summaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAgeFilesLines
...
| | * | nios2: add gpio_requestThomas Chou2010-07-121-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This will be used by nand_plat. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
| | * | nios2: add fdt supportThomas Chou2010-07-121-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds fdt support to boot linux, followed Michal's work on microblaze. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
| | * | nios2: use gc sections to reduce image sizeThomas Chou2010-07-121-0/+3
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Follow the discussion of Charles Manning and Mike Frysinger. Using gc_sections helps reduce image size. Configuring for nios2-generic board... Before, text data bss dec hex filename 123979 3724 22892 150595 24c43 /tmp/u-boot/u-boot After, text data bss dec hex filename 115983 3800 22732 142515 22cb3 /tmp/u-boot/u-boot Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2010-07-145-13/+35
| |\ \
| | * | mpc8308: support for Freescale MPC8308 cpuIlya Yanok2010-07-095-13/+35
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds basic support for Freescale MPC8308 CPU. Serial ports, NOR flash and integrated Ethernet controllers are supported. PCI Express is also supported. eSDHC, NAND and USB may work but aren't tested (using ULPI PHY requires additional patch). Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk2010-07-144-2/+19
| |\ \
| | * | mvgbe: add support for orion5x GbE controllerAlbert Aribaud2010-07-123-2/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add definitions and initialization in orion5x for mvgbe. Add orion5x in mvgbe SoC includes. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | mvgbe: support SoCs other than kirkwoodAlbert Aribaud2010-07-122-2/+5
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | Rename all references to kirkwood in mvgbe symbols throughout the whole codebase. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | Blackfin: bf561: use DMA for Core B L1 regionsMike Frysinger2010-07-131-1/+9
| | | | | | | | | | | | | | | | | | | | | The L1 regions of Core B are not directly accessible from Core A, so we need to use DMA to get at them. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | Blackfin: serial: convert to portmux frameworkMike Frysinger2010-07-131-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | Use the new portmux framework to handle the details when possible. Unfortunately, we cannot yet use this in the standalone initialization logic, so we need to keep around the old portmux writes for now. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | Blackfin: unify custom gpio commandsMike Frysinger2010-07-052-0/+121
| | | | | | | | | | | | | | | | | | | | | Now that we have a unified gpio layer, the misc partial gpio commands can be unified and made complete (support all possible gpios). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | Blackfin: import gpio/portmux layer from LinuxMike Frysinger2010-07-0520-0/+3561
| | | | | | | | | | | | | | | | | | | | | | | | | | | The current pinmux handling has spread throughout Blackfin drivers and board code and is getting hideous to maintain. So import the gpio and portmux layer from the Blackfin Linux code. This should spur a serious of cleanups across the Blackfin tree. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | Blackfin: set up simple NMI handlers for anomaly 05000219Mike Frysinger2010-07-054-1/+34
| | | | | | | | | | | | | | | | | | | | | Older on-chip Blackfin bootroms do not create a dummy NMI handler, so set up one ourselves when anomaly 05000219 applies. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | Blackfin: update anomaly lists to latest sheetsMike Frysinger2010-07-055-183/+437
| | | | | | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | Blackfin: expand EVT1 usage documentation a bit moreMike Frysinger2010-07-051-1/+6
| | | | | | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | Blackfin: implement bootcount supportMike Frysinger2010-07-052-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | The default storage location for bootcount is EVT0. This version uses one 32bit value and combines the magic/count value in the upper/lower 16bits. If there is demand for more, should be easy to do. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | Blackfin: clean up trace buffer handling when crashingMike Frysinger2010-07-052-28/+49
| |/ | | | | | | | | | | | | | | | | | | Avoid banging on the trace MMRs when debugging is disabled, avoid calling the funcs multiple times in a row, disable the trace buffer earlier in the exception handler to avoid eating more user entries, and dump the buffer before calling the kgdb hook. This way we maximize useful debugging info up front rather than needing external tools (like gdb/serial/etc...). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | ARMV7: Restructure OMAP i2c driver to allow code sharing between OMAP3 and OMAP4Steve Sakoman2010-07-052-145/+78
| | | | | | | | | | | | | | This patch modifies the omap24xx driver so that it will also work with OMAP4. Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | ARMV7: Restructure OMAP mmc driver to allow code sharing between OMAP3 and OMAP4Steve Sakoman2010-07-052-242/+171
| | | | | | | | | | | | | | | | The architecture independent header is moved to drivers/mmc, and the architecture dependent headers reside in asm/arch-omap3 and asm/arch-omap4 Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | ARMV7: Add basic support for TI OMAP4Steve Sakoman2010-07-0512-2/+573
| | | | | | | | | | | | | | | | | | This patch adds minimum support for OMAP4. Code which can be shared between OMAP3 and OMAP4 is placed in arch/arm/cpu/armv7/omap-common Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7Steve Sakoman2010-07-0534-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | The purpose of this patch is to prepare for adding the OMAP4 architecture, which is Cortex A9 Cortex A8 and A9 both belong to the armv7 architecture, hence the name change. The two architectures are similar enough that substantial code can be shared. Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | OMAP: mmc: add support for second and third mmc channelsSteve Sakoman2010-07-051-3/+12
|/ | | | | | | | | | | | | | This patch adds support for the second and third mmc channels on OMAP3 processors Boards wishing to use this feature should define CONFIG_SYS_MMC_SET_DEV in the board config Tested on Overo Signed-off-by: Steve Sakoman <steve@sakoman.com> Tested-by: Philip Balister <philip@opensdr.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* Make sure that argv[] argument pointers are not modified.Wolfgang Denk2010-07-0478-97/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hush shell dynamically allocates (and re-allocates) memory for the argument strings in the "char *argv[]" argument vector passed to commands. Any code that modifies these pointers will cause serious corruption of the malloc data structures and crash U-Boot, so make sure the compiler can check that no such modifications are being done by changing the code into "char * const argv[]". This modification is the result of debugging a strange crash caused after adding a new command, which used the following argument processing code which has been working perfectly fine in all Unix systems since version 6 - but not so in U-Boot: int main (int argc, char **argv) { while (--argc > 0 && **++argv == '-') { /* ====> */ while (*++*argv) { switch (**argv) { case 'd': debug++; break; ... default: usage (); } } } ... } The line marked "====>" will corrupt the malloc data structures and usually cause U-Boot to crash when the next command gets executed by the shell. With the modification, the compiler will prevent this with an error: increment of read-only location '*argv' N.B.: The code above can be trivially rewritten like this: while (--argc > 0 && **++argv == '-') { char *arg = *argv; while (*++arg) { switch (*arg) { ... Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2010-07-046-53/+107
|\
| * ppc4xx: Cleanup Boot/FLASH TLB reassignment for PPC440/460Stefan Roese2010-07-011-15/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Background Info: Some PPC440/460 boards have caches enabled in the Boot/FLASH TLB (via init.S) to speed up the boot process. In relocate_code (start.S) the cache inhibit attribute for this TLB is set to disable cache. This is needed for the CFI FLASH driver. This patch now cleans this code up: - CONFIG_SYS_TLB_FOR_BOOT_FLASH is defined to 0 (default TLB) if not defined in the top of this file. This way, we can remove an ugly #ifdef in this code. - Replace complex "#if defined(CONFIG_440EP) || defined(CONFIG_GR)..." statement with "#if defined(CONFIG_440)". - Remove unnecessary cache invalidate calls resulting in faster bootup. Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Add DDR1/2 macros in ppc4xx-sdram.h for non-405EX as wellStefan Roese2010-07-011-1/+3
| | | | | | | | | | | | | | This patch adds some DDR(2) macros to all PPC4xx's equipped with this IBM DDR1/2 controller. Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: DDR2: Complete RDSS configuration on non-SPD based boardsStefan Roese2010-07-011-14/+38
| | | | | | | | | | | | | | | | | | As described in item #10 of the SDRAM initialization (chapter 22.2.9 of the PPC460EX/EXr/GT users manual), RDSS may need to be adjusted. The code for this is now factored out and executed for non-SPD based boards as well. Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Enable overwriting of default scan window for IBM DDR2 controllerStefan Roese2010-07-012-12/+10
| | | | | | | | | | | | | | | | | | | | | | This patch makes it possible to overwrite the default auto-calibration scan window (SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR] values) with board specific values. The parameters of the weak default function are corrected as well. This way we don't need the casts any more. This feature will be used by an upcoming PPC460GT board port. Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Enable PCIe support without PCI support on PPC440/460Stefan Roese2010-07-011-1/+11
| | | | | | | | | | | | | | | | | | | | | | By not defining CONFIG_SYS_PCI_MASTER_INIT and CONFIG_SYS_PCI_TARGET_INIT, PCI support (host and adapter) will not be enabled. But it's still possible to use the U-Boot PCI infrastructure for the PCIe ports. This configuration option is needed for a new 460GT board, which uses PCIe but has PCI disabled. Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Enable booting with Option E on 460EX/EXr/GTStefan Roese2010-07-011-10/+39
| | | | | | | | | | | | | | | | | | This patch enables booting with option E on the PPC460EX/EXr/GT. When booting with Option E, the PLL is in bypass, CPR0_PLLC[ENG]=0. The Software Boot Configuration Procedure is needed to engage the PLL and perform a chip reset. Signed-off-by: Stefan Roese <sr@denx.de>
* | USB OHCI support for at91sam9g45 SoCSergey Matyukevich2010-06-301-2/+12
|/ | | | | | | | | | Add USB OHCI support for at91sam9g45ekes/at91sam9m10g45ek boards. Note that according to errata from Atmel, OHCI is not operational on the first revision of at91sam9g45 chip. So this patch enables OHCI support for later revisions. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
* Merge branch 'master' into nextWolfgang Denk2010-06-303-9/+12
|\
| * MPC512x: workaround data corruption for unaligned local bus accessesWolfgang Denk2010-06-293-9/+12
| | | | | | | | | | | | | | | | | | | | | | Commit 460c2ce3 "MPC5200: workaround data corruption for unaligned local bus accesses" fixed the problem for MPC5200 only, but MPC512x is affected as well, so apply the same fix here, too. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
* | powerpc/bootcount: Add bootcount support for MPC512xMichael Weiss2010-06-291-0/+5
| | | | | | | | | | | | | | This also uses the breadcrumb register as on MPC5200. Signed-off-by: Michael Weiss <michael.weiss@ifm.com> Signed-off-by: Detlev Zundel <dzu@denx.de>
* | avr32: add unaligned.hAndreas Bießmann2010-06-291-0/+1
| | | | | | | | | | | | | | | | | | This patch fixes following error: zlib.c:31:27: error: asm/unaligned.h: No such file or directory Suggested-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
* | avr32: disable branch foldingAndreas Bießmann2010-06-291-3/+4
| | | | | | | | | | | | | | | | Due to a hardware bug mentioned in latest AP7000 datasheet errata (revision M from 09.09) branch folding is unreliable. This patch disables CPUCR.FE bitfield as stated in datasheet. Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
* | Fix (null) problem for AVR32 boardsReinhard Meyer (-VC)2010-06-291-2/+3
| | | | | | | | | | | | | | | | | | | | Currently the U-Boot address ranges for AVR32 boards are printed like this: "U-Boot code: (null) -> 0001183c data: 000188e8 -> 0004e9b0" This patch fixes this to print: "U-Boot code: 00000000 -> 0001183c data: 000188f8 -> 0004e9c0" Signed-off-by: Reinhard Meyer <info@emk-elektronik.de>
* | Merge branch 'next' of git://git.denx.de/u-boot-ti into nextWolfgang Denk2010-06-291-1/+1
|\ \
| * | DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config filesPrakash PM2010-06-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently EMAC_MDIO_PHY_NUM is defined as 1 in emac_defs.h. Because of this, EMAC does not work on EVMs which do not have phy connected at 1. Moving the macro to board config file makes this configurable depending on where the phy is connected on the MDIO bus. This patch fixes the board reset issue observed during network access on DM365EVM. EMAC driver was assuming EMAC_MDIO_PHY_NUM as 1 but it is 0 on DM365EVM. This patch is verified on da830/omap-l137, dm365 and dm644x evms. Signed-off-by: Prakash PM <prakash.pm@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-sh into nextWolfgang Denk2010-06-295-5/+46
|\ \ \
| * | | sh: Add trigger_address_error and support cpu resetNobuhiro Iwamatsu2010-06-284-2/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This add support cpu reset by trigger_address_error function. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | sh: Fix path of irqflags.hNobuhiro Iwamatsu2010-06-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes path of irqflags.h from linux/ to asm/. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | sh: Fix overflow problem in get_ticksNobuhiro Iwamatsu2010-06-281-2/+18
| | |/ | |/| | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | | Remove AmigaOneG3SE boardWolfgang Denk2010-06-235-27/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AmigaOneG3SE board has been orphaned or a very long time, and broken for more than 12 releases resp. more than 3 years. As nobody seems to be interested any more in this stuff we may as well ged rid of it, especially as it clutters many areas of the code so it is a continuous pain for all kinds of ongoing work. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitionsWolfgang Denk2010-06-231-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SYS_BUS_HZ has not really been used anywhere except to be redined as CONFIG_SYS_BUS_CLK; in addition, the mpc7448hpc2 had the bogus CONFIG_SYS_CONFIG_BUS_CLK setting which duplicated the funtionality. Change all this to use CONFIG_SYS_BUS_CLK consistently. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Frank Gottschling <fgottschling@eltec.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Cc: Eran Man <eran@nbase.co.il> Cc: Stefan Roese <sr@denx.de> Cc: Nye Liu <nyet@zumanetworks.com> Cc: Roy Zang <tie-fei.zang@freescale.com>
* | | Merge branch 'master' into nextWolfgang Denk2010-06-2322-131/+184
|\ \ \ | |/ / | | / | |/ |/|
| * Prepare v2010.06-rc3Wolfgang Denk2010-06-231-70/+70
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| * MPC5200: workaround data corruption for unaligned local bus accessesWolfgang Denk2010-06-233-0/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MPC5200 has a nasty problem that will cause silent data corruption when performing unaligned 16 or 32 byte accesses when reading from the local bus - typically this affects reading from flash. The problem can be easily shown: => md fc0c0000 10 fc0c0000: 323e4337 01626f6f 74636d64 3d72756e 2>C7.bootcmd=run fc0c0010: 206e6574 5f6e6673 00626f6f 7464656c net_nfs.bootdel fc0c0020: 61793d35 00626175 64726174 653d3131 ay=5.baudrate=11 fc0c0030: 35323030 00707265 626f6f74 3d656368 5200.preboot=ech => md fc0c0001 10 fc0c0001: 65636801 00000074 0000003d 00000020 ech....t...=... fc0c0011: 0000005f 00000000 00000074 00000061 ..._.......t...a fc0c0021: 00000000 00000064 00000065 00000035 .......d...e...5 fc0c0031: 00000000 00000062 0000003d 0000006f .......b...=...o => md.w fc0c0001 10 fc0c0001: 0000 3701 0000 6f74 0000 643d 0000 6e20 ..7...ot..d=..n fc0c0011: 0000 745f 0000 7300 0000 6f74 0000 6c61 ..t_..s...ot..la This commit implements a workaround at least for the most blatant problem: using memcpy() from NOR flash. We rename the assembler routine into __memcpy() and provide a wrapper, which will use a byte-wise copy loop for unaligned source or target addresses when reading from NOR flash, and branch to the optimized __memcpy() in all other cases, thus minimizing the performance impact. Tested on lite5200b and TQM5200S. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
| * ARM: remove unused VIDEOLFB ATAGMinkyu Kang2010-06-231-40/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | ATAG_VIDEOLFB is not used anywhere. The belowing warning is occurred due to this ATAG. [ 0.000000] Ignoring unrecognised tag 0x54410008 This patch fixed it. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Martin Krause <Martin.Krause@tqs.de>
| * Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2010-06-221-4/+4
| |\
OpenPOWER on IntegriCloud