summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-socfpga
Commit message (Collapse)AuthorAgeFilesLines
* arm: socfpga: Nuke useless includeMarek Vasut2016-04-102-13/+0
| | | | | | | | | | The dwmmc.h include was forgotten during the migration of dwmmc probing to DM. Since the shiny DM is in place now, remove this relic of the past. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
* arm: socfpga: Handle phy-mode OF property for GMACsMarek Vasut2016-04-101-3/+36
| | | | | | | | | | | | | | | Thus far, the socfpga init code had hard-coded the configuration of the ethernet PHY interface to RGMII in the ethernet registers in sysmgr space, so PHYs connected in another modes did not work. This patch fixes support for configurations where the ethernet PHYs are connected over MII/GMII/RMII interfaces by parsing the phy-mode OF property of the GMACs and configuring the ethernet registers in sysmgr space accordingly. Signed-off-by: Marek Vasut <marex@denx.de> Reported-by: Denis Bakhvalov <denis.bakhvalov@nokia.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: Fix ethernet reset handlingMarek Vasut2016-02-241-2/+7
| | | | | | | | | | | | | | | | | | The following patch caused cpu_eth_init() to not be called anymore for DM-capable boards: commit c32a6fd07b1839e4a45729587ebc8e1c55601a4d Date: Sun Jan 17 14:51:56 2016 -0700 net: Don't call board/cpu_eth_init() with driver model This breaks ethernet on SoCFPGA, since we use that function to un-reset the ethernet blocks. Invoke the ethernet reset function from arch_misc_init() instead to fix the breakage. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> Cc: Denis Bakhvalov <denis.bakhvalov@nokia.com>
* arm: socfpga: Remove bashisms from qts filterMarek Vasut2016-02-241-7/+7
| | | | | | | | | | Weed out bashisms from the script. The echo -e does not work in dash, which is the default /bin/sh in debian . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> Cc: Dalon Westergreen <dwesterg@gmail.com>
* socfpga: Modify qts-filter args to allow input for bsp generated files and ↵Dalon Westergreen2016-01-161-31/+45
| | | | | | | | | | | | quartus project directories The hps_isw_handoff and bsp/generated folders are typically not in the same path.This patch adds support for specifying the different input directories for the bsp and quartus projects. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Chin Liang See <clsee@altera.com>
* arm: socfpga: Unreset NAND in U-BootMarek Vasut2015-12-221-0/+4
| | | | | | | | Make sure the NAND reset is not asserted in full U-Boot. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
* arm: socfpga: Unreset NAND in SPLMarek Vasut2015-12-221-0/+1
| | | | | | | | If the system boots from NAND, make sure to de-assert the NAND IP reset, otherwise the system will get stuck. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: Define NAND reset bitMarek Vasut2015-12-221-1/+2
| | | | | | | Define the NAND reset bit and fix the ordering of the macros. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: Actually enable L2 cacheMarek Vasut2015-12-221-2/+11
| | | | | | | | | The L2 cache was never enabled in the v7_outer_cache_enable(), fix this and enable the L2 cache. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
* arm: socfpga: fix up a questionable macro for SDMMCDinh Nguyen2015-12-201-3/+7
| | | | | | | | Move the macro into the socfpga_dwmci_clksel(). Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Marek Vasut <marex@denx.de> [fix parenthesis in the sdmmc_mask]
* arm: socfpga: remove building scan managerDinh Nguyen2015-12-201-2/+3
| | | | | | | | The scan manager is not needed for the Arria10. Edit the makefile to build the scan manager for arria5 and cyclone5 only. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Marek Vasut <marex@denx.de>
* arm: socfpga: introduce TARGET_SOCFPGA_GEN5 config propertyDinh Nguyen2015-12-201-0/+5
| | | | | | | | | In order to re-use as much Cyclone5 and Arria5 code as possible to support the Arria10 platform, we need to wrap some of the code with #ifdef's. By adding CONFIG_TARGET_SOCFPGA_GEN5, we can shorten the check by not having to check for both AV || AV. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: Introduce common board codeMarek Vasut2015-12-202-1/+65
| | | | | | | | | | The SoCFPGA has reached a point where every single board code become the same, since each and every single board is probed equally from OF. Move the common board code into arch/arm/mach-socfpga/ . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: Remove cpu_mmc_init()Marek Vasut2015-12-071-11/+0
| | | | | | | | | | | | This function triggers the registration of the dwmmc driver on SoCFPGA, but this is not needed in case the driver is correctly probed from DT. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
* arm: socfpga: Add SoCFPGA SR1500 boardStefan Roese2015-12-071-0/+6
| | | | | | | | | | | | | | | The SR1500 board is a CycloneV based board, similar to the EBV SoCrates, equipped with the following devices: - SPI NOR - eMMC - Ethernet Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de>
* arm: socfpga: Repair SoCrates boardMarek Vasut2015-11-301-0/+7
| | | | | | | | | | | | | | This board was constantly parasiting on the CV SoCDK, so split it into it's own separate directory. Moreover, the board config was missing important bits, like simple-bus support in SPL, the DRAM configuration was incorrect and the DTS was also missing the pre reloc bits. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Jan Viktorin <viktorin@rehivetech.com>
* ARM: socfpga: rename the cyclone5 and arria5 base address fileDinh Nguyen2015-11-301-0/+0
| | | | | | | | | When adding support for the Arria10 platform, we're going to name the file base_addr_a10.h, so to be systematic about it, rename the socfpga_base_addr.h to be base_addr_ac5.h for the Arria5 and Cyclone5 platform. Suggested-by: Marek Vasut <marex@denx.de> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ARM: socfpga: arria10: add base address map for Arria10Dinh Nguyen2015-11-301-0/+45
| | | | | | | Add the base address map for Arria10. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Reviewed-by: Marek Vasut <marex@denx.de>
* arm: socfpga: reset: FIX address of tstscratch registerPhilipp Rosenberger2015-11-301-0/+1
| | | | | | | | | | | The Cyclone V Hard Processor System Technical Reference Manual in the chapter about the Reset Manager Module Address Map stats that the offset of the tstscratch register ist 0x54 not 0x24. Cyclone V Hard Processor System Technical Reference Manual cv_5v4 2015.11.02 page 3-17 Reset Manager Module Address Map Signed-off-by: Philipp Rosenberger <ilu@linutronix.de>
* arm: socfpga: reset: correct dma, qspi, and sdmmc reset bit definesDinh Nguyen2015-11-031-3/+3
| | | | | | | The DMA, QSPI, and SD/MMC reset bits are located in the permodrst register, not the mpumodrst. So the bank for these reset bits should be 1, not 0. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: enable data/inst prefetch and shared override in the L2Dinh Nguyen2015-10-171-0/+12
| | | | | | | | | | | | | | | | | | | | Update the L2 AUX CTRL settings for the SoCFPGA. Enabling D and I prefetch bits helps improve SDRAM performance on the platform. Also, we need to enable bit 22 of the L2. By not having bit 22 set in the PL310 Auxiliary Control register (shared attribute override enable) has the side effect of transforming Normal Shared Non-cacheable reads into Cacheable no-allocate reads. Coherent DMA buffers in Linux always have a Cacheable alias via the kernel linear mapping and the processor can speculatively load cache lines into the PL310 controller. With bit 22 cleared, Non-cacheable reads would unexpectedly hit such cache lines leading to buffer corruption. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: rename socfpga_cyclone5 and socfpga_arria5 config filesDinh Nguyen2015-09-231-2/+2
| | | | | | | | | Rename the socfpga_cyclone5.h to socfpga_cyclone5_socdk.h, and socfpga_arria.h to socfpga_arria5_socdk.h. This matches the other SoCFPGA board config files. Suggested-by: Marek Vasut <marex@denx.de> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: Add support for the Terasic DE-0 Atlas boardDinh Nguyen2015-09-041-0/+7
| | | | | | | Add support for the Terasic DE0-Nano/Atlas-SoC Kit, which is a CycloneV based board. The board can boot from SD/MMC. Ethernet is also supported. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: Add support for DENX MCV SoM and MCVEVK boardMarek Vasut2015-09-041-0/+7
| | | | | | | | Add support for DENX MCV SoM, which is CycloneV based and the associated DENX MCVEVK baseboard. The board can boot from eMMC. Ethernet and USB is supported. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Add support for Terasic SoCkit boardMarek Vasut2015-09-041-0/+7
| | | | | | | | Add support for Terasic SoCkit, which is CycloneV based board. The board can boot either from SD/MMC or QSPI. Ethernet is also supported. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Do not call board_init_r() from board_init_f()Marek Vasut2015-09-041-2/+0
| | | | | | | | | | | Instead of calling board_init_r() directly from board_init_f(), just return from board_init_f(). This will make the code continue executing in crt0.S _main(), from which the board_init_r() is called. This patch aligns the SoCFPGA SPL with the correct SPL design as well as reduces the stack utilisation slightly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: Assure ISWGRP 0 and 1 are initedMarek Vasut2015-09-041-1/+7
| | | | | | | | | | This fix makes sure that the ISWGRP0 and ISWGRP1 registers are correctly inited. In case those registers are not initialized, it is not possible to access the registers synthesised in the FPGA through the bridges. Any such access produces data abort. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
* mmc: dw_mmc: Probe the MMC from OFMarek Vasut2015-09-042-9/+2
| | | | | | | | | | | | | Rework the driver to probe the MMC controller from Device Tree and make it mandatory. There is no longer support for probing from the ancient qts-generated header files. This patch now also removes previous temporary workaround. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com>
* arm: socfpga: Make the pinmux table const u8Marek Vasut2015-08-234-6/+4
| | | | | | | | | | | Now that we're actually converting the QTS-generated header files, we can even adjust their data types. A good candidate for this is the pinmux table, where each entry can have value in the range of 0..3, but each element is declared as unsigned long. By changing the type to u8, we can save over 600 Bytes from the SPL, so do it. This patch also constifies the array. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Switch to filtered QTS filesMarek Vasut2015-08-233-30/+8
| | | | Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Add qts-filter.sh scriptMarek Vasut2015-08-231-0/+205
| | | | | | | | | Add script which loads the QTS-generated sources and headers and converts them into sensible format which can be used with much more easy in mainline U-Boot. The script also filters out macros which makes no sense anymore, so they don't pollute namespace and waste space. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Split Altera socfpga into AV and CV SoCDKMarek Vasut2015-08-231-2/+2
| | | | | | | | | | | | | | | | | | The board/altera/socfpga directory is not a generic SoCFPGA machine anymore, but instead it represents the Altera SoCDK board. To make matters more complicated, it represents both CycloneV and ArriaV variant. On the other hand, nowadays, the content of this board directory is mostly comprised of QTS-generated header files, while all the generic code is in arch/arm/mach-socfpga already. Thus, this patch splits the board/altera/socfpga into a separate board directory for ArriaV SoCDK and CycloneV SoCDK, so that each can be populated with the correct QTS-generated header files for that particular board. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Unbind CPU type from board typeMarek Vasut2015-08-231-8/+18
| | | | | | | | | | | | | | | | | | | The CONFIG_TARGET_SOCFPGA_CYCLONE5 and CONFIG_TARGET_SOCFPGA_ARRIA5 selected both a board and a CPU. This is not correct as these macros are supposed to select only board. All would be good, if QTS-generated header files didn't check for these macros exactly to determine if the platform is Cyclone V or Arria V. Thus, for the sake of compatibility with not well fleshed out header file generator, this patch makes these two macros into a stub config option and introduces new CONFIG_TARGET_SOCFPGA_CYCLONE5_SOCDK and CONFIG_TARGET_SOCFPGA_ARRIA5_SOCDK targets, which select the previous stub config option. The result is that compatibility with QTS is preserved and the new CONFIG_TARGET_* select actual target boards. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Move wrappers into platform directoryMarek Vasut2015-08-235-0/+545
| | | | | | | | | Move the wrappers for QTS-generated files into platform directory out of the board directory. The trick here is to add -I to CFLAGS such that it points to the board directory in source tree and thus the qts/ directory there is still reachable. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Fix delay in clock managerMarek Vasut2015-08-231-7/+5
| | | | | | | | This code claims it needs to wait 7us, yet it uses get_timer() function which operates with millisecond granularity. Use timer_get_us() instead, which operates with microsecond granularity. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Fix delay in freeze controllerMarek Vasut2015-08-231-7/+5
| | | | | | | | | | | | Based on observation, this udelay(20) was apparently too high and caused subsequent failure to calibrate DDR when U-Boot was compiled with certain toolchains. Lowering this delay fixed the problem. Instead of permanently lowering the delay, calculate the correct delay based on the original comment, that is, obtain EOSC1 frequency and use it to calculate the precise delay. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: misc: Add support for printing FPGA typeDinh Nguyen2015-08-082-2/+65
| | | | | | | | | | Add code which uses the new functions for obtaining FPGA ID from the scan manager. This new code prints the FPGA model attached to the SoCFPGA during boot and sets environment variable "fpgatype", which can be used to determine the FPGA model in U-Boot scripts. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: scan: Add code to get FPGA IDDinh Nguyen2015-08-082-0/+56
| | | | | | | Add code to get the FPGA type for Altera's SoCFPGA family of FPGA. The code uses the scan manager to send jtag pulses that will return the FPGA ID. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: scan: Factor out IO chain programmingMarek Vasut2015-08-081-71/+42
| | | | | | | | Factor out the code which sends JTAG instruction followed by data into separate function to tidy the code up a little. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: scan: Clean up horrible macrosMarek Vasut2015-08-082-72/+17
| | | | | | | | | | | Clean up the horrible macros present in the scan_manager.h . Firstly, the function scan_mgr_io_scan_chain_prg() is static, yet all the macros are used only within it, thus there is no point in having them in the header file. Moreover, the macros are just making the code much less readable, so remove them instead. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: scan: Introduce generic JTAG accessorMarek Vasut2015-08-081-41/+63
| | | | | | | | | Introduce generic function for accessing the JTAG scan chains in the SCC manager. Make use of this function throughout the SCC manager to replace the ad-hoc writes to registers and make the code less cryptic. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: scan: Clean up scan_chain_engine_is_idle()Marek Vasut2015-08-082-28/+34
| | | | | | | | | | Rework this function so it's clear that it is only polling for certain bits to be cleared. Add kerneldoc. Fix it's return value to be either 0 on success and -ETIMEDOUT on error and propagate this through the scan manager code. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Wrap misc remaining macrosMarek Vasut2015-08-081-0/+17
| | | | | | | | | | | Introduce structure socfpga_sdram_misc_config to wrap the remaining misc configuration values in board file. Again, introduce a function, socfpga_get_sdram_misc_config(), which returns this the structure. This is almost the final step toward wrapping the nasty QTS generated macros in board files and reducing the pollution of the namespace. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Wrap IO_* macrosMarek Vasut2015-08-081-0/+19
| | | | | | | | | | | Introduce structure socfpga_sdram_io_config to wrap the IO configuration values in board file. Introduce socfpga_get_sdram_io_config() function, which returns this the structure. This is another step toward wrapping the nasty QTS generated macros in board files and reducing the pollution of the namespace. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Wrap RW_MGR_* macrosMarek Vasut2015-08-081-0/+64
| | | | | | | | | | | Introduce structure socfpga_sdram_rw_mgr_config to wrap the RW manager configuration values in board file. Introduce a complementary function, socfpga_get_sdram_rwmgr_config(), which returns this the structure. This is another step toward wrapping the nasty QTS generated macros in board files and reducing the pollution of the namespace. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Wrap ac_rom_init and inst_rom_initMarek Vasut2015-08-081-0/+3
| | | | | | | | | | Introduce two wrapper functions, socfpga_get_seq_ac_init() and socfpga_get_seq_inst_init() to avoid direct inclusion of the sequencer_auto_ac_init.h and sequencer_auto_inst_init.h QTS generated files. This reduces namespace pollution again. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Clean up mach/sdram.hMarek Vasut2015-08-081-3/+1
| | | | | | | | Zap non-existent functions and place function prototypes at the beginning of the header file. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sdram: Introduce socfpga_sdram_get_config()Marek Vasut2015-08-081-0/+42
| | | | | | | | | | Introduce socfpga_sdram_get_config() function implement in a board file, which returns the socfpga_sdram_config structure. This is the last step in cleaning up the socfpga_mmr_init_full(), but not the last step which allows removing the inclusion of sdram.h from drivers/ddr/altera/sdram.c thus far. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up sdram_mmr_init_full() part 8Marek Vasut2015-08-081-1/+1
| | | | | | Fix the return value so that standard errno return values can be used. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Add temporary workaround for missing SD/MMC patchesMarek Vasut2015-08-081-0/+6
| | | | | | | | | | | | Add a small workaround into the platform code which forces the SDMMC into 8-bit mode (the default configuration for all socfpga platforms) to work around breakage caused by missing patches in mainline which switch the probing of SD/MMC to OF instead of static configuraiton. The patches will hit mainline after the SPL series, so to avoid build issues, add this small temporary workaround. Signed-off-by: Marek Vasut <marex@denx.de>
OpenPOWER on IntegriCloud