summaryrefslogtreecommitdiffstats
path: root/include/configs/gw_ventana.h
Commit message (Collapse)AuthorAgeFilesLines
* net: Move CONFIG_E1000 options to KconfigSimon Glass2015-08-211-1/+0
| | | | | | | | Move config for the E1000 Ethernet driver to Kconfig and tidy up affected boards. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* kconfig: add config option for shell promptNikita Kiryanov2015-08-131-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add option to set shell prompt string from menuconfig and migrate boards globally. The migration is done as follows: - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the entry moved to their defconfig files. - Boards that defined some kind of #ifdef logic which selects the CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT right before the #ifdef logic and were left alone. - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h files. This results in a streamlined default value across platforms, and includes the following files: spear-common, sunxi-common, mv-common, ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common. - Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were not updated in their respective defconfig files under the assumption that since they did not explicitly define a value, they're fine with whatever the default is. - On the other hand, boards that relied on a value defined in some <boards>_common.h file such as woodburn_common, rpi-common, bur_am335x_common, ls2085a_common, siemens_am33x_common, and omap3_evm_common, had their values moved to the respective defconfig files. - The define V_PROMPT was removed, since it is not used anywhere except for assigning a value for CONFIG_SYS_PROMPT. Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> [trini: Add spring, sniper, smartweb to conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-08-021-5/+0
|\
| * imx6: standardise OCOTP and fuse config to mx6_commonPeter Robinson2015-07-101-5/+0
| | | | | | | | | | | | | | | | | | According to README.mxc_ocotp the OCOTP is a stanard i.MX6 SoC feature so centralise the config in mx6_common.h so functionality is standard across all boards Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | usb: USB download gadget and functions config options coherent namingPaul Kocialkowski2015-07-221-2/+2
|/ | | | | | | | | | | | This introduces a coherent scheme for naming USB download gadget and functions config options. The download USB gadget config option is moved to CONFIG_USB_GADGET_DOWNLOAD for better consistency with other gadgets and each function's config option is moved to a CONFIG_USB_FUNCTION_ prefix. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Test HW: Odroid_XU3 (Exynos5422), trats (Exynos4210)
* Move default y configs out of arch/board KconfigJoe Hershberger2015-06-251-3/+0
| | | | | | | | | | | | | | | | | | | Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: Tom Rini <trini@konsulko.com>
* net: Move the CMD_NET config to defconfigsJoe Hershberger2015-06-011-1/+0
| | | | | | | | | | | This also selects CONFIG_NET for any CONFIG_CMD_NET board. Remove the imx default for CONFIG_NET. This moves the config that was defined by 60296a8 (commands: add more command entries in Kconfig). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* Move setexpr to KconfigJoe Hershberger2015-06-011-1/+0
| | | | | | | | | | | Another shell scripting command that has not been moved. Moved using tools/moveconfig.py using these settings: CMD_SETEXPR bool n y Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
* mx6: standardise CONFIG_CMD_CACHEPeter Robinson2015-05-261-4/+0
| | | | | | | Move CONFIG_CMD_CACHE to mx6_common and standardise the way it's defined. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Tom Rini <trini at konsulko.com>
* imx6: generic MMC config options to mx6_commonPeter Robinson2015-05-261-6/+0
| | | | | | | Move all standard mx6 MMC configs to mx6_common. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Tom Rini <trini at konsulko.com>
* imx6: standardise filesystem and boot optionsPeter Robinson2015-05-261-8/+1
| | | | | | Move all standard filesystem, partition and fdt options to mx6_common. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
* imx6: move generic miscellaneous and overwrite optionsPeter Robinson2015-05-261-12/+0
| | | | | | | Move generic miscellaneous options that are standard across most, if not all, mx6 boards to central mx6_common define to ensure consistent features. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
* imx6: centralise common boot options in mx6_common.hPeter Robinson2015-05-261-4/+0
| | | | | | | Define common LOADADDR and BOOTDELAY to ensure a consistent experience across mx6 boards Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
* imx6: move standard ATAG configs to mx6_common.hPeter Robinson2015-05-261-5/+1
| | | | | | | Define the standard ATAG consfigs in mx6_common. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Tom Rini <trini at konsulko.com>
* imx6: move generic imx6 options to mx6_common.hPeter Robinson2015-05-261-5/+0
| | | | | | | | All boards define CONFIG_MX6, CONFIG_DISPLAY_BOARDINFO, CONFIG_DISPLAY_CPUINFO and CONFIG_SYS_GENERIC_BOARD so define them in mx6_common Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Tom Rini <trini at konsulko.com>
* imx6: move all standard includes to mx6_common.hPeter Robinson2015-05-261-10/+0
| | | | | | | | | | | The linux/sizes.h, asm/arch/imx-regs.h, asm/imx-common/gpio.h, config_cmd_default.h includes are used fairly universally across imx6 boards so include them in mx6_common.h by default. We define CONFIG_SYS_NO_FLASH before config_cmd_default.h so that we don't have to undef CONFIG_CMD_FLASH / CONFIG_CMD_IMLS everywhere. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
* imx: ventana: update MMC env configurationTim Harvey2015-05-261-2/+3
| | | | | | We will use the same env size and redundancy used for NAND env for MMC. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: config: enable Falcon modeTim Harvey2015-05-211-0/+16
| | | | | | Falcon mode entails the SPL booting the OS directly instead of U-Boot. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: add pmic_setup to SPLTim Harvey2015-05-191-0/+1
| | | | | | | We need to do any PMIC setup in the SPL if we are to bypass U-Boot for falcon mode. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: (cosmetic) clean up size defines for improved readabilityTim Harvey2015-05-191-10/+12
| | | | | | Use the SZ_1M and SZ_1K macros from linuz/sizes.h for improved readability Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: config: use MMC SPL RAW supportTim Harvey2015-05-191-4/+0
| | | | | | Switch to MMC RAW support for SPL. We will place the uboot.img at 69KB. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: config: enable Thermal supportTim Harvey2015-05-151-0/+4
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: enable DM_SERIALTim Harvey2015-05-151-0/+1
| | | | | | mxc_serial supports DM so lets use it. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: config: enable driver modelTim Harvey2015-05-151-0/+7
| | | | | | Enable U-Boot Driver Model (DM). Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: config: enable gpio commandTim Harvey2015-05-151-0/+1
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: display SPL boot deviceTim Harvey2015-05-151-0/+1
| | | | | | Display what device the SPL will fetch uboot.img from Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: set dtype env var to boot mediaTim Harvey2015-05-151-4/+4
| | | | | | | Bootscripts for some distro's such as Android can benefit from knowing what boot media its script was loaded from. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-04-281-23/+45
|\
| * imx: ventana: update boot scripts to support ubifs boot volTim Harvey2015-04-221-17/+27
| | | | | | | | | | | | | | Added support in default boot scripts to find kernel/dtbs on a boot volume separate from rootfs volume. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: ventana: add usb_pgood_delay 2sec defaultTim Harvey2015-04-221-0/+1
| | | | | | | | | | | | | | We have encountered many USB storage devices that require more warm-up than the spec allows for. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: ventana: config: enable EXT4 filesystem read/write supportTim Harvey2015-04-221-0/+2
| | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: ventana: config: enable edid supportTim Harvey2015-04-221-0/+1
| | | | | | | | | | | | | | | | | | | | Enable the 'i2c edid' command to query and display data from an attached HDMI monitor of LVDS display with an EDID device. Example: Ventana > i2c dev 2 && i2c edid 0x50 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: ventana: config: Support ramdiskTim Harvey2015-04-221-0/+1
| | | | | | | | | | | | | | | | Set the initrd_high env so that ramdisk range can be properly set. See commit 7e9603e and README Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: ventana: config: add USB Mass Storage (ums) supportTim Harvey2015-04-221-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | Add support for the USB mass storage gadget to enable access to on-board storage. Example: Ventana > ums 0 mmc 0 # provide ums access to the uSD Ventana > ums 0 usb 0 # provide ums access to the first USB device Ventana > ums 0 sata 0 # provide ums access to an mSATA device Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: ventana: assign default ethprime dynamicallyTim Harvey2015-04-221-1/+0
| | | | | | | | | | | | | | Gateworks Ventana boards don't all use IMX6 FEC, so lets define default ethprime based off the first detected device. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: ventana: add i210 supportTim Harvey2015-04-221-0/+1
| | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: ventana: disable 4k tftp/nfs packetsTim Harvey2015-04-221-5/+0
| | | | | | | | | | | | | | I've encountered issues when using 4k packets through certain switches. For now disable this and go back to using MTU size packets. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* | driver/i2c/mxc: Enable I2C bus 3 and 4York Sun2015-04-231-0/+1
|/ | | | | | | | | Some SoCs have more than two I2C busses. Instead of adding ifdef to the driver, macros are put into board header file where CONFIG_SYS_I2C_MXC is defined. Signed-off-by: York Sun <yorksun@freescale.com> CC: Heiko Schocher <hs@denx.de>
* dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to KconfigSimon Glass2015-02-121-1/+0
| | | | | Move this option to Kconfig and update all boards. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: mx6: gw_ventana: Define CONFIG_SYS_MALLOC_F_LENMarek Vasut2014-12-301-0/+1
| | | | | | | | | | | | | | This board uses setup_i2c() in SPL. The setup_i2c() function internally calls gpio_request(), which in turn internally calls strdup(). The strdup() requires a running mallocator, so this patch makes the mallocator available. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Sean Cross <xobs@kosagi.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com>
* spi: mxc: fix sf probe when using mxc_spiNikita Kiryanov2014-09-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MXC SPI driver has a feature whereas a GPIO line can be used to force CS high across multiple transactions. This is set up by embedding the GPIO information in the CS value: cs = (cs | gpio << 8) This merge of cs and gpio data into one value breaks the sf probe command: if the use of gpio is required, invoking "sf probe <cs>" will not work, because the CS argument doesn't have the GPIO information in it. Instead, the user must use "sf probe <cs | gpio << 8>". For example, if bank 2 gpio 30 is used to force cs high on cs 0, bus 0, then instead of typing "sf probe 0" the user now must type "sf probe 15872". This is inconsistent with the description of the sf probe command, and forces the user to be aware of implementaiton details. Fix this by introducing a new board function: board_spi_cs_gpio(), which will accept a naked CS value, and provide the driver with the relevant GPIO, if one is necessary. Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Eric Benard <eric@eukrea.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* imx: ventana: add pci fixup for PLX PEX860x switch GPIOTim Harvey2014-09-091-0/+1
| | | | | | | | Most Gateworks Ventana boards use a PLX PEX860x PCIe switch for PCIe expansion. These boards use GPIO on the PLX device as PERST# for the downstream ports thus we assert this when the PLX is enumerated. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: add econfig commandTim Harvey2014-08-201-1/+4
| | | | | | | | | | | | The Gateworks Ventana EEPROM contains a set of configuration bits that affect the removal of device-tree nodes that support peripherals that do not exist on sub-loaded boards. This patch adds: - a structure to define a config bit name, dt node alias, bit position - an array of supported configuration items - an econfig command to get/set/list configuration bits - use of the array when adjusting the FDT prior to boot Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2014-06-301-0/+11
|\
| * imx: ventana: switch to SPLTim Harvey2014-06-061-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch to an SPL image. The SPL for Ventana does the following: - setup i2c and read the factory programmed EEPROM to obtain DRAM config and model for board-specific calibration data - configure DRAM per CPU/size/layout/devices/calibration - load u-boot.img from NAND and jump to it This allows for a single SPL+u-boot.img to replace the previous multiple boa configurations. Cc: Stefan Roese <sr@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Andy Ng <andreas2025@gmail.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* | usb: hub: remove CONFIG_USB_HUB_MIN_POWER_ON_DELAYStephen Warren2014-06-011-1/+0
|/ | | | | | | | | | | | | | | | | Now that we wait the correct specification-mandated time at the end of usb_hub_power_on(), I suspect that CONFIG_USB_HUB_MIN_POWER_ON_DELAY has no purpose. For cm_t35.h, we already wait longer than the original MIN_POWER_ON_DELAY, so this change is safe. For gw_ventana.h, we will wait as long as the original MIN_POWER_ON_DELAY iff pgood_delay was at least 200ms. I'm not sure if this is the case or not, hence I've CC'd relevant people to test this change. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* imx: ventana: add HDMI and LVDS display capabilityTim Harvey2014-05-091-0/+16
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: Convert to generic boardTim Harvey2014-05-091-0/+2
| | | | | | Enable CONFIG_SYS_GENERIC_BOARD on ventana. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ventana: Add support for the LTC3676 PMICTim Harvey2014-05-091-0/+2
| | | | | | | | | | | The LTC3676 PMIC is used instead of the PFUZE100 PMIC on the GW51xx/GW52xx/GW53xx Ventana baseboards. In order to support the IMX6Q SoC at 1GHz on those baseboards, we need to adjust the voltage scaling for the SW1 and SW3 DC/DC converters on the LTC3676 for 1225mV. Note that the scalar values for the LTC3676 are board-specific as they relate to a resistor devider chosen by the board design. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ventana: Add Gateworks Ventana family supportTim Harvey2014-03-121-0/+425
Gateworks Ventana is a product family based on the i.MX6. This patch adds support for all boards in the Ventana family. Where possible, data from the boards EEPROM is used to determine various details about the board at runtime. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
OpenPOWER on IntegriCloud