summaryrefslogtreecommitdiffstats
path: root/board/esd
Commit message (Collapse)AuthorAgeFilesLines
* net/miiphy/serial: drop duplicate "NAMESIZE" defineMike Frysinger2012-03-181-1/+1
| | | | | | | | | | A few subsystems are using the same define "NAMESIZE". This has been working so far because they define it to the same number. However, I want to change the size of eth_device's NAMESIZE, so rather than tweak the define names, simply drop references to it. Almost no one does, and the handful that do can easily be changed to a sizeof(). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* CPCI750: Add CPCI-HD/2 supportReinhard Arlt2012-03-181-1/+20
| | | | | | | | This patch adds support for the esd CPCI-HD/2 board to u-boot for CPCI-CPU/750. As the primary devices on the CPCI-HD/2 board are connected to device 1 and 3, the device must be swapped. Signed-off-by: Reinhard Arlt <reinhard.arlt@esd.eu>
* PPC: Drop mv6436x_eth_initialize() from net/eth.cMarek Vasut2012-03-062-0/+6
| | | | | | | | This function was defined as an extern in net/eth.c, drop that and use standard means of calling it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* Stop using builtin_run_command()Simon Glass2012-03-063-3/+3
| | | | | | | | | | Boards can select either the 'built-in' parser or the hush parser. We should not call builtin_run_command() if we are using the hush parser. We use run_command() instead, since it knows how to call the correct parser. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
* Rename run_command() to builtin_run_command()Simon Glass2012-03-063-3/+3
| | | | | | | | | The current run_command() is only one of the parsing options - the other is hush. We should not call run_command() when the hush parser is being used. So we rename this function to better explain its purpose. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
* pci: move pciauto_config_init() to pci.hLinus Walleij2012-03-041-1/+0
| | | | | | | | | | | | | Fixing build regressions for the Integrator I get find that a few boards try to work around the missing declaration of pciauto_config_init() by declaring it in the local scope. This does not make sense when the sibling functions are in <pci.h> so move the function to the header, ridding the build error in the Integrator and getting rid of the local declarations here and there. Reported-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* at91: modified NAND flash timing on otc570 boardDaniel Gorsulowski2012-02-271-4/+4
| | | | Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
* at91: modified NAND flash timing on meesc boardDaniel Gorsulowski2012-02-271-4/+4
| | | | Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
* Merge branch 'next' of ../nextWolfgang Denk2011-12-2324-40668/+81322
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next' of ../next: mkenvimage: Add version info switch (-V) mkenvimage: Fix getopt() error handling mkenvimage: Fix some typos phy: add Micrel KS8721BL phy definition net: introduce per device index mvgbe: remove setting of ethaddr within the driver x86: Add support for specifying an initrd with the zboot command x86: Refactor the zboot innards so they can be reused with a vboot image x86: Add infrastructure to extract an e820 table from the coreboot tables x86: Add support for booting Linux using the 32 bit boot protocol x86: Clean up the x86 zimage code in preparation to extend it x86: Import code from coreboot's libpayload to parse the coreboot table x86: Initial commit for running as a coreboot payload CHECKPATCH: ./board/esd/hh405/logo_320_240_8bpp.c CHECKPATCH: ./board/esd/hh405/logo_1024_768_8bpp.c CHECKPATCH: ./board/esd/hh405/logo_320_240_4bpp.c CHECKPATCH: ./board/esd/hh405/logo_640_480_24bpp.c CHECKPATCH: ./board/esd/apc405/logo_640_480_24bpp.c CHECKPATCH: ./board/esd/voh405/logo_320_240_4bpp.c CHECKPATCH: ./board/esd/voh405/logo_640_480_24bpp.c CHECKPATCH: ./board/esd/hh405/fpgadata.c CHECKPATCH: ./board/esd/pci405/fpgadata.c CHECKPATCH: ./board/esd/tasreg/fpgadata.c CHECKPATCH: ./board/esd/apc405/fpgadata.c CHECKPATCH: ./board/esd/voh405/fpgadata.c CHECKPATCH: ./board/esd/ash405/fpgadata.c CHECKPATCH: ./board/esd/dasa_sim/fpgadata.c CHECKPATCH: ./board/esd/ar405/fpgadata_xl30.c CHECKPATCH: ./board/esd/ar405/fpgadata.c CHECKPATCH: ./board/esd/plu405/fpgadata.c CHECKPATCH: ./board/esd/wuh405/fpgadata.c CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405.c CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405ab.c CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci4052.c CHECKPATCH: ./board/esd/canbt/fpgadata.c CHECKPATCH: ./board/esd/du405/fpgadata.c CHECKPATCH: ./board/esd/cpciiser4/fpgadata.c CHECKPATCH: ./board/dave/PPChameleonEVB/fpgadata.c avr32:mmu.c: fix printf() length modifier fat.c: fix printf() length modifier cmd_sf.c: fix printf() length modifier Make printf and vprintf safe from buffer overruns vsprintf: Move function documentation into header file Add safe vsnprintf and snprintf library functions Move vsprintf functions into their own header Conflicts: tools/mkenvimage.c Signed-off-by: Wolfgang Denk <wd@denx.de>
| * CHECKPATCH: ./board/esd/hh405/logo_320_240_8bpp.cMarek Vasut2011-12-181-521/+1042
| | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefan Roese <sr@denx.de>
| * CHECKPATCH: ./board/esd/hh405/logo_1024_768_8bpp.cMarek Vasut2011-12-181-2544/+5087
| | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefan Roese <sr@denx.de>
| * CHECKPATCH: ./board/esd/hh405/logo_320_240_4bpp.cMarek Vasut2011-12-181-227/+454
| | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefan Roese <sr@denx.de>
| * CHECKPATCH: ./board/esd/hh405/logo_640_480_24bpp.cMarek Vasut2011-12-181-4209/+8417
| | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefan Roese <sr@denx.de>
| * CHECKPATCH: ./board/esd/apc405/logo_640_480_24bpp.cMarek Vasut2011-12-181-565/+1129
| | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefan Roese <sr@denx.de>
| * CHECKPATCH: ./board/esd/voh405/logo_320_240_4bpp.cMarek Vasut2011-12-181-77/+153
| | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefan Roese <sr@denx.de>
| * CHECKPATCH: ./board/esd/voh405/logo_640_480_24bpp.cMarek Vasut2011-12-181-1722/+3443
| | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefan Roese <sr@denx.de>
| * CHECKPATCH: ./board/esd/hh405/fpgadata.cMarek Vasut2011-12-181-2517/+5034
| | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * CHECKPATCH: ./board/esd/pci405/fpgadata.cMarek Vasut2011-12-181-746/+1492
| | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * CHECKPATCH: ./board/esd/tasreg/fpgadata.cMarek Vasut2011-12-181-5331/+10661
| | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * CHECKPATCH: ./board/esd/apc405/fpgadata.cMarek Vasut2011-12-181-2004/+4008
| | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * CHECKPATCH: ./board/esd/voh405/fpgadata.cMarek Vasut2011-12-181-2011/+4021
| | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * CHECKPATCH: ./board/esd/ash405/fpgadata.cMarek Vasut2011-12-181-2492/+4983
| | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * CHECKPATCH: ./board/esd/dasa_sim/fpgadata.cMarek Vasut2011-12-181-1952/+3903
| | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * CHECKPATCH: ./board/esd/ar405/fpgadata_xl30.cMarek Vasut2011-12-181-2436/+4872
| | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * CHECKPATCH: ./board/esd/ar405/fpgadata.cMarek Vasut2011-12-181-2750/+5500
| | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * CHECKPATCH: ./board/esd/plu405/fpgadata.cMarek Vasut2011-12-181-1179/+2358
| | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * CHECKPATCH: ./board/esd/wuh405/fpgadata.cMarek Vasut2011-12-181-1818/+3636
| | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405.cMarek Vasut2011-12-181-342/+683
| | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405ab.cMarek Vasut2011-12-181-1285/+2569
| | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci4052.cMarek Vasut2011-12-181-765/+1529
| | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * CHECKPATCH: ./board/esd/canbt/fpgadata.cMarek Vasut2011-12-181-404/+807
| | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * CHECKPATCH: ./board/esd/du405/fpgadata.cMarek Vasut2011-12-181-703/+1405
| | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * CHECKPATCH: ./board/esd/cpciiser4/fpgadata.cMarek Vasut2011-12-181-2068/+4136
| | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
* | board/esd/cpci750/mv_eth.c: Fix GCC 4.6 build warningsAnatolij Gustschin2011-12-201-27/+7
|/ | | | | | | | | | | | | | | | | | | | | | | | Fix: mv_eth.c: In function 'mv64360_eth_real_open': mv_eth.c:425:6: warning: variable 'port_status' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_stop': mv_eth.c:643:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_xmit': mv_eth.c:719:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_receive': mv_eth.c:804:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_get_stats': mv_eth.c:903:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_update_stat': mv_eth.c:931:24: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] mv_eth.c:930:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_print_stat': mv_eth.c:1012:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'eth_clear_mib_counters': mv_eth.c:2069:15: warning: variable 'dummy' set but not used [-Wunused-but-set-variable Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd.eu>
* board/esd/cpci405/cpci405.c: Fix GCC 4.6 warningMatthias Fuchs2011-12-071-5/+3
| | | | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
* board/esd/dasa_sim/flash.c: Fix GCC 4.6 warningMatthias Fuchs2011-12-021-3/+0
| | | | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
* board/esd/common/xilinx_jtag_micro.c: Fix GCC 4.6 warningMatthias Fuchs2011-12-021-2/+0
| | | | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
* ppc4xx: fix PMC440 painit commandMatthias Fuchs2011-12-011-2/+15
| | | | | | | | This patch fixes the PMC440 BSP command painit. The implementation was broken since the step to the new environment handling. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: remove invalid access to PCI_BRDGOPT2 registerMatthias Fuchs2011-12-011-2/+0
| | | | | | | | | | This patch removes an invalid call to pci_write_config_dword to PCI_BRDGOPT2 register. This function must not be used from pci_target_init and is also at the wrong place. The correct call is done later in pci_target_init via pci_hose_write_config_dword. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: use CONFIG_PCI_BOOTDELAY instead of private implementationMatthias Fuchs2011-12-011-15/+0
| | | | | | | | | This patch switches PMC440 board code to the CONFIG_PCI_BOOTDELAY option instead of using a private implemention. This relies on Anatolji's patch that moves the pcidelay handling behind pci_target_init. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
* Fix Stelian's email addressStelian Pop2011-11-274-4/+4
| | | | | | | Change my old email address which is no longer valid. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* auto_update.c: Fix GCC 4.6 build warningsStefan Roese2011-11-161-7/+1
| | | | | | | | | | Fix: ../common/auto_update.c: In function 'au_check_header_valid': ../common/auto_update.c:94:16: warning: variable 'checksum' set but not used [-Wunused-but-set-variable] ../common/auto_update.c: In function 'do_auto_update': ../common/auto_update.c:400:30: warning: variable 'got_ctrlc' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
* cmd_dasa_sim.c: Fix GCC 4.6 build warningsStefan Roese2011-11-161-28/+24
| | | | | | | | | | Fix: cmd_dasa_sim.c: In function 'updatePci9054': cmd_dasa_sim.c:135:6: warning: variable 'val' set but not used [-Wunused-but-set-variable] cmd_dasa_sim.c: In function 'clearPci9054': cmd_dasa_sim.c:189:6: warning: variable 'val' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
* cmd_pci405.c: Fix GCC 4.6 build warningsStefan Roese2011-11-161-2/+1
| | | | | | | | Fix: cmd_pci405.c: In function 'do_loadpci': cmd_pci405.c:45:6: warning: variable 'status' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
* board/esd/cpci750/sdram_init.c: Fix GCC 4.6 build warningsWolfgang Denk2011-11-161-314/+193
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix: sdram_init.c: In function 'check_dimm': sdram_init.c:267:50: warning: variable 'trrd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:267:37: warning: variable 'tras_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:267:24: warning: variable 'trcd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:267:8: warning: variable 'trp_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:253:16: warning: variable 'spd_checksum' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'initdram': sdram_init.c:1693:14: warning: variable 's1' set but not used [-Wunused-but-set-variable] sdram_init.c:1693:6: warning: variable 's0' set but not used [-Wunused-but-set-variable] Biggest part o the fix is converting the custom debug code to standard debug(). No attempts were made to cleanup the code. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* board/esd/cpci750/cpci750.c: Fix error handlingWolfgang Denk2011-11-161-2/+2
| | | | | | | | | | | ThE code recorded error conditions but did not pass these on to the higher level caller. Fixing this fixes also this build warning: cpci750.c: In function 'do_loadpci': cpci750.c:569:6: warning: variable 'status' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* board/esd/pf5200/pf5200.c: Fix GCC 4.6 build warningWolfgang Denk2011-11-071-6/+4
| | | | | | | | | | Fix: pf5200.c: In function 'do_phypower': pf5200.c:330:6: warning: variable 'status' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* board/esd/cpci5200/strataflash.c: Fix GCC 4.6 build warningWolfgang Denk2011-11-071-3/+1
| | | | | | | | | | Fix: strataflash.c: In function 'flash_write_cfiword': strataflash.c:681:11: warning: variable 'ctladdr' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* GCC4.6: Squash warnings in pmc405de.cMarek Vasut2011-10-271-1/+1
| | | | | | | | | | | pmc405de.c: In function 'do_painit': pmc405de.c:444: warning: format '%08x' expects type 'unsigned int', but argument 2 has type 'phys_size_t' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
* GCC4.6: Squash warning in cmd_pmc440.cMarek Vasut2011-10-271-1/+1
| | | | | | | | | | | cmd_pmc440.c: In function 'do_painit': cmd_pmc440.c:371: warning: format '%08x' expects type 'unsigned int', but argument 2 has type 'phys_size_t' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
OpenPOWER on IntegriCloud