summaryrefslogtreecommitdiffstats
path: root/include/mpc83xx.h
Commit message (Collapse)AuthorAgeFilesLines
* Make Freescale local bus registers available for both 83xx and 85xx.Haiying Wang2008-10-291-85/+0
| | | | | | | | | | | | | - Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it can be shared by both 83xx and 85xx - Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards files which use lbus83xx_t. - Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that 85xx can share them. Signed-off-by: Jason Jin <Jason.Jin@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* mpc83xx: add TSECs' HRCWH masks for MPC837x processorsAnton Vorontsov2008-10-211-0/+2
| | | | | | | We'll use these masks to parse TSEC modes out of HRCWH. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: Fix typo in include/mpc83xx.hNobuhiro Iwamatsu2008-09-241-1/+1
| | | | | | | Fixed typo from CONIFG_MPC837X to CONFIG_MPC837X Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family ↵Nick Spence2008-08-251-0/+7
| | | | | | | | | | devices This patch adds elements to the 83xx sysconf structure and #define values that are used by mpc83xx family devices. Signed-off-by: Nick Spence <nick.spence@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* NAND boot: MPC8313ERDB supportScott Wood2008-08-121-0/+2
| | | | | | | | | Note that with older board revisions, NAND boot may only work after a power-on reset, and not after a warm reset. I don't have a newer board to test on; if you have a board with a 33MHz crystal, please let me know if it works after a warm reset. Signed-off-by: Scott Wood <scottwood@freescale.com>
* fdt: add crypto node handling for MPC8{3, 5}xxE processorsKim Phillips2008-07-141-1/+6
| | | | | | | | Delete the crypto node if not on an E-processor. If on 8360 or 834x family, check rev and up-rev crypto node (to SEC rev. 2.4 property values) if on an 'EA' processor, e.g. MPC8349EA. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.hAnton Vorontsov2008-06-101-233/+1
| | | | | | | | | This patch moves Freescale Localbus defines out of mpc83xx.h, so we could use it on MPC85xx and MPC86xx processors. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Add missing CSCONFIG_BANK_BIT_3 define to mpc83xx.hTor Krill2008-06-101-0/+1
| | | | | Signed-off-by: Tor Krill <tor@excito.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) codeKim Phillips2008-03-281-65/+30
| | | | | | | | | | in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6, 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing and processor ID display. Add REVID_{MAJ,MIN}OR macros to make REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR convenience macros. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: MPC8360E-RDK: rework ddr setup, enable eccAnton Vorontsov2008-03-251-1/+2
| | | | | | | | Current DDR setup easily causes memory corruption, this patch fixes it. Also fix TIMING_CFG0_MRS_CYC definition. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
* mpc8323erdb: Improve the system performanceMichael Barkowski2008-03-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following changes are based on kernel UCC ethernet performance: 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT switch to enable this setting. The following changes are based on the App Note AN3369 and verified to improve memory latency using LMbench: 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting previously. 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on Twr=15ns, and this was already the setting in DDR_MODE) 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on Trp=15ns) 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on Tras=40ns) 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on Trcd=15ns) 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on Trfc=75ns) 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based on Tfaw=50ns) 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based on CL=3 and WL=2). Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: Fix the fatal conflict of mergeDave Liu2008-01-171-7/+3
| | | | | | | | | | | | The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7 will cause the mpc8315erdb board can't boot up. The patch fix that bug, and remove the duplicated #ifdef CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for MPC8313E processor. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: add support for more system clock performance controlsKim Phillips2008-01-161-3/+10
| | | | | | | | | | System registers that are modified are the Arbiter Configuration Register (ACR), the System Priority Control Register (SPCR), and the System Clock Configuration Register (SCCR). Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com> Signed-off by: Joe D'Abbraccio <ljd015@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: Fix the wrong definition of MPC8315EDave Liu2008-01-101-20/+28
| | | | | | | | | According to the latest user manual of MPC8315E, 1) The SVCOD of HRCWL is different than 837x 2) The SCCR has changes Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: Fix the typo in mpc83xx.hDave Liu2008-01-101-4/+4
| | | | | | | | | The SPCR about TSEC priority is wrong. Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com> Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: Add the support of MPC8315E SoCDave Liu2008-01-081-6/+87
| | | | | | | The MPC8315E SoC including e300c3 core and new IP blocks, such as TDM, PCI Express and SATA controller. Signed-off-by: Dave Liu <daveliu@freescale.com>
* mpc83xx: Add the support of MPC837x SoCDave Liu2008-01-081-20/+154
| | | | | | | The MPC837x SoC including e300c4 core and new IP blocks, such as SDHC, PCI Express and SATA controller. Signed-off-by: Dave Liu <daveliu@freescale.com>
* mpc83xx: implement board_add_ram_infoKim Phillips2007-08-161-2/+3
| | | | | | | | | | | | | | | | add board_add_ram_info, to make memory diagnostic output more consistent. u-boot banner output now looks like: DRAM: 256 MB (DDR1, 64-bit, ECC on) and for boards with SDRAM on the local bus, a line such as this is added: SDRAM: 64 MB (local bus) also replaced some magic numbers with their equivalent define names. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Update SCCR programming in cpu_init_f() to support all 83xx processorsTimur Tabi2007-08-101-0/+2
| | | | | | | | | | | | | Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the bitfields for all 83xx processors. The code to update some bitfields was compiled only on some processors. Now, the bitfields are programmed as long as the corresponding CFG_SCCR option is defined in the board header file. This means that the board header file should not define any CFG_SCCR macros for bitfields that don't exist on that processor, otherwise the SCCR will be programmed incorrectly. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: Add support for 8360 silicon revision 2.1Lee Nipper2007-08-101-0/+2
| | | | | | | This change adds 8360 silicon revision 2.1 support to u-boot. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Coding stylke cleanup; rebuild CHANGELOGWolfgang Denk2007-06-221-5/+5
|
* [ppc] Fix build breakage for all non-4xx PowerPC variants.Rafal Jaworowski2007-06-221-0/+1
| | | | | - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros - minor 4xx cleanup
* mpc83xx: Add generic PCI setup code.Scott Wood2007-04-231-0/+5
| | | | | | | | Board code can now request the generic setup code rather than having to copy-and-paste it for themselves. Boards should be converted to use this once they're tested with it. Signed-off-by: Scott Wood <scottwood@freescale.com>
* mpc83xx: Add register definitions for MPC831x.Scott Wood2007-04-231-1/+251
| | | | Signed-off-by: Scott Wood <scottwood@freescale.com>
* mpc83xx: Fix config of Arbiter, System Priority, and Clock ModeKumar Gala2007-03-021-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | The config value for: * CFG_ACR_PIPE_DEP * CFG_ACR_RPTCNT * CFG_SPCR_TSEC1EP * CFG_SPCR_TSEC2EP * CFG_SCCR_TSEC1CM * CFG_SCCR_TSEC2CM Were not being used when setting the appropriate register Added: * CFG_SCCR_USBMPHCM * CFG_SCCR_USBDRCM * CFG_SCCR_PCICM * CFG_SCCR_ENCCM To allow full config of the SCCR. Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349 that were just bogus. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDSXie Xiaobo2007-03-021-0/+2
| | | | | | | MPC8360E rev2.0 have new spridr,and PVR value, The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
* mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDSXie Xiaobo2007-03-021-2/+11
| | | | | | | MPC8349E rev3.1 have new spridr,and PVR value, The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM. Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
* mpc83xx: Add support for the MPC8349E-mITX-GPTimur Tabi2007-03-021-0/+41
| | | | | | | | Add support for the MPC8349E-mITX-GP, a stripped-down version of the MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in HRCW is 0) for the ITX and a README for the ITX and the ITX-GP. Signed-off-by: Timur Tabi <timur@freescale.com>
* mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X insteadKumar Gala2007-03-021-7/+7
| | | | | | | | The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all MPC834X class processors. Change the protections from CONFIG_MPC8349 to CONFIG_MPC834X so they are more generic. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* mpc83xx: Add support for the MPC832XEMDS boardDave Liu2007-03-021-2/+19
| | | | | | This patch supports DUART, ETH3/4 and PCI etc. Signed-off-by: Dave Liu <daveliu@freescale.com>
* mpc83xx: streamline the 83xx immr head fileDave Liu2007-03-021-367/+896
| | | | | | | | | | | | | | | | For better format and style, I streamlined the 83xx head files, including immap_83xx.h and mpc83xx.h. In the old head files, 1) duplicated macro definition appear in the both files; 2) the structure of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The macro definition put inside the each structure. So, I cleaned up the structure of QE immr from immap_83xx.h, deleted the duplicated stuff and moved the macro definition to mpc83xx.h, Just like MPC8260. CHANGELOG *streamline the 83xx immr head file Signed-off-by: Dave Liu <daveliu@freescale.com>
* mpc83xx: Add MPC8360EMDS basic board supportDave Liu2006-11-031-12/+90
| | | | | Add support for the Freescale MPC8360EMDS board. Includes DDR, DUART, Local Bus, PCI.
* mpc83xx: Changed to unified mpx83xx names and added common 83xx changesDave Liu2006-11-031-1/+39
| | | | | | | Incorporated the common unified variable names and the changes in preparation for releasing mpc8360 patches. Signed-off-by: Dave Liu <daveliu@freescale.com>
* Added support for TQM834x boards.Marian Balakowicz2005-10-111-33/+58
|
* Fix style issues primarily in 85xx and 83xx boards.Jon Loeliger2005-08-011-7/+6
| | | | | | | | - C++ comments - Trailing white space - Indentation not by TAB - Excessive amount of empty lines - Trailing empty lines
* * Patch by Eran LibertyEran Liberty2005-07-281-0/+289
Add support for the Freescale MPC8349ADS board.
OpenPOWER on IntegriCloud