summaryrefslogtreecommitdiffstats
path: root/arch/x86
Commit message (Collapse)AuthorAgeFilesLines
* x86: chromebook_link: dts: Add PCH and LPC devicesSimon Glass2015-04-183-33/+52
| | | | | | | | | | | | The PCH (Platform Controller Hub) is on the PCI bus, so show it as such. The LPC (Low Pin Count) and SPI bus are inside the PCH, so put these in the right place also. Rename the compatible strings to be more descriptive since this board is the only user. Once we are using driver model fully on x86, these will be dropped. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: Add a uclass for an Low Pin Count (LPC) deviceSimon Glass2015-04-182-0/+29
| | | | | | | | | On x86 systems this device is commonly used to provide legacy port access. It is sort-of a replacement for the old ISA bus. Add a uclass for this, and allow it to have child devices. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: Add a uclass for a Platform Controller HubSimon Glass2015-04-183-9/+29
| | | | | | | | | Add a simple uclass for this chip which is often found in x86 systems where the CPU is a separate device. The device can have children, so make it scan the device tree for these. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: spi: Convert ICH SPI driver to driver modelSimon Glass2015-04-185-20/+25
| | | | | | | | | | | | Convert this driver over to use driver model. Since all x86 platforms use it, move x86 to use driver model for SPI and SPI flash. Adjust all dependent code and remove the old x86 spi_init() function. Note that this does not make full use of the new PCI uclass as yet. We still scan the bus looking for the device. It should move to finding its details in the device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: pci: Convert chromebook_link to use driver model for pciSimon Glass2015-04-186-67/+59
| | | | | | | | | | | | | | | | Move chromebook_link over to driver model for PCI. This involves: - adding a uclass for platform controller hub - removing most of the existing PCI driver - adjusting how CPU init works to use driver model instead - rename the lpc compatible string (it will be removed later) This does not really take advantage of driver model fully, but it does work. Furture work will improve the code structure to remove many of the explicit calls to init the board. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: pci: Convert coreboot to use driver model for pciSimon Glass2015-04-182-47/+23
| | | | | | Move coreboot-x86 over to driver model for PCI. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: pci: Add a PCI driver for driver modelSimon Glass2015-04-183-0/+50
| | | | | | | Add a simple x86 PCI driver which uses standard functions provided by the architecture. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Split up arch_cpu_init()Simon Glass2015-04-161-0/+8
| | | | | | | | At present we do more in this function than we should. Split out the post-driver-model part into a separate function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add a x86_ prefix to the x86-specific PCI functionsSimon Glass2015-04-1620-187/+191
| | | | | | | | | | | | These functions currently use a generic name, but they are for x86 only. This may introduce confusion and prevents U-Boot from using these names more widely. In fact it should be possible to remove these at some point and use generic functions, but for now, rename them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add support for panther (Asus Chromebox)Simon Glass2015-04-163-0/+81
| | | | | | | | | | | | | | | | | | | | Support running U-Boot as a coreboot payload. Tested peripherals include: - Video (HDMI and DisplayPort) - SATA disk - Gigabit Ethernet - SPI flash USB3 does not work. This may be a problem with the USB3 PCI driver or something in the USB3 stack and has not been investigated So far this is disabled. The SD card slot also does not work. For video, coreboot will need to run the OPROM to set this up. With this board, bare support (running without coreboot) is not available as yet. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Support machines with >4GB of RAMSimon Glass2015-04-161-2/+4
| | | | | | | | | | | | | Some systems have more than 4GB of RAM. U-Boot can only place things below 4GB so any memory above that should not be used. Ignore any such memory so that the memory size will not exceed the maximum. This prevents gd->ram_size exceeding 4GB which causes problems for PCI devices which use DMA. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* malloc_f: enable SYS_MALLOC_F by default if DM is onMasahiro Yamada2015-03-281-3/+0
| | | | | | | | | | | | | | This option has a bool type, not hex. Fix it and enable it if CONFIG_DM is on because Driver Model always requires malloc memory. Devices are scanned twice, before/after relocation. CONFIG_SYS_MALLOC_F should be enabled to use malloc memory before relocation. As it is board-independent, handle it globally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Robert Baldyga <r.baldyga@samsung.com>
* generic-board: select SYS_GENERIC_BOARD for some architecturesMasahiro Yamada2015-03-281-1/+0
| | | | | | | | | | | | We have done with the generic board conversion for all the boards of ARC, Blackfin, M68000, MicroBlaze, MIPS, NIOS2, Sandbox, X86. Let's select SYS_GENERIC_BOARD for those architectures, so we can tell which architecture has finished the conversion at a glance. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
* generic-board: move __HAVE_ARCH_GENERIC_BOARD to KconfigMasahiro Yamada2015-03-281-3/+0
| | | | | | | | Move the option to Kconfig renaming it to CONFIG_HAVE_GENERIC_BOARD. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
* x86: quark: Enable on-chip ethernet controllersBin Meng2015-03-241-0/+19
| | | | | | | | | | Intel Quark SoC integrates two 10/100 ethernet controllers which can be connected to an external RMII PHY. The MAC IP is from Designware. Enable this support with the existing U-Boot Designware MAC driver so that the ethernet port on Intel Galileo board can be used. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* arch/x86/cpu/quark/mrc.c: Switch to U_BOOT_DATE / U_BOOT_TIMETom Rini2015-03-241-1/+2
| | | | | | | | | | | Using __DATE__ and __TIME__ results in an error due to -Werror=date-time with gcc-4.9 (__DATE__ / __TIME__ might prevent reproducible builds) so switch these over to U_BOOT_DATE / U_BOOT_TIME Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: quark: MRC codes clean upBin Meng2015-03-247-1049/+955
| | | | | | | | | | | | This patch cleans up the quark MRC codes coding style by: - Remove BIT0/1../31 defines from mrc_util.h - Create names for the documented BITs and use them - For undocumented single BITs, use (1 << n) directly - For undocumented ORed BITs, use the hex number directly - Remove redundancy parenthesis all over the codes - Replace to use lower case hex numbers Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* remove unnecessary version.h includesRob Herring2015-03-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various files are needlessly rebuilt every time due to the version and build time changing. As version.h is not actually needed, remove the include. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Stefano Babic <sbabic@denx.de> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Tom Warren <twarren@nvidia.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Macpaul Lin <macpaul@andestech.com> Cc: Wolfgang Denk <wd@denx.de> Cc: York Sun <yorksun@freescale.com> Cc: Stefan Roese <sr@denx.de> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Philippe Reynes <tremyfr@yahoo.fr> Cc: Eric Jarrige <eric.jarrige@armadeus.org> Cc: "David Müller" <d.mueller@elsoft.ch> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Robert Baldyga <r.baldyga@samsung.com> Cc: Torsten Koschorrek <koschorrek@synertronixx.de> Cc: Anatolij Gustschin <agust@denx.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Łukasz Majewski <l.majewski@samsung.com>
* dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to KconfigSimon Glass2015-02-121-0/+6
| | | | | Move this option to Kconfig and update all boards. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: Move driver model CONFIGs to KconfigSimon Glass2015-02-121-0/+9
| | | | | | | Remove driver model CONFIGs from the board config headers and use Kconfig instead. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2015-02-1064-149/+10646
|\
| * x86: Use tab instead of space to indent in PCIE_ECAM_BASEBin Meng2015-02-061-1/+1
| | | | | | | | | | | | | | | | Space is used before 'default' in PCIE_ECAM_BASE in arch/x86/Kconfig so it looks misaligned. Replace the space with tab to indent. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: Add SD/MMC support to quark/galileoBin Meng2015-02-061-0/+11
| | | | | | | | | | | | | | | | Intel Galileo board has a microSD slot which is routed from Quark SoC SDIO controller. Enable SD/MMC support so that we can use an SD card. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: Add SPI support to quark/galileoBin Meng2015-02-062-0/+30
| | | | | | | | | | | | | | | | | | | | The Quark SoC contains a legacy SPI controller in the legacy bridge which is ICH7 compatible. Like Tunnel Creek and BayTrail, the BIOS control register offset in the ICH SPI driver is wrong for the Quark SoC too, unprotect_spi_flash() is added to enable the flash write. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: galileo: Add GPIO supportBin Meng2015-02-061-0/+14
| | | | | | | | | | | | | | | | | | | | Quark SoC has a legacy GPIO block in the legacy bridge (D0:F31), which is just the same one found in other x86 chipset. Since we programmed the GPIO register block base address, we should be able to enable the GPIO support on Intel Galileo board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: quark: Initialize non-standard BARsBin Meng2015-02-062-0/+78
| | | | | | | | | | | | | | | | | | Quark SoC has some non-standard BARs (excluding PCI standard BARs) which need be initialized with suggested values. This includes GPIO, WDT, RCBA, PCIe ECAM and some ACPI register block base addresses. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: quark: Call MRC in dram_init()Bin Meng2015-02-062-2/+122
| | | | | | | | | | | | | | | | Now that we have added Quark MRC codes, call MRC in dram_init() so that DRAM can be initialized on a Quark based board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: quark: Enable the Memory Reference Code buildBin Meng2015-02-061-0/+1
| | | | | | | | | | | | | | Turn on the Memory Reference code build in the quark Makefile. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: quark: Add System Memory Controller supportBin Meng2015-02-062-0/+3210
| | | | | | | | | | | | | | The codes are actually doing the memory initialization stuff. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: quark: Add utility codes needed for MRCBin Meng2015-02-064-0/+2068
| | | | | | | | | | | | | | Add various utility codes needed for Quark MRC. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: quark: Add Memory Reference Code (MRC) main routinesBin Meng2015-02-062-0/+391
| | | | | | | | | | | | | | Add the main routines for Quark Memory Reference Code (MRC). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: quark: Bypass TSC calibrationBin Meng2015-02-061-0/+5
| | | | | | | | | | | | | | | | | | For some unknown reason, the TSC calibration via PIT does not work on Quark. Enable bypassing TSC calibration and override TSC_FREQ_IN_MHZ to 400 per Quark datasheet in the Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: Allow overriding TSC_FREQ_IN_MHZBin Meng2015-02-061-20/+20
| | | | | | | | | | | | | | | | We should allow the value of TSC_FREQ_IN_MHZ to be overridden by the one in arch/cpu/<xxx>/Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: Enable the Intel quark/galileo buildBin Meng2015-02-062-0/+18
| | | | | | | | | | | | | | | | | | Make the Intel quark/galileo support avaiable in Kconfig and Makefile. With this patch, we can generate u-boot.rom for Intel galileo board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: Add basic Intel Galileo board supportBin Meng2015-02-062-0/+44
| | | | | | | | | | | | | | | | | | New board/intel/galileo board directory with minimum codes, plus board dts, defconfig and configuration files. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: Add basic Intel Quark processor supportBin Meng2015-02-066-0/+295
| | | | | | | | | | | | | | | | Add minimum codes to support Intel Quark SoC. DRAM initialization is not ready yet so a hardcoded gd->ram_size is assigned. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: quark: Add Cache-As-RAM initializationBin Meng2015-02-061-0/+105
| | | | | | | | | | | | | | | | | | Quark SoC contains an embedded 512KiB SRAM (eSRAM) that is initialized by hardware. eSRAM is the ideal place to be used for Cache-As-RAM (CAR) before system memory is available. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: Define macros for pci configuration space accessBin Meng2015-02-062-7/+13
| | | | | | | | | | | | | | | | | | Move PCI_REG_ADDR and PCI_REG_DATA from arch/x86/lib/pci_type1.c to arch/x86/include/asm/pci.h, also define PCI_CFG_EN so that these macros can be used for pci configuration space access. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: quark: Add routines to access message bus registersBin Meng2015-02-062-0/+183
| | | | | | | | | | | | | | | | | | | | | | In the Quark SoC, some chipset commands are accomplished by utilizing the internal message network within the host bridge (D0:F0). Accesses to this network are accomplished by populating the message control register (MCR), Message Control Register eXtension (MCRX) and the message data register (MDR). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: Add header files for Intel Quark SoC definesBin Meng2015-02-062-0/+68
| | | | | | | | | | | | | | | | device.h for integrated pci devices' bdf on Quark SoC and quark.h for various memory-mapped and i/o-mapped base addresses within SoC. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: Add support for Intel Minnowboard MaxSimon Glass2015-02-0615-2/+3831
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a relatively low-cost x86 board in a small form factor. The main peripherals are uSD, USB, HDMI, Ethernet and SATA. It uses an Atom 3800 series CPU. So far only the dual core 2GB variant is supported. This uses the existing FSP support. Binary blobs are required to make this board work. The microcode update is included as a patch (all 3000 lines of it). Change-Id: I0088c47fe87cf08ae635b343d32c332269062156 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: Allow a UART to be set up before the FSP is readySimon Glass2015-02-062-0/+7
| | | | | | | | | | | | | | | | | | Since the FSP is a black box it helps to have some sort of debugging available to check its inputs. If the debug UART is in use, set it up after CAR is available. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: Allow FSP Kconfig settings for all x86Simon Glass2015-02-062-38/+38
| | | | | | | | | | | | | | | | While queensbay is the first chip with these settings, others will want to use them too. Make them common. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: Remove unnecessary casts and fix comment typosSimon Glass2015-02-061-5/+5
| | | | | | | | | | | | | | Tidy up the FSP support code a little. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: mmc: Move common FSP functions into a common fileSimon Glass2015-02-065-72/+59
| | | | | | | | | | | | | | | | | | | | | | | | Since these board functions seem to be the same for all boards which use FSP, move them into a common file. We can adjust this later if future FSPs need more flexibility. This creates a generic PCI MMC device. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: Make CAR and DRAM FSP code commonSimon Glass2015-02-054-1/+3
| | | | | | | | | | | | | | | | | | For now this code seems to be the same for all FSP platforms. Make it common until we see what differences are required. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: Adjust the FSP types slightlySimon Glass2015-02-054-7/+9
| | | | | | | | | | | | | | | | | | | | To avoid casts, find_fsp_header() should return a pointer. Add asmlinkage to two API functions which use that convention. UPD_TERMINATOR is common so move it into a common file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: Move common FSP code into a common locationSimon Glass2015-02-0518-8/+16
| | | | | | | | | | | | Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: video: Allow video ROM execution to fall back to the other methodSimon Glass2015-02-051-1/+2
| | | | | | | | | | | | | | | | If the BIOS emulator is not available, allow use of native execution if available, and vice versa. This can be controlled by the caller. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: Rename MMCONF_BASE_ADDRESS and make it common across x86Simon Glass2015-02-053-2/+16
| | | | | | | | | | | | | | | | | | This setting will be used by more than just ivybridge so make it common. Also rename it to PCIE_ECAM_BASE which is a more descriptive name. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
OpenPOWER on IntegriCloud