summaryrefslogtreecommitdiffstats
path: root/include/configs
Commit message (Collapse)AuthorAgeFilesLines
* sunxi: Move all boards to the driver-modelHans de Goede2015-05-041-1/+1
| | | | | | | | | | | | | Now that we've everything prepared for it remove the DM settings from the defconfig(s) and simply always set them for sunxi. This makes all sunxi boards allways use the driver model for gpios and ethernet, and allows us to move over more bits to the driver-model without the need to introduce #ifdef-ery for boards which are not yet using DM. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: dts: Add a CONFIG_DEFAULT_DEVICE_TREE setting to all sunxi boardsHans de Goede2015-05-041-1/+1
| | | | | | | | | | | | | | | This is a preparation patch for switching all sunxi boards over to using the driver model. Note that rather then defining both CONFIG_DEFAULT_DEVICE_TREE (for u-boot) and CONFIG_FDTFILE (for the kernel), this commit simply replaces all CONFIG_FDTFILE defconfig settings with CONFIG_DEFAULT_DEVICE_TREE and uses CONFIG_DEFAULT_DEVICE_TREE for setting the default fdtfile env value in sunxi-common.h . Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: emac: port to phylibHans de Goede2015-05-041-0/+2
| | | | | | | | | This is a preparation-patch for adding device-model support to the emac driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Stefan Roese <sr@denx.de>
* sunxi: Do not build i2c support when we've no i2c controllersHans de Goede2015-05-041-4/+3
| | | | | | | | | | | This fixes the following errors being printed during boot: Error, wrong i2c adapter 0 max 0 possible Error, wrong i2c adapter 0 max 0 possible Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblazeTom Rini2015-04-293-5/+70
|\
| * ARM: zynq: move SoC sources to mach-zynqMasahiro Yamada2015-04-291-2/+2
| | | | | | | | | | | | | | Move arch/arm/cpu/armv7/zynq/* -> arch/arm/mach-zynq/* Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * zynqmp: Enable SDHCI0 optionsMichal Simek2015-04-291-0/+2
| | | | | | | | | | | | | | Enable SDHCI0 for zynqmp. Add empty gpio.h because of sdhci requirement. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * zynqmp: Enable FS_GENERIC optionSiva Durga Prasad Paladugu2015-04-291-2/+3
| | | | | | | | | | | | | | Provide an option to write filesystem independend commands. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * zynqmp: Add SPI driver support for ZynqMPSiva Durga Prasad Paladugu2015-04-291-0/+7
| | | | | | | | | | | | | | | | | | Added the SPI driver support for ZynqMP The controller is same as zynq SPI controller Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
| * zynqmp: i2c: Enable i2c driver for zynqMPSiva Durga Prasad Paladugu2015-04-291-0/+23
| | | | | | | | | | | | | | | | | | | | Enable the i2c driver for ZynqMP Also enable the eeprom for read and writes to eeprom on ZynqMP ZynqMP uses the same i2c controller as in Zynq Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * zynqmp: Add support for R5 sw loadingMichal Simek2015-04-291-0/+2
| | | | | | | | | | | | | | Add support for loading sw for R5 with enabling for zynqmp. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
| * zynqmp: caches: Enable dcache for zynqmpSiva Durga Prasad Paladugu2015-04-291-1/+1
| | | | | | | | | | | | | | | | Define the mmu table till 2MB granularity enable dcaches for zynqmp. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * zynq: Add Zynq PicoZed board supportNathan Rossi2015-04-291-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PicoZed is a System-on-Module board which is marketed as part of the ZedBoard/MicroZed/etc. collection. It includes a Zynq-7000 processor. This patch adds support that covers all the variants of the PicoZed including the SKUs with Z7010/Z7020 and Z7015/Z7030 Zynq chips. This patch set however only covers support for the System-on-Module and does not cover any extra components that are available on carrier boards (except those that are fanned out of the module itself). More information on this board, its variants and available carrier boards is available at: http://zedboard.org/product/picozed Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * zynq: Enable GPIO driver and GPIO commandsMichal Simek2015-04-291-0/+3
| | | | | | | | | | | | Enable GPIO driver and GPIO commands. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-socfpgaTom Rini2015-04-281-1/+7
|\ \
| * | arm: socfpga: spl: Adjust the SYS_INIT_RAM_SIZE to have room for the spl mallocDinh Nguyen2015-04-211-1/+1
| | | | | | | | | | | | | | | | | | | | | We need to adjust the SYS_INIT_RAM_SIZE to have room for the SPL_MALLOC_SIZE. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
| * | arm: socfpga: spl: add CONFIG_SPL_STACK to socfpga_common.hDinh Nguyen2015-04-211-0/+5
| | | | | | | | | | | | Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
| * | arm: socfpga: spl: Add CONFIG_SPL_MAX_SIZE to be 64KBDinh Nguyen2015-04-211-0/+1
| | | | | | | | | | | | | | | | | | The Cyclone5 SoCFPGA has 64KB of OCRAM for SPL use. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-04-285-64/+312
|\ \ \ | |_|/ |/| |
| * | mx6cuboxi: Load the correct 'fdtfile' variableFabio Estevam2015-04-271-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of hardcoding the 'fdtfile' variable, let's detect the SoC and board variant on the fly and change the dtb name. Based on the scheme done on am335x board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-By: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | mx6cuboxi: Use more standard namings for fdt variablesFabio Estevam2015-04-271-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | README file suggests to use 'fdtfile' for the dtb file name and 'fdt_addr_r' for the dtb address in RAM, so do as suggested. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | nitrogen6x: allow gzipped bitmap displayEric Nelson2015-04-221-0/+3
| | | | | | | | | | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * | arm: mx6: tqma6: Extract baseboard configs into separate config fileStefan Roese2015-04-222-41/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch extracts all baseboard specific defines into a separate config file. This makes it easier to add other baseboards that use the TQMa6 SoM. This patch will be used by the upcoming WRU-IV board support which also uses the TQMa6 SoM. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Stefano Babic <sbabic@denx.de> Acked-By: Markus Niebel <Markus.Niebel@tq-group.com>
| * | imx: ventana: update boot scripts to support ubifs boot volTim Harvey2015-04-221-17/+27
| | | | | | | | | | | | | | | | | | | | | Added support in default boot scripts to find kernel/dtbs on a boot volume separate from rootfs volume. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | imx: ventana: add usb_pgood_delay 2sec defaultTim Harvey2015-04-221-0/+1
| | | | | | | | | | | | | | | | | | | | | We have encountered many USB storage devices that require more warm-up than the spec allows for. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | imx: ventana: config: enable EXT4 filesystem read/write supportTim Harvey2015-04-221-0/+2
| | | | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | imx: ventana: config: enable edid supportTim Harvey2015-04-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the 'i2c edid' command to query and display data from an attached HDMI monitor of LVDS display with an EDID device. Example: Ventana > i2c dev 2 && i2c edid 0x50 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | imx: ventana: config: Support ramdiskTim Harvey2015-04-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Set the initrd_high env so that ramdisk range can be properly set. See commit 7e9603e and README Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | imx: ventana: config: add USB Mass Storage (ums) supportTim Harvey2015-04-221-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the USB mass storage gadget to enable access to on-board storage. Example: Ventana > ums 0 mmc 0 # provide ums access to the uSD Ventana > ums 0 usb 0 # provide ums access to the first USB device Ventana > ums 0 sata 0 # provide ums access to an mSATA device Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | imx: ventana: assign default ethprime dynamicallyTim Harvey2015-04-221-1/+0
| | | | | | | | | | | | | | | | | | | | | Gateworks Ventana boards don't all use IMX6 FEC, so lets define default ethprime based off the first detected device. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | imx: ventana: add i210 supportTim Harvey2015-04-221-0/+1
| | | | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | imx: ventana: disable 4k tftp/nfs packetsTim Harvey2015-04-221-5/+0
| | | | | | | | | | | | | | | | | | | | | I've encountered issues when using 4k packets through certain switches. For now disable this and go back to using MTU size packets. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | mx6: Add initial SPL support for HummingBoard-i2eXFabio Estevam2015-04-221-0/+205
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the initial SPL support for HummingBoard-i2eX, which is based on a MX6 Dual. For more information about HummingBoard, please check: http://www.solid-run.com/products/hummingboard/ Based on the work from Jon Nettleton and Rabeeh Khoury. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-04-2432-121/+1000
|\ \ \
| * | | ls2085a: esdhc: Add esdhc support for ls2085aYangbo Lu2015-04-233-4/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds esdhc support for ls2085a. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
| * | | armv8/ls2085ardb: Enable NAND SPL supportScott Wood2015-04-231-5/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable NAND boot support using SPL framework. To boot from NAND, either use DIP switches on board, or "qixis_reset nand" command. Details of forming NAND image can be found in README. Signed-off-by: Scott Wood <scottwood@freescale.com> [York Sun: Remove +S from defconfig after commit 252ed872] Signed-off-by: York Sun <yorksun@freescale.com>
| * | | armv8/ls2085aqds: NAND boot supportScott Wood2015-04-232-5/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds NAND boot support for LS2085AQDS, using SPL framework. Details of forming NAND image can be found in README. Signed-off-by: Scott Wood <scottwood@freescale.com> [York Sun: Remove +S from defconfig after commit 252ed872] Signed-off-by: York Sun <yorksun@freescale.com>
| * | | board/ls2085qds: Add support ethernetPrabhakar Kushwaha2015-04-231-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of ethernet: - eth.c: mapping lane to slot for (0x2A, 0x07) - ls2085a.c: To enable/disable dpmac and get link type Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
| * | | armv8/ls2085ardb: Add support of LS2085ARDB platformYork Sun2015-04-231-0/+266
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LS2085ARDB is a evaluation platform that supports LS2085A family SoCs. This patch add sbasic support for the platform. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | | armv8/ls2085aqds: Add support of LS2085AQDS platformYork Sun2015-04-232-7/+314
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LS2085AQDS is an evaluatoin platform that supports the LS2085A family SoCs. This patch add basic support of the platform. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
| * | | drivers/fsl-mc: Changed MC firmware loading for new boot architectureJ. German Rivera2015-04-233-7/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changed MC firmware loading to comply with the new MC boot architecture. Flush D-cache hierarchy after loading MC images. Add environment variables "mcboottimeout" for MC boot timeout in milliseconds, "mcmemsize" for MC DRAM block size. Check MC boot status before calling flib functions. Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
| * | | armv8: Add SerDes framework for Layerscape ArchitectureMinghuan Lian2015-04-231-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | armv8/ls2085a: Fix generic timer clock sourceYork Sun2015-04-231-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The timer clock is system clock divided by 4, not fixed 12MHz. This is common to the SoC, not board specific. Primary core is fixed when u-boot still runs in board_f. Secondary cores are fixed by reading a variable set by u-boot. Signed-off-by: York Sun <yorksun@freescale.com> CC: Mark Rutland <mark.rutland@arm.com>
| * | | armv8/ls2085a: Update common header filePrabhakar Kushwaha2015-04-233-109/+211
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ls2085a_common.h contains hard-coded information for NOR/NAND flash, I2C, DDR, etc. These are platform specific. Move them out of common header file and placed into respective board header files. Move TEXTBASE to 1MB offset to fit NOR flash with up to 1MB sector size. Enable command auto complete. Update prompt symbol. Set fdt_high to 0xa0000000 because Linux requires that the fdt be 8-byte aligned and below 512 MiB. Besides ensuring compliance with the 512 MiB limit, this avoids problems with the dtb being misaligned within the FIT image. Change the MC FW, MC DPL and Debug server NOR addresses in compliance with the NOR flash layouts for 128MB flash. Add PCIe macros. Enable "loadb" command. Disable debug server. Enable workaround for erratum A008511. Stop reset on panic for postmortem debugging. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
| * | | driver/i2c/mxc: Enable I2C bus 3 and 4York Sun2015-04-2328-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some SoCs have more than two I2C busses. Instead of adding ifdef to the driver, macros are put into board header file where CONFIG_SYS_I2C_MXC is defined. Signed-off-by: York Sun <yorksun@freescale.com> CC: Heiko Schocher <hs@denx.de>
| * | | board/ls2085_common: Increase malloc lengthPrabhakar Kushwaha2015-04-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Increase malloc length for more than 2M. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | armv8/fsl-lsch3: Add Freescale Debug Server driverBhupesh Sharma2015-04-211-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Debug Server driver is responsible for loading the Debug server FW on the Service Processor (Cortex-A5 core) on LS2085A like SoCs and then polling for the successful initialization of the same. TOP MEM HIDE is adjusted to ensure the space required by Debug Server FW is accounted for. MC uses the DDR area which is calculated as: MC DDR region start = Top of DDR - area reserved by Debug Server FW Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | Add bootscript support to esbc_validate.gaurav rana2015-04-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Default environment will be used for secure boot flow which can't be edited or saved. 2. Command for secure boot is predefined in the default environment which will run on autoboot (and autoboot is the only option allowed in case of secure boot) and it looks like this: #define CONFIG_SECBOOT \ "setenv bs_hdraddr 0xe8e00000;" \ "esbc_validate $bs_hdraddr;" \ "source $img_addr;" \ "esbc_halt;" #endif 3. Boot Script can contain esbc_validate commands and bootm command. Uboot source command used in default secure boot command will run the bootscript. 4. Command esbc_halt added to ensure either bootm executes after validation of images or core should just spin. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | | colibri_vf: Enable USB support for Colibri VybridSanchayan Maity2015-04-231-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable USB support on Toradex Colibri Vybrid Modules. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
* | | | ARM: vf610: Initial integration for Colibri VF50/VF61Sanchayan Maity2015-04-231-0/+234
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds initial support for Colibri VF50/VF61 based on Freescale Vybrid SoC. - CPU clocked at 396/500 MHz - DDR3 at 396MHz - for VF50, use PLL2 as memory clock (synchronous mode) - for VF61, use PLL1 as memory clock (asynchronous mode) - Console on UART0 (Colibri UART_A) - Ethernet on FEC1 - PLL5 based RMII clocking (E.g. No external crystal) - UART_A and UART_C I/O muxing - Boot from NAND by default Tested on Colibri VF50/VF61 booting using serial loader over UART. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Acked-by: Stefan Agner <stefan@agner.ch>
OpenPOWER on IntegriCloud