summaryrefslogtreecommitdiffstats
path: root/board
Commit message (Collapse)AuthorAgeFilesLines
* ti_omap5_common: Find right dtb file for DRA72-RevC EvmLokesh Vutla2016-07-011-3/+7
| | | | | | DRA72-Evm revC uses dra72-evm-revc.dtb. Update the same in env vatiables. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: AM437x: Align HS device variant defconfig filenameAndreas Dannenberg2016-07-011-1/+2
| | | | | | | | | | | | | | Align the name of the defconfig file for high-security (HS) device variants from the AM43xx family of SoCs with the corresponding name used for the general purpose devices. This allows for easier cross-association of those files and also provides room to grow from an HS device part number perspective. Furthermore, update and cleanup associated MAINTAINERS file. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Madan Srinivas <madans@ti.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-06-281-5/+7
|\
| * armv8: ls1043aqds: use configurable clockQianyu Gong2016-06-281-0/+4
| | | | | | | | | | | | | | Get the clocks from FPGA through I2C, if IFC is disabled. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1043aqds: fix to get boot device info from FPGAQianyu Gong2016-06-241-5/+3
| | | | | | | | | | | | | | | | The LBMAP switches on the board will tell which boot device is used. Only QSPI boot is supported if the boot device is IFCCard. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | Kconfig: make NOR_BOOT a common optionPeng Fan2016-06-271-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not only am335x supports booting from NOR, i.MX6 SoCs also supports booting from NOR. Make NOR_BOOT a common option to let different SoCs share it. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Christophe Ricard <christophe-h.ricard@st.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Francois Retief <fgretief@spaceteq.co.za> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | maintainers: new email addressSteve Rae2016-06-2712-12/+12
| | | | | | | | | | | | Update the email address for the boards that I maintain. Signed-off-by: Steve Rae <steve.rae@raedomain.com>
* | arm: at91: taurus/axm: add DM and DTS supportHeiko Schocher2016-06-261-0/+25
| | | | | | | | | | | | | | | | | | | | add DM and DTS support for the at91 based siemens boards. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebased on current ToT] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
* | arm: at91: smartweb: add DM and DTS supportHeiko Schocher2016-06-261-6/+26
| | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebased on current ToT] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
* | corvus DTS / DM supportHeiko Schocher2016-06-261-3/+38
| | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebase on current ToT, don't delete gurnard DTB creation] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
* | board/BuR: rename kwb board to brxre1Hannes Schmelzer2016-06-246-12/+12
| | | | | | | | | | | | | | Rename B&R kwb board to brxre1 Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board/BuR: rename tseries board to brppt1Hannes Schmelzer2016-06-246-13/+13
| | | | | | | | | | | | | | Rename B&R tseries board to brppt1 Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Tom Rini <trini@konsulko.com>
* | hush: complete renaming CONFIG_SYS_HUSH_PARSER to CONFIG_HUSH_PARSERMasahiro Yamada2016-06-241-2/+2
| | | | | | | | | | | | | | There is no more define of CONFIG_SYS_HUSH_PARSER. Rename some remaining references and drop the backward compatible Kconfig entry. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | board: amlogic: Rename folder for Amlogic boardsCarlo Caione2016-06-245-2/+2
|/ | | | | | | | | s/hardkernel/amlogic/ to have a single place for all the amlogic-based boards. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com>
* sunxi: Revert "sunxi: make SoC variant choice mandatory"Hans de Goede2016-06-201-0/+1
| | | | | | | | | | | | | | | | | This reverts commit 1a5f0de08e86("sunxi: make SoC variant choice mandatory"). With the optional marking in the Kconfig "make savedefconfig" will drop CONFIG_MACH_SUN4I=y from all the A10 boards, making it hard to see at a glance which family of sunxi chips the defconfig is for. This commit therefore restores the optional, and restores CONFIG_MACH_SUN4I=y to all defconfig's which had it dropped because of this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add defconfig and dts file for inet86dz boardHans de Goede2016-06-201-0/+1
| | | | | | | | | | | | | | | The inet86dz board is a board used in 7" tablets from various oems. These tablets are a23 based 7" tablets featuring a 1024x600 LCD, 512MB RAM, 4G NAND, rtl8188etv usb wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. The dts file this commit adds is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add defconfig and dts file for Polaroid MID2407PXE03 tabletHans de Goede2016-06-201-0/+1
| | | | | | | | | | | | The Polaroid MID2407PXE03 is an a23 based 7" tablet based on a M86_MB V2.0 PCB, featuring a 800x480 LCD, 512MB RAM, 4G NAND, esp8089 wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* clk: convert API to match reset/mailbox styleStephen Warren2016-06-191-5/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following changes are made to the clock API: * The concept of "clocks" and "peripheral clocks" are unified; each clock provider now implements a single set of clocks. This provides a simpler conceptual interface to clients, and better aligns with device tree clock bindings. * Clocks are now identified with a single "struct clk", rather than requiring clients to store the clock provider device and clock identity values separately. For simple clock consumers, this isolates clients from internal details of the clock API. * clk.h is split so it only contains the client/consumer API, whereas clk-uclass.h contains the provider API. This aligns with the recently added reset and mailbox APIs. * clk_ops .of_xlate(), .request(), and .free() are added so providers can customize these operations if needed. This also aligns with the recently added reset and mailbox APIs. * clk_disable() is added. * All users of the current clock APIs are updated. * Sandbox clock tests are updated to exercise clock lookup via DT, and clock enable/disable. * rkclk_get_clk() is removed and replaced with standard APIs. Buildman shows no clock-related errors for any board for which buildman can download a toolchain. test/py passes for sandbox (which invokes the dm clk test amongst others). Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2016-06-187-0/+1322
|\
| * ARM: socfpga: add support for IS1 boardPavel Machek2016-06-087-0/+1322
| | | | | | | | | | | | | | | | This adds support for IS1 board. Pretty usual socfpga board, 256MB of RAM, does not have MMC, two SPI chips, one ethernet port, two additional ethernet ports connected to the FPGA. Signed-off-by: Pavel Machek <pavel@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-06-182-0/+4
|\ \ | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
| * | usb: xhci: fsl: Add workaround for USB erratum A008751Sriram Dash2016-06-132-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is doing the following: 1. Implementing the errata for LS2080. 2. Adding fixup for fdt for LS2080. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-06-185-8/+104
|\ \ \
| * | | warp7: Add README fileMarco Franchi2016-06-181-0/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a README file for helping users to install U-Boot into the eMMC. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | | warp7: Fix watchdog resetMarco Franchi2016-06-181-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The latest version of warp7 board provides the connection of the WDOG1_B pin to the PMIC. Program the watchdog to enable the WDOG1_B output which causes a POR reset. Based on the imx7dsabresd code. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | | imx: mx6ulevk: change QSPI PAD DSE to 120ohmPeng Fan2016-06-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current pad DSE for QSPI is 60ohm. This setting cause too strong drive to clock and data signals. Need to change the DSE to 120ohm for better signal quality. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | | imx6ulevk: fix LCD_nPWREN settingPeng Fan2016-06-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Q901 is PMOS, LCD_nPWREN should be at low voltage then output is 3V3. If LCD_nPWREN is high, output is 2.4V which is not correct. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | | imx6ulevk: fix 74LV OE usagePeng Fan2016-06-181-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix 74LV OE gpio index. gpio index is wrong, so gpio output will not have effect, since we use wrong GPIO5_IO18, but not correct GPIO5_IO8. And at the end of the initialization of 74lv init, should keep OE voltage level at LOW to make 74lv output the correct voltage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | | mx7dsabresd: Fix LCD_PWR_EN output settingYe Li2016-06-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LCD_PWR_EN controls the G pin of Q13 PMOS which needs low voltage to connect D to S for outputting LCD 3.3V. If LCD_PWR_EN is high, we measured the LCD 3v3 is actually 1.2V. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | | mx6sabresd: Allow LVDS backlight to be functional after a kernel rebootMarco Franchi2016-06-181-2/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the LVDS backlight does not work in U-Boot after a “reboot” comand in the kernel. This problem occurs because the kernel uses this pin in PWM mode and U-Boot does not configure the backlight pin as GPIO functionality. So fix the problem by explicitly configuring the backlight pin as GPIO in U-Boot. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Acked-by: Stefano Babic <sbabic@denx.de> Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | | Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2016-06-18258-3776/+6106
| |\ \ \ | | |/ / | | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
* | | | Orphan dbau1x00 boardsThomas Lange2016-06-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | I no longer have access to such a board Signed-off-by: Thomas Lange <thomas@corelatus.se>
* | | | board: am437x-hs: spl: Select right dtb from fitLokesh Vutla2016-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Select a right dtb from FIT for am437x-hs platform. Reported-by: Madan Srinivas <madans@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | | ARM: dts: AM572x-IDK Initial SupportSchuyler Patton2016-06-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial DTS support for AM572-IDK evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | | board: am57xx: fit: add support for selecting dtb dynamicallyLokesh Vutla2016-06-131-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FIT allows for a multiple dtb in a single image. SPL needs away to detect the right dtb to be used. Adding support for the same for am57xx platforms. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | | board: am57xx: Rename TARGET_BEAGLE_X15 as TARGET_AM57XX_EVMLokesh Vutla2016-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | board/am57xx supports all boards based on am57xx. Rename the taget as TARGET_AM57XX_EVM. Fixes: 74cc8b097d9af ("board: ti: beagle_x15: Rename to indicate support for TI am57xx evms") Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | | armv8: s32v234: Introduce basic support for s32v234evbEddy Petrișor2016-06-137-0/+735
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial support for NXP's S32V234 SoC and S32V234EVB board. The S32V230 family is designed to support computation-intensive applications for image processing. The S32V234, as part of the S32V230 family, is a high-performance automotive processor designed to support safe computation-intensive applications in the area of vision and sensor fusion. Code originally writen by: Original-signed-off-by: Stoica Cosmin-Stefan <cosminstefan.stoica@freescale.com> Original-signed-off-by: Mihaela Martinas <Mihaela.Martinas@freescale.com> Original-signed-off-by: Eddy Petrișor <eddy.petrisor@gmail.com> Signed-off-by: Eddy Petrișor <eddy.petrisor@nxp.com>
* | | | board: arm:: Add support for Broadcom BCM23550Steve Rae2016-06-134-0/+148
| | | | | | | | | | | | | | | | | | | | | | | | Add support for the Broadcom BCM23550 board. Signed-off-by: Steve Rae <srae@broadcom.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-arcTom Rini2016-06-131-1/+1
|\ \ \ \
| * | | | board: axs10x: Flush entire cache after programming reset vectorAlexey Brodkin2016-06-131-1/+1
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now when we have support of IOC (IO-Coherency block) cahce operations on regions are tuned to not be dummy stubs if IOC was found and enabled in the core. That makes flush_dcache_range() useless for our purposes here. And since we do need to flush modified reset vector to at least L2 cache (AKA SLC) so other cores will see it via its L1 instruction cache we're using always functional flush_dcache_all() here. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Marek Vasut <marex@denx.de>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2016-06-135-0/+3097
|\ \ \ \
| * | | | arm: at91: Add support for gurnardAndre Renaud2016-06-125-0/+3097
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board is based on Snapper 9G45 which has an Atmel AT91SAM9G45 chip and 128MB of SDRAM. It includes a small LCD, 2xUSB host, SD card, Ethernet and two UARTs. Signed-off-by: Andre Renaud <andre@designa-electronics.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [apply CONFIG_BOOTDELAY transition] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
* | | | arm: dra7xx: Assign omap_vcores based on board typeKeerthy2016-06-121-0/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently omap_vcores which holds pmic data is being assigned based on the SoC type. PMIC is not a part of SoC. It is logical to to assign omap_vcores based on board type. Hence over ride the vcores_init function and assign omap_vcores based on the board type. Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
* | | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-06-1212-113/+277
|\ \ \ \ | | |/ / | |/| |
| * | | board: ge: bx50v3: don't configure the backlight when there's no displayAndrew Shadura2016-06-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Don't try to configure the backlight when CONFIG_VIDEO_IPUV3 isn't set. Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
| * | | cosmetic: mx6slevk: Minor coding-style fixSebastien Bourdelin2016-05-311-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | Fix the brace indentation in board_mmc_init(). Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
| * | | imx: mx6qsabreauto: drop duplicated net phy configurationPeng Fan2016-05-311-33/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 'commit d584c68ce0f5bf2f430ccfb2ba00bd506206fb91', ar8031 is changed to use ar8035_config. ar8035_config actually does the same thing as mx6_rgmii_rework, so drop mx6_rgmii_rework and board_phy_config. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * | | imx: ventana: add fdt fixup to enable UHS-I support on selected boardsTim Harvey2016-05-313-2/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UHS-I support is available on Ventana boards with micro-SD sockets depending on the board revision. For backwards compatibility to not break users who have old bootloaders and newer kernels the device-tree on boards with microSD disables UHS-I support by default by defining the no-1-8-v property in the esdhc controller node. For models/revisions that support switchable 1.8V/3.3V I/O which is detectable by the presence of a pull-down on the SD3_VSELECT pin we remove that property to enable support in the kernel. Additionally we add SD3_VSELECT to the pinmux for clarity (even though U-Boot does not currently support UHS-I modes requiring 1.8V I/O). Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | imx: ventana: add GW553x supportTim Harvey2016-05-315-3/+66
| | | | | | | | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | imx: ventana: remove several EEPROM config bit dependenceTim Harvey2016-05-311-31/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed several EEPROM bit dependencies: - for dt aliases that don't exist and thus don't ever do anything (pcie,lvds1,uart*,vpu,csi*,hdmi_in,hdmi_out,cvbs_in,cvbs_out,gps) - for features that don't effect bus ordering or have no detrimental affect if erroneously enabled when not present (ahci,nand,i2c*) - for features that have little to no impact on being erroneously enabled but high impact if erroneously disabled (can*, spi*) - for features that have an high adverse affect of not being set when they should and no adverse affect of being set when they shouldn't (ipu*). Removing these means the following: - these no longer are supported with the econfig command - these no longer affect the device-tree in any way Signed-off-by: Tim Harvey <tharvey@gateworks.com>
OpenPOWER on IntegriCloud