summaryrefslogtreecommitdiffstats
path: root/doc
Commit message (Collapse)AuthorAgeFilesLines
* mtd: add altera quadspi driverThomas Chou2015-11-121-0/+35
| | | | | | | | Add Altera Generic Quad SPI Controller support. The controller converts SPI NOR flash to parallel flash interface. So it is not like other SPI flash, but rather like CFI flash. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
* cfi_flash: convert to driver modelThomas Chou2015-11-121-0/+88
| | | | | | | Convert cfi flash to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2015-11-101-3/+0
|\
| * Revive OpenRD targetsAlbert ARIBAUD2015-11-101-3/+0
| | | | | | | | | | | | | | | | | | | | Revert commit 7a2c1b13 which dropped OpenRD boards. Assume maintainership of OpenRD. Remove OpenRD from scrapyard. Switch OpenRD to generic board. Switch to Thumb build. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* | Various Makefiles: Add SPDX-License-Identifier tagsTom Rini2015-11-101-0/+3
|/ | | | | | | | | | | After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* dm: adc: add simple ADC uclass implementationPrzemyslaw Marczak2015-11-021-0/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds: - new uclass id: UCLASS_ADC - new uclass driver: drivers/adc/adc-uclass.c The new uclass's API allows for ADC operation on: * single-channel with channel selection by a number * multti-channel with channel selection by bit mask ADC uclass's functions: * single-channel: - adc_start_channel() - start channel conversion - adc_channel_data() - get conversion data - adc_channel_single_shot() - start/get conversion data * multi-channel: - adc_start_channels() - start selected channels conversion - adc_channels_data() - get conversion data - adc_channels_single_shot() - start/get conversion data for channels selected by bit mask * general: - adc_stop() - stop the conversion - adc_vdd_value() - positive reference Voltage value with polarity [uV] - adc_vss_value() - negative reference Voltage value with polarity [uV] - adc_data_mask() - conversion data bit mask The device tree can provide below constraints/properties: - vdd-polarity-negative: if true: Vdd = vdd-microvolts * (-1) - vss-polarity-negative: if true: Vss = vss-microvolts * (-1) - vdd-supply: phandle to Vdd regulator's node - vss-supply: phandle to Vss regulator's node And optional, checked only if the above corresponding, doesn't exist: - vdd-microvolts: positive reference Voltage [uV] - vss-microvolts: negative reference Voltage [uV] Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* dm: pmic: add s2mps11 PMIC I/O driverPrzemyslaw Marczak2015-11-021-0/+17
| | | | | | | | | | | | | | | | | | This driver allows I/O operations on the Samsung S2MPS11 PMIC, which provides lots of LDO/BUCK outputs. To enable it, update defconfig with: - CONFIG_PMIC_S2MPS11 and additional, if were not defined: - CONFIG_CMD_PMIC - CONFIG_ERRNO_STR The binding info: doc/device-tree-bindings/pmic/s2mps11.txt Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* s5p: cpu_info: print "cpu-model" if exists in dtsPrzemyslaw Marczak2015-11-021-0/+21
| | | | | | | | | | | | | | | | | | | | The CPU name for Exynos was concatenated with cpu id, but for new Exynos platforms, like Chromebook Peach Pi based on Exynos5800, the name of SoC variant does not include the real SoC cpu id (0x5422). For such case, the CPU name should be defined in device tree. This commit introduces new device-tree property for Exynos: - "cpu-model" - with cpu name string If defined, then the cpu id is not printed. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-10-302-2/+8
|\
| * armv8/ls1043a: Add Fman supportShaohui Xie2015-10-291-2/+2
| | | | | | | | | | | | | | | | Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * common/board_f.c: change the macro name and remove it for PPC platformsGong Qianyu2015-10-291-0/+6
| | | | | | | | | | | | | | | | | | | | For most PPC platforms, they will call the first get_clocks() in init_sequence_f[] as they define CONFIG_PPC. CONFIG_SYS_FSL_CLK is then defined to call the second get_clocks(), which should be redundant for PPC. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | README.scrapyard: Populate recent ppc4xx removalsTom Rini2015-10-301-4/+4
| | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2015-10-281-0/+26
|\ \
| * | doc: device-tree-bindings: spi: Add zynq qspi infoJagan Teki2015-10-251-0/+26
| |/ | | | | | | | | | | | | | | | | | | | | Added device-tree-binding information for zynq qspi controller driver. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Simon Glass <sjg@chromium.org> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Jagan Teki <jteki@openedev.com>
* | Merge git://www.denx.de/git/u-boot-ppc4xxTom Rini2015-10-271-0/+4
|\ \
| * | ocotea: DropTom Rini2015-10-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board has not compiled for me for quite some time due to size constraints, remove. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | taishan: DropTom Rini2015-10-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board has not compiled for me for quite some time due to size constraints, remove. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | ebony: DropTom Rini2015-10-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board has not compiled for me for quite some time due to size constraints, remove. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | taihu: RemoveTom Rini2015-10-271-0/+1
| |/ | | | | | | | | | | | | | | | | | | This board has not compiled for me for quite some time due to size constraints, remove. Cc: John Otken <jotken@softadvances.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge git://git.denx.de/u-boot-dmTom Rini2015-10-272-3/+6
|\ \ | |/ |/|
| * env: export fdt_blob to the environment variableThomas Chou2015-10-231-1/+4
| | | | | | | | | | | | | | | | Export fdt_blob to the environment variable. So that we may use it to boot Linux. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Simon Glass <sjg@chromium.org>
| * dm: Rename dev_get_parentdata() to dev_get_parent_priv()Simon Glass2015-10-231-2/+2
| | | | | | | | | | | | | | | | The current name is inconsistent with other driver model data access functions. Rename it and fix up all users. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
* | net: convert altera_tse to driver model and phylibThomas Chou2015-10-231-0/+112
| | | | | | | | | | | | | | | | Convert altera_tse to driver model and phylib. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* | nios2: add README.nios2Thomas Chou2015-10-231-0/+95
| | | | | | | | | | | | | | Add README.nios2 about how to add nios2 boards to u-boot. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de>
* | nios2: convert altera sysid to driver modelThomas Chou2015-10-231-0/+4
| | | | | | | | | | | | | | | | Convert altera sysid to driver model with misc uclass. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Chin Liang See <clsee@altera.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | nios2: convert altera timer to driver modelThomas Chou2015-10-231-0/+19
| | | | | | | | | | | | | | Convert altera timer to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Chin Liang See <clsee@altera.com>
* | nios2: convert nios2 cpu to driver modelThomas Chou2015-10-231-0/+54
| | | | | | | | | | | | | | | | | | Convert nios2 cpu to driver model. The cpu parameters are extracted from device tree and saved to global data structure. We will use them to replace the custom_fpga.h . Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org>
* | nios2 : convert altera_pio to driver modelThomas Chou2015-10-231-0/+28
| | | | | | | | | | | | | | | | Convert altera_pio to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Chin Liang See <clsee@altera.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | spi : convert altera_spi to driver modelThomas Chou2015-10-231-0/+4
| | | | | | | | | | | | | | Convert altera_spi to driver model Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | nios2: convert altera_uart to driver modelThomas Chou2015-10-231-0/+7
| | | | | | | | | | | | | | | | Convert altera_uart to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
* | nios2: convert altera_jtag_uart to driver modelThomas Chou2015-10-231-0/+4
|/ | | | | | | | Convert altera_jtag_uart to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* drivers: Introduce a simplified remoteproc frameworkNishanth Menon2015-10-222-0/+182
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many System on Chip(SoC) solutions are complex with multiple processors on the same die dedicated to either general purpose of specialized functions. Many examples do exist in today's SoCs from various vendors. Typical examples are micro controllers such as an ARM M3/M0 doing a offload of specific function such as event integration or power management or controlling camera etc. Traditionally, the responsibility of loading up such a processor with a firmware and communication has been with a High Level Operating System(HLOS) such as Linux. However, there exists classes of products where Linux would need to expect services from such a processor or the delay of Linux and operating system being able to load up such a firmware is unacceptable. To address these needs, we need some minimal capability to load such a system and ensure it is started prior to an Operating System(Linux or any other) is started up. NOTE: This is NOT meant to be a solve-all solution, instead, it tries to address certain class of SoCs and products that need such a solution. A very simple model is introduced here as part of the initial support that supports microcontrollers with internal memory (no MMU, no execution from external memory, or specific image format needs). This basic framework can then (hopefully) be extensible to other complex SoC processor support as need be. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Enable mrc cache for bayleybay and minnowmaxBin Meng2015-10-211-0/+1
| | | | | | | | | | | | Now that we have added MRC cache for Intel FSP and BayTrail codes, enable it for all BayTrail boards (Bayley Bay and Minnow Max). Note it turns out that FSP for Intel Atom E6xx does not produce the HOB for NV storage, so we don't have such functionality on Intel Crown Bay board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Make hob command a sub-command to fspBin Meng2015-10-211-3/+2
| | | | | | | | | Introduce a new fsp command and make the existing hob command a sub-command to fsp for future extension. Also move cmd_hob.c to the dedicated fsp sub-directory in arch/x86/lib. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add SMBIOS table supportBin Meng2015-10-211-2/+0
| | | | | | | | | | | | System Management BIOS (SMBIOS) is a specification for how motherboard and system vendors present management information about their products in a standard format by extending the BIOS interface on Intel architecture systems. As of today the latest spec is 3.0 and can be downloaded from DMTF website. This commit adds a simple and minimum required implementation. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* doc: Complement document about booting VxWorksBin Meng2015-10-212-8/+76
| | | | | | | | Current document about how to boot VxWorks is limited. Add several chapters in README.vxworks to document this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* doc/README.scrapyard: Add more entriesTom Rini2015-10-191-0/+71
| | | | | | | - Add deletions from August 30 2015. - A few from Sept 12, one from Oct 2nd. Signed-off-by: Tom Rini <trini@konsulko.com>
* doc/README.scrapyard: Populate recent removalsTom Rini2015-10-191-9/+9
| | | | | | Add in the commit IDs / dates for boards removed on Sept 2nd. Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: uniphier: fix address mapping in README.uniphierMasahiro Yamada2015-10-151-4/+4
| | | | Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Revert "powerpc: ppc4xx: remove lwmon5 support"Stefan Roese2015-10-111-1/+0
| | | | | | | | | | This reverts commit 8fe11b8901a31d11990488c82bc23612589d57be. I'll add support to lwmon5 in the next patch and will remove support for the broken lcd4_lwmon5 as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: add ProXstream2 and PH1-LD6b supportMasahiro Yamada2015-09-251-0/+8
| | | | | | | The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: add PH1-Pro5 supportMasahiro Yamada2015-09-251-0/+4
| | | | | | | The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* x86: doc: Add DMI to the TODO listBin Meng2015-09-161-0/+2
| | | | | | | | Desktop Management Interface (DMI) is not supported by U-Boot now. Add it to the TODO list. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: doc: Document some porting hints about Intel QuarkBin Meng2015-09-161-0/+24
| | | | | | | | Document porting considerations for Intel Quark based board, including MRC parameters and PCIe initialization. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* arm: Remove vision2 boardSimon Glass2015-09-111-0/+1
| | | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stefano Babic <sbabic@denx.de>
* arm: Remove omap3_mvblx boardSimon Glass2015-09-111-4/+0
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove enbw_cmc boardSimon Glass2015-09-111-25/+0
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* git-mailrc: add Alexey as ARC maintainerMasahiro Yamada2015-09-111-1/+4
| | | | | | It's easier to Cc him on ARC-releated patches. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* x86: doc: Change to use CONFIG_VGA_BIOS_ADDRBin Meng2015-09-091-1/+1
| | | | | | | | | CONFIG_X86_OPTION_ROM_ADDR has been renamed to CONFIG_VGA_BIOS_ADDR. Update the doc to refer to the new name. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* doc: dfu: tftp: README entry for TFTP extension of DFULukasz Majewski2015-09-072-0/+121
| | | | | | | | | | Documentation file for DFU extension. With this functionality it is now possible to transfer FIT images with firmware updates via TFTP and use DFU backend for storing them. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
OpenPOWER on IntegriCloud