summaryrefslogtreecommitdiffstats
path: root/common
Commit message (Collapse)AuthorAgeFilesLines
* hash.c: Correct non-hash subcommand crc32 addr-save supportTom Rini2013-11-251-2/+2
| | | | | | | | | | | | | In the case of not having CONFIG_CMD_HASH but having CONFIG_CMD_CRC32 enabled (and not CONFIG_CRC32_VERIFY), we end up in this part of the code path on hash_command(). However, we will only have exactly 3 args here, and 3 > 3 is false, and we will not try and store the hash at the address given as arg #3. The next problem however is that we've been moving argv around so the third value is now in argv[0] not argv[3]. Confirmed on AM335x Beaglebone White. Signed-off-by: Tom Rini <trini@ti.com>
* cmd_eeprom: fix i2c_{read|write} usage if env is in I2C EEPROMAlexey Brodkin2013-11-131-2/+2
| | | | | | | | | | | | | | | Data "offset" is not used directly in case of I2C EEPROM. Istead it is split into "block number" and "offset within mentioned block". Which are "addr[0]" and "addr[1]" respectively. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> cc: Peter Tyser <ptyser@xes-inc.com> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Mischa Jonker <mjonker@synopsys.com>
* lcd: allow overriding lcd_get_size()Anatolij Gustschin2013-11-121-3/+7
| | | | | | | | | | | | | | Remove the redundant lcd_line_length initialisation which sneaked in when an earlier version of the patch of commit 6d330719 has been rebased. Some lcd drivers need to setup lcd_line_length not from the panel_info parameters but by different means. Make the lcd_get_size() weak to allow setting lcd_line_length in a driver specific way. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stephen Warren <swarren@wwwdotorg.org>
* Merge branch 'master' of git://www.denx.de/git/u-boot-usbTom Rini2013-11-081-28/+23
|\
| * usb: ums: add ums exit feature by ctrl+c or by detach usb cablePrzemyslaw Marczak2013-11-081-8/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows exiting from UMS mode to u-boot prompt by detaching usb cable or by pressing ctrl+c. Add new config: CONFIG_USB_CABLE_CHECK. If defined then board file should provide function: usb_cable_connected() (include/usb.h) that return 1 if cable is connected and 0 otherwise. Changes v2: - add a note to the README Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Marek Vasut <marex@denx.de>
| * usb: ums: allows using every mmc device with ums.Przemyslaw Marczak2013-11-081-10/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Before this change ums command only allowed use of mmc 0. Now this argument can be set. Changes: - remove mmc device number checking because it is always positive number - remove printing "no such device" - it is done by find_mmc_device() Change-Id: I767e45151ad515c7bef19e6c13087374f5e23c11 Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Marek Vasut <marex@denx.de>
| * usb: ums: code refactoring to improve reusability on other boards.Przemyslaw Marczak2013-11-081-16/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces some cleanups to ums code. Changes: ums common: - introduce UMS_START_SECTOR and UMS_NUM_SECTORS as defined in usb_mass_storage.h both default values as 0 if board config doesn't define them common cleanup changes: - change name of struct "ums_board_info" to "ums" - "ums_device" fields are moved to struct ums and "dev_num" is removed - change function name: board_ums_init to ums_init - remove "extern" prefixes from usb_mass_storage.h cmd_usb_mass_storage: - change error() to printf() if need to print info message - change return values to command_ret_t type at ums command code - add command usage string Changes v2: ums common: - always returns number of read/write sectors - coding style clean-up ums gadget: - calculate amount of read/write from device returned value. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Marek Vasut <marek.vasut@gmail.com>
* | env: fix the env export varnamePierre Aubert2013-11-081-4/+2
| | | | | | | | | | | | | | | | The env export command doesn't export the first variable of the list since commit 5a31ea04c9ee5544fbb70ad7597ea4b294840eab "env grep" - reimplement command using hexport_r() Signed-off-by: Pierre Aubert <p.aubert@staubli.com>
* | autoboot: add an option to override keyed autobootMark Langsdorf2013-11-081-2/+2
| | | | | | | | | | | | | | | | As originally implemented, setting the AUTOBOOT_KEYED config option will prevent users from breaking into the autoboot script with ctrl-c. Restore that option with a new config symbol. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
* | cmd_zfs: normalize 'file not found' errorsLuka Perkov2013-11-081-1/+1
| | | | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org>
* | cmd_reiser: normalize 'file not found' errorsLuka Perkov2013-11-081-1/+1
| | | | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org>
* | cmd_ubifs: normalize 'file not found' errorsTim Harvey2013-11-081-4/+8
| | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* | cmd/gpt: Support gpt command for all devicesEgbert Eich2013-11-081-26/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | The gpt command was only implemented for mmc devices. There is no reason why this command should not be generalized and be applied all other storage device classes. This change both simplifies the implementation and eliminates a build failure for systems that don't support mmcs. Signed-off-by: Egbert Eich <eich@suse.com> Tested-by: Piotr Wilczek <p.wilczek@samsung.com> [trini: Change coding style slightly] Signed-off-by: Tom Rini <trini@ti.com>
* | common/cmd_bootm.c: fix subcommand processing in OS specific do_bootm_xxx() ↵Miao Yan2013-11-081-24/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | functions In commit "5c427e4: use BOOTM_STATE_OS_CMDLINE flag for plain bootm" and "3d187b3: Only pass BOOTM_STATE_OS_CMDLINE on PowerPC/MIPS", BOOTM_STATE_OS_CMDLINE was added to do_bootm for PowerPC and MIPS. This breaks other OSes (vxworks, netbsd, plan9,...) that don't support subcommand processing, e.g. they all contain the following code in their do_bootm_xxx(): if (flag & BOOTM_STATE_OS_PREP) return 0; if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) return 1; which will result a "subcommand not supported" error. This patch changes the above logic to: /* if not go command, pretend everything to be OK */ if (flag != BOOTM_STATE_OS_GO) return 0; Signed-off-by: Miao Yan <miao.yan@windriver.com>
* | cmd_nvedit.c: Add env exists commandAndrew Ruder2013-11-081-0/+23
|/ | | | | | | | | | | | | | | | | | | | env exists is a way to test (in hush) if an environment variable exists. A workaround existed using printenv but this new command doesn't require all the stdout/stderr redirection to prevent printing information to the screen. Example: $ set testexists 1 $ env exists testexists && echo "yes" yes $ env exists testexists || echo "no" $ set testexists $ env exists testexists && echo "yes" $ env exists testexists || echo "no" no $ Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
* fpga: Add support for gzip images with bitstreamsMichal Simek2013-11-061-3/+19
| | | | | | | | | | | | | | | | | | | Here is the set of command which has been performed to proof this feature. gzip < fpga.bin > fpga.bin.gz mkimage -A arm -O u-boot -T firmware -C gzip \ -a 20000000 -n "zc702_fpga_bin" -d fpga.bin.gz fpga.bin.gz.ub tftp 100000 fpga.bin.gz.ub fpga loadmk 0 100000 This flow should speedup loading bitstream data from external memory and save image footprint in non volatile memory. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* pxe: fix handling of absolute pathsRob Herring2013-11-041-1/+8
| | | | | | | | | | | pxelinux and syslinux differ in their handling of absolute paths in menu files. A pxelinux path is aways prepended with the bootfile path while syslinux allows for absolute paths. u-boot was always treating a leading / as an absolute path breaking some pxelinux setups. Fix this by adding a flag to distinguish pxelinux vs. syslinux behavior. Reported-by: Ian Campbell <Ian.Campbell@citrix.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* common: convert makefiles to Kbuild styleMasahiro Yamada2013-10-312-237/+190
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2013-10-215-36/+152
|\
| * usb: add enum usb_init_type parameter to usb_lowlevel_initTroy Kisky2013-10-201-1/+1
| | | | | | | | | | | | This parameter will later be used to verify OTG ports. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * usb: rename board_usb_init_type to usb_init_typeTroy Kisky2013-10-201-1/+1
| | | | | | | | | | | | | | | | | | | | This will be used by usb_lowlevel_init so it will no longer be used by only board specific functions. Move definition of enum usb_init_type higher in file so that it will be available for usb_low_level_init. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * cmd:thor: Support for TIZEN's download command (thordown)Lukasz Majewski2013-10-202-0/+73
| | | | | | | | | | | | | | | | New command - thordown - has been added to support downloading data via lthor TIZEN program. It is similar to dfu command syntax and reuses its code for flashing data. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
| * usb: new board-specific USB init interfaceMateusz Zalega2013-10-203-33/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit unifies board-specific USB initialization implementations under one symbol (usb_board_init), declaration of which is available in usb.h. New API allows selective initialization of USB controllers whenever needed. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com>
| * USB: xHCI: Add stack support for xHCIVivek Gautam2013-10-201-2/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds stack layer for eXtensible Host Controller Interface which facilitates use of USB 3.0 in host mode. Adapting xHCI host controller driver in linux-kernel by Sarah Sharp to needs in u-boot. Initial porting from Linux kernel version 3.4, with following top commit history of drivers/usb/host/xhci* : cf84055 xHCI: Cleanup isoc transfer ring when TD length mismatch found This adds the basic xHCI host controller driver with bare minimum features: - Control/Bulk transfer support has been added with required infrastructure for necessary xHC data structures. - Stream protocol hasn't been supported yet. - No support for quirky devices has been added. Signed-off-by: Vikas C Sajjan <vikas.sajjan@samsung.com> Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Simon Glass <sjg@chromium.org> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Dan Murphy <dmurphy@ti.com> Cc: Marek Vasut <marex@denx.de>
* | i2c: fix init on generic boardtrem2013-10-171-0/+4
|/ | | | | | | | | | | On generic board, the i2c init initialize only one bus. But the new i2c subsystem allow to manage severals i2c bus. So in the case, instead of initializing a bus, we just set the current i2c bus. The initialization will be done in the i2c command. Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
* common: fsl: Fix broken SPDX-License-Identifier changeMichal Simek2013-10-161-4/+4
| | | | | | | | This bug was introduced by: "Add GPL-2.0+ SPDX-License-Identifier to source files" (sha1: 1a4596601fd395f3afb8f82f3f840c5e00bdd57a) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* mtd: fix warnings due to 64-bit partition supportScott Wood2013-10-151-2/+2
| | | | | | | | | | | | | | | commit 39ac34473f3c96e77cbe03a49141771ed1639486 ("cmd_mtdparts: use 64 bits for flash size, partition size & offset") introduced warnings in a couple places due to printf formats or pointer casting. This patch fixes the warnings pointed out here: http://lists.denx.de/pipermail/u-boot/2013-October/164981.html Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: York Sun <yorksun@freescale.com> Cc: Stefan Roese <sr@denx.de> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Tom Rini <trini@ti.com>
* sf: Add GPL-2.0+ SPDX-License-Identifier for missing onesJagannadha Sutradharudu Teki2013-10-161-1/+2
| | | | | | | | Added GPL-2.0+ SPDX-License-Identifier for missed sf source files. Signed-off-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Signed-off-by: Bo Shen <voice.shen@atmel.com>
* cmd_sandbox.c: Update for do_(load|save) not taking a number baseTom Rini2013-10-141-2/+2
| | | | Signed-off-by: Tom Rini <trini@ti.com>
* Prevent null pointer dereference originating in cmd_pxe.cSteven Falco2013-10-141-42/+42
| | | | | | | | | | | | | | | | | | | | Pass a valid cmdtp into do_tftpb(), do_ext2load(), and do_get_fat(), to avoid possible crashes due to null pointer dereferencing. Commit d7884e047d08447dfd1374e9fa2fdf7ab36e56f5 does not go far enough. There is still at least one call chain that can result in a crash. The do_tftpb(), do_ext2load(), and do_get_fat() functions expect a valid cmdtp. Passing in NULL is particularly bad in the do_tftpb() case, because eventually boot_get_kernel() will be called with a NULL cmdtp: do_tftpb() -> netboot_common() -> bootm_maybe_autostart() -> do_bootm() -> do_bootm_states() -> bootm_find_os() -> boot_get_kernel() Around line 991 in cmd_bootm.c, boot_get_kernel() will dereference the null pointer, and the board will crash. Signed-off-by: Steven A. Falco <stevenfalco@gmail.com>
* Coding Style cleanup: replace leading SPACEs by TABsWolfgang Denk2013-10-142-4/+4
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Drop changes for PEP 4 following python tools] Signed-off-by: Tom Rini <trini@ti.com>
* Coding Style cleanup: remove trailing white spaceWolfgang Denk2013-10-1421-21/+21
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* env_mmc: fix buffer allocation for armv7Markus Niebel2013-10-141-5/+4
| | | | | | | | | | | | | | | | | | | | commit d196bd880347373237d73e0d115b4d51c68cf2ad adds redundand environment to mmc. The usage of malloc in env_relocate_spec triggers cache errors on armv7. Tested on a not mainlined i.MX53 board: Board: TQMa53 I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 ERROR: v7_dcache_inval_range - start address is not aligned - 0x8f57c2d8 ERROR: v7_dcache_inval_range - stop address is not aligned - 0x8f57e2d8 ERROR: v7_dcache_inval_range - start address is not aligned - 0x8f57e2e0 ERROR: v7_dcache_inval_range - stop address is not aligned - 0x8f5802e0 Using default environment Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
* env: dataflash: fix env_init issueBo Shen2013-10-141-32/+18
| | | | | | | | | | | | As the SPI controller is not initialized before env_init(), it causes reading env in dataflash failed. So, although saveenv() successfully, it shows warning information when reboot the system as following: *** Warning - bad CRC, using default environment Let the env_relocate() to check env CRC and import it. Signed-off-by: Bo Shen <voice.shen@atmel.com>
* cmd_ubi: add write.part command, to write a volume in multiple partsPaul Burton2013-10-091-15/+48
| | | | | | | | | | | | | | | | | | | | | | | This allows you to write data to an UBI volume when the amount of memory available to write that data from is less than the total size of the data. For example, you may split a root filesystem UBIFS image into parts, provide the total size of the image to the first write.part command and then use multiple write.part commands to write the subsequent parts of the volume. This results in a sequence of commands akin to: ext4load mmc 0:1 0x80000000 rootfs.ubifs.0 ubi write.part 0x80000000 root 0x08000000 0x18000000 ext4load mmc 0:1 0x80000000 rootfs.ubifs.1 ubi write.part 0x80000000 root 0x08000000 ext4load mmc 0:1 0x80000000 rootfs.ubifs.2 ubi write.part 0x80000000 root 0x08000000 This would write 384MiB of data to the UBI volume 'root' whilst only requiring 128MiB of said data to be held in memory at a time. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Stefan Roese <sr@denx.de>
* cmd_ubi: use int64_t volume size for 'ubi create'Paul Burton2013-10-091-8/+8
| | | | | | | | | int64_t matches the bytes field in struct ubi_mkvol_req to which the size is assigned. With the prior signed 32 bit integer, volumes were restricted to being less than 2GiB in size. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Stefan Roese <sr@denx.de>
* cmd_mtdparts: use 64 bits for flash size, partition size & offsetPaul Burton2013-10-091-25/+29
| | | | | | | | | | This matches the 64 bit size in struct mtd_info and allows the mtdparts command to function correctly with a flash >= 4GiB. Format specifiers for size & offset are given the ll length, matching its use in drivers/mtd in absence of something like inttypes.h/PRIx64. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Stefan Roese <sr@denx.de>
* Fix number base handling of "load" commandWolfgang Denk2013-10-074-13/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As documented, almost all U-Boot commands expect numbers to be entered in hexadecimal input format. (Exception: for historical reasons, the "sleep" command takes its argument in decimal input format.) This rule was broken for the "load" command; for details please see especially commits 045fa1e "fs: add filesystem switch libary, implement ls and fsload commands" and 3f83c87 "fs: fix number base behaviour change in fatload/ext*load". In the result, the load command would always require an explicit "0x" prefix for regular (i. e. base 16 formatted) input. Change this to use the standard notation of base 16 input format. While strictly speaking this is a change of the user interface, we hope that it will not cause trouble. Stephen Warren comments (see [1]): I suppose you can change the behaviour if you want; anyone writing "0x..." for their values presumably won't be affected, and if people really do assume all values in U-Boot are in hex, presumably nobody currently relies upon using non-prefixed values with the generic load command, since it doesn't work like that right now. [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/171172 Acked-by: Tom Rini <trini@ti.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
* mtd: Fix function description in part_validate commentOtavio Salvador2013-10-071-4/+3
| | | | | | | | The part_validate comment had a wrong description of the actions it does and referenced to non-existent functions while in fact it calls 'part_validate_eraseblock()'. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* usb:gadget:Remove redundant #includes for USB composite gadget and its functionsLukasz Majewski2013-09-242-4/+0
| | | | | | | | | | Only the <linux/usb/gadget.h> requires error.h include. Hence, several includes of error.h at USB gadget functions are not needed. Moreover unnecessary malloc.h includes were also removed. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de>
* dfu: Extract common DFU code to handle "dfu_alt_info" environment variableLukasz Majewski2013-09-241-14/+2
| | | | | | | | | | | New dfu_init_env_entities() function has been extracted from cmd_dfu.c and stored at dfu core. This is a dfu centric code, so it shall be processed in the core. Change-Id: I756c5de922fa31399d8804eaadc004ee98844ec2 Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Heiko Schocher <hs@denx.de>
* cmd_pxe.c: Pass along 'cmdtp' to do_bootm()/do_bootz()Tom Rini2013-09-241-10/+10
| | | | | | | | | | When we call do_bootm() with a vmlinuz, this would lead to a NULL pointer dereference, and after talking with Wolfgang the right thing to do here for now is to make sure that we pass cmdtp to these functions rather than NULL. Reported-by: Steven A. Falco <stevenfalco@gmail.com> Signed-off-by: Tom Rini <trini@ti.com>
* cmd_bootm.c: Only pass BOOTM_STATE_OS_CMDLINE on PowerPC/MIPSTom Rini2013-09-231-1/+4
| | | | | | | | | | | | In 5c427e4 we pass BOOTM_STATE_OS_CMDLINE as part of the bootm states to run, on all arches. However, this is only valid / useful on PowerPC and MIPS, and causes a problem on ARM where we specifically do not use it. Rather than make this state fake pass like we do for GO on some arches (which need updating to use the GO state), we should just not pass CMDLINE except when it may be used, like before. Tested-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini2013-09-201-1/+16
|\
| * spl_mmc: only call printf or puts with CONFIG_SPL_LIBCOMMON_SUPPORTPaul Burton2013-09-171-0/+16
| | | | | | | | | | | | | | If we don't have CONFIG_SPL_LIBCOMMON_SUPPORT defined then stdio functions are unavailable & calling them will cause a link failure. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
| * spl: remove unnecessary (& ARM specific) include of asm/utils.hPaul Burton2013-09-171-1/+0
| | | | | | | | | | | | | | ARM is the only architecture which includes this header and nothing in spl_mmc.c makes use of it. Remove the include. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
* | FIT: delete unnecessary castsMasahiro Yamada2013-09-203-7/+3
| | | | | | | | | | | | | | | | Becuase fdt_check_header function takes (const void *) type argument, the argument should be passed to it without being casted to (char *). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | cosmetic: FIT: fix typos in commentsMasahiro Yamada2013-09-201-2/+2
| | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
* | Cosmetic: Fix a number of typos, no functional changes.Robert P. J. Day2013-09-201-1/+1
| | | | | | | | | | | | | | Fix various misspellings of things like "environment", "kernel", "default" and "volatile", and throw in a couple grammar fixes. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
* | Fix loading freeze when netconsole is activeFrederic Leroy2013-09-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Netconsole calls eth_halt() before giving control to another operating system. But the state machine of netconsole don't take it into account. Thus, netconsole calls network functions of an halted network device, making the whole system freeze. Rather than modifying the state machine of netconsole, we just unregister the current network device before booting. It does work because nc_send_packet() verifies that the current network device is not null. Signed-off-by: Frédéric Leroy <fredo@starox.org>
OpenPOWER on IntegriCloud