summaryrefslogtreecommitdiffstats
path: root/drivers/usb
Commit message (Collapse)AuthorAgeFilesLines
* Merge git://git.denx.de/u-boot-usbTom Rini2015-03-023-6/+95
|\
| * usb: gadget: fastboot: Set the Serial Number for Fastboot GadgetDileep Katta2015-02-251-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Configure the serial number using the serial# environment variable during the fastboot bind. This enables "fastboot devices" to return the serial number for the attached devices. Signed-off-by: Dileep Katta <dileep.katta@linaro.org> Acked-by: Steve Rae <srae@broadcom.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
| * fastboot: OUT transaction length must be aligned to wMaxPacketSizeDileep Katta2015-02-251-5/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OUT transactions must be aligned to wMaxPacketSize for each transfer, or else transfer will not complete successfully. This patch modifies rx_bytes_expected to return a transfer length that is aligned to wMaxPacketSize. Note that the value of wMaxPacketSize and ep->maxpacket may not be the same value, and it is the value of wMaxPacketSize that should be used for alignment. wMaxPacketSize is passed depending on the speed of connection. Signed-off-by: Dileep Katta <dileep.katta@linaro.org> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
| * usb: gadget: fastboot: Add fastboot eraseDileep Katta2015-02-251-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | Adds the fastboot erase functionality, to erase a partition specified by name. The erase is performed based on erase group size, to avoid erasing other partitions. The start address and the size is aligned to the erase group size for this. Currently only supports erasing from eMMC. Signed-off-by: Dileep Katta <dileep.katta@linaro.org> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
| * fastboot: add support for "oem format" commandRob Herring2015-02-251-0/+11
| | | | | | | | | | | | | | | | | | | | | | Add "oem format" command to write partition table. This relies on the env variable partitions to contain the list of partitions as required by the gpt command. Note that this does not erase any data other than the partition table. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Steve Rae <srae@broadcom.com>
| * fastboot: add "fastboot oem" command supportMichael Scott2015-02-251-0/+15
| | | | | | | | | | | | | | | | | | Add code stub to handle "fastboot oem __" command. As unlock is a common fastboot command, distinguish that it is not implemented. Signed-off-by: Michael Scott <michael.scott@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Steve Rae <srae@broadcom.com>
| * usb: musb-new: omap2430: Reset the MUSB controller earlyPaul Kocialkowski2015-02-241-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When booting from USB peripheral boot, the bootrom will not properly deinit the MUSB controller, which doesn't clearly indicate an USB disconnection to the host and leaves U-Boot to deal with the state of the previous USB session. On some host controller drivers (e.g. xhci_hcd), this ends up in a failure during set address, caused by the lack of proper disconnection notification. Resetting the controller early in U-Boot notifies the host of the disconnection and doesn't hurt other use cases. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@ti.com>
| * exynos: usb: make dwc3_set_mode to staticJoonyoung Shim2015-02-241-1/+1
| | | | | | | | | | | | | | The dwc3_set_mode function is used only in drivers/usb/host/xhci-exynos5.c so make it to static. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
* | usb: UniPhier: add UniPhier on-chip xHCI host driver supportMasahiro Yamada2015-03-013-0/+94
| | | | | | | | | | | | | | Support xHCI host driver used on Panasonic UniPhier platform. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
* | ARM: UniPhier: move uniphier_ehci_reset() functionMasahiro Yamada2015-03-011-1/+14
| | | | | | | | | | | | | | | | Because uniphier_ehci_reset() is only called from ehci-uniphier.c, it can be a static function there. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
* | ARM: UniPhier: remove EHCI platform devicesMasahiro Yamada2015-03-012-14/+2
| | | | | | | | | | | | | | | | | | | | | | Now UniPhier platform highly depends on Device Tree configuration (CONFIG_OF_CONTROL is select'ed by Kconfig). Since the EHCI is only used on main U-Boot, we can drop platform devices of the EHCI controllers. We still keep UART platform devices because they might be useful for SPL. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
* | ARM: UniPhier: include <mach/*.h> instead of <asm/arch/*.h>Masahiro Yamada2015-03-011-1/+1
|/ | | | | | | | | Since commit 0e7368c6c426 (kbuild: prepare for moving headers into mach-*/include/mach), we can replace #include <asm/arch/*.h> with <mach/*.h> so we do not need to create the symbolic link during the build. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* sunxi: musb: Check Vbus-det before enabling otg port powerHans de Goede2015-02-211-0/+29
| | | | | | | | | | | | Sending out 5V when there is a charger connected to the otg port is not a good idea, so check for this and error out. Note this commit currently breaks otg support on the q8h tablets, as we need to do some magic with the pmic there to get vbus info, this is deliberate (better safe then sorry), fixing this is on my TODO list. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: otg: Fix peripheral modeHans de Goede2015-02-161-12/+1
| | | | | | | | Peripheral mode needs us to signal vusb high to the phy for it to work, just like the host mode does. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* usb: pci: Add XHCI driver for PCISimon Glass2015-02-052-0/+61
| | | | | | | | Add a driver which locates the available XHCI controllers on the PCI bus and makes them available. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* usb: pci: Use pci_find_class() to find the deviceSimon Glass2015-02-051-52/+1
| | | | | | | Use the new utility function instead of local code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: usb: Remove use of fdtdec GPIO supportSimon Glass2015-01-293-30/+28
| | | | | | These functions are going away, so use the new uclass support instead. Signed-off-by: Simon Glass <sjg@chromium.org>
* usb: eth: asix88179: add ability to modify MAC addressRene Griessl2015-01-181-0/+14
| | | | | | | This patch enables U-Boot to modify the MAC address of the AX88179. Tested on RECS5250 (similar to Arndale5250) Signed-off-by: Rene Griessl <rgriessl@cit-ec.uni-bielefeld.de>
* musb-new: Add interrupt queue supportHans de Goede2015-01-181-0/+65
| | | | | | | Add interrupt queue support, so that a usb keyboard can be used without causing huge latencies. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* musb-new: Add urb and hep parameters to construct_urbHans de Goede2015-01-181-32/+31
| | | | | | | | Make construct_urb take an urb and hep parameter, rather then having it always operate on the file global urb and hep structs. This is a preperation patch for adding interrupt queue support. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* musb-new: Properly remove a transfer from the schedule on timeoutHans de Goede2015-01-184-3/+14
| | | | | | | | | | | If a transfer / urb times-out, properly remove it from the schedule, rather then letting it sit on the ep head. This stops the musb code from getting confused and refusing to queue further transfers after a timeout. Tested by unplugging a usb-keyboard, replugging it and doing a usb-reset, before this commit the keyboard would not work after the usb-reset. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* musb-new: Fix reset sequence when in host modeHans de Goede2015-01-181-11/+20
| | | | | | | | | | | | | | | | | | | | | | This commit fixes a number of issues with the reset sequence of musb-new in host mode: 1) Our usb device probe relies on a second device reset being done after the first descriptors read. Factor the musb reset code into a usb_reset_root_port function (and add this as an empty define for other controllers), and call this when a device has no parent. 2) Just like with normal usb controllers there needs to be a delay after reset, for normal usb controllers, this is handled in hub_port_reset, add a delay to usb_reset_root_port. 3) Sync the musb reset sequence with the upstream kernel, clear all bits of power except bits 4-7, and increase the time reset is asserted to 50 ms. With these fixes an usb keyboard I have now always enumerates properly, where as earlier it would only enumerare properly once every 5 tries. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* musb-new: Fix interrupt transfers not workingHans de Goede2015-01-181-1/+1
| | | | | | | | | | | | | | For bulk and ctrl transfers common/usb.c sets udev->status = USB_ST_NOT_PROC, but it does not do so for interrupt transfers. musb_uboot.c: submit_urb() however was waiting for USB_ST_NOT_PROC to become 0, and thus without anyone setting USB_ST_NOT_PROC would exit immediately for interrupt urbs, returning the urb status of EINPROGRESS as error. This commit fixes this, thereby also making usb_kbd.c work together with musb_new and CONFIG_SYS_USB_EVENT_POLL. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* musb-new: Use time based timeouts rather then cpu-cycles based timeoutsHans de Goede2015-01-181-8/+8
| | | | | | | | | | | | CPU cycle based timeouts are no good, because how long they use depends on CPU speed. Instead use time based timeouts, and wait one second for a device connection to show up (per the USB spec), and wait USB_TIMEOUT_MS for various urbs to complete. This fixes "usb start" taking for ever when no device is plugged into the otg port. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* musb-new: Add sunxi musb controller supportHans de Goede2015-01-182-0/+280
| | | | | | | This is based on Jussi Kivilinna's work for the linux-sunxi-3.4 kernel to use the kernels musb driver instead of Allwinners own custom driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* musb-new: Add register defines for different reg layout on sunxiHans de Goede2015-01-181-0/+92
| | | | | | | The sunxi SoCs also have a musb controller, but with a different register layout. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* usb: Add an interval parameter to create_int_queueHans de Goede2015-01-181-2/+2
| | | | | | | | Currently create_int_queue is only implemented by the ehci code, and that does not honor interrupt intervals, but other drivers which might also want to implement create_int_queue may honor intervals, so add an interval param. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* usb: gadget: pxa25x_udc: fix use-before-initialized bugAlex Sadovsky2015-01-181-2/+2
| | | | | | | | | | | Fix use-before-initialized bug in pxa25x_udc driver. Function usb_gadget_register_driver calls udc_disable, and udc_disable calls pullup_off that uses dev->mach->udc_command. But dev->mach is initialized in usb_gadget_register_driver after calling udc_disable. This patch fixes the order of initialization. Signed-off-by: Alex Sadovsky <Nable.MainInbox@googlemail.com>
* usb: gadget: f_dfu: Add get_alt function to pass the USB compliance testStefan Roese2015-01-181-0/+8
| | | | | | | | | | | | | | | | | | | | Without this function the USB compliance test (USB 2.0 Command Verifier) will fail in the "Interface Descriptor Test" with this error message: FAIL (1.2.51) A successful GetInterface request must return the alternate setting set by a prior call to SetInterface. Lets add this function to read back the value so that the DFU device fully passes the USB compliance test. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Roger Meier <r.meier@siemens.com> Cc: Samuel Egli <samuel.egli@siemens.com> Cc: Enrico Leto <enrico.leto@siemens.com> Acked-by: Heiko Schocher <hs@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de>
* usb: gadget: composite: Fix NULL pointer crash in USB compliance testStefan Roese2015-01-181-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the DXR2 board (AM335x using MUSB) the USB compliance test suite (USB 2.0 Command Verifier) will cause the board to crash and reset upon the "BOS Descriptor Test - Addressed state". Here the output from the DRX2 while running this test: GADGET DRIVER: usb_dnl_dfu musb-hdrc: peripheral reset irq lost! composite_setup (776) data abort pc : [<87f693ac>] lr : [<87f6911c>] sp : 86f33a58 ip : 00000000 fp : 86f3bbac r10: 00000f00 r9 : 86f33ef4 r8 : 86f37da8 r7 : 00000005 r6 : 86f33a90 r5 : 00000000 r4 : 86f37e30 r3 : 00000000 r2 : 00000000 r1 : 87f9c888 r0 : 00000016 Flags: Nzcv IRQs off FIQs on Mode SVC_32 Resetting CPU ... resetting ... By adding the case statement for USB_DT_BOS and therefore not running into the default case (jump to unkown label) this crash is fixed. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Roger Meier <r.meier@siemens.com> Cc: Samuel Egli <samuel.egli@siemens.com> Cc: Enrico Leto <enrico.leto@siemens.com> Acked-by: Heiko Schocher <hs@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de>
* sunxi: Move usb-controller init code out of ehci-sunxi.c for reuse for otgHans de Goede2015-01-141-203/+10
| | | | | | | | | | Most of the usb-controller init code found in ehci-sunxi.c also is necessary to init the otg usb controller, so move it to a common place. While at it also update various #ifdefs / defines for sun8i support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* usb: eth: add ASIX AX88179 DRIVERRene Griessl2014-12-313-0/+708
| | | | | | | | | | This patch adds driver support for the ASIX AX88179 USB3.0 to GbE network adapter. Driver has been tested on the RECS5250 COM module (similar to ARDALE5250). Testcase was DHCP and PXE boot. Signed-off-by: Rene Griessl <rgriessl@cit-ec.uni-bielefeld.de>
* gadget: f_thor: check pointers before use in download_tail()Przemyslaw Marczak2014-12-181-2/+14
| | | | | | | | | | Some pointers in function download_tail() were not checked before the use. This could possibly cause the data abort. To avoid this, check if the pointers are not null is added. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [TestHW: Exynos4412-Trats2]
* fastboot: add support for continue commandRob Herring2014-12-181-0/+14
| | | | | | | | | | | | The fastboot continue command is defined to exit fastboot and continue autoboot. This commit implements the continue command and the exiting of fastboot only. Subsequent u-boot commands can be processed after exiting fastboot. Autoboot should implement a boot script such as "fastboot; mmc read <...>; bootm" to fully implement the fastboot continue function. Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [TestHW: Exynos4412-Trats2]
* usb, g_dnl: generalize DFU detach functionsRob Herring2014-12-182-1/+18
| | | | | | | | | In order to add detach functions for fastboot, make the DFU detach related functions common so they can be shared. Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [TestHW: Exynos4412-Trats2]
* USB: gadget: atmel_usba_udc: fix transfer hang issueBo Shen2014-12-161-1/+0
| | | | | | | | | | | | | When receive data, the RXRDY in status register set by hardware after a new packet has been stored in the endpoint FIFO. After, we copy from FIFO, we clear it, make the FIFO can be accessed again. In the receive_data() function, this bit RXRDY has been cleared. So, after the receive_data() function return, this bit should not be cleared again, or else it will cause the accessing FIFO corrupt, which will make the data loss. Signed-off-by: Bo Shen <voice.shen@atmel.com>
* Merge git://git.denx.de/u-boot-dmTom Rini2014-12-111-24/+0
|\
| * lib: string: move strlcpy() to a common placeMasahiro Yamada2014-12-111-24/+0
| | | | | | | | | | | | | | | | | | Move strlcpy() definition from drivers/usb/gadget/ether.c to lib/string.c because it is a very useful function. Let's add the prototype to include/linux/string.h too. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2014-12-112-3/+25
|\ \ | | | | | | | | | | | | | | | | | | Conflicts: board/freescale/mx6sxsabresd/mx6sxsabresd.c Signed-off-by: Tom Rini <trini@ti.com>
| * | usb: ehci: do not set the LSB of Current qTD pointerMasahiro Yamada2014-11-191-1/+0
| | | | | | | | | | | | | | | | | | | | | According to EHCI specification, the LSB of DWORD 3 of Queue Head (Current qTD Pointer) is not T-bit, but always zero. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | usb:ehci-mx6 add phy mode query functionPeng Fan2014-11-141-2/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | usb_phy_enable should return status bit, but not phy mode bit, thus add a new function usb_phy_mode to query the PHY for it's mode and make usb_phy_enable just return 0 but not 'phy_ctrl & USBPHY_CTRL_OTG_ID'. Include a new board weak function board_usb_phy_mode. If board code does not reimplement this function, it just call usb_phy_mode and return usb_phy_mode's return value. The reason to include such a weak function is: " SOC OTG core <--connect--> board HOST port, but no pin id for the board host port, so board can not use usb_phy_mode to return the phy mode, but define it's own rule." Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye Li <B37916@freescale.com>
* | | drivers: usb: fsl: Check USB Erratum A007792 applicabilityNikhil Badola2014-12-111-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | Check USB Erratum A007792 applicability. If applicable, add corresponding property in the device tree via device tree fixup Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | drivers: usb: fsl: Add USB device-tree errata frameworkNikhil Badola2014-12-111-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new framework for fsl usb erratum handling to standardize erratum checking only inside Uboot. Information to kernel is passed via a boolean property corresponding to erratum, hence eliminating need for code duplication inside kernel Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | drivers: usb: Make usb device-tree fixup code architecture independentNikhil Badola2014-12-111-0/+113
| |/ |/| | | | | | | | | | | | | | | move usb device tree fixup code from "arch/powerpc/" to "drivers/usb/" so that it works independent of architecture it is running on Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | usb: phy: omap_usb_phy: fix build breakageFelipe Balbi2014-12-041-2/+0
| | | | | | | | | | | | | | | | | | | | there's no such function usb3_phy_power(), it's likely that author meant to call, usb_phy_power() instead, but that's already called properly from xhci-omap.c. Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* | usb: UniPhier: support OF configurationMasahiro Yamada2014-11-281-1/+37
| | | | | | | | | | | | | | | | | | If CONFIG_OF_CONTROL is defined, search device tree nodes that are compatible with "panasonic,uniphier-ehci" and take the base address from their "reg" property. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Marek Vasut <marex@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2014-11-261-3/+2
|\ \
| * | drivers : usb: fsl: Implement usb Erratum A007798 workaroundNikhil Badola2014-11-241-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | Set TXFIFOTHRESH to adjust ddr pipeline delay for successful large usb writes Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | drivers: usb: fsl: Move USB Errata checking codeNikhil Badola2014-11-211-1/+1
| |/ | | | | | | | | | | | | | | | | | | Move USB Errata checking code from "arch/powerpc" to architecture independent file "fsl_usb.h" so that errata(s) become independent of the architecture. For each erratum checking function for PPC arch, define a nop function for non PPC arch for successful compilation in either case Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | Merge branch 'master' of http://git.denx.de/u-boot-samsungTom Rini2014-11-261-8/+47
|\ \
OpenPOWER on IntegriCloud