summaryrefslogtreecommitdiffstats
path: root/cpu/mpc8260
Commit message (Collapse)AuthorAgeFilesLines
* Move do_fixup* for libfdt into common codeKumar Gala2007-11-211-26/+4
| | | | | | | | | | Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260 into common/fdt_support.c and renamed: do_fixup() -> do_fixup_by_path() do_fixup_u32() -> do_fixup_by_path_u32() Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Revert "Correct fixup relocation for mpc8260"Grant Likely2007-11-152-1/+2
| | | | | This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* add ft_cpu_setup(..) on mpc8260Sergej Stepanov2007-11-031-0/+38
| | | | | | | | Add ft_cpu_setup(..)-function to adapt it for use with libfdt based on code from mpc5xxx Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de> --
* cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger2007-07-103-3/+3
| | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
* cpu/m*: Remove obsolete references to CONFIG_COMMANDSJon Loeliger2007-07-096-16/+16
| | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Fixing some typos etc. introduced mainly by cfg patches.Wolfgang Denk2007-07-051-1/+1
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Correct fixup relocation for mpc8260Grant Likely2007-07-042-2/+1
| | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* Consolidate mpc8260 linker scriptsGrant Likely2007-07-042-0/+128
| | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).Jon Loeliger2007-07-046-15/+16
| | | | | | | | | | | | | | This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Coding stylke cleanup; rebuild CHANGELOGWolfgang Denk2007-06-221-2/+2
|
* [ppc] Fix build breakage for all non-4xx PowerPC variants.Rafal Jaworowski2007-06-221-2/+2
| | | | | - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros - minor 4xx cleanup
* [PATCH] TQM8272: dont change the bits given from the HRCWHeiko Schocher2007-03-212-21/+5
| | | | | | | for the SIUMCR and BCR Register. Fix the calculation for the EEprom Size Signed-off-by: Heiko Schocher <hs@denx.de>
* Added support for the TQM8272 board from TQHeiko Schocher2006-12-214-2/+62
| | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* Move "ar" flags to config.mk to allow for silent "make -s"Wolfgang Denk2006-10-091-1/+1
| | | | Based on patch by Mike Frysinger, 20 Jun 2006
* Add support for a saving build objects in a separate directory.Marian Balakowicz2006-09-011-8/+12
| | | | | | | | | | | | | | | | | | | | | Modifications are based on the linux kernel approach and support two use cases: 1) Add O= to the make command line 'make O=/tmp/build all' 2) Set environement variable BUILD_DIR to point to the desired location 'export BUILD_DIR=/tmp/build' 'make' The second approach can also be used with a MAKEALL script 'export BUILD_DIR=/tmp/build' './MAKEALL' Command line 'O=' setting overrides BUILD_DIR environent variable. When none of the above methods is used the local build is performed and the object files are placed in the source directory.
* Fix PCI to memory window size problems on PM82x boardsWolfgang Denk2006-05-301-2/+2
| | | | | | We use the "automatic" mode that was used for the MPC8266ADS and MPC8272 boards. Eventually this should be used on all boards?] Patch by Wolfgang Grandegger, 17 Jan 2006
* GCC-4.x fixes: clean up global data pointer initialization for all boards.Wolfgang Denk2006-03-3110-35/+24
|
* Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280ECWolfgang Denk2006-03-121-8/+19
| | | | Patch by KokHow Teh, 16 Jun 2005
* Add support for multiple PHYs.Marian Balakowicz2005-10-281-0/+10
|
* Cleanup for GCC-4.xWolfgang Denk2005-10-131-1/+1
|
* CleanupWolfgang Denk2005-09-251-22/+22
|
* Added support for PCI bridge on MPC8272ADSWolfgang Denk2005-09-251-5/+34
| | | | Patch by Vitaly Bordug, Feb 09 2005
* Fix PowerQUICC II mask detection.Wolfgang Denk2005-08-061-2/+2
| | | | Patch by Eugene Surovegin, 20 Dec 2004
* Fix baudrate setting for KGDB on MPC8260Wolfgang Denk2005-08-061-2/+2
| | | | Patch by HoJin, 11 Dec 2004
* Merge with /home/wd/git/u-boot/masterWolfgang Denk2005-08-051-2/+5
|\
| * Ignore broadcast status bit in received frames in 8260 FCC ethernetWolfgang Denk2005-08-031-2/+5
| | | | | | | | | | loopback test code Patch by Murray Jensen, 18 Jul 2005
* | * Patch by Jon Loeliger, Kumar Gala 2005-02-08Jon Loeliger2005-07-231-1/+1
|/ | | | | | | | - Convert the CPM2 based functionality to use new CONFIG_CPM2 option rather than a myriad of CONFIG_MPC8560-like variants. Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560. Eliminates the CONFIG_MPC8560 option entirely. Distributes the new CONFIG_CPM2 option to each 8260 board.
* Patch by Juergen Selent, 17 May 2005:wdenk2005-05-301-0/+2
| | | | Add support for Funkwerk VoVPN gateway module.
* Patch by Jerry Van Baren, 08 Nov 2004:wdenk2005-04-031-2/+2
| | | | | | | | - Add low-boot option for MPC8260ADS board (if lowboot is selected, the jumper for the HRCW source should select flash. If lowboot is not selected, the jumper for the HRCW source should select the BCSR. - change default load base address to 0x00400000
* * Patch by Gridish Shlomi, 30 Aug 2004:wdenk2004-10-103-4/+19
| | | | | | | | | | | | | | | | | - Add support to revA version of PQ27 and PQ27E. - Reverted MPC8260ADS baudrate back to original 115200 * Patch by Hojin, 17 Sep 2004: Fix typo in cfi_flash.c * Patch by Mark Jonas, 09 September 2004: mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong error message * Patch by Mark Jonas, 31 August 2004: Added option CFG_XLB_PIPELINING to enable XLB pipelining. This improves FTP performance for MPC5200 systems. Enabled for IceCube by default.
* * Patch by Yuli Barcohen, 13 Jul 2004:wdenk2004-09-281-7/+0
| | | | | | | | Allow clock setting on MPC866/MPC885 series chips according to environment variable `cpuclk' * Patch by Yuli Barcohen, 20 Apr 2004: Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
* * Add missing microblaze header fileswdenk2004-04-181-2/+2
| | | | | | * Patch by Rune Torgersen, 06 Apr 2004: - Fix some PCI problems on the MPC8266ADS board - Fix the location of some PCI entries in the immap structure
* * Patches by Pantelis Antoniou, 30 Mar 2004:wdenk2004-04-151-1/+5
| | | | | | | | | | - add auto-complete support to the U-Boot CLI - add support for NETTA and NETPHONE boards; fix NETVIA board * Patch by Yuli Barcohen, 28 Mar 2004: - Add support for MPC8272 family including MPC8247/8248/8271/8272 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS) - Change configuration method for MPC8260ADS family
* * Patch by Stephen Williams, 19 March 2004wdenk2004-03-231-1/+1
| | | | | | | | | | | | | | | Increase speed of sector reads from SystemACE, shorten poll timeout and remove a useless reset * Patch by Tolunay Orkun, 19 Mar 2004: Make GigE PHY 1000Mbps Speed/Duplex detection conditional (CONFIG_PHY_GIGE) * Patch by Brad Kemp, 18 Mar 2004: prevent machine checks during a PCI scan * Patch by Pierre Aubert, 18 Mar 2004: Fix string cleaning in IDE identification
* * Patches by Thomas Viehweger, 16 Mar 2004:wdenk2004-03-237-43/+54
| | | | | | | | | - show PCI clock frequency on MPC8260 systems - add FCC_PSMR_RMII flag for HiP7 processors - in do_jffs2_fsload(), take load address from load_addr if not set explicit, update load_addr otherwise - replaced printf by putc/puts when no formatting is needed (smaller code size, faster execution)
* * Patch by Pierre Aubert, 11 Mar 2004:wdenk2004-03-141-2/+7
| | | | | | | | | | | - add bitmap command and splash screen support in cfb console - add [optional] origin in the bitmap display command * Patch by Travis Sawyer, 11 Mar 2004: Fix ocotea board early init interrupt setup. * Patch by Thomas Viehweger, 11 Mar 2004: Remove redundand code; add PCI-specific bits to include/mpc8260.h
* * Patches by Reinhard Meyer, 14 Feb 2004:wdenk2004-02-231-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | - update board/emk tree; use common flash driver - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c [adapted for other PPC CPUs -- wd] - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c * Patch by Jon Diekema, 13 Feb 2004: Call show_boot_progress() whenever POST "FAILED" is printed. * Patch by Nishant Kamat, 13 Feb 2004: Add support for TI OMAP1610 H2 Board Fixes for cpu/arm926ejs/interrupt.c (based on Richard Woodruff's patch for arm925, 16 Oct 03) Fix for a timer bug in OMAP1610 Innovator Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2 * Patches by Stephan Linz, 12 Feb 2004: - add support for NIOS timer with variable period preload counter value - prepare POST framework support for NIOS targets * Patch by Denis Peter, 11 Feb 2004: add POST support for the MIP405 board
* * Patch by Travis Sawyer, 09 Feb 2004:wdenk2004-02-222-189/+224
| | | | | | | | | | | | | | | | | | | | | | | | | | | o 440GX: - Fix PCI Indirect access for type 1 config cycles with ppc440. - Add phymode for 440 enet - fix pci pre init o XPedite1K: - Change board_pre_init to board_early_init_f - Add user flash to bus controller setup - Fix pci pre init - Fix is_pci_host to check GPIO for monarch bit - Force xpedite1k to pci conventional mode (via #define option) * Patch by Brad Kemp, 4 Feb 2004: - handle the machine check that is generated during the PCI scans on 82xx processors. - define the registers used in the IMMR by the PCI subsystem. * Patch by Pierre Aubert, 03 Feb 2004: cpu/mpc5xxx/start.S: copy MBAR into SPR311 * Patch by Jeff Angielski, 03 Feb 2004: Fix copy & paste error in cpu/mpc8260/pci.c * Patch by Reinhard Meyer, 24 Jan 2004: Fix typo in cpu/mpc5xxx/pci_mpc5200.c
* * Patch by Nicolas Lacressonnière, 12 Nov 2003:wdenk2003-12-062-1/+2
| | | | | | | | | | | | | | update for for Atmel AT91RM9200DK development kit: - support for environment variables in DataFlash - Atmel DataFlash AT45DB1282 support * Patch by Jeff Carr, 11 Nov 2003: add support for new version of 8270 processors * Patches by George G. Davis, 05 Nov 2003: - only pass the ARM linux initrd tag to the kernel when an initrd is actually present - update omap1510inn configuration file
* * Patch by Gleb Natapov, 19 Sep 2003:wdenk2003-12-061-125/+6
| | | | | | | | Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c * Patch by Anders Larsen, 17 Sep 2003: Bring ARM memory layout in sync with the documentation: stack and malloc-heap are now located _below_ the U-Boot code
* * Use "-fPIC" instead of "-mrelocatable" to prevent problems withwdenk2003-11-171-1/+1
| | | | | | | | | | | | | recent tools * Add checksum verification to 'imls' command * Add bd_info fields needed for 4xx Linux I2C driver * Patch by Martin Krause, 4 Nov. 2003: Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap) * Print used network interface when CONFIG_NET_MULTI is set
* * Patches by Xianghua Xiao, 15 Oct 2003:wdenk2003-10-151-8/+8
| | | | | | | | - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
* * Patch by Yuli Barcohen, 25 Sep 2003:wdenk2003-10-081-0/+3
| | | | | | | | add support for Zephyr Engineering ZPC.1900 board * Patch by Anders Larsen, 23 Sep 2003: add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only implemented for the x86 architecture)
* * Patch by Rune Torgersen, 17 Sep 2003:wdenk2003-09-181-7/+33
| | | | | - Fixes for MPC8266 default config - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
* * Map ISP1362 USB OTG controller for NSCU boardwdenk2003-08-051-0/+24
| | | | | | | | | * Patch by Brad Parker, 02 Aug 2003: fix sc520_cdp problems * Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements) * Allow erase command to cross flash bank boundaries
* * Implement new mechanism to export U-Boot's functions to standalonewdenk2003-07-241-69/+1
| | | | | | | | applications: instead of using (PPC-specific) system calls we now use a jump table; please see doc/README.standalone for details * Patch by Dave Westwood, 24 Jul 2003: added support for Unity OS (a proprietary OS)
* * Patches by Yuli Barcohen, 13 Jul 2003:wdenk2003-07-143-14/+40
| | | | | | | | | | | | | | | | | | - Correct flash and JFFS2 support for MPC8260ADS - fix PVR values and clock generation for PowerQUICC II family (8270/8275/8280) * Patch by Bernhard Kuhn, 08 Jul 2003: - add support for M68K targets * Patch by Ken Chou, 3 Jul: - Fix PCI config table for A3000 - Fix iobase for natsemi.c (PCI_BASE_ADDRESS_0 is the IO base register for DP83815) * Allow to enable "slow" POST routines by key press on power-on * Fix temperature dependend switching of LCD backlight on LWMON * Tweak output format for LWMON
* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:wdenk2003-06-281-2/+2
| | | | | | | | | - Allow to call sysmon function interactively - PIC on LWMON board needs delay after power-on - Add missing RSR definitions for MPC8xx - Improve log buffer handling: guarantee clean reset after power-on - Add support for EXBITGEN board - Add support for SL8245 board
* * Code cleanup:wdenk2003-06-2710-200/+196
| | | | | | | | | - remove trailing white space, trailing empty lines, C++ comments, etc. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) * Patches by Kenneth Johansson, 25 Jun 2003: - major rework of command structure (work done mostly by Michal Cendrowski and Joakim Kristiansen)
* Patch by Murray Jensen, 20 Jun 2003:wdenk2003-06-211-2/+2
| | | | | - hymod update - cleanup (especially for gcc-3.x compilers)
OpenPOWER on IntegriCloud