summaryrefslogtreecommitdiffstats
path: root/include/configs
Commit message (Collapse)AuthorAgeFilesLines
* MIPS: malta: do not pull in target header files in config.hDaniel Schwierzeck2016-01-161-6/+3
| | | | | | | | | config.h is used in target and host code and therefore should not pull in target header files to avoid compile errors. This change is also required for the MIPS header file sync done in follow-up patches. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* Fix GCC format-security errors and convert sprintfs.Ben Whitten2016-01-141-1/+1
| | | | | | | | | | | With format-security errors turned on, GCC picks up the use of sprintf with a format parameter not being a string literal. Simple uses of sprintf are also converted to use strcpy. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Acked-by: Wolfgang Denk <wd@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2016-01-141-1/+2
|\
| * x86: adjust ramdisk load addressMiao Yan2016-01-131-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | By default, ramdisk load address is defined to 02000000 in env string. When loading bzImage to 01000000 (default address), there's a chance that the ramdisk header would be overwritten by the kernel. Thus increase the gap and make ramdisk load at 04000000 by default and also this patch introduces a new configuration item CONFIG_RAMDISK_ADDR for this purpose Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Merge git://www.denx.de/git/u-boot-marvellTom Rini2016-01-145-69/+369
|\ \ | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
| * | mvebu: Support Synology DS414Phil Sutter2016-01-141-0/+162
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the MV78230 based DS414 NAS by Synology. The relevant bits have been extracted from the 'synogpl-5004-armadaxp' package Synology kindly published, garnished with a fair amount of trial-and-error. Sadly, support is far from perfect. The major parts I have failed in are SATA and XHCI support. Details about these and some other things follow: Device Tree ----------- The device tree file armada-xp-synology-ds414.dts has been copied from Linux and enhanced by recent U-Boot specific changes to armada-xp-gp.dts. SATA Support ------------ There is a Marvell 88SX7042 controller attached to PCIe which is supported by Linux's sata_mv driver but sadly not U-Boot's sata_mv. I'm not sure if extending the latter to support PCI devices is worth the effort at all. Porting sata_mv from Linux exceeded my brain's capacities. :( XHCI Support ------------ There is an EtronTech EJ168A XHCI controller attached to PCIe which drives the two rear USB3 ports. After a bit of playing around I managed to get it recognized by xhci-pci, but never was able to access any devices attached to it. Enabling it in ds414 board config shows that it does not respond to commands for whatever reason. The (somewhat) bright side to it is that it is not even supported in Synology's customized U-Boot, but that also means nowhere to steal the relevant bits from. EHCI Support ------------ This seems functional after issuing 'usb start'. At least it detects USB storage devices, and IIRC reading from them was OK. OTOH Linux fails to register the controller if 'usb start' wasn't given before in U-Boot. According to Synology sources, this board seems to support USB device (gadget?) mode. Though I didn't play around with it. PCIe Support ------------ This is fine, but trying to gate the clocks of unused lanes will hang PCI enum. In addition to that, pci_mvebu seems not to support DM_PCI. DDR3 Training ------------- Marvell/Synology uses eight PUPs instead of four. Does not look like this is meant to be customized in mainline U-Boot at all. OTOH I have no idea what a "PUP" actually is. PEX Init -------- Synology uses different values than mainline U-Boot with this patch: pex_max_unit_get returns 2, pex_max_if_get returns 7 and max_serdes_lines is set to 7. Not changing this seems to not have an impact, although I'm not entirely sure it does not cause issues I am not aware of. Static Environment ------------------ This allows to boot stock Synology firmware at least. In order to be a little more flexible when it comes to booting custom kernels, do not only load zImage partition, but also rd.gz into memory. This way it is possible to use about 7MB for kernel with piggyback initramfs. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | mvebu: Introduce kconfig symbols for SoC variantsPhil Sutter2016-01-142-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds intermediate kconfig symbols which select their SoC family. Boards then select them instead of the family symbol directly. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | arm: mvebu: Move SoC selection (A38X vs AXP) into KconfigStefan Roese2016-01-144-16/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Until now, the SoC selection for the ARCH_MVEBU platforms has been done in the config header. Using CONFIG_ARMADA_XP in a non-clear way. As it needed to get selected for AXP and A38x based boards. This patch now changes this to move the SoC selection to Kconfig. And also uses CONFIG_ARCH_MVEBU as a common define for both AXP and A38x. This makes things a bit clearer - especially for new board additions. Additionally the defines CONFIG_SYS_MVEBU_DDR_AXP and CONFIG_SYS_MVEBU_DDR_A38X are replaced with the already available CONFIG_ARMADA_38X and CONFIG_ARMADA_XP. And CONFIG_DDR3 is removed, as its not referenced anywhere. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | arm: mvebu: Make ECC support configurable on Armada XPStefan Roese2016-01-142-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, ECC support is enabled for all Armada XP boards. So the DDR3 driver tries to configure the controller with ECC support, even on boards without ECC. This patch makes this ECC optional which now can be configured on a board-per-board basis. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Phil Sutter <phil@nwl.cc>
| * | arm: mvebu: db-mv784mp-gp: Enable cache commandStefan Roese2016-01-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Th cache command can be useful sometimes. So lets enable it on the AXP eval board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | arm: mvebu: db-mv784mp-gp: Enable common file-system supportStefan Roese2016-01-141-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the common FS options to the Marvell AXP eval board. This includes EXT2, EXT4, FAT and VFAT. And of course the generic FS commands. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | arm: mvebu: db-mv784mp-gp: Switch from IDE to SATA supportStefan Roese2016-01-141-27/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the newly introduced SATA driver for the Marvell AXP with DMA support instead of the PIO-only IDE driver. This increases the transfer speed. And is also more in-line with the Armada 38x ports, which also use a SATA driver (AHCI) and the "sata" U-Boot commands. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | arm: mvebu: Add SolidRun ClearFog Armada 38x initial supportStefan Roese2016-01-141-0/+183
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds basic support for the SolidRun ClearFog Armada 38x based board to mainline U-Boot. Supported interfaces / devices are: - DDR3 - UART - MMC - Ethernet port 0 (connected to dedicated PHY) - I2C The included DT source was taken from Russell King's ftp server: http://www.home.arm.linux.org.uk/~rmk/clearfog/ With only minor modifications, like the addition of some aliases and the "u-boot,dm-pre-reloc" property. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Rabeeh Khoury <rabeeh@solid-run.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | arm: mvebu: Move some defines to common include fileStefan Roese2016-01-143-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves some config options to the mvebu common include file. Making it easier to not forget these defines for new boards. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
| * | net: mvneta: Convert to driver modelStefan Roese2016-01-143-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update this driver to support driver model. As all MVEBU boards using this driver are converted with this patch, the non-driver-model code can be removed completely. This is also the reason why this patch is quite big and includes a) the driver change and b) the platform change. As its not git-bisect save otherwise. With this conversion, some parameters are now extracted from the DT instread of using the config header defines. The supported properties right now are: PHY-mode ("phy-mode") and PHY-address ("reg"). The base addresses for the ethernet controllers can be removed from the header files as well. Please note that this patch also removes the E1000 network driver from some MVEBU config headers. This is necessary, as with DM_ETH configured and the e1000 driver enabled, the PCI driver also needs to support DM. But the MVEBU PCI(e) driver still needs to get ported to DM. When this is done, the E1000 driver can be enabled again. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Simon Glass <sjg@chromium.org>
| * | arm: mvebu: Add SPI driver model supportStefan Roese2016-01-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables the DM support for the SPI driver and the SPI NOR flash chips. Some MVEBU boards boot from SPI NOR, so adding the aliases and enabling CONFIG_DM_SEQ_ALIAS is needed here. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Simon Glass <sjg@chromium.org>
| * | arm: mvebu: Add DM and OF_CONTROL support to SPLStefan Roese2016-01-143-9/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds full DM support to the SPL on MVEBU. Currently only serial is supported. Other drivers will follow. This patch also adds the necessary config values for the DEBUG UART to the MVEBU defconfig files. This came in handy while implementing this DM support. Additionally, the mvebu specific SPL linker script is removed and this common one is used instead: arch/arm/cpu/u-boot-spl.lds This common linker script already handles all special cases. No need to reinvent the wheel for MVEBU here. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Simon Glass <sjg@chromium.org>
* | | sniper: Various boot-related env settings, devicetree supportPaul Kocialkowski2016-01-131-15/+11
| | | | | | | | | | | | | | | | | | | | | This adds various env settings for more flexible boot possibilities, including devicetree support and distro defaults config. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* | | lpc32xx: devkit3250: update board configuration fileVladimir Zapolskiy2016-01-131-1/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The change updates DevKit3250 board powerd by NXP LPC3250 SoC: * due to increased resulting U-boot image size give more space to store loaded and relocated versions, * add DMA support, which is used by NAND SLC driver, * add NXP OHCI and PHY drivers to the image, * add USB, JFFS and FAT commands. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
* | | omap4_panda: Convert to config_distro_bootcmd.hTom Rini2016-01-131-24/+27
| | | | | | | | | | | | | | | | | | | | | Based on the am335x_evm conversion, switch to config_distro_bootcmd for mmc and pxe. Tested with Fedora 23. Signed-off-by: Tom Rini <trini@konsulko.com>
* | | ti_armv7_common.h: Add CONFIG_CMD_EXT4_WRITETom Rini2016-01-131-0/+1
| | | | | | | | | | | | | | | | | | | | | Given that with config_distro_defaults.h we always have ext4 read support, add in write support. Signed-off-by: Tom Rini <trini@konsulko.com>
* | | am335x_evm.h: unsed CONFIG_BOOTDELAYTom Rini2016-01-131-4/+0
| | | | | | | | | | | | | | | | | | | | | Now that ti_armv7_common.h uses config_distro_defaults.h we don't need to include it again and then undef CONFIG_BOOTDELAY Signed-off-by: Tom Rini <trini@konsulko.com>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini2016-01-131-1/+0
|\ \ \ | |/ / |/| |
| * | arm: socfpga: Enable SPL_DM_SEQ_ALIAS for all SOCFPGA configsNathan Rossi2016-01-131-1/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This feature is required in SPL to enable support for loading from SPI flash. Also clean up the #define in socfpga_common.h. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Reviewed-by: Stefan Roese <sr@denx.de> Acked: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin-Liang See <clsee@altera.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | am43xx_evm: qspi: do not define DM_SPI and DM_SPI_FLASH for splMugunthan V N2016-01-131-0/+2
| | | | | | | | | | | | | | | | | | Since OMAP's spl doesn't support DM currently, do not define DM_SPI and DM_SPI_FLASH for spl build. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | dra7xx_evm: qspi: do not define DM_SPI and DM_SPI_FLASH for splMugunthan V N2016-01-131-0/+5
| | | | | | | | | | | | | | | | Since OMAP's spl doesn't support DM currently, do not define DM_SPI and DM_SPI_FLASH for spl build. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | rockchip: Use the debug UART on rk3036Simon Glass2016-01-121-0/+2
|/ | | | | | | Rather than using a new debug UART implementation, use the standard one provided by U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
* Merge git://git.denx.de/u-boot-rockchipTom Rini2016-01-081-0/+1
|\
| * rockchip: Fix the configuration for chromebook_jerrySimon Glass2016-01-081-0/+1
| | | | | | | | | | | | | | | | Various updates did not make it through to this board. Also the instructions for building a SPI image are no-longer correct. Fix these so that Jerry can boot to a prompt again. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-01-081-0/+2
|\ \
| * | imx: mx6ul: disable VIDEO for SPLPeng Fan2016-01-071-0/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | With DEBUG macro enabled, SPL build failure: " arch/arm/cpu/armv7/built-in.o: In function `reset_misc': ~/uboot/arch/arm/cpu/armv7/mx6/soc.c:406: undefined reference to `lcdif_power_down' scripts/Makefile.spl:244: recipe for target 'spl/u-boot-spl' failed " Wrap VIDEO settings with ifndef CONFIG_SPL_BUILD Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
* | cyrus: Enable STDIO deregisterAndy Fleming2016-01-081-0/+1
| | | | | | | | | | | | | | | | If CONFIG_SYS_STDIO_DEREGISTER is not enabled, usb reset will fail every time. Enabling it allows usb reset to work. Signed-off-by: Andy Fleming <afleming@gmail.com>
* | arm64: Juno/FVP: adjust kernel load addressAndre Przywara2016-01-081-2/+2
|/ | | | | | | | | | | | | | | | | The default kernel load offset for an arm64 kernel is 0x80000, so U-Boot takes cares of moving the loaded kernel to a matching memory location just before booting it. Since we run with caches off, this takes a while for any decently sized kernel - with no output explaining the reason for the delay (unless one uses a DEBUG build). By adjusting the default load offset for Juno and VFP to be 512K aligned in the first place we can skip this copying and boot much faster. Tested on Juno. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-01-032-1/+24
|\
| * arm: novena: Switch novena to config_distro_bootcmdVagrant Cascadian2015-12-141-1/+22
| | | | | | | | | | | | | | | | | | | | Switch Novena to distro bootcmd, so it can be used with debian easily. Signed-off-by: Vagrant Cascadian <vagrant@aikidev.net> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Sean Cross <xobs@kosagi.com> Cc: Stefano Babic <sbabic@denx.de> Tested-by: Vagrant Cascadian <vagrant@aikidev.net>
| * imx: mx7: enable CONFIG_FSL_CLKPeng Fan2015-12-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit "677f970bc62a661690b3431543d5a5d5e682ba70" introduce a new macro "CONFIG_FSL_CLK" that get_clocks() should not be limited by ESDHC. But that patch missed to enable it for i.MX7. THis patch enables CONFIG_FSL_CLK to let get_clocks work. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Adrian Alonso <aalonso@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* | Merge git://git.denx.de/u-boot-socfpgaTom Rini2015-12-2416-40/+92
|\ \ | | | | | | | | | | | | | | | | | | Conflicts: include/configs/axs101.h Signed-off-by: Tom Rini <trini@konsulko.com>
| * | arm: socfpga: Add support for Denali NAND controllerMarek Vasut2015-12-221-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add common configuration bits for the Denali NAND controller and also support for using it as a boot device in SPL. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
| * | arm: socfpga: Enable DFU MMC support only if DM_MMC is enabledMarek Vasut2015-12-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is not possible to compile DFU MMC support if the MMC support is not compiled into U-Boot. Secure the code with an ifdef to prevent compiler splat. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
| * | arm: socfpga: Enable SPL MMC/SPI support only if DM_MMC/SPI is enabledMarek Vasut2015-12-221-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is not possible to compile MMC/SPI SPL if the respective DM_MMC/DM_SPI bits are not enabled. Secure the code with an ifdef to prevent compiler splat. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
| * | arm: socfpga: sr1500: Update qspiboot to use UBIFSChin Liang See2015-12-221-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the qspiboot console command to use UBIFS instead of old jffs2 file system. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de>
| * | arm: socfpga: sockit: Update qspiboot to use UBIFSChin Liang See2015-12-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the qspiboot console command to use UBIFS instead of old jffs2 file system. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de>
| * | arm: socfpga: arria5_socdk: Update qspiboot to use UBIFSChin Liang See2015-12-221-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the qspiboot console command to use UBIFS instead of old jffs2 file system. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de>
| * | arm: socfpga: cyclone5_socdk: Update qspiboot to use UBIFSChin Liang See2015-12-221-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the qspiboot console command to use UBIFS instead of old jffs2 file system. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de>
| * | arm: socfpga: sr1500: Enable qspiload console commandChin Liang See2015-12-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enabling qspiload command which will load the kernel image and dtb from UBIFS within MTD partition labeled UBI. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de>
| * | arm: socfpga: sockit: Enable qspiload console commandChin Liang See2015-12-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enabling qspiload command which will load the kernel image and dtb from UBIFS within MTD partition labeled UBI. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de>
| * | arm: socfpga: arria5_socdk: Enable qspiload console commandChin Liang See2015-12-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enabling qspiload command which will load the kernel image and dtb from UBIFS within MTD partition labeled UBI. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de>
| * | arm: socfpga: cyclone5_socdk: Enable qspiload console commandChin Liang See2015-12-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enabling qspiload command which will load the kernel image and dtb from UBIFS within MTD partition labeled UBI. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de>
| * | arm: socfpga: sr1500: Enable ubiload console commandChin Liang See2015-12-221-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enabling ubiload command to load kernel image and device tree from mtd part labeled "UBI". ubiload command will search the file from directory /boot. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de>
| * | arm: socfpga: sockit: Enable ubiload console commandChin Liang See2015-12-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enabling ubiload command to load kernel image and device tree from mtd part labeled "UBI". ubiload command will search the file from directory /boot. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de>
OpenPOWER on IntegriCloud