summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* xpedite1k: Move to X-ES vendor directoryPeter Tyser2009-07-241-1/+1
| | | | | | | | | | The XPedite1000 is an X-ES product thus it can be put in board/xes along with other X-ES boards. Along with the move, the board was renamed to XPedite1000 from XPedite1K to fit X-ES's standard naming convention. Maintainership was also transfered to Peter Tyser. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* xpedite1k: Sync checkboard() with other X-ES boardsPeter Tyser2009-07-241-0/+1
| | | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* xpedite1k: Sync up board config options with other X-ES boardsPeter Tyser2009-07-241-19/+19
| | | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* xpedite1k: Sync organization of board config with other X-ES boardsPeter Tyser2009-07-241-74/+85
| | | | | | | This change should have no functional effect Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* xpedite1k: Sync up commands and environment with other X-ES boardsPeter Tyser2009-07-241-12/+110
| | | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* xpedite1k: Disable unused ethernet port 1Peter Tyser2009-07-241-3/+1
| | | | | | | | The XPedite1000 only has 2 available ethernet ports: ppc_4xx_eth2 (EMAC2) and ppc_4xx_eth3 (EMAC3) Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* xpedite1k: Store environment in flashPeter Tyser2009-07-241-4/+9
| | | | | | | | | Previously an I2C EEPROM was used. The EEPROM had size, reliability, and access issues which are resolved by storing the environment in flash. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* xpedite1k: Add support for optional flashesPeter Tyser2009-07-241-3/+4
| | | | | | | | | | | | The XPedite1000 can be built with 4 total flashes: - 512KB AMD socketed - 16MB Intel soldered - 2 x 32MB AMD MirrorBit flashes Add support for the optional 2 32MB CFI-compliant AMD flashes Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* xpedite1k: Cleanup coding stylePeter Tyser2009-07-241-125/+91
| | | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* xpedite1k: Remove support for reading MACs from EEPROMPeter Tyser2009-07-241-1/+0
| | | | | | | | | | | | By default, the XPedite1000 comes installed with xMon, a proprietary bootloader. xMon stores its MAC address in an onboard EEPROM. Rather than requiring a non-standard location in the EEPROM to be reserved for MAC addresses, store the MAC addresses in U-Boot's standard environment. A U-Boot application or OS application can be used to migrate xMon MAC addresses to U-Boot's environment if necessary. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* xpedite1k: Remove CONFIG_SYS_DRAM_TEST supportPeter Tyser2009-07-241-1/+0
| | | | | | | POST or command line tests provide similar functionality Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* xpedite1k: Use standard CFI flash driverPeter Tyser2009-07-241-3/+7
| | | | | | | | | | | | Using the CFI flash driver will allow write access to the 16MB Intel StrataFlash present on the XPedite1000. The 512KB socketed (non CFI-compliant flash) will no longer be writable. The mapping of the 16MB Strata flash was moved to 0xff000000 and the 512KB AMD socketed flash was moved to 0xfe000000. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add DL-Vision 405EP board supportDirk Eibach2009-07-241-0/+225
| | | | | | | Board support for the Guntermann & Drunck DL-Vision. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
* Coding Style cleanup; update CHANGELOG.Wolfgang Denk2009-07-232-8/+8
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* update config for mvBC-P (MPC5200)André Schwarz2009-07-231-2/+12
| | | | | | | This patch adds I2C support for mvBC-P and defines flash layout matching the shipped product. Signed-off-by: André Schwarz <andre.schwarz@matrix-vision.de>
* Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk2009-07-2311-30/+46
|\
| * fec_mxc: driver for FEC ethernet controller on i.MX27Ilya Yanok2009-07-221-0/+1
| | | | | | | | | | Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * Convert SMC911X Ethernet driver to CONFIG_NET_MULTI APIBen Warren2009-07-2210-28/+38
| | | | | | | | | | | | | | | | | | | | | | | | All in-tree boards that use this controller have CONFIG_NET_MULTI added Also: - changed CONFIG_DRIVER_SMC911X* to CONFIG_SMC911X* - cleaned up line lengths - modified all boards that override weak function in this driver - added Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Tested-by: Mike Frysinger <vapier@gentoo.org>
| * Add DNS supportRobin Getz2009-07-221-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On 04 Oct 2008 Pieter posted a dns implementation for U-Boot. http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg10216.html > > DNS can be enabled by setting CFG_CMD_DNS. After performing a query, > the serverip environment var is updated. > > Probably there are some cosmetic issues with the patch. Unfortunatly I > do not have the time to correct these. So if anybody else likes DNS > support in U-Boot and has the time, feel free to patch it in the main tree. Here it is again - slightly modified & smaller: - update to 2009-06 (Pieter's patch was for U-Boot 1.2.0) - README.dns is added - syntax is changed (now takes a third option, the env var to store the result in) - add a random port() function in net.c - sort Makefile in ./net/Makefile - dns just returns unless a env var is given - run through checkpatch, and clean up style issues - remove packet from stack - cleaned up some comments - failure returns much faster (if server responds, don't wait for timeout) - use built in functions (memcpy) rather than byte copy. Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * net: rename NetRxPkt to NetRxPacketMike Frysinger2009-07-221-2/+2
| | | | | | | | | | | | | | | | The net code is mostly consistent in using 'Packet' rather than 'Pkt', so rename the minor detractor to follow suite. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | zlib: updated to v.1.2.3Giuseppe CONDORELLI2009-07-231-227/+491
|/ | | | | | | | | | | | | | | This patch updates zlib to the latest stable version. Only relevant zlib parts were ported to u-boot tree, as was done for the previously used version of zlib (0.95). New zlib gives faster inflate performance and other improvements, see www.zlib.net Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com> Reviewed-by: Angelo Castello <angelo.castello@st.com> Edited commit message Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-07-236-0/+648
|\
| * arm, kirkwood: added kw_gpio_set_valid() in gpio.hHeiko Schocher2009-07-231-0/+2
| | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| * Kirkwood: add Marvell Kirkwood gpio driverDieter Kiermaier2009-07-231-0/+51
| | | | | | | | | | | | Signed-off-by: Dieter Kiermaier <dk-arm-linux@gmx.de> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Tested-by: Heiko Schocher <hs@denx.de>
| * arm, kirkwood: added KW_TWSI_BASE in kirkwood.hHeiko Schocher2009-07-231-0/+1
| | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| * Marvell RD6281A Board supportPrafulla Wadaskar2009-07-231-0/+198
| | | | | | | | | | | | | | | | | | | | | | | | This is Marvell's 88F6281_A0 based reference design board This patch is tested for- 1. Boot from DRAM/NAND flash/NFS 2. File transfer using tftp and loadb 3. NAND flash read/write/erase Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * at91cap9adk: fix #ifdef/#endif pairingWolfgang Denk2009-07-221-1/+1
| | | | | | | | | | | | The #ifdef/#endif pairing in this file was obviously messed up. Signed-off-by: Wolfgang Denk <wd@denx.de>
| * Add unaligned.h for armSimon Kagstrom2009-07-191-0/+18
| | | | | | | | | | | | | | | | | | This patch adds unaligned.h for ARM (needed to build with LZO compression). The file is taken from the linux kernel, but includes u-boot headers instead. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Acked-by: Stefan Roese <sr@denx.de>
| * Marvell MV88F6281GTW_GE Board supportPrafulla Wadaskar2009-07-181-0/+200
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is Marvell's 88F6281_A0 based custom board developed for wireless access point product This patch is tested for- 1. Boot from DRAM/SPI flash/NFS 2. File transfer using tftp and loadb 3. SPI flash read/write/erase 4. Booting Linux kernel and RFS from SPI flash 5. Boot from USB supported Reviewed-by: Ronen Shitrit <rshitrit@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * Marvell Sheevaplug Board supportPrafulla Wadaskar2009-07-181-0/+195
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reference: http://plugcomputer.org/ http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support This patch is tested for- 1. Boot from DRAM/NAND flash 2. File transfer using tftp 3. NAND flash read/write/erase 4. Linux kernel and RFS Boot from NAND 5. Enabled USB PHY init for kernel need 6. Boot from USB supported Note: to boot Kirkwood kernel with USB support, you should add "usb start" in the boot sequence Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-i2cWolfgang Denk2009-07-231-1/+0
|\ \
| * | i2c, mpc83xx: add CONFIG_SYS_I2C_INIT_BOARD for fsl_i2cHeiko Schocher2009-07-211-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the possibility to call a board specific i2c bus reset routine for the fsl_i2c bus driver, and adds this option for the keymile kmeter1 board. The deblock sequence for this board is implemented and tested in the following way: CR = 0x20 (release SDA and SCL pin) CR = 0xa0 (start read) dummy read dummy read if 2. dummy read == 0x00 3. dummy read CR = 0x80 (SDA and SCL now 1 SR = 0x86) CR = 0x00 (Modul reset SR=0x81) CR = 0x80 (SDA and SCL = 1, SR = 0x81) Signed-off-by: Heiko Schocher <hs@denx.de>
* | | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2009-07-2316-25/+60
|\ \ \
| * | | xpedite5370: Enable NAND command supportPeter Tyser2009-07-221-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the MPC8572's eLBC to access 1 GB (or greater) onboard NAND flash via the 'nand' command. Previously, the XPedite5370's NAND chip selects were properly configured, but NAND support was not enabled. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | xes: Increase CONFIG_SYS_BOOTM_LEN to 16MBPeter Tyser2009-07-223-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Increasing CONFIG_SYS_BOOTM_LEN from 8 MB to 16 MB is necessary to support uncompressing images larger than 8 MB when using the bootm command. Note that recent Linux kernels for the 85xx and 86xx map greater than 16MB of memory on bootup, but we use 16MB to maintain compatibility with older Linux kernels for now. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | xpedite5200,5370: Use buffered NOR flash writesPeter Tyser2009-07-222-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buffered writes are possible on the XPedite5200 and XPedite5370 and greatly improve NOR flash write speeds Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | 86xx: Rename ccsr_ddr's sdram_mode_1, sdram_cfg_1 fieldsPeter Tyser2009-07-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename sdram_mode_1 to sdram_mode and sdram_cfg_1 to sdram_cfg to match the 86xx user's manual and other Freescale architectures Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | 85xx: Add pci/pcie E1000 ethernet support for MPC8544DS and MPC8536 boardsRoy Zang2009-07-222-0/+2
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | 85xx: Report which "bank" of NOR flash we are booting from on FSL boardsKumar Gala2009-07-224-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The p2020DS, MPC8536DS, MPC8572DS, MPC8544DS boards are capable of swizzling the upper address bits of the NOR flash we boot out of which creates the concept of "virtual" banks. This is useful in that we can flash a test of image of u-boot and reset to one of the virtual banks while still maintaining a working image in "bank 0". The PIXIS FPGA exposes registers on LBC which we can use to determine which "bank" we are booting out of (as well as setting which bank to boot out of). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | 86xx: Report which "bank" of NOR flash we are booting from on MPC8641HPCNKumar Gala2009-07-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MPC8641HPCN board is capable of swizzling the upper address bit of the NOR flash we boot out of which creates the concept of "virtual" banks. This is useful in that we can flash a test of image of u-boot and reset to one of the virtual banks while still maintaining a working image in "bank 0". The PIXIS FPGA exposes registers on LBC which we can use to determine which "bank" we are booting out of (as well as setting which bank to boot out of). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | 85xx: Bump up the BOOTMAP to 16M on FSL 85xx boardsKumar Gala2009-07-2111-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have always mapped at least 16M in the kernel and we have seen cases with new kernel features that a kernel image needs more than 8M of memory. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | | Refresh LZMA-lib to v4.65Luigi 'Comio' Mantellini2009-07-224-11/+18
| | | | | | | | | | | | | | | | Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
* | | | AT91: factor out ROUND() macroWolfgang Denk2009-07-2211-10/+1
|/ / / | | | | | | | | | | | | | | | | | | | | | A large number of boards (all AT91 based) duplicated the ROUND() macro in their board specific config files. Add the definition to include/common.h and clean up the board config files. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | 83xx, kmeter: fix compile errorHeiko Schocher2009-07-211-1/+0
|/ / | | | | | | | | | | | | | | | | | | CONFIG_SYS_MALLOC_LEN is defined in the board config, and the keymile-common.h, which collects common options used by all keymile-boards. This results in a compile error when compiling the kmeter1 board. So remove this define in the board config file. Signed-off-by: Heiko Schocher <hs@denx.de>
* | powerpc: updates for the keymile boardsHeiko Schocher2009-07-215-18/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - CONFIG_SYS_MAX_I2C_BUS changed to 1 We use only one I2C hardwarecontroller on this boards, so change the CONFIG_SYS_MAX_I2C_BUS to 1. - common: dont print errormsg if second IVM Block lacks. - 82xx, mgcoge: fix double mtdpart entry in environment - 82xx, mgcoge: activate on second Flash the second bank. - common: CONFIG_ENV_SIZE 0x4000 for all keymile boards - common: Change malloc size to 1MByte for all Keymile boards We need a bigger malloc area for the environment support (128k) on some Keymile boards (kmeter1) and the upcoming UBI support. Change it to 1MB for all Keymile boards to be on the save side. Also define CONFIG_SYS_64BIT_VSPRINTF which is needed for UBI/UBIFS support. - Add UBI support to all Keymile boards - change manner of writing "/localbus/ranges" node instead of writting the complete "/localbus/ranges" node before booting Linux, only update the ranges entries which gets dynamical detected (size of flashes). This is needed, because keymile adds in the DTS "/localbus/ranges" node entries, which u-boot must not overwrite/delete. - kmeter, mgcoge: define 2 seperate regions needed for the Intel P30 chips The Intel P30 chip has 2 non-identical chips on one die, so we need to define 2 seperate regions that are scanned by physmap_of independantly. - kmeter1: Add MTD concat support to Keymile boards - 82xx, mgcoge: add "unlock=yes" to default environment - added CONFIG_MTD_DEVICE to get in sync with mainline code Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | Add unaligned.h for armSimon Kagstrom2009-07-201-0/+18
| | | | | | | | | | | | | | | | | | This patch adds unaligned.h for ARM (needed to build with LZO compression). The file is taken from the linux kernel, but includes u-boot headers instead. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Acked-by: Stefan Roese <sr@denx.de>
* | Remove last remanants of unused CONFIG_I2C_CMD_TREEPeter Tyser2009-07-204-4/+0
| | | | | | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk2009-07-204-7/+8
|\ \
| * | Blackfin: bf537-{minotaur,srv1}: do not hardcode CONFIG_ETHADDRMike Frysinger2009-07-182-6/+4
| | | | | | | | | | | | | | | | | | | | | MAC addresses should not be hardcoded in boards to avoid random link level conflicts. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | Blackfin: bf533-stamp: back down SCLK a bitMike Frysinger2009-07-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | While the 1.0 and 1.2 spin of the bf533-stamp boards can handle the higher SCLK speeds just fine, the 1.1 spin cannot due to the bugs introduced with the shortened SDRAM traces. So lower the SCLK speed down to a value that all three can handle. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
OpenPOWER on IntegriCloud