summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-tegra
Commit message (Collapse)AuthorAgeFilesLines
* dm: tegra: Convert keyboard driver to driver modelSimon Glass2015-11-191-0/+1
| | | | | | | | Adjust the tegra keyboard driver to support driver model, using the new uclass. Make this the default for all Tegra boards so that those that use a keyboard will build correctly with this driver. Signed-off-by: Simon Glass <sjg@chromium.org>
* ARM: tegra: note that p2371-2180 is Jetson TX1Stephen Warren2015-11-121-5/+5
| | | | | | | | | | p2371-2180 is the engineering board name for the Jetson TX1 developer kit. Update Kconfig description and help text to make this obvious to everyone. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: rename GPU functionsAlexandre Courbot2015-11-122-4/+4
| | | | | | | | | Rename GPU functions to less generic names to avoid potential name collisions. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: simplify GPU setupAlexandre Courbot2015-11-121-0/+20
| | | | | | | | | | Enable the GPU node in the system-wide ft_system_setup() hook instead of the board-specific ft_board_hook(). This allows us to enable GPU per SoC generation instead of per-board as we did initially. Reported-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: remove vpr_configured() functionAlexandre Courbot2015-11-121-6/+1
| | | | | | | | There is no justification for this function, especially in exported form. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: error check Tegra210 XUSB padctl waitsStephen Warren2015-11-121-5/+20
| | | | | | | | | Add code to detect timeouts when waiting for HW events such as PLL lock done. Any errors are logged and trigger an error return code. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: add lane tables to Tegra210 XUSB padctlStephen Warren2015-11-122-6/+76
| | | | | | | | | Add the tables defining which pads and mux options exist in the Tegra210 XUSB padctl hardware. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: switch Tegra210 to common XUSB padctlStephen Warren2015-11-122-158/+16
| | | | | | | | | | | | | This change simply deletes code from the Tegra210 XUSB padctl driver that is already present in the common XUSB padctl code. Since all the arrays in tegra210_socdata are empty, this update may leave the Tegra210 XUSB padctl driver non-functional at run-time. However, (a) this driver is not used yet so no regression can be observed and (b) the next commit will immediately fix this up. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: parameterize common XUSB codeStephen Warren2015-11-122-82/+34
| | | | | | | | | | | | | | There are some differences between the Tegra124 and Tegra210 XUSB padctl code. So far, the common XUSB padctl code only supports Tegra124. Add some parameters etc. so that it can work for both chips. This also allows moving Tegra124's process_nodes() into the common file; something that would have requires edits during the move if done in the previous commit. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: create common XUSB padctl driver fileStephen Warren2015-11-124-341/+414
| | | | | | | | | | | | | A fair amount of the XUSB padctl driver will be common between Tegra124 and Tegra210. To avoid cut/paste between the two chips, create a new file that will contain the common code, and convert the Tegra124 code to use it. This change doesn't move every last piece of code that can/will be shared, but rather concentrates on moving code that can be moved with zero changes, so there are no other diffs mixed in. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: clean up XUSB padctl error() callsStephen Warren2015-11-121-19/+14
| | | | | | | | | | This file defines pr_fmt(), so the individual error() calls don't need to include the prefix in their format strings. Doing so results in duplicate text in any error messages. Remove the duplication. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: rename dummy XUSB padctl implementationStephen Warren2015-11-122-1/+1
| | | | | | | | | | A future patch will soon move some of the XUSB padctl code into a common file in arch/arm/mach-tegra. Rename the existing dummy XUSB padctl file to avoid conflicting with that, or being confusing. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra210: implement PLLE init procedure from TRMStephen Warren2015-11-121-47/+132
| | | | | | | | | | | | Implement the procedure that the TRM mandates to initialize PLLREFE and PLLE. This makes the PLL actually lock. Note that this section of the TRM is being cleaned up to remove some confusion. The set of register accesses in this patch should be final, although the step numbers/descriptions might still change. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2015-11-102-0/+132
|\
| * ARM: tegra: add custom MMU setup on ARMv8Stephen Warren2015-11-102-0/+132
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This sets up a fine-grained page table, which is a requirement for noncached_init() to operate correctly. MMU setup code currently exists in a number of places: - A version in the core ARMv8 support code that sets up page tables that use very large block sizes that CONFIG_SYS_NONCACHED_MEMORY doesn't support. - Enhanced versions for fsl-lsch3 and zynmq that set up finer grained page tables. Ideally, rather than duplicating the MMU setup code yet again this patch would instead consolidate all the different routines into the core ARMv8 code so that it supported all use-cases. However, this will require significant effort since there appear to be a number of discrepancies[1] between different versions of the code, and between the defines/values by some copies of the MMU setup code use and the architectural MMU documentation. Some reverse engineering will be required to determine the intent of the current code. [1] For example, in the core ARMv8 MMU setup code, three defines named TCR_EL[123]_IPS_BITS exist, but only one of them sets the IPS field and the others set a different field (T1SZ) in the page tables. As far as I can tell so far, there should be no need to set different values per exception level nor to modify the T1SZ field at all, since TTBR1 shouldn't be enabled anyway. Another example is inconsistent values for *_VA_BITS between the current core ARMv8 MMU setup code and the various SoC- specific MMU setup code. Another example is that asm/armv8/mmu.h's value for SECTION_SHIFT doesn't match asm/system.h's MMU_SECTION_SHIFT; research is needed to determine which code relies on which of those values and why, and whether fixing the incorrect value will cause any regression. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | Various Makefiles: Add SPDX-License-Identifier tagsTom Rini2015-11-102-22/+2
|/ | | | | | | | | | | After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: tegra114: Clear IDDQ when enabling PLLCThierry Reding2015-09-161-0/+5
| | | | | | | | | | | | Enabling a PLL while IDDQ is high. The Linux kernel checks for this condition and warns about it verbosely, so while this seems to work fine, fix it up according to the programming guidelines provided in the Tegra K1 TRM (v02p), Section 5.3.8.1 ("PLLC and PLLC4 Startup Sequence"). The Tegra114 TRM doesn't contain this information, but the programming of PLLC is the same on Tegra114 and Tegra124. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra124: Clear IDDQ when enabling PLLCThierry Reding2015-09-161-0/+5
| | | | | | | | | | | | Enabling a PLL while IDDQ is high. The Linux kernel checks for this condition and warns about it verbosely, so while this seems to work fine, fix it up according to the programming guidelines provided in the Tegra K1 TRM (v02p), Section 5.3.8.1 ("PLLC and PLLC4 Startup Sequence"). Reported-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: clk_m is the architected timer source clockThierry Reding2015-09-163-10/+8
| | | | | | | | | | | While clk_m and the oscillator run at the same frequencies on Tegra114 and Tegra124, clk_m is the proper source for the architected timer. On more recent Tegra generations, Tegra210 and later, both the oscillator and clk_m can run at different frequencies. clk_m will be divided down from the oscillator. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Implement clk_mThierry Reding2015-09-162-0/+21
| | | | | | | | | | On currently supported SoCs, clk_m always runs at the same frequency as the oscillator input. However newer SoC generations such as Tegra210 no longer have that restriction. Prepare for that by separating clk_m from the oscillator clock and allow SoC code to override the clk_m rate. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: fix PLLP frequency calc on T210Stephen Warren2015-09-161-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | AFAIK, for all PLLs on all Tegra SoCs, the primary PLL output frequency is (input * m) / (n * p). However, PLLP's primary output (pllP_out0) on T210 is the VCO output, and divp is not applied. pllP_out2 does have divp applied. All other pllP_outN are divided down from pllP_out0. We only support pllP_out0 in U-Boot at the time of writing. Fix clock_get_rate() to handle this special case. This corrects the returned rate for PLLP to be 408MHz rather than 204MHz. In turn, this causes high enough dividers to be calculated for the various peripheral clocks that feed off of PLLP. Without this, some peripherals failed to operate correctly. For instance, one of my SD cards worked perfectly but an older (presumably slower) card could not be read. Note that prior to commit 722e000ccd72 "Tegra: PLL: use per-SoC pllinfo table instead of PLL_DIVM/N/P, etc.", the calculated PLL frequency was 816MHz since the wrong values were being extracted from the PLLP divider register. This caused overly large peripheral dividers to be calculated, which while wrong, didn't cause any correctness issues; things simply ran slower than they could. Reported-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Add p2371-2180 boardStephen Warren2015-09-161-0/+9
| | | | | | | | | | P2371-2180 is a P2180 CPU board married to a P2597 I/O board. The combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA, PCIe, and two GPIO expansion headers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* of: clean up OF_CONTROL ifdef conditionalsMasahiro Yamada2015-08-185-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We have flipped CONFIG_SPL_DISABLE_OF_CONTROL. We have cleansing devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear away the ugly logic in include/fdtdec.h: #ifdef CONFIG_OF_CONTROL # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL) # define OF_CONTROL 0 # else # define OF_CONTROL 1 # endif #else # define OF_CONTROL 0 #endif Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute. It refers to CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for SPL. Also, we no longer have to cancel CONFIG_OF_CONTROL in include/config_uncmd_spl.h and scripts/Makefile.spl. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROLMasahiro Yamada2015-08-181-1/+0
| | | | | | | | | | | | | | | | | | | As we discussed a couple of times, negative CONFIG options make our life difficult; CONFIG_SYS_NO_FLASH, CONFIG_SYS_DCACHE_OFF, ... and here is another one. Now, there are three boards enabling OF_CONTROL on SPL: - socfpga_arria5_defconfig - socfpga_cyclone5_defconfig - socfpga_socrates_defconfig This commit adds CONFIG_SPL_OF_CONTROL for them and deletes CONFIG_SPL_DISABLE_OF_CONTROL from the other boards to invert the logic. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* ARM: tegra: represent RAM in 1 or 2 banksStephen Warren2015-08-131-14/+106
| | | | | | | | | | | | | | | | | | | | | Represent all available RAM in either one or two banks. The first bank describes any RAM below 4GB. The second bank describes any RAM above 4GB. This split is driven by the following requirements: - The NVIDIA L4T kernel requires separate entries in the DT /memory/reg property for memory below and above the 4GB boundary. The layout of that DT property is directly driven by the entries in the U-Boot bank array. - On systems with RAM beyond a physical address of 4GB, the potential existence of a carve-out at the end of RAM below 4GB can only be represented using multiple banks, since usable RAM is not contiguous. While making this change, add a lot more comments re: how and why RAM is represented in banks, and implement a few more "semantic" functions that define (and perhaps later detect at run-time) the size of any carve-out. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: query_sdram_size() cleanupStephen Warren2015-08-131-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The return value of query_sdram_size() is assigned directly to gd->ram_size in dram_init(). Adjust the return type to match the field it's assigned to. This has the beneficial effect that on 64-bit systems, the return value can correctly represent large RAM sizes over 4GB. For similar reasons, change the type of variable size_bytes in the same way. query_sdram_size() would previously clip the detected RAM size to at most just under 4GB in all cases, since on 32-bit systems, larger values could not be represented. Disable this feature on 64-bit systems since the representation restriction does not exist. On 64-bit systems, never call get_ram_size() to validate the detected/ calculated RAM size. On any system with a secure OS/... carve-out, RAM may not have a single contiguous usable area, and this can confuse get_ram_size(). Ideally, we'd make this call conditional upon some other flag that indicates specifically that a carve-out is actually in use. At present, building for a 64-bit system is the best indication we have of this fact. In fact, the call to get_ram_size() is not useful by the time U-Boot runs on any system, since U-Boot (and potentially much other early boot software) always runs from RAM on Tegra, so any mistakes in memory controller register programming will already have manifested themselves and prevented U-Boot from running to this point. In the future, we may simply delete the call to get_ram_size() in all cases. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: Correct logic for reading pll_misc in clock_start_pll()Simon Glass2015-08-133-13/+31
| | | | | | | | | | | | The logic for simple PLLs on T124 was broken by this commit: 722e000c Tegra: PLL: use per-SoC pllinfo table instead of PLL_DIVM/N/P, etc. Correct it by reading from the same pll_misc register that it writes to and adding an entry for the DP PLL in the pllinfo table. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Add p2371-0000 boardStephen Warren2015-08-061-0/+9
| | | | | | | | | | | P2371-0000 is a P2581 or P2530 CPU board married to a P2595 I/O board. The combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA, a GPIO expansion header, and an analog audio jack. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Add e2220-1170 boardStephen Warren2015-08-061-0/+8
| | | | | | | | | E2220-1170 is a Tegra210 bringup board with onboard SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B port, and sockets for various expansion modules. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: enable GPU DT node when appropriateAlexandre Courbot2015-08-061-0/+19
| | | | | | | | | | | | | | | | T124/210 requires some specific configuration (VPR setup) to be performed by the bootloader before the GPU can be used. For this reason, the GPU node in the device tree is disabled by default. This patch enables the node if U-boot has performed VPR configuration. Boards enabled by this patch are T124's Jetson TK1 and Venice2 and T210's P2571. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: move VPR configuration to a later stageAlexandre Courbot2015-08-064-9/+19
| | | | | | | | | | | | | | | | U-boot is responsible for enabling the GPU DT node after all necessary configuration (VPR setup for T124) is performed. In order to be able to check whether this configuration has been performed right before booting the kernel, make it happen during board_init(). Also move VPR configuration into the more generic gpu.c file, which will also host other GPU-related functions, and let boards specify individually whether they need VPR setup or not. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: restrict usable RAM size furtherStephen Warren2015-08-061-2/+11
| | | | | | | | | | | | | | Additionally, ARM64 devices typically run a secure monitor in EL3 and U-Boot in EL2, and set up some secure RAM carve-outs to contain the EL3 code and data. These carve-outs are located at the top of 32-bit address space. Restrict U-Boot's RAM usage to well below the location of those carve-outs. Ideally, we would the secure monitor would inform U-Boot of exactly which RAM it could use at run-time. However, I'm not sure how to do that at present (and even if such a mechanism does exist, it would likely not be generic across all forms of secure monitor). Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Tegra: PLL: use per-SoC pllinfo table instead of PLL_DIVM/N/P, etc.Tom Warren2015-08-059-145/+260
| | | | | | | | | | | | | Added PLL variables (dividers mask/shift, lock enable/detect, etc.) to new pllinfo struct for each Soc/PLL. PLLA/C/D/E/M/P/U/X. Used pllinfo struct in all clock functions, validated on T210. Should be equivalent to prior code on T124/114/30/20. Thanks to Marcel Ziswiler for corrections to the T20/T30 values. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Tegra: clocks: Add 38.4MHz OSC support for T210 useTom Warren2015-08-053-6/+27
| | | | | | | | | | | | | | | Added 38.4MHz/48MHz entries to pll_x_table for CPU PLL. Needs to be measured - should be close to 700MHz (1.4G/2). Note that some freqs aren't in the PLLU table in T210 TRM (13, 26MHz), so I used the 12MHz table entry for them. They shouldn't be selected since they're not viable T210 OSC freqs. Since there are now 2 new OSC defines, all tables (pll_x_table, PLLU) had to increase by two entries, but since 38.4/48MHz are not viable osc freqs on T20/30/114, etc, they're just set to 0. Signed-off-by: Tom Warren <twarren@nvidia.com>
* T210: P2571: Turn CPU fan onTom Warren2015-08-051-0/+3
| | | | | | | | CPU board (E2530) has a fan - turn it on via GPIO to keep the SoC cool. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* T210: Add support for 64-bit T210-based P2571 boardTom Warren2015-07-281-0/+7
| | | | | | | | | | | Based on Venice2, incorporates Stephen Warren's latest P2571 pinmux table. With Thierry Reding's 64-bit build fixes, this will build and and boot in 64-bit on my P2571 (when used with a 32-bit AVP loader). Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: Tegra210: Add support to common Tegra source/config filesTom Warren2015-07-289-25/+125
| | | | | | | | | | | Derived from Tegra124, modified as appropriate during T210 board bringup. Cleaned up debug statements to conserve string space, too. This also adds misc 64-bit changes from Thierry Reding/Stephen Warren. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: Tegra210: Add SoC code/include files for T210Tom Warren2015-07-285-0/+1648
| | | | | | | | | | | All based off of Tegra124. As a Tegra210 board is brought up, these may change a bit to match the HW more closely, but probably 90% of this is identical to T124. Note that since T210 is a 64-bit build, it has no SPL component, and hence no cpu.c for Tegra210. Signed-off-by: Tom Warren <twarren@nvidia.com>
* Tegra: Rework KConfig options to allow 64-bit builds (T210)Tom Warren2015-07-281-0/+18
| | | | | | | | | | Moved Tegra config options to mach-tegra/Kconfig so that both 32-bit and 64-bit builds can co-exist for Tegra SoCs. T210 will be 64-bit only (no SPL) and will require a 32-bit AVP/BPMP loader. Signed-off-by: Tom Warren <twarren@nvidia.com>
* Tegra210: Fix 64-bit build warning about save_boot_params_ret()Tom Warren2015-07-281-0/+2
| | | | | | | | Simon's 'tegra124: Implement spl_was_boot_source()' needs a prototype for save_boot_params_ret() to build cleanly for 64-bit Tegra210. Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Initialize timer earlierThierry Reding2015-07-282-6/+6
| | | | | | | | | | | | | A subsequent patch will enable the use of the architected timer on ARMv8. Doing so implies that udelay() will be backed by this timer implementation, and hence the architected timer must be ready when udelay() is first called. The first time udelay() is used is while resetting the debug UART, which happens very early. Make sure that arch_timer_init() is called before that. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Use standard cache enable for 64-bitThierry Reding2015-07-281-1/+1
| | | | | | | | | On 64-bit SoCs the I-cache isn't enabled in early code, so the default cache enable functions for 64-bit ARM can be used. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra: Restrict usable RAM to 32-bit on 64-bit SoCsThierry Reding2015-07-281-0/+16
| | | | | | | | | | | | | | | Most peripherals on Tegra can do DMA only to the lower 32-bit address space, even on 64-bit SoCs. This limitation is typically overcome by the use of an IOMMU. Since the IOMMU is not entirely trivial to set up and serves no other purpose (I/O protection, ...) in U-Boot, restrict 64-bit Tegra SoCs to the lower 32-bit address space for RAM. This ensures that the physical addresses of buffers that are programmed into the various DMA engines are valid and don't alias to lower addresses. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra: Build warning fixes for 64-bitThierry Reding2015-07-272-3/+3
| | | | | | | | Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> [swarren, stripped out changes not strictly related to warnings] Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* tegra124: Implement spl_was_boot_source()Simon Glass2015-07-271-0/+16
| | | | | | | Add an implementation of this function for Tegra. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Move default y configs out of arch/board KconfigJoe Hershberger2015-06-251-12/+0
| | | | | | | | | | | | | | | | | | | Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: Tom Rini <trini@konsulko.com>
* dm: usb: tegra: Drop legacy USB codeSimon Glass2015-06-101-3/+0
| | | | | | Drop the code that doesn't use driver model for USB. Signed-off-by: Simon Glass <sjg@chromium.org>
* dts: Disable device tree for SPL on all boardsSimon Glass2015-06-101-0/+3
| | | | | | | We plan to enable device tree in SPL by default. Before doing this, explicitly disable it for all boards. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: tegra: usb: Move USB to driver modelSimon Glass2015-06-102-0/+5
| | | | | | | | | | Somehow this change was dropped in the various merges. I noticed when I came to turn off the non-driver-model support for Tegra. We need to make this change (and deal with any problems) before going further. Change-Id: Ib9389a0d41008014eb0df0df98c27be65bc79ce6 Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
* tegra: Replace 'Norrin' with 'Nyan-big' and fix typoSimon Glass2015-06-091-1/+1
| | | | | | | | With the rename the MAINTAINER file was not updated. Fix it and the 'Chrombook' typo in Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
OpenPOWER on IntegriCloud