summaryrefslogtreecommitdiffstats
path: root/cpu/mpc83xx
Commit message (Collapse)AuthorAgeFilesLines
* pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarityKumar Gala2009-02-072-3/+3
| | | | | | | | | | The PCI_REGION_MEMORY and PCI_REGION_MEM are a bit to similar and can be confusing when reading the code. Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY to clarify its used for system memory mapping purposes. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Command usage cleanupPeter Tyser2009-01-282-2/+2
| | | | | | | | Remove command name from all command "usage" fields and update common/command.c to display "name - usage" instead of just "usage". Also remove newlines from command usage fields. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* Standardize command usage messages with cmd_usage()Peter Tyser2009-01-281-2/+2
| | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* 83xx: Use the proper sequence for updating IMMR.Scott Wood2009-01-211-3/+15
| | | | | | | | | | | This ensures that subsequent accesses properly hit the new window. The dcbi during the NAND loop was accidentally working around this; it's no longer necessary, as the cache is not enabled. Reported-by: Suchit Lepcha <Suchit.Lepcha@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: Add support for MPC83xx PCI-E controllersAnton Vorontsov2009-01-213-2/+317
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for MPC83xx PCI-E controllers in Root Complex mode. The patch is based on Tony Li and Dave Liu work[1]. Though unlike the original patch, by default we don't register PCI-E buses for use in U-Boot, we only configure the controllers for future use in other OSes (Linux). This is done because we don't have enough of spare BATs to map all the PCI-E regions. To actually use PCI-E in U-Boot, users should explicitly define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES symbol in the board file. And only then U-Boot will able to access PCI-E, but at the cost of disabled address translation. [1] http://lists.denx.de/pipermail/u-boot/2008-January/027630.html Signed-off-by: Tony Li <tony.li@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* 83xx: PCI agent mode fixes for multi-board systemsIra Snyder2009-01-211-0/+5
| | | | | | | | | | | | | | | | | | When running a system with 2 or more MPC8349EMDS boards in PCI agent mode, the boards will lock up the PCI bus by scanning against each other. The boards lock against each other by trying to access the PCI bus before clearing their configuration lock bit. Both boards end up in a loop, sending and receiving "Target Not Ready" messages forever. When running in PCI agent mode, the scanning now takes place after the boards have cleared their configuration lock bit. Also, add a missing declaration to the mpc83xx.h header file, fixing a build warning. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: Size optimization of start.SRon Madrid2009-01-211-38/+39
| | | | | | | | | | | Currently there are in excess of 100 bytes located at the beginning of the image built by start.S that are not being utilized. This patch moves a few functions into this part of the image. This will create a greater number of *available* bytes that can be used by board specific code in NAND builds and will decrease the size of the assembled code in other builds. Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Update U-Boot's build timestamp on every compilePeter Tyser2008-12-061-1/+2
| | | | | | | Use the GNU 'date' command to auto-generate a new U-Boot timestamp on every compile. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* Align end of bss by 4 bytesSelvamuthukumar2008-11-181-0/+1
| | | | | | | | | | Most of the bss initialization loop increments 4 bytes at a time. And the loop end is checked for an 'equal' condition. Make the bss end address aligned by 4, so that the loop will end as expected. Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
* Moved initialization of QE Ethernet controller to cpu_eth_init()Ben Warren2008-11-091-1/+19
| | | | | | Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2008-10-301-1/+1
|\
| * mpc83xx pci: Round up memory size in inbound window.Scott Wood2008-10-301-1/+1
| | | | | | | | | | | | | | | | The current calculation will fail to cover all memory if its size is not a power of two. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Make Freescale local bus registers available for both 83xx and 85xx.Haiying Wang2008-10-291-1/+1
|/ | | | | | | | | | | | | - Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it can be shared by both 83xx and 85xx - Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards files which use lbus83xx_t. - Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that 85xx can share them. Signed-off-by: Jason Jin <Jason.Jin@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* mpc83xx: Removed #ifdef CONFIG_MPC834X dependency on upmconfig functionRichard Retanubun2008-10-211-5/+0
| | | | | | | | This is done to allow other 83XX based platforms which also have UPM (e.g. 8360) to configure and use their UPM in u-boot. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: serdes: add forgotten shifts for rfcksAnton Vorontsov2008-10-211-1/+1
| | | | | | | | | | The rfcks should be shifted by 28 bits left. We didn't notice the bug because we were using only 100MHz clocks (for which rfcks == 0). Though, for SGMII we'll need 125MHz clocks. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Cleanup: fix "MHz" spellingWolfgang Denk2008-10-211-2/+2
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Use strmhz() to format clock frequenciesWolfgang Denk2008-10-211-20/+22
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge 'next' branchWolfgang Denk2008-10-1813-283/+284
|\ | | | | | | | | | | | | | | | | Conflicts: board/freescale/mpc8536ds/mpc8536ds.c include/configs/mgcoge.h Signed-off-by: Wolfgang Denk <wd@denx.de>
| * rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-1813-282/+282
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * Adds two more ethernet interface to 83xxrichardretanubun2008-10-181-1/+2
| | | | | | | | | | | | | | | | | | Added as a convenience for other platforms that uses MPC8360 (has 8 UCC). Six eth interface is chosen because the platform I am using combines UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth. Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | 83xx NAND boot: wait for LTESR[CC]Lepcha Suchit2008-10-171-0/+12
|/ | | | | | | | | | | | At least some revisions of the 8313, and possibly other chips, do not wait for all pages of the initial 4K NAND region to be loaded before beginning execution; thus, we wait for it before branching out of the first NAND page. This fixes warm reset problems when booting from NAND on 8313erdb. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: wait till UPM completes the write to arraySelvamuthukumar2008-10-141-3/+4
| | | | | | | | | | | Reference manual states that MxMR[MAD] increment is the indication of write to UPM array is complete. Honour that. Also, make the dummy write explicit. also fix the comment. Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: spd_sdram: fix ddr sdram base address assignment bugAnton Vorontsov2008-09-241-1/+1
| | | | | | | | | | | The spd_dram code shifts the base address, then masks 20 bits, but forgets to shift the base address back. Fix this by just masking the base address correctly. Found this bug while trying to relocate a DDR memory at the base != 0. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2008-09-032-28/+183
|\
| * mpc83xx: clean up cache operations and unlock_ram_in_cache() functionsNick Spence2008-09-031-21/+30
| | | | | | | | | | | | | | | | | | Cleans up some latent issues with the data cache control so that dcache_enable() and dcache_disable() will work reliably (after unlock_ram_in_cache() has been called) Signed-off-by: Nick Spence <nick.spence@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc83xx: Store and display Arbiter Event Register valuesNick Spence2008-09-032-1/+146
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Record the Arbiter Event Register values and optionally display them. The Arbiter Event Register can record the type and effective address of an arbiter error, even through an HRESET. This patch stores the values in the global data structure. Display of the Arbiter Event registers immediately after the RSR value can be enabled with defines. The Arbiter values will only be displayed if an arbiter event has occured since the last Power On Reset, and either of the following defines exist: #define CONFIG_DISPLAY_AER_BRIEF - display only the arbiter address and and type register values #define CONFIG_DISPLAY_AER_FULL - display and interpret the arbiter event register values Address Only transactions are one of the trapped events that can register as an arbiter event. They occur with some cache manipulation instructions if the HID0_ABE (Address Broadcast Enable) is set and the memory region has the MEMORY_COHERENCE WIMG bit set. Setting: #define CONFIG_MASK_AER_AO - prevents the arbiter from recording address only events, so that it can still capture other real problems. Signed-off-by: Nick Spence <nick.spence@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc83xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cacheNick Spence2008-09-031-4/+5
| | | | | | | | | | | | | | | | | | | | | | This is needed in unlock_ram_in_cache() because it is called from C and will corrupt the small data area anchor that is kept in R2. lock_ram_in_cache() is modified similarly as good coding practice, but is not called from C. Signed-off-by: Nick Spence <nick.spence@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * MPC83XX: Fix GPIO configuration - set gpio level before directionNick Spence2008-09-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set DAT value before DIR values to avoid creating glitches on the GPIO signals. Set gpio level register before direction register to inhibit glitches on high level output pins. Dir and data gets cleared at powerup, so high level output lines see a short low pulse between setting the direction and level registers. Issue was seen on a new board with the nReset line of the NOR flash connected to a GPIO. Setting the direction register puts the NOR flash in reset so the next instruction to set the level cannot get executed. Signed-off-by: Nick Spence <nick.spence@freescale.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Pass in tsec_info struct through tsec_initializeAndy Fleming2008-09-021-13/+7
|/ | | | | | | | | | | | | The tsec driver contains a hard-coded array of configuration information for the tsec ethernet controllers. We create a default function that works for most tsecs, and allow that to be overridden by board code. It creates an array of tsec_info structures, which are then parsed by the corresponding driver instance to determine configuration. Also, add regs, miiregs, and devname fields to the tsec_info structure, so that we don't need the kludgy "index" parameter. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* mpc83xx: add PCISLAVE support to 83XX_GENERIC_PCI setup codeIra W. Snyder2008-08-251-0/+26
| | | | | | | | | This adds a helper function to unlock the PCI configuration bit, so that any extra PCI setup (such as outbound windows, etc.) can be done after using the 83XX_GENERIC_PCI code to set up the PCI bus. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* fdt: rework fdt_fixup_ethernet() to use env instead of bd_tKumar Gala2008-08-211-1/+1
| | | | | | | | | | Move to using the environment variables 'ethaddr', 'eth1addr', etc.. instead of bd->bi_enetaddr, bi_enet1addr, etc. This makes the code a bit more flexible to the number of ethernet interfaces. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* NAND boot: MPC8313ERDB supportScott Wood2008-08-122-107/+157
| | | | | | | | | Note that with older board revisions, NAND boot may only work after a power-on reset, and not after a warm reset. I don't have a newer board to test on; if you have a board with a 33MHz crystal, please let me know if it works after a warm reset. Signed-off-by: Scott Wood <scottwood@freescale.com>
* 8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreqPaul Gortmaker2008-07-141-1/+1
| | | | | | | | | | Some boards that have external 16550 UARTs don't have a direct tie between bi_busfreq and the clock used for the UARTs. Boards that do have such a tie should set CFG_NS16550_CLK to be get_bus_freq(0) -- which most of them do already. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* fdt: add crypto node handling for MPC8{3, 5}xxE processorsKim Phillips2008-07-141-0/+18
| | | | | | | | Delete the crypto node if not on an E-processor. If on 8360 or 834x family, check rev and up-rev crypto node (to SEC rev. 2.4 property values) if on an 'EA' processor, e.g. MPC8349EA. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* silence misc printf formatting compiler warningsKim Phillips2008-07-102-4/+4
| | | | Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-netWolfgang Denk2008-07-091-0/+20
|\
| * Add mechanisms for CPU and board-specific Ethernet initializationBen Warren2008-07-061-0/+20
| | | | | | | | | | | | | | | | This patch is the first step in cleaning up net/eth.c, by moving Ethernet initialization to CPU or board-specific code. Initial implementation is only on the Freescale TSEC controller, but others will be added soon. Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | fix system config overwrite @ MPC834x and MPC8313Andre Schwarz2008-06-251-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During 83xx setup the "System I/O configuration register high" gets overwritten with user defined value if CFG_SICRH is defined. Regarding to the MPC834x manual (Table 5-28 reve.1) bits 28+29 of SICRH must keep their reset value regardless of configuration. On my board (using RGMII) those bits are set after reset - yet it's unclear where they come from. The patch keeps both bits on MPC834x and MPC8313. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | mpc83xx: move CPU_TYPE_ENTRY over to processor.hKim Phillips2008-06-251-1/+0
|/ | | | | | | | | | to avoid this: cpu.c:47:1: warning: "CPU_TYPE_ENTRY" redefined In file included from cpu.c:33: /home/kim/git/u-boot/include/asm/processor.h:982:1: warning: this is the location of the previous definition Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* PPC: Create and use CONFIG_HIGH_BATSBecky Bruce2008-06-031-3/+3
| | | | | | | | | | | Change all code that conditionally operates on high bat registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS instead of the myriad ways this is done now. Define the option for every config for which high bats are supported (and enabled by early boot, on parts where they're not always enabled) Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* Big white-space cleanup.Wolfgang Denk2008-05-213-6/+6
| | | | | | | | | | | This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: Wolfgang Denk <wd@denx.de>
* mpc83xx: remove the unused CPM's stuffDave Liu2008-04-251-8/+0
| | | | | | The MPC83xx family never have CPM block, so remove it from 83xx. Signed-off-by: Dave Liu <daveliu@freescale.com>
* lib_ppc: Revert "Make MPC83xx one step closer to full relocation."Kim Phillips2008-04-251-7/+4
| | | | | | | | This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has proven problematic getting right from the start at least on 83xx and 4xx. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: Update DIMM data bus width test to support 40-bit widthLee Nipper2008-04-111-2/+2
| | | | | | | | 32-bit wide ECC memory modules report 40-bit width. Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Make MPC83xx one step closer to full relocation.Joakim Tjernlund2008-03-281-4/+7
| | | | | | | | Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx and use GOT relative reference. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) codeKim Phillips2008-03-281-123/+43
| | | | | | | | | | in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6, 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing and processor ID display. Add REVID_{MAJ,MIN}OR macros to make REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR convenience macros. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: display ddr frequency in board_add_ram_info bannerKim Phillips2008-03-281-4/+7
| | | | Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: unreinvent mem_clkKim Phillips2008-03-282-13/+13
| | | | | | | delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to mem_*_clk for consistency's sake. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixupsAnton Vorontsov2008-03-251-0/+8
| | | | | | | | | | device_type = "soc" is being deprecated, newer device trees will use "fsl,soc" and/or "fsl,immr" for the soc nodes. This patch also adds clock-frequency property for soc nodes (the same value as bus-frequency). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
* 83xx: serdes setup routinesAnton Vorontsov2008-03-252-0/+146
| | | | | | This patch adds few routines to configure serdes on 837x targets. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
OpenPOWER on IntegriCloud