summaryrefslogtreecommitdiffstats
path: root/cpu/mpc85xx
Commit message (Collapse)AuthorAgeFilesLines
* 85xx: Don't icbi when unlocking the cacheKumar Gala2008-02-271-5/+2
| | | | | | | | | There is no reason to icbi when invalidating the temporary stack in the d-cache. Its impossible on e500 to have the i-cache contain any addresses in the temp stack and it can be problematic in generating transactions on the bus to non-valid addresses. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Fix source for ECM error IVPRAndy Fleming2008-02-271-1/+1
| | | | | | | | The source vector for the ECM was being set to 2, but that's what the source vector for DDR was being set to. Change it to 1. Signed-off-by: Andy Fleming <afleming@freescale.com>
* Invalidate INIT_RAM TLB mappingsAndy Fleming2008-02-271-0/+11
| | | | | | | | | | | | | | | Commit 0db37dc... (and some others) changed the INIT_RAM TLB mappings to be unguarded. This collided with an existing "bug" where the mappings for the INIT_RAM were being kept around. This meant that speculative loads to those addresses were succeeding in the TLB, and going out to the bus, where they were causing an exception (there's nothing at that address). The Flash code was coincidentally causing such a speculative load. Rather than go back to mapping the INIT RAM as guarded, we fix it so that the entries for the INIT_RAM are invalidated. Thus the speculative loads will fail in the TLB, and have no effect. Signed-off-by: Andy Fleming <afleming@freescale.com>
* 85xx, 86xx: Determine I2C clock frequencies and store in global_dataTimur Tabi2008-02-141-0/+3
| | | | | | | | | Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx. Update the get_clocks() function in 85xx and 86xx to determine the I2C clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk. Signed-off-by: Timur Tabi <timur@freescale.com>
* PPC: Use r2 instead of r29 as global data pointerWolfgang Denk2008-02-141-1/+2
| | | | | | | | | | | | R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc will refuse to use load/store multiple insns; instead, it issues a list of simple load/store instructions upon function entry and exit, resulting in bigger code size, which in turn makes the build for a few boards fail. Use r2 instead. Signed-off-by: Wolfgang Denk <wd@denx.de>
* ppc: Refactor cache routines, so there is only one common set.Rafal Jaworowski2008-02-141-45/+0
| | | | Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
* QE: Move FDT support into a common fileKumar Gala2008-02-121-5/+3
| | | | | | | Move the flat device tree setup for QE related devices into a common file shared between 83xx & 85xx platforms that have QE's. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Coding Style Cleanup; update CHANGELOGWolfgang Denk2008-01-231-1/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* 85xx: Get ride of old TLB setup codeKumar Gala2008-01-172-22/+0
| | | | | | | Now that all boards have been converted, remove old config code and the config option for the new style. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Reworked initial processor initKumar Gala2008-01-172-72/+115
| | | | | | | | | | | | | | | | | | | Reworked the initial processor initialzation sequence: * introduced cpu_early_init_f that is run in address space 1 (AS=1) * Moved TLB/LAW and CCSR init into cpu_early_init_f() * Reworked initial asm code to do most of the core init before TLBs The main reasons for these changes are to allow handling of 36-bit phys addresses in the future and some of the issues that will exist when we do that. There are a few caveats on what can be initialized via the LAW and TLB static tables: * TLB entry 14/15 can't be initialized via the TLB table * any LAW that covers the implicit boot window (4G-8M to 4G) must map to the code that is currently executing. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Introduce new tlb APIKumar Gala2008-01-173-14/+99
| | | | | | | | | | Add a set of functions to manipulate TLB entries: * set_tlb() - write a tlb entry * invalidate_tlb() - invalidate a tlb array * disable_tlb() - disable a variable size tlb entry * init_tlbs() - setup initial tlbs based on static table Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Remove old style of LAW initKumar Gala2008-01-162-28/+0
| | | | | | All boards are now using the new fsl_law code so we can drop the old version. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Move LAW init code into CKumar Gala2008-01-163-0/+18
| | | | | | | | | | | Move the initialization of the LAWs into C code and provide an API to allow modification of LAWs after init. Board code is responsible to provide a law_table and num_law_entries. We should be able to use the same code on 86xx as well. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Add QE brg freq and correct qe bus freq fdt update codeKim Phillips2008-01-091-1/+3
| | | | | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* 85xx: add ability to upload QE firmwareTimur Tabi2008-01-091-0/+1
| | | | | | | | | | | Define the layout of a binary blob that contains a QE firmware and instructions on how to upload it. Add function qe_upload_firmware() to parse the blob and perform the actual upload. Add command-line command "qe fw" to take a firmware blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define 'struct rsp' in immap_qe.h to include the actual RISC Special Registers. Signed-off-by: Timur Tabi <timur@freescale.com>
* 85xx: Remove cache config from configs.hKumar Gala2008-01-091-2/+7
| | | | | | | | | Either use the standard defines in asm/cache.h or grab the information at runtime from the L1CFG SPR. Also, minor cleanup in cache.h to make the code a bit more readable. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Reworked FSL Book-E TLB macros to be more readableKumar Gala2008-01-091-13/+10
| | | | | | | | | | | The old macros made it difficult to know what WIMGE and perm bits were set for a TLB entry. Actually use the bit masks for these items since they are only a single bit. Also moved the macros into mmu.h out of e500.h since they aren't specific to e500. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Handle Asynchronous DDR clock on 85xxKumar Gala2007-12-113-4/+43
| | | | | | | | | | The MPC8572 introduces the concept of an asynchronous DDR clock with regards to the platform clock. Introduce get_ddr_freq() to report the DDR freq regardless of sync/async mode. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Stop using immap_t on 85xxKumar Gala2007-12-116-32/+18
| | | | | | | | In the future the offsets to various blocks may not be in same location. Move to using CFG_MPC85xx_*_ADDR as the base of the registers instead of getting it via &immap. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdtKumar Gala2007-12-112-123/+0
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Stop using immap_t for cpm offset on 85xxKumar Gala2007-12-115-66/+63
| | | | | | | | In the future the offsets to various blocks may not be in same location. Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers instead of getting it via &immap->im_cpm. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Stop using immap_t for guts offset on 85xxKumar Gala2007-12-114-6/+5
| | | | | | | | In the future the offsets to various blocks may not be in same location. Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers instead of getting it via &immap->im_gur. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Add libfdt based ft_cpu_setup for mpc85xxKumar Gala2007-12-112-1/+67
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Cleanup coding style; update CHANGELOGWolfgang Denk2007-11-031-2/+2
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Setting MSR[DE] in do_reseturwithsughosh@gmail.com2007-10-191-1/+6
| | | | | | | | Hello, This patch ensures the soft reset of the board for the 85xx boards by setting the MSR[DE] in the do_reset function. Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
* MSR overwrite fixurwithsughosh@gmail.com2007-10-191-8/+3
| | | | | | | | Hello, This patch fixes the MSR overwrite in the start.S when moving out of the last 4K page. Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
* Remove magic numbers from cache related operations for mpc85xxKumar Gala2007-10-191-4/+4
| | | | | | | The mpc85xx start code uses some magic numbers that we actually have #defines for in <config.h> so use those instead. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx io out functions need sync after write.Ed Swarthout2007-09-261-0/+5
| | | | | | This fixes the mc146818 rtc_read/write functions for 85xx. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
* Enable L2 cache for MPC8568MDS boardHaiying Wang2007-08-291-1/+1
| | | | | | The L2 cache size is 512KB for 8568, print out the correct informaiton. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* 85xxCDS: Add make targets for legacy systems.Randy Vinson2007-08-141-1/+1
| | | | | | | | The PCI ID select values on the Arcadia main board differ depending on the version of the hardware. The standard configuration supports Rev 3.1. The legacy target supports Rev 2.x. Signed-off-by Randy Vinson <rvinson@mvista.com>
* Add support for UEC to 8568Andy Fleming2007-08-144-2/+142
| | | | | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* Empirically set cpo and clk_adjust for mpc85xx DDR2 supportHaiying Wang2007-08-141-5/+7
| | | | | | | | | | | | | | This patch is against u-boot-mpc85xx.git of www.denx.com Setting cpo to 0x9 for frequencies higher than 333MHz is verified on both MPC8548CDS board and MPC8568MDS board, especially for supporting 533MHz DDR2. Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for DDR2 on all current board versions especially ver 1.92 or later to bring up. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* Use an absolute address when jumping out of 4k boot pageKumar Gala2007-08-141-29/+24
| | | | | | | On e500 when we leave the 4k boot page we should use an absolute address since we don't know where the board code may want us to be really running at. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* MPC85xx BA bits not set for 3-bit bank address DIMMAndy Fleming2007-08-141-1/+6
| | | | | | | | | | The current implementation does not set the number of bank address bits (BA) in the processor. The default assumes 2 logical bank bits. This works fine for a DIMM that uses devices with 4 internal banks (SPD byte17 = 0x4) but needs to be set appropriately for a DIMM that uses devices with 8 internal banks (SPD byte17 = 0x8). Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
* Fix minor 85xx warningsAndy Fleming2007-08-141-1/+3
| | | | | | | | | | | Some patches had inserted warnings into the build: * mpc8560ads declared data without using it * cpu_init declared ecm and immap without using it in all CONFIGs * MPC8548CDS.h had its default filenames changed so that they contained "\m" in the paths. Made the defaults not Windows-specific (or anything-specific) Signed-off-by: Andy Fleming <afleming@freescale.com>
* 85xx start.S cleanup and exception supportAndy Fleming2007-08-143-298/+319
| | | | | | | | | | | | | | | | | | | | | | | | | | From: Ed Swarthout <Ed.Swarthout@freescale.com> Support external interrupts from platform to eliminate system hangs. Define CONFIG_INTERRUPTS board configure option to enable. Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC. Remove extra cpu initialization redundant with hardware initialization. Whitespace cleanup. Define and use _START_OFFSET consistent with other processors using ppc_asm.tmpl Move additional code from .text to boot page to make room for exception vectors at start of image. Handle Machine Check, External and Critical exceptions. Fix e500 machine check error determination in traps.c TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* 85xx allow debugger to configure ddr.Ed Swarthout2007-08-141-3/+45
| | | | | | | Only check for mpc8548 rev 1 when compiled for 8548. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* mpc85xx L2 cache reporting and SRAM relocation option.Ed Swarthout2007-08-141-18/+47
| | | | | | | | Allow debugger to override flash cs0/cs1 settings to enable alternate boot regions Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger2007-07-101-1/+1
| | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
* cpu/m*: Remove obsolete references to CONFIG_COMMANDSJon Loeliger2007-07-093-12/+12
| | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Fix #if typo in CONFIG_CMD_* changes.Jon Loeliger2007-07-051-1/+1
| | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
* cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).Jon Loeliger2007-07-043-11/+11
| | | | | | | | | | | | | | This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Merge with /home/wd/git/u-boot/custodian/u-boot-testingWolfgang Denk2007-07-031-1/+1
|\
| * Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECxKim Phillips2007-05-171-1/+1
| | | | | | | | | | | | | | For all practical u-boot purposes, TSECs don't differ throughout the mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | [ppc] Fix build breakage for all non-4xx PowerPC variants.Rafal Jaworowski2007-06-221-2/+2
|/ | | | | - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros - minor 4xx cleanup
* Coding stylke cleanup; update CHANGELOG.Wolfgang Denk2007-05-051-9/+9
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Cleaned up some 85xx PCI bugsAndy Fleming2007-05-021-4/+4
| | | | | | | | | | | * Cleaned up the CDS PCI Config Tables and added NULL entries to the end * Fixed PCIe LAWBAR assignemt to use the cpu-relative address * Fixed 85xx PCI code to assign powar region sizes based on the config values (rather than hard-coding them) * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address Signed-off-by: Andy Fleming <afleming@freescale.com>
* Add support for the 8568 MDS boardAndy Fleming2007-05-022-2/+7
| | | | | | | | | This included some changes to common files: * Add 8568 processor SVR to various places * Add support for setting the qe bus-frequency value in the dts * Add the 8568MDS target to the Makefile Signed-off-by: Andy Fleming <afleming@freescale.com>
* Reworked 85xx speed detection codeAndy Fleming2007-04-231-36/+8
| | | | | | | | | Changed the code to read the registers and calculate the clock rates, rather than using a "switch" statement. Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* Support 1G size on 8548Andy Fleming2007-04-231-2/+9
| | | | | | | e500v2 and newer cores support 1G page sizes. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
OpenPOWER on IntegriCloud