summaryrefslogtreecommitdiffstats
path: root/common/board_f.c
Commit message (Collapse)AuthorAgeFilesLines
* x86: Allow use of serial soon after relocationSimon Glass2016-03-171-0/+7
| | | | | | | | | | | | | | | At present on x86 machines with use cache-as-RAM, the memory goes away just before board_init_r() is called. This means that serial drivers are no-longer unavailable, until initr_dm() it called, etc. Any attempt to use printf() within this period will cause a hang. To fix this, mark the serial devices as 'unavailable' when it is no-longer available. Bring it back when serial_initialize() is called. This means that the debug UART will be used instead for this period. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* timer: Set up the real timer after driver model is availableSimon Glass2016-02-261-0/+6
| | | | | | | | | When using the early timer, we need to manually trigger setting up the real timer. This will not happen automatically. Do this immediately after starting driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Remove unused CONFIG_MODEM_SUPPORT option and associated dead code.David Müller (ELSOFT AG)2016-02-081-3/+0
| | | | Signed-off-by: David Müller <d.mueller@elsoft.ch>
* dm: common: Add memory reservation for the video uclassSimon Glass2016-01-201-12/+35
| | | | | | | | | | | | | Before relocation we need to reserve memory for the video driver frame buffers so that they can use this memory when they start up (after relocation). Add a call to the uclass to permit this. The current top and bottom of the region is stored in global_data so that it can be checked post-relocation to ensure enough memory is available. No video device should be probed before relocation. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
* common: Move LCD and video memory reservation togetherSimon Glass2016-01-201-14/+14
| | | | | | | | These two functions are conceptually the same. Move them together in the pre-relocation init. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
* common: Rewrite hiding the end of memoryYork Sun2015-12-151-8/+15
| | | | | | | | | | | As the name may be confusing, the CONFIG_SYS_MEM_TOP_HIDE reserves some memory from the end of ram, tracked by gd->ram_size. It is not always the top of u-boot visible memory. Rewrite the macro with a weak function to provide flexibility for complex calcuation. Legacy use of this macro is still supported. Signed-off-by: York Sun <yorksun@freescale.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Reserve secure memoryYork Sun2015-12-151-0/+9
| | | | | | | | | | | | | | | Secure memory is at the end of memory, separated and reserved from OS, tracked by gd->secure_ram. Secure memory can host MMU tables, security monitor, etc. This is different from PRAM used to reserve private memory. PRAM offers memory at the top of u-boot memory, not necessarily the real end of memory for systems with very large DDR. Using the end of memory simplifies MMU setup and avoid memory fragmentation. "bdinfo" command shows gd->secure_ram value if this memory is marked as secured. Signed-off-by: York Sun <yorksun@freescale.com>
* common: Remove timer_init() call for x86Bin Meng2015-12-091-1/+1
| | | | | | | | With driver model timer support, there should not be an explict call to timer_init(). Remove this call for x86. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* common: board: Dont relocate FDT incase of CONFIG_OF_EMBEDSiva Durga Prasad Paladugu2015-12-051-0/+4
| | | | | | | | | | | | | | | | Don't relocate fdt in case of CONFIG_OF EMBED as the fdt is already embedded with u-boot image. Update fdt_blob after relocation as the fdt will be copied during u-boot relocation. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> (QEMU x86) Tested-by: Thomas Chou <thomas@wytron.com.tw> (Nios2) Acked-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Simon Glass <sjg@chromium.org>
* sparc: Update PROM initialization code for generic boardFrancois Retief2015-12-031-0/+17
| | | | | | | | | | Fixed the prom_relocate() function in start.S file by reserving memory in the board_init_f sequence and saving the offset to the __prom_start_reloc variable. This value is used as the destination when relocating the PROM. Add the prom_init() function to the end of the board_init_r sequence. Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
* sparc: Update cpu_init.c to use generic timer infrastructureFrancois Retief2015-12-031-1/+2
| | | | | | | | | | | Introduce the CONFIG_SYS_TIMER_* macros in include/asm/config.h to make use of the generic timer infrastructure in lib/time.c. Created a timer_init() function to initialize the timer hardware and update the #ifdef in board_init_f to allow this function to be called during the start-up sequence. Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
* console: Add a console bufferSimon Glass2015-11-191-0/+10
| | | | | | | | | | | | | | | | | | | It is useful to be able to record console output and provide console input via a buffer. This provides sandbox with the ability to run a command and check its output. If the console is set to silent then no visible output is generated. This also provides a means to fix the problem where tests produce unwanted output, such as errors or warnings. This can be confusing. We can instead set the console to silent and record this output. It can be checked later in the test if required. It is possible that this may prove useful for non-test situations. For example the console output may be suppressed for normal operations, but recorded and stored for access by the OS. That feature is not implemented at present. Signed-off-by: Simon Glass <sjg@chromium.org>
* Move console definitions into a new console.h fileSimon Glass2015-11-191-0/+1
| | | | | | | | The console includes a global variable and several functions that are only used by a small subset of U-Boot files. Before adding more functions, move the definitions into their own header file. Signed-off-by: Simon Glass <sjg@chromium.org>
* common/board_f.c: move mark_bootstage after arch_cpu_init_dmThomas Chou2015-11-191-1/+1
| | | | | | | | | As mark_bootstage() uses timer, it should go after driver model is initialized. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Move timer_init() call a bit earlierBin Meng2015-11-131-1/+1
| | | | | | | | | | Currently timer_init() is called in board_r.c which is quite late. Some vgabios execution requires we set up the i8254 timer correctly, but video initialization comes before timer_init(). Move the call to board_f.c. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* common: Simplify get_clocks() #ifdefPeng Fan2015-11-121-4/+1
| | | | | | | | | | | | | | | | | get_clocks is wrapped by CONFIG_FSL_CLK and CONFIG_M68K in seperate piece code. They can be merged into one snippet. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: "angelo@sysam.it" <angelo@sysam.it> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: "Andreas Bießmann" <andreas.devel@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Angelo Dureghello <angelo@sysam.it>
* Merge branch 'master' of git://git.denx.de/u-boot-niosTom Rini2015-11-061-2/+2
|\
| * nios2: use common sequence for reserve_ubootThomas Chou2015-11-061-2/+2
| | | | | | | | | | | | | | Use common sequence for reserve_uboot, as the result is the same. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
* | common/board_f: enable setup_board_part1() for MIPSDaniel Schwierzeck2015-11-061-2/+6
|/ | | | | | | | | | | | The variables bd_t:bi_memstart and bd_t:bi_memsize have to be initialized also on MIPS. Otherwise LMB and cmd_bdinfo do not correctly work. This currently breaks the booting of FIT images on MIPS. Enable the board_init_f hook setup_board_part1() for MIPS to fix this. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* common/board_f.c: change the macro name and remove it for PPC platformsGong Qianyu2015-10-291-1/+1
| | | | | | | | | | For most PPC platforms, they will call the first get_clocks() in init_sequence_f[] as they define CONFIG_PPC. CONFIG_SYS_FSL_CLK is then defined to call the second get_clocks(), which should be redundant for PPC. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* common/board_f.c: modify the macro to use get_clocks() more commonGong Qianyu2015-10-241-1/+1
| | | | | | get_clocks() should not be limited by ESDHC. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
* Move board_init_f_mem() into a common locationSimon Glass2015-10-241-29/+0
| | | | | | | | | This function will be used by both SPL and U-Boot proper. So move it into a common place. Also change the #ifdef so that the early malloc() area is not set up in SPL if CONFIG_SYS_SPL_MALLOC_START is defined. In that case it would never actually be used, and just chews up stack space. Signed-off-by: Simon Glass <sjg@chromium.org>
* nios2: convert altera timer to driver modelThomas Chou2015-10-231-2/+1
| | | | | | | Convert altera timer to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Chin Liang See <clsee@altera.com>
* nios2: Switch to generic timerThomas Chou2015-10-231-1/+2
| | | | | | | | Zap almost all of the ad-hoc timer code from interrupts.c and use the code in lib/time.c instead. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
* NDS32: Generic Board Support and UnsupportKun-Hua Huang2015-08-281-2/+6
| | | | | | Add nds32 ag101p generic board support. Signed-off-by: Kun-Hua Huang <kunhua@andestech.com>
* x86: fsp: Delay x86_fsp_init() call a little bitBin Meng2015-08-261-3/+3
| | | | | | | | Move x86_fsp_init() call after initf_malloc() so that we can fix up the gd->malloc_limit later. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* Revert "Align global_data to a 16-byte boundary"Simon Glass2015-08-171-1/+0
| | | | | | | | | | This causes widespread breakage due to the operation of the low-level code in crt0.S and cro0_64.S for ARM at least. The fix is not complicated but it seems safer to revert this for now. This reverts commit 2afddae07523f23f77acd066ad1719f53d289f98. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Switch to using generic global_data setupSimon Glass2015-08-141-1/+2
| | | | | | | | | | | There is quite a bit of assembler code that can be removed if we use the generic global_data setup. Less arch-specific code makes it easier to add new features and maintain the start-up code. Drop the unneeded code and adjust the hooks in board_f.c to cope. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Allow arch-specific setting of global_data in board_init_f_mem()Simon Glass2015-08-141-2/+11
| | | | | | | | | | | | | At present we have a simple assignment to gd. With some archs this is implemented as a register or through some other means; a simple assignment does not suit in all cases. Change this to a function and add documentation to describe how this all works. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <yorksun@freescale.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Align global_data to a 16-byte boundarySimon Glass2015-08-141-0/+1
| | | | | | | | Some archs like to have larger alignment for their global data. Use 16 bytes which suits all current archs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* common: Display >=4GiB memory bank sizeBin Meng2015-08-141-1/+2
| | | | | | | | bd->bi_dram[] has both start address and size defined as 32-bit, which is not the case on some platforms where >=4GiB memory bank is used. Change them to support such memory banks. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* Add a way to skip relocationSimon Glass2015-08-051-0/+9
| | | | | | | | | | | When running U-Boot as an EFI application we cannot relocate since we do not have relocation information. U-Boot has already been relocated to a suitable address. Add a global_data flag to control skipping relocation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* efi: Avoid using non-existent text baseBen Stoltz2015-08-051-3/+4
| | | | | | | | | | | | | When U-Boot runs as an EFI application is does not have a definition of CONFIG_SYS_TEXT_BASE. U-Boot is a relocatable application and the relocation is done by EFI. U-Boot can be loaded at any address. This is similar to how sandbox works. Adjust the early board init to deal with this. Signed-off-by: Ben Stoltz <stoltz@google.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: fsp: Move FspInitEntry call to board_init_f()Bin Meng2015-07-141-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | The call to FspInitEntry is done in arch/x86/lib/fsp/fsp_car.S so far. It worked pretty well but looks not that good. Apart from doing too much work than just enabling CAR, it cannot read the configuration data from device tree at that time. Now we want to move it a little bit later as part of init_sequence_f[] being called by board_init_f(). This way it looks and works better in the U-Boot initialization path. Due to FSP's design, after calling FspInitEntry it will not return to its caller, instead it jumps to a continuation function which is given by bootloader with a new stack in system memory. The original stack in the CAR is gone, but its content is perserved by FSP and described by a bootloader temporary memory HOB. Technically we can recover anything we had before in the previous stack, but that is way too complicated. To make life much easier, in the FSP continuation routine we just simply call fsp_init_done() and jump back to car_init_ret() to redo the whole board_init_f() initialization, but this time with a non-zero HOB list pointer saved in U-Boot's global data so that we can bypass the FspInitEntry for the second time. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Tested-by: Simon Glass <sjg@chromium.org>
* Fix comment nits in board_f.cSimon Glass2015-04-291-5/+4
| | | | | | | Try to make it a little clearer. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Move initf_malloc() to a common placeSimon Glass2015-04-231-11/+1
| | | | | | | To allow this function to be used from SPL, move it to the malloc() code. Signed-off-by: Simon Glass <sjg@chromium.org>
* fdt: Rename setup_fdt() and make it prepare alsoSimon Glass2015-04-231-4/+1
| | | | | | | There is little reason to split these two functions. Bring them together which simplifies the init sequence. Signed-off-by: Simon Glass <sjg@chromium.org>
* fdt: sandbox: Move setup code from board_f to fdtdecSimon Glass2015-04-231-65/+2
| | | | | | | We want to be able to set up the device tree in SPL, so move this code to a common place. Signed-off-by: Simon Glass <sjg@chromium.org>
* common: Make sure arch-specific map_sysmem() is definedJoe Hershberger2015-04-181-0/+1
| | | | | | | | | | | In the case where the arch defines a custom map_sysmem(), make sure that including just mapmem.h is sufficient to have these functions as they are when the arch does not override it. Also split the non-arch specific functions out of common.h Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* dm: Add a new CPU init function which can use driver modelSimon Glass2015-04-161-0/+6
| | | | | | | | | | | Since driver model is set up after arch_cpu_init(), that function cannot use drivers. Add a new arch_cpu_init_dm() function which is called immediately after driver model is ready, and can reference devices. This can be used to probe essential devices for the CPU. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* arc: clean-up init procedureAlexey Brodkin2015-04-031-4/+4
| | | | | | | | | | | | | | | | Intention behind this work was elimination of as much assembly-written code as it is possible. In case of ARC we already have relocation fix-up implemented in C so why don't we use C for U-Boot copying, .bss zeroing etc. It turned out x86 uses pretty similar approach so we re-used parts of code in "board_f.c" initially implemented for x86. Now assembly usage during init is limited to stack- and frame-pointer setup before and after relocation. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Simon Glass <sjg@chromium.org>
* m68k: fix 3 broken boardsangelo@sysam.it2015-03-281-2/+2
| | | | | | | | | | | Fix eb_cpu5282 and eb_cpu5282_internal unresolved external error. These boards have video but don't need any ppc related video_setmem(). Fix M53017EVB moving away embedded env to a different offset, as in M52277EVB. Signed-off-by: Angelo Dureghello <angelo@sysam.it>
* common/board_f: move board_init_f_mem() from #else CONFIG_X86Alexey Brodkin2015-03-281-2/+4
| | | | | | | | | | | | | | | | | | | | Purpose of this change is to make it possible to re-use code currently used on X86 solely for other architectures. For example: * init_sequence_f_r * board_init_f_r Even though board_init_f_mem() has nothing to do with any particular architecture it won't work (at least in current implementation) for X86. This is because on X86 "gd" is an alias to function get_fs_gd_ptr(), thus we cannot assign anything to it. So this change separates selection of board_init_f_mem() from X86 while keeping it disabled for X86 still. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-03-181-1/+2
|\
| * common/board_f.c: Enable IMX watchdog in init_func_watchdog_init()Stefan Roese2015-03-131-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Without this patch, the IMX watchdog will not be initialized. And therefor not active. This patch fixes this by calling hw_watchdog_init() also when CONFIG_IMX_WATCHDOG is defined. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-03-101-0/+12
|\ \ | | | | | | | | | | | | | | | | | | Conflicts: README Signed-off-by: Tom Rini <trini@konsulko.com>
| * | common: board: support systems with where RAM ends beyond 4GBStephen Warren2015-03-041-0/+12
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some systems have so much RAM that the end of RAM is beyond 4GB. An example would be a Tegra124 system (where RAM starts at 2GB physical) that has more than 2GB of RAM. In this case, we can gd->ram_size to represent the actual RAM size, so that the actual RAM size is passed to the OS. This is useful if the OS implements LPAE, and can actually use the "extra" RAM. However, U-Boot does not implement LPAE and so must deal with 32-bit physical addresses. To this end, we enhance board_get_usable_ram_top() to detect the "over-sized" case, and limit the relocation addres so that it fits into 32-bits of physical address space. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | common/board_f: implement type casting for gd structureAlexey Brodkin2015-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of global data structure defined as "register volatile" compiler throws an warning about incorrect type used: --->8--- common/board_f.c: In function "board_init_f_r": common/board_f.c:1073:2: warning: passing argument 1 of "&board_init_r +(sizetype)gd->reloc_off" discards "volatile" qualifier from pointer target type [enabled by default] (board_init_r + gd->reloc_off)(gd, gd->relocaddr); ^ common/board_f.c:1073:2: note: expected "struct gd_t *" but argument is of type "volatile struct gd_t *" --->8--- An obvious fix is manual casting to "gd_t *". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@ti.com> Acked-by: Simon Glass <sjg@chromium.org>
* | m68k: Add generic board support for MCF547X/8X and MCF5445XAlison Wang2015-03-051-0/+8
| | | | | | | | | | | | | | | | This patch adds generic board support for MCF547X/8X and MCF5445X. It is based on the patch about common generic board support for M68K architecture sent by Angelo. Signed-off-by: Alison Wang <alison.wang@freescale.com>
* | m68k: add generic-board supportangelo@sysam.it2015-03-051-6/+16
|/ | | | | | Add generic-board support for the m68k architecture. Signed-off-by: Angelo Dureghello <angelo@sysam.it>
OpenPOWER on IntegriCloud