summaryrefslogtreecommitdiffstats
path: root/arch/arm/include
Commit message (Collapse)AuthorAgeFilesLines
...
* | mx5: add iomux-mx51.h includeMatt Sealey2012-09-011-0/+164
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow usage of the imx-common/iomux-v3.h framework by including pad settings for the i.MX51. The content of the file is taken from Linux kernel at commit 5d23b39 plus the required changes to make it work in U-Boot. The contained pad settings are the minimum required to make an Efika MX boot and get all the currently-implemented peripherals working in U-Boot. It is recommended that this file not be just a dumping ground for pins but only contain the settings required for all the boards using it. Changes for v2: * reference commit id from Linux kernel * additionally roll in the USB pads * removed GPIO_NUMBER define Signed-off-by: Matt Sealey <matt@genesi-usa.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'Otavio Salvador2012-09-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DRAM initialization, after SPL has complete, is exactly the same for all mxs SoCs so we should name it accordinly. The following boards has been changed: * apx4devkit * m28evk * mx28evk * sc_sps_1 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
* | mxs: Replace i.MX233 by i.MX23 on copyright headerOtavio Salvador2012-09-011-1/+1
| | | | | | | | | | | | | | All other header are going to use i.MX23 so we change this for consistency. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* | mx35: Remove declaration of non-existing functionBenoît Thébaudeau2012-09-011-2/+0
| | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx35: Move clock enums to clock.hBenoît Thébaudeau2012-09-012-27/+27
| | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx35: Remove declaration of non-existing functionBenoît Thébaudeau2012-09-011-1/+0
| | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx35: Fix broken pin definitionsBenoît Thébaudeau2012-09-011-3/+0
| | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx5: Undeclare imx_decode_pll()Benoît Thébaudeau2012-09-011-2/+0
| | | | | | | | | | | | | | The imx_decode_pll() function does not exist for mx5, so remove its declaration. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de>
* | MX: Set a common gpio.h for all i.MXStefano Babic2012-09-017-47/+44
| | | | | | | | | | | | | | | | | | Each i.MX has its own gpio.h, defining the same structure. The internal GPIO controller has the same layout (at least for the register used by u-boot) and can be shared. Signed-off-by: Stefano Babic <sbabic@denx.de> Tested-by: Matt Sealey <matt@genesi-usa.com>
* | mxs: Use correct function name to initialize dramFabio Estevam2012-09-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d92591a (mxs: Convert sys_proto.h prefixes to 'mxs') introduced a mxs_dram_init() function, which is not used anywhere. Fix it, so that the following warning goes away: mx28evk.c: In function ‘dram_init’: mx28evk.c:67:2: warning: implicit declaration of function ‘mx28_dram_init’ [-Wimplicit-function-declaration] Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
* | imx-common/cmd_bmode.c: add imx bmode (bootmode) commandTroy Kisky2012-09-013-0/+75
| | | | | | | | | | | | | | | | | | | | | | | | This is useful for forcing the ROM's usb downloader to activate upon a watchdog reset. Or, you can boot from either SD Card. Currently, support added for MX53 and MX6Q Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Note: MX53 support untested. Acked-by: Stefano Babic <sbabic@denx.de>
* | iomux: move IOMUX_GPR13_xxx definesTroy Kisky2012-09-012-111/+129
| | | | | | | | | | | | | | Move mx6 specific defines to arch-mx6 directory. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx35: Remove duplicate GPIO3_BASE_ADDRBenoît Thébaudeau2012-09-011-1/+0
| | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx3: Fix typo on IPU_CONF_CSI_ENBenoît Thébaudeau2012-09-012-2/+2
| | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx35: Fix typo on EDIOBenoît Thébaudeau2012-09-011-2/+2
| | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | rtc: add support of mx27 rtctrem2012-09-012-0/+43
| | | | | | | | | | | | | | This driver has been tested on board armadeus apf27. Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Acked-by: Stefano Babic <sbabic@denx.de>
* | mxs: Convert sys_proto.h prefixes to 'mxs'Otavio Salvador2012-09-011-10/+10
| | | | | | | | | | | | | | The sys_proto.h functions (except the boot modes) are compatible with i.MX233 and i.MX28 so we use 'mxs' prefix for its methods. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* | mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.hOtavio Salvador2012-09-012-1/+1
| | | | | | | | | | | | | | The CLKCTRL registers are SoC specific so we ought to have it clear on filename. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* | video: support exynos pwm backlight driverDonghwa Lee2012-09-011-0/+34
| | | | | | | | | | | | | | | | | | This patch support exynos pwm backlight driver. It can control backlight power and brightness by using pwm. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | video: exynos fb driver supports display port featureDonghwa Lee2012-09-011-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | If dp_enabled was set, exynos fb driver support display port feature. This patch depends on [PATCH] video: support exynos fimd driver for various exynos series. http://marc.info/?l=u-boot&m=134119605104467&w=2 Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | video: support exynos display port driversDonghwa Lee2012-09-012-0/+965
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch set supports exynos display port drivers. DisplayPort is an industry standard device to accommodate the increasing board adoption of digital display technology within the PC and consumer electronics. The interface supports internal chip-to-chip and external box-to-box digital display connections. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | EXYNOS5: add display port base addressDonghwa Lee2012-09-011-0/+3
| | | | | | | | | | | | | | | | | | This patch add display port base address for EXYNOS5. In case of EXYNOS4, use DEVICE_NOT_AVAILABLE macro because DP is not supported. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | EXYNOS5: support display port phy control functionDonghwa Lee2012-09-011-0/+5
| | | | | | | | | | | | | | | | This patch support display port phy control function. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | video: support exynos fimd driver for various exynos seriesDonghwa Lee2012-09-011-1/+24
| | | | | | | | | | | | | | | | | | This patch supports exynos fimd driver for various exynos series different from existing it supports only exynos4 chip. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0Rajeshwari Shinde2012-09-011-2/+5
| | | | | | | | | | | | | | | | | | | | This patch modifies the pinmux settings of MMC and UART as per Exynos5250 Rev 1.0. It also corrects the gpio offset calculations. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | EXYNOS5: CLOCK: Add BPLL supportRajeshwari Shinde2012-09-012-0/+3
| | | | | | | | | | | | | | | | This patch adds support for BPLL clock. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0Rajeshwari Shinde2012-09-011-0/+3
| | | | | | | | | | | | | | | | | | | | | | MPLL clock-out of Exynos5250 Rev 1.0 is always at 1.6GHz. Adjust the divisor value to get 800MHz as needed by devices like UART etc Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0Rajeshwari Shinde2012-09-011-0/+65
| | | | | | | | | | | | | | | | The patch adds the memory initialization sequence of DDR3. Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0Rajeshwari Shinde2012-09-011-108/+126
| | | | | | | | | | | | | | | | | | Define additional registers for clock control in Exynos5250 Rev 1.0 Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | ARCH: SPL: Add parametric board initializerRajeshwari Shinde2012-09-011-0/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | Add a structure for table-driven configuration mechanism such that no recompilation is needed to update the configuration parameters, rather than hard-coding board initialization parameters. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | ARM: add tegra20 support to arm720tAllen Martin2012-09-011-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support for tegra20 arm7 boot processor. This processor is used to power on the Cortex A9 and transfer control to it. In tegra this processor is an ARM7TDMI not an ARM720T, but since we don't use cache it was easier to just reuse the ARM720T code as the processors are otherwise identical except for cache and MMU. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra20: rename tegra2 -> tegra20Allen Martin2012-09-0126-26/+26
| | | | | | | | | | | | | | | | | | | | This is make naming consistent with the kernel and devicetree and in preparation of pulling out the common tegra20 code. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | ARM: add basic support for the Broadcom BCM2835 SoCStephen Warren2012-09-013-0/+139
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This SoC is used in the Raspberry Pi, for example. For more details, see: http://www.broadcom.com/products/BCM2835 http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf. Initial support is enough to boot to a serial console, execute a minimal set of U-Boot commands, download data over a serial port, and boot a Linux kernel. No storage or network drivers are implemented. GPIO driver originally by Vikram Narayanan <vikram186@gmail.com> with many fixes from myself. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
* | u8500: Enabling power to MMC device on AB8500 V2Mathieu J. Poirier2012-09-011-2/+20
| | | | | | | | | | | | | | | | | | Register mapping has changed on power control chip between the first and second revision. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Tom Rini <trini@ti.com>
* | u8500: Moving processor-specific functions to cpu area.Mathieu J. Poirier2012-09-011-0/+1
| | | | | | | | | | | | | | | | | | | | Functions such as providing power to the MMC device and reading the processor version register should be in the cpu area for access by multiple u8500-based boards. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Tom Rini <trini@ti.com>
* | snowball: applying power to LAN and GBF controllersMathieu J. Poirier2012-09-012-3/+15
| | | | | | | | | | | | | | | | LAN and GBF need to be powered explicitely, doing so with interface to AB8500 companion chip. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org>
* | snowball: Moving to ux500.v2 addess scheme for PRCMU accessMathieu J. Poirier2012-09-012-4/+8
| | | | | | | | | | | | | | | | Addresses between ux500.v1 and ux500.v2 have changed slightly, hence mandating a review of the PRCMU access methods. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org>
* | snowball: Adding CPU clock initialisationMathieu J. Poirier2012-09-011-4/+1
| | | | | | | | | | Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org>
* | snowball: Adding architecture dependent initialisationMathieu J. Poirier2012-09-011-5/+19
| | | | | | | | | | | | | | Enabling timers and clocks in PRCMU and cleaning up mailbox. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org>
* | u8500: Moving prcmu to cpu directoryMathieu J. Poirier2012-09-011-0/+55
| | | | | | | | | | | | | | | | This is to allow the prcmu functions to be used by multiple u8500-based processors. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org>
* | snowball: Add support for ux500 based snowball boardMathieu J. Poirier2012-09-012-0/+212
| | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org> Acked-by: Tom Rini <trini@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Conflicts: drivers/gpio/Makefile
* | am33xx evm: Update secure_emif_sdram_config during ddr initSatyanarayana, Sandhya2012-09-012-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates secure_emif_sdram_config with the same value written to sdram_config during ddr3 initialization. During suspend/resume, this value is copied into sdram_config. With this, a write to sdram_config at the end of resume sequence which triggers an init sequence can be avoided. Without this register write in place, the DDR_RESET line goes low for a few cycles during resume which is a violation of the JEDEC spec. Signed-off-by: Satyanarayana, Sandhya <sandhya.satyanarayana@ti.com>
* | da8xx/hawkboard: Add support for ohci host controllerSughosh Ganu2012-09-012-0/+106
| | | | | | | | | | | | | | | | | | | | Also enable the ohci port on hawkboard. These additions result in an increased u-boot size -- adjust the same accordingly in the board's config. Move the usb header for da8xx platforms under arch-davinci. Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
* | omap4/5/am33xx: Make lowlevel_init available to all armv7 platformsTom Rini2012-09-014-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Make the lowlevel_init function that these platforms have which just sets up the stack and calls a C function available to all armv7 platforms. As part of this we change some of the macros that are used to be more clear. Previously (except for am335x evm) we had been setting CONFIG_SYS_INIT_SP_ADDR to a series of new defines that are equivalent to simply referencing NON_SECURE_SRAM_END. On am335x evm we should have been doing this initially and do now. Cc: Sricharan R <r.sricharan@ti.com> Tested-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Rini <trini@ti.com>
* | am33xx: Correct MMC1, remove MMC2 supportTom Rini2012-09-012-3/+2
| | | | | | | | | | | | | | | | - Correct the MMC1 base offset - Remove MMC2 (that area is reserved and not MMC2). - Add the real BOOT_DEVICE_MMC2 value Signed-off-by: Tom Rini <trini@ti.com>
* | mxs: Reowork SPL to use 'mxs' prefix for methodsOtavio Salvador2012-09-011-2/+2
| | | | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* | mxs: prefix register structs with 'mxs' prefixOtavio Salvador2012-09-0116-16/+16
| | | | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* | mxs: prefix register acessor macros with 'mxs' prefixOtavio Salvador2012-09-0117-509/+509
| | | | | | | | | | | | | | As the register accessing mode is the same for all i.MXS SoCs we ought to use 'mxs' prefix intead of 'mx28'. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* | mxs: reorganize source directory for easy sharing of code in i.MXS SoCsOtavio Salvador2012-09-0125-0/+0
| | | | | | | | | | | | | | | | | | Most code can be shared between i.MX23 and i.MX28 as both are from i.MXS family; this source directory structure makes easy to share code among them. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
* | MX28: extend print_cpuinfo() to use chip informationOtavio Salvador2012-09-011-0/+4
| | | | | | | | | | | | | | The information now is gathered from HW_DIGCTL_CHIPID register and includes the chip modem and revision on the output. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
OpenPOWER on IntegriCloud