summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* dm: i2c: Add driver for Cadence I2C IPMoritz Fischer2016-04-131-0/+1
| | | | | | | | | | | This is a possible drop in replacement for drivers/i2c/zynq-i2c.c Since this is cadence IP it has been renamed to cdns-i2c, to make sense with the compatible string. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* x86: i2c: Add a stub driver for Intel I2C/SMbusSimon Glass2016-01-241-0/+1
| | | | | | | | | | | This is used on most Intel platforms. We don't have a driver for it yet, but add a stub to handle the init. For now this targets ivybridge so we may want to add a device tree binding and generalise it when other platforms are supported. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: i2c: Allow muxes to be enabled for SPL separatelySimon Glass2016-01-211-2/+2
| | | | | | | Since I2C muxes are seldom needed in SPL, and the code for this increases the size somewhat, add a separate option to enable I2C muxes for SPL. Signed-off-by: Simon Glass <sjg@chromium.org>
* i2c, avr32: fix compiler warning "input is not relaxable"Heiko Schocher2015-11-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | compiling U-Boot for avr32 boards shows since commit 3d1957f0ea01 "dm: i2c: Add support for multiplexed I2C buses" this warning: Building current source for 4 boards (4 threads, 8 jobs per thread) avr32: + atstk1002 +(atstk1002) drivers/i2c/built-in.o: warning: input is not relaxable avr32: + grasshopper +(grasshopper) drivers/i2c/built-in.o: warning: input is not relaxable avr32: + atngw100 +(atngw100) drivers/i2c/built-in.o: warning: input is not relaxable avr32: + atngw100mkii +(atngw100mkii) drivers/i2c/built-in.o: warning: input is not relaxable 0 4 0 /4 0:00:16 : atngw100mkii Fix it. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Roger Meier <r.meier@siemens.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
* arm: Remove unused ST-Ericsson u8500 archStefan Roese2015-09-151-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This arch does not seem to be supported / used at all in the current U-Boot mainline source tree any more. So lets remove the core u8500 code and code that was only referenced by this platform. Please note that this patch also removes these config options: - CONFIG_PL011_SERIAL_RLCR - CONFIG_PL011_SERIAL_FLUSH_ON_INIT As they only seem to be referenced by u8500 based boards. Without any such board in the current code, these config option don't make sense any more. Lets remove them as well. If someone still wants to use this platform, then please send patches to re-enable support by adding at least one board that references this code. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: John Rigby <john.rigby@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tom Rini <trini@konsulko.com> Cc: Heiko Schocher <hs@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* rockchip: Add I2C driverSimon Glass2015-09-021-0/+1
| | | | | | | Add an I2C driver for the Rockchip RK3288, using driver model. It should work for other Rockchip SoCs also. Signed-off-by: Simon Glass <sjg@chromium.org>
* cros_ec: Support the LDO access method used by springSimon Glass2015-08-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Add a driver to support the special LDO access used by spring. This is a custom method in the cros_ec protocol - it does not use an I2C pass-through. There are two implementation choices: 1. Write a special LDO driver which can talk across the EC. Duplicate all the logic from TPS65090 for retrying when the LDO fails to come up. 2. Write a special I2C bus driver which pretends to be a TPS65090 and transfers reads and writes using the LDO message. Either is distasteful. The latter method is chosen since it results in less code duplication and a fairly simple (30-line) implementation of the core logic. The crosec 'ldo' subcommand could be removed (since i2c md/mw will work instead) but is retained as a convenience. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: cros_ec: Convert the I2C tunnel code to use driver modelSimon Glass2015-08-051-0/+1
| | | | | | | | | | | | | | | | | | | The Chrome OS EC supports tunnelling through to an I2C bus on the EC. This currently uses a copy of the I2C command code and a special 'crosec' sub-command. With driver model we can define an I2C bus which tunnels through to the EC, and use the normal 'i2c' command to access it. This simplifies the code and removes some duplication. Add an I2C driver which tunnels through to the EC. Adjust the EC code to support binding child devices so that it can be set up. Adjust the existing I2C xfer function to fit driver model better. For now the old code remains to allow things to still work. It will be removed in a later patch once the new flow is fully enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: i2c: Add support for multiplexed I2C busesSimon Glass2015-08-051-0/+2
| | | | | | | | | | | | | | | | | Add a new I2C_MUX uclass. Devices in this class can multiplex between several I2C buses, selecting them one at a time for use by the system. The multiplexing mechanism is left to the driver to decide - it may be controlled by GPIOs, for example. The uclass supports only two methods: select() and deselect(). The current mux state is expected to be stored in the mux itself since it is the only thing that knows how to make things work. The mux can record the current state and then avoid switching unless it is necessary. So select() can be skipped if the mux is already in the correct state. Also deselect() can be made a nop if required. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: i2c: add i2c-gpio driverPrzemyslaw Marczak2015-04-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds driver model support to software emulated i2c bus driver. This driver supports kernel-style device tree bindings. Fdt properties in use: - compatible - "i2c-gpio" - gpios - data and clock GPIO pin phandles - delay-us - micro seconds delay between GPIOs toggle operations, which is 1/4 of I2C speed clock period. Added: - Config: CONFIG_DM_I2C_GPIO - File: drivers/i2c/i2c-gpio.c - File: doc/device-tree-bindings/i2c/i2c-gpio.txt Driver base code is taken from: drivers/i2c/soft-i2c.c, changes: - use "i2c-gpio" naming - update comments style - move preprocesor macros into functions - add device tree support - add driver model i2c support - code cleanup, - add Kconfig entry Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Added braces in i2c_gpio_xfer() to fix style nit: Signed-off-by: Simon Glass <sjg@chromium.org>
* lpc32xx: i2c: add LPC32xx I2C interface supportAlbert ARIBAUD \(3ADEV\)2015-04-101-0/+1
| | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* dm: i2c: Add a compatbility layerSimon Glass2015-01-291-0/+1
| | | | | | | | | | | | | For boards which use multiple I2C devices, or for SOCs which support multiple boards, we might want to convert these to driver model at different times. At present this is difficult because we need to either use CONFIG_DM_I2C for a board or not. Add a compatibility layer which implements the old API, thus allowing a board to move to driver model for I2C without requiring that everything it uses is moved in the same commit. Signed-off-by: Simon Glass <sjg@chromium.org>
* i2c: UniPhier: add driver for UniPhier FIFO-builtin i2c controllerMasahiro Yamada2015-01-291-0/+1
| | | | | | | | | | This commit adds on-chip I2C driver used on newer SoCs of Panasonic UniPhier platform. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
* i2c: UniPhier: add driver for UniPhier i2c controllerMasahiro Yamada2015-01-291-0/+1
| | | | | | | | | | This commit adds on-chip I2C driver used on some old Panasonic UniPhier SoCs. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
* dm: i2c: Add a sandbox I2C driverSimon Glass2014-12-111-1/+1
| | | | | | | | | This driver includes some test features such as only supporting certain bus speeds. It passes its I2C traffic through to an emulator. Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* dm: i2c: Add I2C emulation driver for sandboxSimon Glass2014-12-111-0/+1
| | | | | | | | | In order to test I2C we need some sort of emulation interface. Add hooks to allow a driver to emulate an I2C device for sandbox. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* dm: i2c: Add a uclass for I2CSimon Glass2014-12-111-0/+1
| | | | | | | | | | | | | | The uclass implements the same operations as the current I2C framework but makes some changes to make it fit driver model better: - Remove the chip address from API calls - Remove the address length from API calls - Remove concept of 'current' I2C bus - Drop all existing init functions Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* blackfin: rename bfin-twi_i2c driver to adi_i2cScott Jiang2014-11-171-1/+1
| | | | Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
* i2c: designware: Convert driver to multibus/multiadapter frameworkStefan Roese2014-10-291-1/+1
| | | | | | | | | | | | | | | | | | | | | In preparation for the SoCFPGA support of the designware I2C driver, convert this driver to the common CONFIG_SYS_I2C framework. This patch converts all users of this driver, this is: - ST spearxxx boards - AXS101 (ARC700 platform) I couldn't test this patch on those boards. Only compile tested for all spear boards. And tested on SoCFPGA. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Tested-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Heiko Schocher <hs@denx.de> Cc: Vipin Kumar <vk.vipin@gmail.com> Cc: Jeroen Hofstee <jeroen@myspectrum.nl>
* i2c: mxs: Add basic support for i2c frameworkMarek Vasut2014-10-291-1/+1
| | | | | | | | | | | This patch just converts the function prototypes used throughout this driver to match those of the i2c framework. There is so far no functional change. This patch does not do the deeper integration of the framework bits. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de>
* Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'Albert ARIBAUD2014-07-281-1/+1
|\
| * mvtwsi: convert to CONFIG_SYS_I2C frameworkHans de Goede2014-07-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Note this has only been tested on Allwinner sunxi devices (support for which gets introduced by a later patch). The kirkwood changes have been compile tested using the wireless_space board config, the orion5x changes have been compile tested using the edminiv2 board config. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Heiko Schocher <hs@denx.de>
* | i2c: IHS I2C master driverDirk Eibach2014-07-071-0/+1
|/ | | | | | | | IHS I2C master support was merely a hack in the osd driver. Now it is a proper u-boot I2C framework driver, supporting the v2.00 master features. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* i2c, davinci: convert driver to new mutlibus/mutliadapter frameworkVitaly Andrianov2014-04-171-1/+1
| | | | | | | | | - add davinci driver to new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Heiko Schocher <hs@denx.de>
* i2c: kona: Add Kona I2C driverDarwin Rambo2014-02-221-0/+1
| | | | | | | | Add support for the Kona I2C controller found on Broadcom mobile SoCs. Signed-off-by: Darwin Rambo <drambo@broadcom.com> Reviewed-by: Steve Rae <srae@broadcom.com> Reviewed-by: Tim Kryger <tkryger@linaro.org>
* driver:i2c:s3c24x0: adapt driver to new i2cPiotr Wilczek2013-12-051-1/+1
| | | | | | | | | | | | | | | | This patch adapts the s3c24x0 driver to the new i2c framework. Config file is modified for all the boards that use the driver. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Minkyu Kang <mk7.kang@samsung.com> CC: Heiko Schocher <hs@denx.de> CC: Inderpal Singh <inderpal.singh@linaro.org> CC: David Müller <d.mueller@elsoft.ch> CC: Chander Kashyap <k.chander@samsung.com> CC: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Reviewed-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
* i2c, omap1510: remove i2c driverHeiko Schocher2013-11-131-1/+0
| | | | | | | | remove omap1510 i2c driver, as there is no board which uses it Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Jian Zhang <jzhang@ti.com>
* i2c, zynq: convert zynq i2c driver to new multibus/multiadapter frameworkHeiko Schocher2013-11-131-1/+1
| | | | | | | | | - add zync i2c driver to new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Michal Simek <michal.simek@xilinx.com>
* i2c, omap24xx: convert driver to new mutlibus/mutliadapter frameworkHeiko Schocher2013-11-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - add omap24xx driver to new multibus/multiadpater support - adapted all config files, which uses this driver Tested on the am335x based siemens boards rut, dxr2 and pxm2 posted here: http://patchwork.ozlabs.org/patch/263211/ Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Tom Rini <trini@ti.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Steve Sakoman <sakoman@gmail.com> Cc: Thomas Weber <weber@corscience.de> Cc: Tom Rix <Tom.Rix@windriver.com> Cc: Grazvydas Ignotas <notasas@gmail.com> Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com> Cc: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Ilya Yanok <yanok@emcraft.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Nishanth Menon <nm@ti.com> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Peter Barada <peter.barada@logicpd.com> Cc: Nagendra T S <nagendra@mistralsolutions.com> Cc: Michael Jones <michael.jones@matrix-vision.de> Cc: Raphael Assenat <raph@8d.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Stefano Babic <sbabic@denx.de>
* i2c: sh_i2c: Update to new CONFIG_SYS_I2C frameworkNobuhiro Iwamatsu2013-11-131-1/+1
| | | | | | | | This updates to new I2C framwwork on sh_i2c. And this also updates boards(kzm9g and ecovec) that using sh_i2c. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* drivers: convert makefiles to Kbuild styleMasahiro Yamada2013-10-311-46/+24
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* i2c: Add support for Renesas rcarNobuhiro Iwamatsu2013-10-171-0/+1
| | | | | | | This supports i2c controller for Renesas rcar. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
* i2c: mxc: move to new subsystemtrem2013-10-171-1/+1
| | | | Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
* drivers: s3c44b0_i2c: delete an unused driverMasahiro Yamada2013-09-191-1/+0
| | | | | | | | | | Since commit 5dc5f36 removed B2 board support, there are no boards enabling s3c44b0_i2c. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Andrea Scian <andrea.scian@dave-tech.it> Acked-by: Heiko Schocher <hs@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2013-07-241-4/+6
|\ | | | | | | | | | | | | | | | | | | | | The sandburst-specific i2c drivers have been deleted, conflict was just over the SPDX conversion. Conflicts: board/sandburst/common/ppc440gx_i2c.c board/sandburst/common/ppc440gx_i2c.h Signed-off-by: Tom Rini <trini@ti.com>
| * i2c: add Faraday FTI2C010 I2C controller supportKuo-Jung Su2013-07-231-0/+1
| | | | | | | | | | | | | | | | | | Faraday FTI2C010 is a multi-function I2C controller which supports both master and slave mode. This patch simplily implements the master mode only. Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> CC: Heiko Schocher <hs@denx.de>
| * i2c, ppc4xx_i2c: switch to new multibus/multiadapter supportDirk Eibach2013-07-231-1/+1
| | | | | | | | | | | | | | Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Heiko Schocher <hs@denx.de> Cc: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de>
| * tegra: i2c: Enable new CONFIG_SYS_I2C frameworkSimon Glass2013-07-231-1/+1
| | | | | | | | | | | | | | | | This enables CONFIG_SYS_I2C on Tegra, updating existing boards and the Tegra i2c driver to support this. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heiko Schocher <hs@denx.de>
| * i2c, fsl_i2c: switch to new multibus/multiadapter supportHeiko Schocher2013-07-231-1/+1
| | | | | | | | | | | | | | | | | | - added to fsl_i2c driver new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@wwwdotorg.org>
| * i2c, soft-i2c: switch to new multibus/multiadapter supportHeiko Schocher2013-07-231-1/+1
| | | | | | | | | | | | | | | | | | - added to soft_i2c driver new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@wwwdotorg.org>
| * i2c: add i2c_core and prepare for new multibus supportHeiko Schocher2013-07-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This Patch introduce the new i2c_core file, which holds the I2C core functions, for the rework of the multibus/ multiadapter support. Also adds changes in i2c.h for the new I2C multibus/multiadapter support. This new support can be activated with the CONFIG_SYS_I2C define. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Stephen Warren <swarren@wwwdotorg.org>
* | Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-241-17/+1
|/ | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* i2c: zynq: Add support for Xilinx ZynqMichal Simek2013-04-301-0/+1
| | | | | | | | | Support Xilinx Zynq i2c controller. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@ti.com>
* i2c: Add support for designware i2c controllerVipin KUMAR2012-04-241-1/+1
| | | | | | | | | | | | | Earlier, a driver exists in the u-boot source for designware i2c interface. That driver was specific to spear platforms. This patch implements the i2c controller as a generic driver which can be used by multiple platforms The driver files are now renamed to designware_i2c.c and designware_i2c.h and these are moved into drivers/i2c folder for reusability by other platforms Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com>
* sh: i2c: Add support I2C controller of SH7734Nobuhiro Iwamatsu2012-04-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | Renesas SH7734 has two I2C interfaceis. This supports these I2C. V5: - include i2c.h. - Add check of icsr bit polling logic. - Implement i2c_probe. V4: - Remove sh_i2c_dump_reg function. - Use puts() when there's no format. - Chnage check for I2C bus number. - Remove space before the semi-colon. V3: - Fix error for whitespace. V2: - Changed bit control to use the clr|set|clrsetbits_* functions. - Fix wrong comment style. - Add new line before for loop in i2c_read. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
* tegra: i2c: Add I2C driverYen Lin2012-03-291-0/+1
| | | | | | | | | | | | | Add basic i2c driver for Tegra2 with 8- and 16-bit address support. The driver requires CONFIG_OF_CONTROL to obtain its configuration from the device tree. (Simon Glass: sjg@chromium.org modified for upstream) Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* i2c: sh: Add support I2C for Renesas SHNobuhiro Iwamatsu2011-11-231-0/+1
| | | | | | | | This supports I2C of Renesas SH. I tested on SH7724. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Heiko Schocher <hs@denx.de>
* iMX28: Add I2C bus driverMarek Vasut2011-11-111-0/+1
| | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Acked-by: Heiko Schocher<hs@denx.de>
* I2C: Add driver for ST-Ericsson U8500 i2cMichael Brandt2011-06-011-0/+1
| | | | | Signed-off-by: John Rigby <john.rigby@linaro.org> CC: Heiko Schocher <hs@denx.de>
* pxa: move i2c driver to the common placeLei Wen2011-04-271-0/+1
| | | | | | | | | For better sharing with other platform other than pxa's, it is more convenient to put the driver to the common place. Acked-by: Heiko Schocher <hs@denx.de> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Lei Wen <leiwen@marvell.com>
OpenPOWER on IntegriCloud