summaryrefslogtreecommitdiffstats
path: root/drivers/ddr/fsl
Commit message (Collapse)AuthorAgeFilesLines
* drivers/ddr/fsl: fsl_ddr_sdram_size remove unused controllersEd Swarthout2016-01-251-0/+1
| | | | | | | | Following commit 61bd2f75, exclude unused DDR controller from calculating RAM size for SPL boot. Signed-off-by: Ed Swarthout <Ed.Swarthout@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* driver/ddr/fsl: Add workaround for A009663Shengzhou Liu2016-01-251-0/+10
| | | | | | | | | | | | Erratum A-009663 workaround requires to set DDR_INTERVAL[BSTOPRE] to 0 before setting DDR_SDRAM_CFG[MEM_EN] and set DDR_INTERVAL[BSTOPRE] to the desired value after DDR initialization has completed. When DDR controller is configured to operate in auto-precharge mode(DDR_INTERVAL[BSTOPRE]=0), this workaround is not needed. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
* fsl/ddr: Add workaround for ERRATUM_A009942Shengzhou Liu2016-01-251-0/+18
| | | | | | | | | | | | During the receive data training, the DDRC may complete on a non-optimal setting that could lead to data corruption or initialization failure. Workaround: before setting MEM_EN, set DEBUG_29 register with specific value for different data rates. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Add more SPDX-License-Identifier tagsTom Rini2016-01-1910-30/+10
| | | | | | | | | In a number of places we had wordings of the GPL (or LGPL in a few cases) license text that were split in such a way that it wasn't caught previously. Convert all of these to the correct SPDX-License-Identifier tag. Signed-off-by: Tom Rini <trini@konsulko.com>
* move erratum a008336 and a008514 to soc specific fileYao Yuan2015-12-151-34/+0
| | | | | | | | As the errata A008336 and A008514 do not apply to all LS series SoCs (such as LS1021A, LS1043A) we move them to an soc specific file Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* fsl/ddr: updated ddr errata-A008378 for arm and power SoCsShengzhou Liu2015-12-131-3/+6
| | | | | | | | | DDR errata-A008378 applies to LS1021-20-22A-R1.0, T1023-R1.0, T1024-R1.0, T1040-42-20-22-R1.0/R1.1, it has been fixed on LS102x Rev2. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Update timing config for heavy loadYork Sun2015-12-131-2/+24
| | | | | | | In case four chip-selects are all active, the turnaround times need to increase to avoid overlapping under heavy load. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Update workaround for A008511 for vref rangeYork Sun2015-12-131-7/+15
| | | | | | | The workaround requires different setting for range 1 vs 2. Also adjust timeout value for waiting for controller to be idle. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Update MR5 RTT parkYork Sun2015-12-131-4/+15
| | | | | | For four chip-selects enabled case, RTT is parked on all of them. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Update DDR4 MR6 for Vref rangeYork Sun2015-12-131-0/+3
| | | | | | MR6 bit 6 is set accrodingly for range 1 or 2, per JEDEC spec. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Update DDR4 RTT valuesYork Sun2015-12-131-2/+235
| | | | | | | DDR4 has different RTT value and code according to JEDEC spec. Update the macros and options . Signed-off-by: York Sun <yorksun@freescale.com>
* drivers/ddr/fsl: Fix typo in BIST test for DDR4York Sun2015-11-301-12/+12
| | | | | | | | | BIST test code has a typo, resulting the binding registers not maintained as expected. This typo results BIST runs twice on the covered memory. Signed-off-by: York Sun <yorksun@freescale.com> Reported-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* drivers/ddr/fsl: Enable detection of one DDR controller operation for LSCH3York Sun2015-11-302-0/+41
| | | | | | | | Freescale LSCH3 platforms use two DDR controlers interleaving mode out of reset. It can be configured to disable one controller. To support this operation, the driver needs to detect and skip the disabled controller. Signed-off-by: York Sun <yorksun@freescale.com>
* armv8: ls2085a: Add support of LS2085A SoCPrabhakar Kushwaha2015-11-301-2/+2
| | | | | | | | | | | | | Freescale's LS2085A is a another personality of LS2080A SoC with support of AIOP and DP-DDR. This Patch adds support of LS2085A Personality. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Updated MAINTAINERS files Dropped #ifdef in cpu.h Add CONFIG_SYS_NS16550=y in defconfig] Reviewed-by: York Sun <yorksun@freescale.com>
* armv8: LS2080A: Rename LS2085A to reflect LS2080APrabhakar Kushwaha2015-11-301-2/+2
| | | | | | | | | | | LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc. So renaming existing LS2085A code base to reflect LS2080A (Prime personality) Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Dropped #ifdef in cpu.c for cpu_type_list] Reviewed-by: York Sun <yorksun@freescale.com>
* Various Makefiles: Add SPDX-License-Identifier tagsTom Rini2015-11-101-3/+1
| | | | | | | | | | | After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* drivers/ddr/fsl_ddr: Make SR_IE configurableJoakim Tjernlund2015-10-301-1/+1
| | | | | | | | | SR_IE(Self-refresh interrupt enable) is needed for Hardware Based Self-Refresh. Make it configurable and let board code handle the rest. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@transmode.se> Reviewed-by: York Sun <yorksun@freescale.com>
* drivers/ddr/fsl: Adjust bstopre valueYork Sun2015-08-032-5/+7
| | | | | | | | | By default the bstopre value has been set to 0x100, used to be 1/4 value of refint. Modern DDR has increased the refresh time. Adjust to 1/4 of refresh interval dynamically. Individual board can still override this value in board ddr file, or to use auto-precharge. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Add a hook to update SPD addressYork Sun2015-07-201-0/+8
| | | | | | | | In case SPD address changes between board revisions, updating SPD address can be called from board file. Signed-off-by: York Sun <yorksun at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
* driver/ddr/fsl: Add workaround for DDR erratum A008511York Sun2015-04-231-1/+95
| | | | | | | | This erratum only applies to general purpose DDR controllers in LS2. It shouldn't be applied to DP-DDR controller. Check DDRC versoin number before applying workaround. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Add built-in memory test for DDR4 driverYork Sun2015-04-231-0/+73
| | | | | | | | | Add built-in memory test to catch errors after DDR is initialized, before any other transactions. To enable this test, define CONFIG_FSL_DDR_BIST. An environmental variable "ddr_bist" is checked before starting test. It takes a while (several seconds) depending on system memory size. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Fix driver to support empty first slotYork Sun2015-04-235-28/+56
| | | | | | | | CS0 was not allowed to be empty by u-boot driver in the past to simplify the driver. This may be inconvenient for some debugging. This patch lifts the restrictions. Controller interleaving still requires CS0 populated. Signed-off-by: York Sun <yorksun@freescale.com>
* drivers/ddr/fsl: Update DDR driver for DDR4York Sun2015-04-234-10/+88
| | | | | | | | | | Add/update registers for DDR4, including DQ mappings. Allow raw timing method used for all controllers. Update mode_9 register to 0x500 for improved stability. Check DDR controller version number individually in case a SoC has multiple DDR controllers of different versions. Increase read-write turnaround for DDR4 high speeds. Signed-off-by: York Sun <yorksun@freescale.com>
* MPC8541/MPC8555: Enable SS_EN in DDR_SDRAM_CLK_CNLT registerCurt Brune2015-04-201-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the MPC8555/MPC8541 reference manual the SS_EN (source synchronous enable) bit in the DDR_SDRAM_CLK_CNLT register must be set during initialization. >From section 9.4.1.8 of that manual: Source synchronous enable. This bit field must be set during initialization. See Section 9.6.1, "DDR SDRAM Initialization Sequence," details. 0 - Reserved 1 - The address and command are sent to the DDR SDRAMs source synchronously. In addition, Freescale application note AN2805 is also very clear that this bit must be set. This patch reverts a change introduced by commit 457caecdbca3df21a93abff19eab12dbc61b7897. Testing Done: Compiled targets CONFIG_TARGET_MPC8555CDS and CONFIG_TARGET_MPC8541CDS and inspected the generated assembly code to verify the SS_EN bit was being set. There is one extra instruction emitted: fff9b774: 65 29 80 00 oris r9,r9,32768 Compiled the CONFIG_TARGET_MPC8548CDS target and verified that no additional instructions were emitted related to this patch. Booted an image on a MPC8541 based board successfully. Signed-off-by: Curt Brune <curt@cumulusnetworks.com> Reviewed-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Add sync of refreshYork Sun2015-02-242-0/+59
| | | | | | | Add sync of refresh for multiple DDR controllers. DDRC initialization needs to complete first. Code is re-ordered to keep refresh close. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Fix a typo in timing_cfg_8 calculationYork Sun2015-02-241-1/+1
| | | | | | wwt_bg should match rrt_bg. It was a typo in driver. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Add support for multiple DDR clocksYork Sun2015-02-2412-152/+180
| | | | | | | | | Controller number is passed for function calls to support individual DDR clock, depending on SoC implementation. It is backward compatible with exising platforms. Multiple clocks have been verifyed on LS2085A emulator. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Add workround for erratumn A008514York Sun2015-02-241-5/+17
| | | | | | | Erratum A008514 workround requires writing register eddrtqcr1 with value 0x63b20002. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Add workaround for A008336York Sun2015-02-241-0/+22
| | | | | | | Erratum A008336 requires setting EDDRTQCR1[2] in DDRC DCSR space for 64-bit DDR controllers. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Adjust CAS to preamble override for emulatorYork Sun2015-02-241-1/+5
| | | | | | | | | On ZeBu emulator, CAS to preamble overrides need to be set to satisfy the timing. This only impact platforms with CONFIG_EMU. These should be set before MEM_EN is set. Signed-off-by: York Sun <yorksun@freescale.com>
* arm/ls1021a: Add workaround for DDR erratum A008378York Sun2015-01-231-0/+8
| | | | | | | Internal memory controller counters can reach a bad state after training in DDR4 mode if accumulated ECC or DBI mode is eanbled. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Fix MRC_CYC calculation for DDR3York Sun2014-12-151-1/+20
| | | | | | | | | | For DDR controller version 4.7 or newer, MRC_CYC (mode register set cycle time) is max(tMRD, tMOD). tMRD is 4nCK, or 8nCK (RDIMM). tMOD is max(12nCK, 15ns) according to JEDEC spec. DDR4 is not affected by this change. Signed-off-by: York Sun <yorksun@freescale.com>
* fsl/sleep: updated the deep sleep framework for QorIQ platformsTang Yuantian2014-12-113-53/+103
| | | | | | | | | | | | | With the introducing of generic board and ARM-based cores, current deep sleep framework doesn't work anymore. This patch will convert the current framework to adapt this change. Basically it does: 1. Converts all the Freescale's DDR driver to support deep sleep. 2. Added basic framework support for ARM-based and PPC-based cores separately. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Add workaround for faulty SPDYork Sun2014-12-051-0/+22
| | | | | | | Some UDIMMs have faulty SPD with wrong mapping for DQ[36-39]. Using raw card spec in case this error is detected. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Adjust timing_cfg_0 to better support two DDR slotsYork Sun2014-12-051-6/+25
| | | | | | | | | Increase write-to-write and read-to-read turnaround time for two-slot DDR configurations. Previously only quad-rank and two dual-rank configurations have this additional turnaround time. A recent test on two single-rank DIMMs shows the shorter additional turnaround time is also needed. Signed-off-by: York Sun <yorksun@freescale.com>
* linux/kernel.h: sync min, max, min3, max3 macros with LinuxMasahiro Yamada2014-11-233-38/+49
| | | | | | | | | | | | | | | | | | | | U-Boot has never cared about the type when we get max/min of two values, but Linux Kernel does. This commit gets min, max, min3, max3 macros synced with the kernel introducing type checks. Many of references of those macros must be fixed to suppress warnings. We have two options: - Use min, max, min3, max3 only when the arguments have the same type (or add casts to the arguments) - Use min_t/max_t instead with the appropriate type for the first argument Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [trini: Fixup arch/blackfin/lib/string.c] Signed-off-by: Tom Rini <trini@ti.com>
* driver/ddr/fsl: Fix DDR4 driverYork Sun2014-09-252-4/+8
| | | | | | | | | | | When accumulated ECC is enabled, the DQ_MAP for ECC[4:7] needs to be set to 0, i.e. 0->0, 1->1, etc., required by controller logic, even these pins are not actually connected. Also fix a bug when reading from DDR register to use proper accessor for correct endianess. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Fix tXP and tCKEYork Sun2014-09-253-12/+22
| | | | | | | | The driver was written using old DDR3 spec which only covers low speeds. The value would be suboptimal for higher speeds. Fix both timing according to latest DDR3 spec, remove tCKE as an config option. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr: Restruct driver to allow standalone memory spaceYork Sun2014-09-254-100/+205
| | | | | | | | | | U-boot has been initializing DDR for the main memory. The presumption is the memory stays as a big continuous block, either linear or interleaved. This change is to support putting some DDR controllers to separated space without counting into main memory. The standalone memory controller could use different number of DIMM slots. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Add support of overriding chip select write levelingYork Sun2014-09-082-0/+5
| | | | | | | | | | JEDEC spec allows DRAM vendors to use prime DQ for write leveling. This is not an issue unless some DQ pins are not connected. If a platform uses regular DIMMs but with reduced DDR ECC pins, the prime DQ may end up on those floating pins for the second rank. The workaround is to use a known good chip select for this purpose. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/freescale: Fix DDR3 driver for ARMYork Sun2014-09-081-1/+1
| | | | | | | Reading DDR register should use ddr_in32() for proper endianess. This patch fixes incorrect waiting time for ARM platforms. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/freescale: Add support of accumulate ECCYork Sun2014-09-081-0/+5
| | | | | | | | | If less than 8 ECC pins are used for DDR data bus width smaller than 64 bits, the 8-bit ECC code will be transmitted/received across several beats, and it will be used to check 64-bits of data once 8-bits of ECC are accumulated. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr: Fix DDR register timing_cfg_8York Sun2014-07-221-0/+3
| | | | | | | The field wrtord_bg should add 2 clocks if on the fly chop is enabled, according to DDR controller manual for DDR4. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr: Fix DDR4 driver for ARMYork Sun2014-07-221-2/+5
| | | | | | | Previously the driver was only tested on Power SoCs. Different barrier instructions are needed for ARM SoCs. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr/fsl: Fix printing unspecified module info for DDR4York Sun2014-06-051-1/+1
| | | | | | The offset of module information is at 128, different from DDR3. Signed-off-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Add workaround for DDR erratum A004508York Sun2014-06-051-0/+5
| | | | | | | | | | | When the DDR controller is initialized below a junction temperature of 0°C and then operated above a junction temperature of 65°C, the DDR controller may cause receive data errors, resulting ECC errors and/or corrupted data. This erratum applies to the following SoCs and their variants: MPC8536, MPC8569, MPC8572, P1010, P1020, P1021, P1022, P1023, P2020. Signed-off-by: York Sun <yorksun@freescale.com>
* Add cli_ prefix to readline functionsSimon Glass2014-05-291-3/+4
| | | | | | This makes it clear where the code resides. Signed-off-by: Simon Glass <sjg@chromium.org>
* move CLI prototypes to cli.h and add commentsSimon Glass2014-05-291-0/+1
| | | | | | | Move the CLI prototypes from common.h to cli.h as part of an effort to reduce the size of common.h. Signed-off-by: Simon Glass <sjg@chromium.org>
* mpc85xx/t104x: Add deep sleep framework supportTang Yuantian2014-04-221-4/+48
| | | | | | | | | | When T104x soc wakes up from deep sleep, control is passed to the primary core that starts executing uboot. After re-initialized some IP blocks, like DDRC, kernel will take responsibility to continue to restore environment it leaves before. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* drivers/ddr: Fix possible out of bounds errorYork Sun2014-04-223-58/+64
| | | | | | | | | This is a theoretical possible out of bounds error in DDR driver. Adding check before using array index. Also change some runtime conditions to pre-compiling conditions. Signed-off-by: York Sun <yorksun@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
OpenPOWER on IntegriCloud