summaryrefslogtreecommitdiffstats
path: root/board
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/corenet_ds: revise platform dependent parametersYork Sun2011-03-051-4/+4
| | | | | | | | This patch revised clk_adjust and wrlvl_start timings for corenet_ds, based on testing on Virtium VL33B5163F-K9S and Kingston KVR1333D3Q8R9S/4G. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* corenet_ds: pick the middle value for all tested timing parametersYork Sun2011-03-051-40/+18
| | | | | | | | | | | For DDR3 controller, the clk_adjust and wrlvl_start are platform-dependent. The best values should be picked up from the middle of all working combinations. This patch updates the table with confirmed values tested on Hynix dual-rank UDIMMs (HMT125U7BFR8C-H9) at 1300MT/s, 1200MT/s, 1000MT/s, 900MT/s, 800MT/s and Kingston quad-rank RDIMMs (KVR1333D3Q8R9S/4G) at 1300MT/s, 1200MT/s, 1000MT/s. Signed-off-by: York Sun <yorksun@freescale.com>
* Pantheon: Add Board Support for Marvell dkb boardLei Wen2011-02-212-0/+105
| | | | | | | | | | | | | | | | | | | | | | | | DKB is a Development Board for PANTHEON TD/TTC(pxa920/pxa910) with * Processor upto 806Mhz * LPDDR1/2 * x8/x16 SLC/MLC NAND * Footprints for eMMC & MMC x8 card With Peripherals: * Parallel LCD I/F * Audio codecs (88PM8607) * MIPI CSI-2 camera * Marvell 88W8787 802.11n/BT module * Marvell 2G/3G RF * Dual analog mics & speakers, headset jack, LED, ambient * USB2.0 HS host, OTG (mini AB) * GPIO, GPIO expander with DIP switches for easier selection * UART serial over USB, CIR This patch adds basic board support with DRAM and UART functionality Signed-off-by: Lei Wen <leiwen@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* arm: Tegra2: Add support for NVIDIA Seaboard boardTom Warren2011-02-211-0/+50
| | | | Signed-off-by: Tom Warren <twarren@nvidia.com>
* arm: Tegra2: Add support for NVIDIA Harmony boardTom Warren2011-02-211-0/+50
| | | | Signed-off-by: Tom Warren <twarren@nvidia.com>
* arm: Tegra2: Add basic NVIDIA Tegra2 SoC supportTom Warren2011-02-211-0/+193
| | | | Signed-off-by: Tom Warren <twarren@nvidia.com>
* mx31pdk: Make the full boot log visibleFabio Estevam2011-02-211-1/+6
| | | | | | Use board_early_init_f so that the full boot log output can be displayed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx31pdk: Use the new relocation schemeFabio Estevam2011-02-211-2/+8
| | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* EfikaMX: switch to MACH_TYPE_MX51_EFIKAMXLoïc Minier2011-02-211-1/+1
| | | | | | | Upstream linux moved from MACH_TYPE_MX51_LANGE51 to MACH_TYPE_MX51_EFIKAMX. Signed-off-by: Loïc Minier <loic.minier@linaro.org>
* Merge branch 'master' of git://git.denx.de/u-boot-mipsWolfgang Denk2011-02-124-50/+2
|\
| * MIPS: Move Inca-IP targets to boards.cfgShinya Kuribayashi2011-02-051-1/+1
| | | | | | | | | | | | At the same time, fix up CPU_CLOCK_RATE to have the CONFIG_ prefix to work with boards.cfg. Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
| * MIPS: dbau1x00: Remove unused flash driver stubDaniel Schwierzeck2011-02-052-44/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All dbau1x00 boards use the CFI driver so this stub driver is useless and should not be compiled. This patch fixes the error: u-boot-git/board/dbau1x00/flash.c:34: multiple definition of `flash_init' drivers/mtd/libmtd.o:u-boot-git/drivers/mtd/cfi_flash.c:2084: first defined here board/dbau1x00/libdbau1x00.o: In function `write_buff': u-boot-git/board/dbau1x00/flash.c:40: multiple definition of `write_buff' drivers/mtd/libmtd.o:u-boot-git/drivers/mtd/cfi_flash.c:1265: first defined here Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
| * MIPS: Purple: Fix multiple definition error on final linking of u-boot binaryDaniel Schwierzeck2011-02-051-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The linker of recent toolchains complains about multiple definitions on final linking of u-boot binary. This patch removes all redundant object files from u-boot.lds those are already added to .text section by the linker. That patch could not be tested but the resulting u-boot.map still looks good. The start symbol is at 0xB0000000, the environment at 0xB0008000 so u-boot should boot. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
* | sc520: Move RAM sizing code from asm to CGraeme Russ2011-02-122-11/+0
| |
* | eNET: General code cleanupGraeme Russ2011-02-122-20/+4
| |
* | eNET: Rearrange PAR assignmentsGraeme Russ2011-02-121-15/+46
| |
* | eNET: Define MMCR values in config.hGraeme Russ2011-02-122-46/+63
| |
* | eNET: Fix eNET Interrupt Setup for LinuxGraeme Russ2011-02-121-6/+9
| | | | | | | | | | Fix minor issues with the configuration of the hardware interrupts for Linux when booting the eNET board
* | sc520: Move board specific settings to board init functionGraeme Russ2011-02-121-0/+9
| |
* | sc520: Define MMCR address in include fileGraeme Russ2011-02-121-3/+4
| |
* | x86: Make cpu init functions weakGraeme Russ2011-02-121-22/+0
| |
* | x86: Parametize values used in linker scriptGraeme Russ2011-02-121-0/+1
| |
* | eNET: Create distinct board configurationsGraeme Russ2011-02-121-1/+0
| | | | | | | | | | | | Position independant functionality is due for removal from the x86 architecture, so create two distinct configurations - One for Flash and one for SRAM
* | x86: Align config.mk and linker scripts with other archesGraeme Russ2011-02-122-108/+0
| |
* | fsl: update CRC after setting EEPROM identifierTimur Tabi2011-02-091-0/+1
| | | | | | | | | | | | | | | | | | | | The "mac id" command is used to initialize the EEPROM data to a specific format, but it was not updating the CRC. This didn't cause any real problems, because writing the data to the EEPROM will always update the CRC anyway, but it did result in a bogus CRC warning. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Merge branch 'next' of git://git.denx.de/u-boot-niosWolfgang Denk2011-02-092-0/+12
|\ \
| * | nios2: add gpio_is_validThomas Chou2011-02-082-0/+7
| | | | | | | | | | | | | | | Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
| * | nios2: add gpio_freeThomas Chou2011-02-081-0/+5
| |/ | | | | | | | | Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2011-02-099-158/+540
|\ \ | |/ |/|
| * ppc4xx: Add DLVision-10G board supportDirk Eibach2011-02-079-158/+540
| | | | | | | | | | | | | | | | | | | | Board support for the Guntermann & Drunck DLVision-10G. Adds support for multiple FPGAs per board for gdsys 405ep architecture. Adds support for dual link osd hardware for gdsys 405ep. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-shWolfgang Denk2011-02-0418-322/+1253
|\ \ | |/ |/|
| * sh: sh7785lcr: Fix out of tree buildingNobuhiro Iwamatsu2011-02-031-2/+6
| | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: add support for sh7757lcr boardYoshihiro Shimoda2011-02-025-0/+1265
| | | | | | | | | | | | | | | | | | | | | | | | | | The R0P7757LC0030RL board has SH7757, 256MB DDR3-SDRAM, SPI ROM, Ethernet, and more. This patch supports the following functions: - 256MB DDR3-SDRAM - SPI ROM - Ethernet Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Remove config.mk for shmin boardNobuhiro Iwamatsu2011-02-021-27/+0
| | | | | | | | | | | | | | Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the unnecessary config.mk file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Remove config.mk for espt boardNobuhiro Iwamatsu2011-02-021-9/+0
| | | | | | | | | | | | | | Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the unnecessary config.mk file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Remove config.mk for mpr2 boardNobuhiro Iwamatsu2011-02-021-37/+0
| | | | | | | | | | | | | | Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the unnecessary config.mk file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Remove config.mk for ms7750se boardNobuhiro Iwamatsu2011-02-021-23/+0
| | | | | | | | | | | | | | Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the unnecessary config.mk file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Remove config.mk for ms7722se boardNobuhiro Iwamatsu2011-02-021-31/+0
| | | | | | | | | | | | | | Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the unnecessary config.mk file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Remove config.mk for ms7720se boardNobuhiro Iwamatsu2011-02-021-34/+0
| | | | | | | | | | | | | | Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the unnecessary config.mk file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Remove config.mk for sh7785lcr boardNobuhiro Iwamatsu2011-02-021-31/+0
| | | | | | | | | | | | | | Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the unnecessary config.mk file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Remove config.mk for sh7763rdp boardNobuhiro Iwamatsu2011-02-021-11/+0
| | | | | | | | | | | | | | Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the unnecessary config.mk file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Remove config.mk for rsk7203 boardNobuhiro Iwamatsu2011-02-021-28/+0
| | | | | | | | | | | | | | Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the unnecessary config.mk file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Remove config.mk for r7780mp boardNobuhiro Iwamatsu2011-02-021-27/+0
| | | | | | | | | | | | | | Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the unnecessary config.mk file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Remove config.mk for r2dplus boardNobuhiro Iwamatsu2011-02-021-23/+0
| | | | | | | | | | | | | | Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the unnecessary config.mk file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Remove config.mk for ap325rxa boardNobuhiro Iwamatsu2011-02-021-26/+0
| | | | | | | | | | | | | | Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the unnecessary config.mk file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Remove config.mk for MigoR boardNobuhiro Iwamatsu2011-02-021-31/+0
| | | | | | | | | | | | | | Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the unnecessary config.mk file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | armv7: add support for s5pc210 universal boardMinkyu Kang2011-02-024-0/+730
| | | | | | | | | | | | | | This patch adds support for Samsung s5pc210 universal board Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* | arm: a320evb: fixes for relocation supportPo-Yu Chuang2011-02-022-37/+1
| | | | | | | | | | | | | | | | | | * add CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_INIT_SP_ADDR * do not update gd->bd in dram_init() because bd is unavailable then * move CONFIG_SYS_TEXT_BASE from config.mk to a320evb.h * remove config.mk Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
* | DaVinci DM6467: Enhance board SupportSandeep Paulraj2011-02-021-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | Support for DM6467 was incomplete and the build failed as well. Patches were sent to the list but have not been added. This enhances the DM6467 support. Some more patches will need to be sent to bring it in line with what is available in internal TI trees Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | DM365: Fix Build ErrorSandeep Paulraj2011-02-021-1/+1
| | | | | | | | | | | | | | | | | | After the merger of the next branch, the DM365 was broken. A function used only by DA8xx based SOCs was being incorrectly called. So fix it. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
OpenPOWER on IntegriCloud