summaryrefslogtreecommitdiffstats
path: root/drivers/dfu
Commit message (Collapse)AuthorAgeFilesLines
* dfu: nand: Verify writesPeter Tyser2015-03-301-1/+1
| | | | | | | | | | Previously NAND writes were not verified and could fail silently. Add a verification step after all writes to NAND. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
* dfu: mmc: file buffer: remove static allocationPrzemyslaw Marczak2015-03-091-3/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For writing files, DFU implementation requires the file buffer with the len at least of file size. For big files it requires the same big buffer. Previously the file buffer was allocated as a static variable, so it was a part of U-Boot .bss section. For 32MiB len of buffer we have 32MiB of additional space, required for this section. The .bss needs to be cleared after the relocation. This introduces an additional boot delay at every start, but usually the dfu feature is not required at the standard boot, so the buffer should be allocated only if required. This patch removes the static allocation of this buffer, and alloc it with memalign after first call of function: - dfu_fill_entity_mmc() and the buffer is freed on dfu_free_entity() call. This was tested on Trats2. A quick test with trace. Boot time from start to main_loop() entry: - ~888ms - before this change (arch memset enabled for .bss clear) - ~464ms - after this change Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Marek Vasut <marek.vasut@gmail.com>
* dfu: samsung: move call to set_dfu_alt_info() to dfu common codePrzemyslaw Marczak2015-02-251-0/+3
| | | | | | | | | | | | | | This common call can be used for setting proper entities based on dfu command arguments. The config: CONFIG_SET_DFU_ALT_INFO, was used only for few configs, and now it is common. The board file should implement: - set_dfu_alt_info() function Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [Test HW: Odroid U3 (Exynos 4412)]
* dfu: dfu_get_buf: check the value of env dfu_bufsiz before usePrzemyslaw Marczak2014-12-181-2/+6
| | | | | | | | | | | | | | | | | | | In function dfu_get_buf(), the size of allocated buffer could be defined by the env variable. The size from this variable was passed for memalign() without checking its value. And the the memalign will return non null pointer for size 0. This could possibly cause data abort, so now the value of var is checked before use. And if this variable is set to 0 then the default size will be used. This commit also changes the base passed to simple_strtoul() to 0. Now decimal and hex values can be used for the variable dfu_bufsiz. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [TestHW: Exynos4412-Trats2]
* dfu: mmc: check if mmc device exists in mmc_block_op()Przemyslaw Marczak2014-12-181-1/+7
| | | | | | | | | | | The function mmc_block_op() is the last function before the physicall data write, but the mmc device pointer is not checked. If mmc device not exists, then data abort will occur. To avoid this, first the mmc device pointer is checked. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [TestHW: Exynos4412-Trats2]
* usb, g_dnl: generalize DFU detach functionsRob Herring2014-12-181-16/+0
| | | | | | | | | In order to add detach functions for fastboot, make the DFU detach related functions common so they can be shared. Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [TestHW: Exynos4412-Trats2]
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2014-12-111-2/+27
|\ | | | | | | | | | | | | Conflicts: board/freescale/mx6sxsabresd/mx6sxsabresd.c Signed-off-by: Tom Rini <trini@ti.com>
| * dfu: thor: fix: Modify dfu_get_alt() function to support absolute pathsLukasz Majewski2014-11-141-2/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently the ext4 file system imposed passing absolute path with its file name parameter. As a result dfu_alt_info env variable has been modified to provide absolute path when ext4 file system is accessed (e.g. /uImage ext4 0 2;). Unfortunately, lthor flashing program provides plain file name (like uImage) and hence those two file names do not match anymore. Presented commit also allows lthor to write files to sub directories (like /boot/bin/uImage). Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Marek Vasut <marex@denx.de>
* | linux/kernel.h: sync min, max, min3, max3 macros with LinuxMasahiro Yamada2014-11-231-1/+1
|/ | | | | | | | | | | | | | | | | | | | U-Boot has never cared about the type when we get max/min of two values, but Linux Kernel does. This commit gets min, max, min3, max3 macros synced with the kernel introducing type checks. Many of references of those macros must be fixed to suppress warnings. We have two options: - Use min, max, min3, max3 only when the arguments have the same type (or add casts to the arguments) - Use min_t/max_t instead with the appropriate type for the first argument Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [trini: Fixup arch/blackfin/lib/string.c] Signed-off-by: Tom Rini <trini@ti.com>
* dm: Add spi.h header to a few filesSimon Glass2014-10-221-0/+1
| | | | | | | | Some files are using SPI functions but not explitly including the SPI header file. Fix this, since driver model needs it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* kconfig: add blank Kconfig filesMasahiro Yamada2014-09-241-0/+0
| | | | | | | | This would be useful to start moving various config options. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* dfu: Provide means to find difference between dfu-util -e and -RLukasz Majewski2014-09-021-5/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit provides distinction between DFU device detach and reset. The -R behavior is preserved with proper handling of the dfu-util's -e switch, which detach the DFU device. By running dfu-util -e; one can force device to finish the execution of dfu command on target and execute some other scripted commands. Moreover, some naming has been changed - the dfu_reset() method now is known as dfu_detach(). New name better reflects the purpose of the code. It was also necessary to increase the number of usb_gadget_handle_interrupts() calls since we also must wait for detection of the USB reset event. Example usage: 1. -e (detach) switch dfu-util -a0 -D file1.bin;dfu-util -a3 -D uImage;dfu-util -e access to u-boot prompt. 2. -R (reset) switch dfu-util -a0 -D file1.bin;dfu-util -R -a3 -D uImage target board reset Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
* dfu: fix readback buffer overflow testStephen Warren2014-08-091-1/+1
| | | | | | | The buffer is too small if it's < size to read, not if it's <= the size. This fixes the 1MB test case on Tegra, which has a 1MB buffer. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* dfu: add SF backendStephen Warren2014-08-093-0/+143
| | | | | | This allows SPI Flash to be programmed using DFU. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* dfu: add free_entity() to struct dfu_entityStephen Warren2014-08-091-0/+3
| | | | | | | | This allows the backend to free any resources allocated during the relevant dfu_fill_entity_*() call. This will soon be used by the SF backend. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* dfu: allow backend to specify a maximum buffer sizeStephen Warren2014-08-091-5/+8
| | | | | | | | | | | | CONFIG_SYS_DFU_DATA_BUF_SIZE may be large to allow for FAT/ext layouts to transfer large files. However, this means that individual write operations will take a long time. Allow backends to specify a maximum buffer size, so that each write operation is limited to a smaller data block. This prevents the DFU protocol from timing out when e.g. writing to SPI flash. I would guess that NAND might benefit from setting this value too, but I can't test that. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* dfu: defer parsing of device string to IO backendStephen Warren2014-08-094-21/+24
| | | | | | | | | | | | | | Devices are not all identified by a single integer. To support this, defer the parsing of the device string to the IO backed, so that it can apply the appropriate rules. SPI devices are specified as controller:chip_select. SPI/SF support will be added soon. MMC devices can also be specified as controller[.hwpart][:partition] in many commands, although we don't support that syntax in DFU. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* dfu: add write error handlingStephen Warren2014-08-091-18/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix calls to dfu_write() and dfu_flush() to detect errors in the I/O itself. This could happen due to problems with the storage medium, or simply when trying to write a FAT/ext file that is larger than the buffer dfu_mmc.c maintains for this purpose. Signal the error by switching the DFU state/status. This will be picked up by the DFU client when it sends the next DFU request. Note that errors can't simply be returned from e.g. dnload_request_complete(), since that function has no way to pass errors back to the DFU client; a call to dnload_request_complete() simply means that a USB OUT completed. This error state/status needs to be cleared when the next DFU client connects. While there is a DFU_CLRSTATUS request, no DFU client seems to send this. Hence, clear this when selecting the USB alternate setting on the USB interface. Finally, dfu.c relies on a call to dfu_flush() to clear up the internal state of the write transaction. Now that errors in dfu_write() are detected, dfu_flush() may no longer be called for every transaction. Separate out the cleanup code into a new function, and call it whenever dfu_write() fails, as well as from any call to dfu_flush(). Signed-off-by: Stephen Warren <swarren@nvidia.com>
* dfu: fix some issues with reads/uploadsStephen Warren2014-08-094-21/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DFU read support appears to rely upon dfu->read_medium() updating the passed-by-reference len parameter to indicate the remaining size available for reading. dfu_read_medium_mmc() never does this, and the implementation of dfu_read_medium_nand() will only work if called just once; it hard-codes the value to the total size of the NAND device irrespective of read offset. I believe that overloading dfu->read_medium() is confusing. As such, this patch introduces a new function dfu->get_medium_size() which can be used to explicitly find out the medium size, and nothing else. dfu_read() is modified to use this function to set the initial value for dfu->r_left, rather than attempting to use the side-effects of dfu->read_medium() for this purpose. Due to this change, dfu_read() must initially set dfu->b_left to 0, since no data has been read. dfu_read_buffer_fill() must also be modified not to adjust dfu->r_left when simply copying data from dfu->i_buf_start to the upload request buffer. r_left represents the amount of data left to be read from HW. That value is not affected by the memcpy(), but only by calls to dfu->read_medium(). After this change, I can read from either a 4MB or 1.5MB chunk of a 4MB eMMC boot partion with CONFIG_SYS_DFU_DATA_BUF_SIZE==1MB. Without this change, attempting to do that would result in DFU read returning no data at all due to r_left never being set. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* dfu: Disable default calculation of CRC32Lukasz Majewski2014-06-111-13/+7
| | | | | | | | | | | | | | Patch (SHA1: bd694244db7bc969954) dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting already introduced more generic handling of the crc32 calculation. Up till now the CRC32 of received data was calculated unconditionally. This patch changes this and from now - by default the crc32 is NOT calculated anymore. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de>
* dfu: Introduction of the "dfu_hash_algo" env variable for checksum method ↵Lukasz Majewski2014-06-011-5/+47
| | | | | | | | | | | | | | | | | | | | | | | setting Up till now the CRC32 of received data was calculated unconditionally. The standard crc32 implementation causes long delay when large images were uploaded. The "dfu_hash_algo" environment variable gives the opportunity to disable on demand the hash (crc32) calculation. It can be done without the need to recompile the u-boot binary. By default the crc32 is calculated, which means that legacy behavior has been preserved. Tests results: 400 MiB ums.img file With crc32 calculation: 65 sec [avg 6.29 MB/s] Without crc32 calculation: 25 sec [avg 16.17 MB/s] Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de>
* dfu: mmc: Provide support for eMMC boot partition accessLukasz Majewski2014-05-151-0/+46
| | | | | | | | | | | | | | Before this patch it was only possible to access the default eMMC HW partition. By partition selection I mean the access to eMMC via the ext_csd[179] register programming. It sometimes happens that it is necessary to write to other partitions. This patch adds extra attribute to "raw" sub type of the dfu_alt_info environment variable (e.g. boot-mmc.bin raw 0x0 0x200 mmcpart 1;) It saves the original boot value and restores it after storing the file. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* drivers:dfu: dfu_flush(): add raw data flush to complete dfu writePrzemyslaw Marczak2014-05-151-0/+4
| | | | | | | | | | | | | | | | | | Before dfu write and flush operations separation, dfu write data was flushed by host download request with len of zero size. Since above change manually calling dfu write with zero size has non sense (e.g. in THOR). This should be done by flush operation. So now dfu_write_buffer_drain() is called in dfu_flush(). If there is any raw data to flush (like it can be in thor) then it will be physically written to medium. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de>
* dfu, nand: add medium specific polltimeout functionHeiko Schocher2014-05-081-0/+13
| | | | | | | | | | | | | | | | | | add a possibility to add a medium specific polltimeout function. So it is possible to define different poll timeouts. Used on nand medium, for setting the DFU_MANIFEST_POLL_TIMEOUT only on nand ubi partitions, which is currently the only usecase. Change-Id: If1db5f49b32d93fefa7481e8dfe5b7ccc0e65af4 Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu: mmc: change offset base handlingMateusz Zalega2014-05-051-2/+6
| | | | | | | | | | | | Previously offsets handled by dfu_fill_entity_mmc(), defined in boards' CONFIG_DFU_ALT were treated as hexadecimal regardless of their prefix, which sometimes led to confusion. This patch forces usage of explicit numerical base prefixes. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Tom Rini <trini@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
* dfu: mmc: raw data write fixMateusz Zalega2014-05-051-40/+65
| | | | | | | | | | | | | | | | | | | | | | | | When user attempted to perform a raw write using DFU (vide dfu_fill_entity_mmc) with MMC interface not initialized before, get_mmc_blk_size() reported invalid (zero) block size - it wasn't possible to write ie. a new u-boot image. This commit fixes that by initializing MMC device before use in dfu_fill_entity_mmc(). While fixing initialization sequence, I had to change about half of dfu_fill_entity_mmc's body, so I refactored it on the way to make it, IMHO, considerably more comprehensible. Being left as dead code, get_mmc_blk_size() was removed. Tested on Samsung Goni. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Tom Rini <trini@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
* dfu:fix: Replace wrong return value with proper oneLukasz Majewski2014-04-301-1/+1
| | | | | | | This patch remove always false (since we tested ret = 0) ternary operator with ret value returned. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2014-04-082-27/+46
|\ | | | | | | | | | | | | | | Conflicts: arch/arm/cpu/arm926ejs/mxs/Makefile include/configs/trats.h include/configs/trats2.h include/mmc.h
| * dfu: mmc: Replace calls to u-boot commands with native mmc APIŁukasz Majewski2014-03-231-7/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | For some time we have been using the run_command() with properly crafted string. Such approach turned to be unreliable and error prone. Switch to "native" mmc subsystem API would allow better type checking and shall improve speed. Also, it seems that this API is changing less often than u-boot commands. The approach similar to env operations on the eMMC has been reused. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
| * usb: dfu: introduce dfuMANIFEST stateHeiko Schocher2014-03-231-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | on nand flash using ubi, after the download of the new image into the flash, the "rest" of the nand sectors get erased while flushing the medium. With current u-boot version dfu-util may show: Starting download: [##################################################] finished! state(7) = dfuMANIFEST, status(0) = No error condition is present unable to read DFU status as get_status is not answered while erasing sectors, if erasing needs some time. So do the following changes to prevent this: - introduce dfuManifest state According to dfu specification ( http://www.usb.org/developers/devclass_docs/usbdfu10.pdf ) section 7: "the device enters the dfuMANIFEST-SYNC state and awaits the solicitation of the status report by the host. Upon receipt of the anticipated DFU_GETSTATUS, the device enters the dfuMANIFEST state, where it completes its reprogramming operations." - when stepping into dfuManifest state, sending a PollTimeout DFU_MANIFEST_POLL_TIMEOUT in ms, to the host, so the host (dfu-util) waits the PollTimeout before sending a get_status again. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
| * usb, dfu: extract flush code into seperate functionHeiko Schocher2014-03-231-18/+24
| | | | | | | | | | | | | | | | | | | | | | move the flushing code into an extra function dfu_flush(), so it can be used from other code. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
* | usb: dfu: add static alt num count in dfu_config_entities()Przemyslaw Marczak2014-03-131-1/+5
|/ | | | | | | | | | | | Thanks to this multiple call of function dfu_config_entities() gives continuous dfu alt numbering until call dfu_free_entities(). This allows to store dfu entities in multiple variables. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Łukasz Majewski <l.majewski@samsung.com> Tested-by: Heiko Schocher <hs@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* dfu: mmc: fs: Fix format accepted by ext4write commandLukasz Majewski2014-02-201-4/+3
| | | | | | | | | | | | | | The commit: "EXT4: Fix number base handling of "ext4write" command" SHA1: f7740f7712b8638f08b83a7e5d00bc1d6bb086a9 Cleaned up the ext4write command format. This commit shall be regarded as a follow up, since the DFU subsystem is using those commands for its normal operation. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu: Export allocated dfu buffer sizeLukasz Majewski2013-12-181-0/+5
| | | | | | | The method for exporting size of allocated buffer is provided. It is afterwards used by USB's dfu function code. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dfu: make nand upload workingBo Shen2013-11-081-0/+1
| | | | | | | | | | | Nowhere pass a value to len, which always 0, make no transfer which cause uploading failed. This patch make nand upload working. However it needs enough malloc buffer to store read data, that means the buffer at least equal to the upload partition size, or else it doesn't work. Signed-off-by: Bo Shen <voice.shen@atmel.com>
* usb: dfu: correct dfu buffer inited valueBo Shen2013-11-081-1/+1
| | | | | | | | | After dfu buffer is initialized, the buffer should be all available, while not 0. Initialize its value to min(dfu_buf_size, dfu->r_left). Signed-off-by: Bo Shen <voice.shen@atmel.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dfu: decrease dfu->r_left along with the transferBo Shen2013-11-081-0/+1
| | | | | | The value of dfu->r_left need decrease along with the transfer Signed-off-by: Bo Shen <voice.shen@atmel.com>
* drivers: convert makefiles to Kbuild styleMasahiro Yamada2013-10-311-23/+4
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* dfu:core: Export dfu_{get|free}_buf functionsLukasz Majewski2013-10-201-2/+2
| | | | | | | | Define the dfu_get_buf() and dfu_free_buf() as global functions. They are necessary for zero copy buffer management, when DFU backend is used for storing data. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu:core: Find DFU alt setting number by passing its nameLukasz Majewski2013-10-201-0/+12
| | | | | | | New function - dfu_get_alt() - has been added to dfu core. If present, it returns alt setting's number corresponding to passed name. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: new board-specific USB init interfaceMateusz Zalega2013-10-201-1/+1
| | | | | | | | | | | | | | This commit unifies board-specific USB initialization implementations under one symbol (usb_board_init), declaration of which is available in usb.h. New API allows selective initialization of USB controllers whenever needed. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com>
* dfu: ram supportAfzal Mohammed2013-09-243-2/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DFU spec mentions it as a method to upgrade firmware (software stored in writable non-volatile memory). It also says other potential uses of DFU is beyond scope of the spec. Here such a beyond the scope use is being attempted - directly pumping binary images from host via USB to RAM. This facility is a developer centric one in that it gives advantage over upgrading non-volatile memory for testing new images every time during development and/or testing. Directly putting image onto RAM would speed up upgrade process. This and convenience was the initial thoughts that led to doing this, speed improvement over MMC was only 1 second though - 6 sec on RAM as opposed to 7 sec on MMC in beagle bone, perhaps enabling cache and/or optimizing DFU framework to avoid multiple copy for ram (if worth) may help, and on other platforms and other boot media like NAND maybe improvement would be higher. And for a platform that doesn't yet have proper DFU suppport for non-volatile media's, DFU to RAM can be used. Another minor advantage would be to increase life of mmc/nand as it would be less used during development/testing. usage: <image name> ram <start address> <size> eg. kernel ram 0x81000000 0x1000000 Downloading images to RAM using DFU is not something new, this is acheived in openmoko also. DFU on RAM can be used for extracting RAM contents to host using dfu upload. Perhaps this can be extended to io for squeezing out register dump through usb, if it is worth. Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Gerhard Sittig <gsi@denx.de> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Heiko Schocher <hs@denx.de>
* dfu: unify mmc/nand read/write ops enumAfzal Mohammed2013-09-242-13/+3
| | | | | | | | | | | | | | | MMC and NAND independently defines same enumerators for read/write. Unify them by defining enum in dfu header. RAM support that is being added newly also can make use of it. Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
* dfu: Extract common DFU code to handle "dfu_alt_info" environment variableLukasz Majewski2013-09-241-0/+23
| | | | | | | | | | | New dfu_init_env_entities() function has been extracted from cmd_dfu.c and stored at dfu core. This is a dfu centric code, so it shall be processed in the core. Change-Id: I756c5de922fa31399d8804eaadc004ee98844ec2 Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Heiko Schocher <hs@denx.de>
* dfu:cosmetic: Fix printf text for buffer overflow conditionLukasz Majewski2013-09-241-2/+2
| | | | | | | Correct error message if overflow is detected. Change-Id: I8a915c7353d49822c046fbc36241237b370e6c98 Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu, nand, ubi: add partubi alt settings for updating ubi partitionHeiko Schocher2013-08-261-2/+36
| | | | | | | | | | | | | | | | | | | | updating an ubi partition needs a completely erased mtd partition, see: http://lists.infradead.org/pipermail/linux-mtd/2011-May/035416.html So, add partubi alt setting for the dfu_alt_info environment variable to mark this partition as an ubi partition. In case we update an ubi partition, we erase after flashing the image into the partition, the remaining sektors. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@ti.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Scott Wood <scottwood@freescale.com>
* dfu: Implementation of target reset after communication with dfu-util's -R ↵Lukasz Majewski2013-07-291-0/+11
| | | | | | | | | | | | | | switch This patch extends dfu code to support transmission with -R switch specified at dfu-util. When -R is specified, the extra USB_REQ_DFU_DETACH request is sent after successful data transmission. Then dfu resources are released and reset command is issued. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-244-56/+4
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* dfu:ext4:fix Fix DFU upload functionalityŁukasz Majewski2013-07-031-4/+5
| | | | | | | | | | | | | | | For the first eMMC read of data for upload, use the "large" dfu_buf (now configurable) instead of usb request buffer allocated at composite layer (which is 4KiB) [*]. For eMMC the whole file is read, which usually is larger than the buffer [*] provided with usb request. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Tom Rini <trini@ti.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de>
* dfu:ext4:fix Fix ext4{read|write} command formattingŁukasz Majewski2013-07-031-0/+2
| | | | | | | | | | | | | | | | | | In the following commit: "dfu: Support larger than memory transfers." SHA1: ea2453d56b8860dbd18a3c517531ffc8dcb5c839 The ext4{read|write} command formatting has been changed. It removed a write mandatory [sizebytes] parameter. It extents DFU_FS_EXT4 case at mmc_file_op to provide mandatory parameter for DFU write. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Tom Rini <trini@ti.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de>
OpenPOWER on IntegriCloud