summaryrefslogtreecommitdiffstats
path: root/cpu
Commit message (Collapse)AuthorAgeFilesLines
* * Patch by Vladimir Gurevich, 04 Jun 2003:wdenk2003-06-051-13/+54
| | | | make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
* - Fix bug for initial stack in data cache as pointed out by Thomas Schaefer ↵stroese2003-06-051-7/+92
| | | | (tschaefer@giga-stream.de). Now inital stack in data cache can be used even if the chip select is in use.
* * Patch by Denis Peter, 04 June 2003:wdenk2003-06-042-5/+8
| | | | add support for the MIP405T board
* * Patches by Udi Finkelstein, 2 June 2003:wdenk2003-06-039-25/+82
| | | | | | | | | | | | | | | | | | | | | | - Added support for custom keyboards, initialized by defining a board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD . - Added support for the RBC823 board. - cpu/mpc8xx/lcd.c now automatically calculates the Horizontal Pixel Count field. * Fix alignment problem in BOOTP (dhcp_leasetime option) [pointed out by Nicolas Lacressonnière, 2 Jun 2003] * Patch by Mark Rakes, 14 May 2003: add support for Intel e1000 gig cards. * Patch by Nye Liu, 3 Jun 2003: fix critical typo in MAMR definition (include/mpc8xx.h) * Fix requirement to align U-Boot image on 16 kB boundaries on PPC. * Patch by Klaus Heydeck, 2 Jun 2003 Minor changes for KUP4K configuration
* * Patch by Marc Singer, 29 May 2003:wdenk2003-05-3110-115/+1189
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed rarp boot method for IA32 and other little-endian CPUs. * Patch by Marc Singer, 28 May 2003: Added port I/O commands. * Patch by Matthew McClintock, 28 May 2003 - cpu/mpc824x/start.S: fix relocation code when booting from RAM - minor patches for utx8245 * Patch by Daniel Engström, 28 May 2003: x86 update * Patch by Dave Ellis, 9 May 2003 + 27 May 2003: add nand flash support to SXNI855T configuration fix/extend nand flash support: - fix 'nand erase' command so does not erase bad blocks - fix 'nand write' command so does not write to bad blocks - fix nand_probe() so handles no flash detected properly - add doc/README.nand - add .jffs2 and .oob options to nand read/write - add 'nand bad' command to list bad blocks - add 'clean' option to 'nand erase' to write JFFS2 clean markers - make NAND read/write faster * Patch by Rune Torgersen, 23 May 2003: Update for MPC8266ADS board
* * Get (mostly) rid of CFG_MONITOR_LEN definition; compute real lengthwdenk2003-05-307-51/+22
| | | | | | | | instead CFG_MONITOR_LEN is now only used to determine _at_compile_ _time_ (!) if the environment is embedded within the U-Boot image, or in a separate flash sector. * Cleanup CFG_DER #defines in config files (wd maintained only)
* * Fix data abort exception handling for arm920t CPUwdenk2003-05-281-4/+2
| | | | | | | | | | | | * Fix alignment problems with flash driver for TRAB board * Patch by Donald White, 21 May 2003: fix calculation of base address in pci_hose_config_device() * Fix bug in command line parsing: "cmd1;cmd2" is supposed to always execute "cmd2", even if "cmd1" fails. Note that this is different to "run var1 var2" where the contents of "var2" will NOT be executed when a command in "var1" fails.
* Patch by Kyle Harris, 20 May 2003:wdenk2003-05-237-0/+0
| | | | | In preparation for an ixp port, rename cpu/xscale and arch-xscale into cpu/pxa and arch-pxa.
* - PPC405EP support added.stroese2003-05-231-66/+103
| | | | - CONFIG_UART1_CONSOLE added (see README).
* PPC405EP support added.stroese2003-05-238-21/+404
|
* * Patch by Dave Ellis, 22 May 2003:wdenk2003-05-228-45/+200
| | | | | | | | Fix problem with only partially cleared .bss segment * Patch by Rune Torgersen, 12 May 2003: get PCI to work on a MPC8266ADS board; incorporate change to cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
* Add support for CompactFlash on ATC boardwdenk2003-05-181-0/+4
| | | | | (includes support for Intel 82365 and compatible PC Card controllers, and Yenta-compatible PCI-to-CardBus controllers)
* * Add support for Promess ATC boardwdenk2003-05-033-1/+448
| | | | | | | | | | | | | | * Patch by Keith Outwater, 28 Apr 2003: - Miscellaneous corrections and additions to GEN860T board specific code. - Added GEN860_SC variant to GEN860T. - Miscellaneous corrections to GEN860T documentation. - Correct duplicate entry in U-Boot CREDITS file. - Add GEN860T_SC entry in MAINTAINERS file. - Update CREDITS file with GEN860T_SC info. * Update Smiths Aerospace addresses in MAINTAINERS file * Fix error handling in hush's version of "run" command
* * LWMON extensions:wdenk2003-04-275-6/+37
| | | | | | | | | | | - Splashscreen support - modem support - sysmon support - temperature dependend enabling of LCD * Allow booting from old "PPCBoot" disk partitions * Add support for TQM8255 Board / MPC8255 CPU
* Compile fixeswdenk2003-04-201-99/+3
|
* * Make sure Block Lock Bits get cleared in R360MPI flash driverwdenk2003-04-201-4/+213
| | | | | | | | | | | | | | * MPC823 LCD driver: Fill color map backwards, to allow for steady display when Linux takes over * Patch by Erwin Rol, 27 Feb 2003: Add support for RTEMS (this time for real). * Add support for "bmp info" and "bmp display" commands to load bitmap images; this can be used (for example in a "preboot" command) to display a splash screen very quickly after poweron. * Add support for 133 MHz clock on INCA-IP board
* * Patch by Lutz Dennig, 10 Apr 2003:wdenk2003-04-121-11/+18
| | | | | | | | | | | | | Update for R360MPI board * Add new meaning to "autostart" environment variable: If set to "no", a standalone image passed to the "bootm" command will be copied to the load address (and eventually uncompressed), but NOT be started. This can be used to load and uncompress arbitrary data. * Set max brightness for MN11236 displays on TRAB board
* Add support for TQM862L moduleswdenk2003-04-102-2/+2
|
* Prepare for 0.3.0 releasewdenk2003-04-081-2/+7
| | | | | | * Add support for Purple Board (MIPS64 5Kc) * Add support for MIPS64 5Kc CPUs
* * Patch by Arun Dharankar, 4 Apr 2003:wdenk2003-04-055-10/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add IDMA example code (tested on 8260 only) * Add support for Purple Board (MIPS64 5Kc) * Add support for MIPS64 5Kc CPUs * Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS * Patch by Denis Peter, 04 Apr 2003: - update MIP405-4 board * Patches by Denis Peter, 03 April 2003: - fix PCI IRQs on MPL boards - fix two more un-relocated pointer problems * Fix behaviour of "run" command: - print error message iv variable does not exist - terminate processing of arguments in case of error * Patches by Peter Figuli, 10 Mar 2003 - Add support for BTUART on PXA platform - Add support for WEP EP250 (PXA) board * Fix flash problems on INCA-IP; add tool to allow bruning images to flash using a BDI2000 * Implement fix for I2C Edge Conditions problem for all boards that use the bit-banging driver (common/soft_i2c.c) * Add patches by Robert Schwebel, 31 Mar 2003: - csb226 board: bring in sync with innokom/memsetup.S - csb226 board: fix MDREFR handling - misc doc fixes / extensions - innokom board: cleanup, MDREFR fix in memsetup.S, config update - add BOOT_PROGRESS to armlinux.c
* Changed PPC405GPr version from A to B.stroese2003-04-043-5/+5
|
* * Patch by Martin Winistoerfer, 23 Mar 2003wdenk2003-03-3110-0/+1891
| | | | | | | | | - Add port to MPC555/556 microcontrollers - Add support for cmi customer board with Intel 28F128J3A, 28F320J3A or 28F640J3A flash. * Patch by Rick Bronson, 28 Mar 2003: - fix common/cmd_nand.c
* * Patch by Arun Dharankar, 24 Mar 2003:wdenk2003-03-313-3/+3
| | | | | | | | | | - add threads / scheduler example code * Add patches by Robert Schwebel, 31 Mar 2003: - add ctrl-c support for kermit download - align bdinfo output on ARM * Add CPU ID, version, and clock speed for INCA-IP
* * Add support for MIPS32 4Kc CPUswdenk2003-03-2710-0/+1399
| | | | * Add support for INCA-IP Board
* * Patch by Rick Bronson, 16 Mar 2003:wdenk2003-03-268-7/+930
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Atmel AT91RM9200DK w/NAND * Patches by Robert Schwebel, 19 Mar 2003: - use arm-linux-gcc as default compiler for ARM - fix i2c fixup code - fix missing baudrate setting - added $loadaddr / CFG_LOAD_ADDR support to loadb - moved "ignoring trailing characters" _before_ u-boot wants to print out diagnostics messages; removes bogus characters at the end of transmission * Patch by John Zhan, 18 Mar 2003: Add support for SinoVee Microsystems SC8xx boards * Patch by Rolf Offermanns, 21 Mar 2003: ported the dnp1110 related changes from the current armboot cvs to current u-boot cvs. smc91111 does not work. problem marked in smc91111.c, grep for "FIXME". * Patch by Brian Auld, 25 Mar 2003: Add support for STM flash chips on ebony board * Add PCI support for MPC8250 Boards (PM825 module) * Patch by Stefan Roese, 25 Mar 2003:
* Add PCI support for MPC8250 Boards (PM825 module)wdenk2003-03-252-1/+245
|
* Clip udiv to 5 bits on PPC405 (serial.c).stroese2003-03-201-0/+2
|
* Set edge conditioning circuitry on PPC405GPr for compatibility to existing ↵stroese2003-03-201-0/+10
| | | | PPC405GP designs.
* * Avoid flicker on the TRAB's VFD by synchronizing the enable withwdenk2003-03-142-3/+8
| | | | | | | | | | | | | | | | | | | the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100 boards, version 153 for Rev. 200 boards). * Patch by Vladimir Gurevich, 12 Mar 2003: Fix relocation problem of statically initialized string pointers in common/cmd_pci.c * Patch by Kai-Uwe Blöm, 12 Mar 2003: Cleanup & bug fixes for JFFS2 code: - the memory mangement was broken. It caused havoc on malloc by writing beyond the block boundaries. - the length calculation for files was wrong, sometimes resulting in short file reads. - data copying now optionally takes fragment version numbers into account, to avoid copying from older data. See doc/README.JFFS2 for details.
* * Patch by Josef Wagner, 12 Mar 2003:wdenk2003-03-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | - 16/32 MB and 50/80 MHz support with auto-detection for IP860 - ETH05 and BEDBUG support for CU824 - added support for MicroSys CPC45 - new BOOTROM/FLASH0 and DOC base for PM826 * Patch by Robert Schwebel, 12 Mar 2003: Fix the chpart command on innokom board * Name cleanup: mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h s/PPCBoot/U-Boot/ in some files s/pImage/uImage/ in some files * Patch by Detlev Zundel, 15 Jan 2003: Fix '' command line quoting * Patch by The LEOX team, 19 Jan 2003: - add support for the ELPT860 board - add support for Dallas ds164x RTC
* * Patches by David Müller, 31 Jan 2003:wdenk2003-03-063-30/+65
| | | | | | | | | | | | | | | | | - minimal setup for CardBus bridges - add EEPROM read/write support in the CS8900 driver - add support for the builtin I2C controller in the Samsung s3c24x0 chips - add support for MPL's VCMA9 (Samsung s3c2410 based) board * Patch by Steven Scholz, 04 Feb 2003: add support for RTC DS1307 * Patch by Reinhard Meyer, 5 Feb 2003: fix PLPRCR/SCCR init sequence on 8xx to allow for changes of EBDF by software * Patch by Vladimir Gurevich, 07 Feb 2003: "API-compatibility patch" for 4xx I2C driver
* * Patches by Robert Schwebel, 06 Mar 2003:wdenk2003-03-066-1/+63
| | | | | | | | | | | - fix bug in BOOTP code (must use NetCopyIP) - update of CSB226 port - clear BSS segment on XScale - added support for i2c_init_board() function - update to the Innokom plattform * Extend support for redundand environments for configurations where environment size < sector size
* * Patch by Rune Torgersen, 13 Feb 2003:wdenk2003-03-061-48/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Motorola MPC8266ADS board * Patch by Kyle Harris, 19 Feb 2003: patches for the Intel lubbock board: memsetup.S - general cleanup (based on Robert's csb226 code) flash.c - overhaul, actually works now lubbock.c - fix init funcs to return proper value * Patch by Kenneth Johansson, 26 Feb 2003: - Fixed off by one in RFTA calculation. - No need to abort when LDF is lower than we can program it's only minimum timing so clamp it to what we can do. - Takes function pointer to function for reading the spd_nvram. Usefull for faking data or hardcode a module without the nvram. - fix other user for above change - fix some comments. * Patches by Brian Waite, 26 Feb 2003: - fix port for evb64260 board - fix PCI for evb64260 board - fix PCI scan * Patch by Reinhard Meyer, 1 Mar 2003: Add support for EMK TOP860 Module * Patch by Yuli Barcohen, 02 Mar 2003: Add SPD EEPROM support for MPC8260ADS board
* * Patch by Robert Schwebel, 21 Jan 2003:wdenk2003-03-065-3/+474
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add support for Innokom board - Don't complain if "install" fails - README cleanup (remove duplicated lines) - Update PXA header files * Add documentation for existing POST code (doc/README.POST) * Patch by Laudney Ren, 15 Jan 2003: Fix handling of redundand environment in "tools/envcrc.c" * Patch by Detlev Zundel, 28 Feb 2003: Add bedbug support for 824x systems * Add support for 16 MB flash configuration of TRAB board * Patch by Erwin Rol, 27 Feb 2003: Add support for RTEMS * Add image information to README * Fix dual PCMCIA slot support (when running with just one slot populated) * Add VFD type detection to trab board * extend drivers/cs8900.c driver to synchronize ethaddr environment variable with value in the EEPROM
* Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).stroese2003-02-171-1/+1
|
* Add "pcidelay" environment variable (in ms, enabled via CONFIG_PCI_BOOTDELAY).stroese2003-02-141-2/+2
|
* Cleanup: remove trailing white spacewdenk2003-02-111-5/+5
|
* Added 4MByte and 128MByte onboard SDRAMstroese2003-02-101-4/+105
|
* * Add dual ethernet support on PM826wdenk2003-01-171-44/+91
| | | | | | | | | | * Add support for LXT971 PHY on PM826 * Patch by Tord Andersson, 16 Jan 2003: Fix flash sector count for TQM8xxL * Fix I2C EEPROM problem on ICU862 board (would only write the first 16 bytes out of each 32 byte block)
* Add support for V37 boardwdenk2003-01-131-0/+25
| | | | (patch by Jón Benediktsson, 11 Dec 2002)
* * Restrict baudrate settings on LWMON to higher speedswdenk2003-01-112-19/+16
| | | | | | | | | | | | when watchdog is on * Update baudrate in bd_info when it gets changed * Add watchdog trigger points while waiting for serial port (so far only 8xx -- needed on LWMON with 100ms watchdog) * Improve command line tool to access the U-Boot's environment (figuration of the utility, using a config file)
* * Patch by Hans-Joerg Frieden, 06 Dec 2002wdenk2002-12-079-119/+239
| | | | | | | | | | | | | | | | | | | Fix misc problems with AmigaOne support * Patch by Chris Hallinan, 3 Dec 2002: minor cleanup to the MPC8245 EPIC driver * Patch by Pierre Aubert , 28 Nov 2002 Add support for external (SIU) interrupts on MPC8xx * Patch by Pierre Aubert , 28 Nov 2002 Fix nested syscalls bug in standalone applications * Patch by David Müller, 27 Nov 2002: fix output of "pciinfo" command for CardBus bridge devices. * Fix bug in TQM8260 board detection - boards got stuck when board ID was not readable
* * Patch by Thomas Frieden, 13 Nov 2002:wdenk2002-11-194-4/+42
| | | | | | | | | | | | | Add code for AmigaOne board (preliminary merge to U-Boot, still WIP) * Patch by Jon Diekema, 12 Nov 2002: - Adding URL for IEEE OUI lookup - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED being defined. - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and root-on-nfs macros are designed to switch how the default boot method gets defined.
* * Patch by Daniel Engström, 13 Nov 2002:wdenk2002-11-189-0/+1733
| | | | | | | Add support for i386 architecture and AMD SC520 board * Patch by Pierre Aubert, 12 Nov 2002: Add support for DOS filesystem and booting from DOS floppy disk
* * Patch by Jim Sandoz, 07 Nov 2002:wdenk2002-11-112-8/+15
| | | | | | | | | | Increase number of network RX buffers (PKTBUFSRX in "include/net.h") for EEPRO100 based boards (especially SP8240) which showed "Receiver is not ready" errors when U-Boot was processing the receive buffers slower than the network controller was filling them. * Get rid of obsolete include/mpc74xx.h
* * Vince Husovsky, 7 Nov 2002:wdenk2002-11-104-3/+10
| | | | | | | | | | | | | | | | | | | | | Add "-n" to linker options to get rid of "Not enough room for program headers" problem * Patch by David Müller, 05 Nov 2002 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ so we can use an already existing name * Patch by Pierre Aubert, 05 Nov 2002 Hardware related improvements in FDC boot code * Patch by Holger Schurig, 5 Nov 2002: Make the PXA really change it's frequency * Patch by Pierre Aubert, 05 Nov 2002 Add support for slave serial Spartan 2 FPGAs * Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet drivers
* * Patch by Robert Schwebel, 04 Nov 2002:wdenk2002-11-051-75/+93
| | | | | | | | - use watchdog to reset PXA250 systems - added progress callbacks to (some of the) ARM code - update for Cogent CSB226 board * Add support for FPS860 board
* Patch by Guillaume Alexandre,, 04 Nov 2002:wdenk2002-11-041-8/+0
| | | | | | | | Improve PCI access on 32-bits Compact PCI bus Adjust VFD initialization on TRAB Cleanup RRvision video code
* * Fix mdelay() on TRAB - this was still the debugging version withwdenk2002-11-031-8/+7
| | | | | | | | | seconds instead of ms. * Patch by Robert Schwebel, 1 Nov 2002: XScale related cleanup (affects all ARM boards) * Cleanup of names, warnings and README.
* Initial revisionwdenk2002-11-031-0/+1425
|
OpenPOWER on IntegriCloud