add USDHC, I2C, UART, 74LV, USB, QSPI support. 2. Support SPL 3. CONFIG_MX6UL_14X14_EVK_EMMC_REWORK is introduced, this board default supports sd for usdhc2, but can do hardware rework to make usdhc2 support emmc. Boot Log: U-Boot SPL 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59) reading u-boot.img reading u-boot.img U-Boot 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C)CPU: Thermal invalid data, fuse: 0x0 - invalid sensor device Reset cause: POR Board: MX6UL 14x14 EVK I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * imx: imx6_spl add mx6ul supportPeng Fan2015-08-021-1/+1
| | | | | | | | | | | | | | i.MX6UL's DRAM space starts from 0x80000000, same to i.MX6SX, so use same address with i.MX6SX. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * mx6_common: Fix LOADADDR and SYS_TEXT_BASE for i.MX6ULPeng Fan2015-08-021-1/+1
| | | | | | | | | | | | | | DRAM space starts from 0x80000000 for i.MX6UL, so need to fix LOADADDR, SYS_TEXT_BASE. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * imx: mx6ul remove errata for i.MX6ULPeng Fan2015-08-021-1/+3
| | | | | | | | | | | | | | | | Since i.MX6UL use A7 core, but not A9 core, we do not need the erratas for i.MX6UL. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * sf: kconfig: add kconfig options for spi flashesNikita Kiryanov2015-08-021-8/+0
| | | | | | | | | | | | | | | | | | | | Add kconfig options for various SPI flashes and use them in cm-fx6 defconfig. Cc: Jagan Teki <jteki@openedev.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * usb: kconfig: usb keyboard kconfigNikita Kiryanov2015-08-021-2/+0
| | | | | | | | | | | | | | | | | | | | Add Kconfig options for USB keyboard and use them for cm-fx6. Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * arm: mx6: usb: kconfig: add USB_EHCI_MX6 kconfig optionNikita Kiryanov2015-08-021-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | Add USB_EHCI_MX6 option to menuconfig and use it when migrating cm-fx6 usb config to defconfig. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * arm: mx6: cm-fx6: move CMD configs to defconfigNikita Kiryanov2015-08-021-3/+0
| | | | | | | | | | | | | | | | | | | | Move CONFIG_CMD_* options that can be selected in menuconfig to cm-fx6 defconfig. Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * arm: mx6: cm-fx6: make it possible to not init displayNikita Kiryanov2015-08-021-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement a cm-fx6 specific board_video_skip() to provide the option to not initialize the display. The new function does not init display if the environment variable "panel" is not defined, or if it is set to an unsupported value. Collateral changes: - Don't use the global displays array (it's CONFIG_IMX_VIDEO_SKIP specific). - Don't use detect_hdmi(), since env controlled init makes it unnecessary. Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
| * imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board supportPeng Fan2015-08-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Add DDR script for mx6qpsabreauto board. 2. On CPU3 board, enet RGMII tx clock is from internal PLL. Set the GPR5[9] and init the enet pll output to 125Mhz. 3. On CPU3 board, SW1ABC=VDDSOC_IN, SW2=VDDARM_IN. Build target: mx6qpsabreauto_config Boot Log: U-Boot 2015.07-rc2-00071-gfd985ff (Jun 29 2015 - 22:10:55 +0800) CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C) at 34C Reset cause: POR Board: MX6Q-Sabreauto revA I2C: ready DRAM: 2 GiB PMIC: PFUZE100 ID=0x10 Flash: 32 MiB NAND: 0 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 Note: In this patch, we still add a new config mx6qpsabreauto_config, since SPL is not supported now, and IMX_CONFIG is needed at build time, so add this config. Future, when SPL is converted, this config can be removed. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
| * imx: mx6sabresd/sabreauto runtime setting fdt_filePeng Fan2015-08-023-12/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | Detect the SOC and board variant at runtime and change the dtb name, but not hardcoding the fdt_file env variable. Take the following patch as a reference. Íd58699b157df75f1aa0b363ea9c21add21a0c "mx6cuboxi: Load the correct 'fdtfile' variable" Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * cgtqmx6eval: Use standard boot scriptOtavio Salvador2015-07-261-28/+66
| | | | | | | | | | | | | | Use more standard boot scripts and also add the capability of booting via NFS. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * cgtqmx6eval: Add SATA supportOtavio Salvador2015-07-261-0/+9
| | | | | | | | | | | | Add SATA support. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * cgtqmx6eval: Add splash screen supportOtavio Salvador2015-07-261-0/+20
| | | | | | | | | | | | Add LVDS and HDMI support. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * cgtqmx6eval: Add USB supportOtavio Salvador2015-07-261-0/+15
| | | | | | | | | | | | Add USB support. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * cgtqmx6eval: Add PMIC supportOtavio Salvador2015-07-261-0/+13
| | | | | | | | | | | | | | | | cgtqmx6eval has a PFUZE100 FSL PMIC connected to I2C2. Add support for it. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * cgtqmx6eval: Add thermal supportOtavio Salvador2015-07-261-0/+8
| | | | | | | | | | | | | | | | Add thermal support so that we can see the following message on boot: CPU: Industrial temperature grade (-40C to 105C) at 33C Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * cgtqmx6eval: Use the default CONFIG_SYS_PBSIZEOtavio Salvador2015-07-261-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into the console and hitting enter afterwards, causes a hang in the system because CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error message: "Unknown command '' - try 'help'". Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve this problem. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * cgtqmx6eval: Use default promptOtavio Salvador2015-07-261-3/+0
| | | | | | | | | | | | Remove the custom prompt and use the default instead. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * warp: Add MAX77696 supportFabio Estevam2015-07-261-0/+11
| | | | | | | | | | | | | | | | Warp has a MAX77696 PMIC connected via I2C1 bus. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * power: pmic: Add support for MAX77696 PMICFabio Estevam2015-07-261-0/+60
| | | | | | | | | | | | Add support for MAX77696 PMIC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * thermal: Fix commentsFabio Estevam2015-07-261-12/+4
| | | | | | | | | | | | | | | | | | | | It seems that many comments were copied from the I2C uclass, so adjust the comments for the thermal class. Reported-by: Simon Glass <sjg@chromium.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Simon Glass <sjg@chromium.org>
| * arm: mx6: tqma6: Add WRU-IV baseboard for the TQMa6 SoMStefan Roese2015-07-262-0/+73
| | | | | | | | | | | | | | | | | | This patch adds support for the "OHB System AG" baseboard with is equipped with the TQMa6S SoM. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Stefano Babic <sbabic@denx.de>
| * Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2015-07-1721-66/+144
| |\
| * | imx6: standardise OCOTP and fuse config to mx6_commonPeter Robinson2015-07-1016-68/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | According to README.mxc_ocotp the OCOTP is a stanard i.MX6 SoC feature so centralise the config in mx6_common.h so functionality is standard across all boards Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * | Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2015-07-10467-2081/+977
| |\ \
| * | | mx53loco: Use generic 'load' command instead of 'fatload'Guillaume GARDET2015-07-061-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch uses generic 'load' command instead of 'fatload' for 'loadbootscript', 'loadimage' and 'loadfdt' for mx53loco board. This allows to use EXT partition instead of FAT, while keeping FAT compatibility. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Jason Liu <r64343@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Jason Liu <r64343@freescale.com>
OpenPOWER on IntegriCloud