summaryrefslogtreecommitdiffstats
path: root/arch/arm/cpu/arm926ejs/mxs
Commit message (Collapse)AuthorAgeFilesLines
* mxs: Add MX23 quirks into the clock codeOtavio Salvador2013-01-211-9/+26
| | | | | | | | | | The MX23 has different handling of the SSP clock and GPMI NAND clock sources, add necessary quirks into the clock code to properly handle these. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* mxs: Fix the memory init for MX23Otavio Salvador2013-01-211-15/+78
| | | | | | | | | | The memory init is slightly different on MX23, thus split the memory init for mx23 and mx28 into different functions. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* mxs: Add function to ungate the power block on MX23Marek Vasut2013-01-211-0/+12
| | | | | | | | | | The power block on MX23 must first be ungated before it can be operated. Add function to MXS power init that ungates it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* mx23: config: Enable building of u-boot.sb binaryOtavio Salvador2013-01-211-0/+18
| | | | | | | | | For i.MX23 we need to pass imx23 as elftosb param. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mx23: SPL: Initialize DDR at 133MHzOtavio Salvador2013-01-211-0/+20
| | | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mx23: SPL: Add boot mode supportOtavio Salvador2013-01-211-0/+25
| | | | | | | | | This adds the boot mode support for i.MX23 processors. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mx23: Add support on print_cpuinfo()Otavio Salvador2013-01-211-1/+18
| | | | | | | | | Add information to identify i.MX23 chips and its known revisions. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mxs: clock: Use 'mxs' prefix for methodsOtavio Salvador2013-01-211-23/+23
| | | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mxs: ssp: Pull out the SSP bus to regs conversionMarek Vasut2013-01-211-1/+1
| | | | | | | | | | | | | Create function which converts SSP bus number to SSP register pointer. This functionality is reimplemented multiple times in the code, thus make one common implementation. Moreover, make it a switch(), since the SSP ports are not mapped in such nice linear fashion on MX23, therefore having it a switch will simplify things there. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andy Fleming <afleming@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
*-. Merge samsung, imx, tegra into u-boot-arm/masterAlbert ARIBAUD2012-12-224-220/+129
|\ \ | | | | | | | | | | | | | | | This commit merges branches from samsung, imx and tegra meant to fix merge issues between u-boot/master and u-boot-arm/master, as well as a few manual merge fixes.
| | * mxs: i2c: Implement algorithm to set up arbitrary i2c speedMarek Vasut2012-12-111-0/+2
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | This algorithm computes the values of TIMING{0,1,2} registers for the MX28 I2C block. This algorithm was derived by using a scope, but the result seems correct. The resulting values programmed into the registers do not correlate with the contents in datasheet. When using the values from the datasheet, the I2C clock were completely wrong. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Wolfgang Denk <wd@denx.de>
| * mxs: SPL: Generalize memory initializationOtavio Salvador2012-12-071-6/+13
| | | | | | | | | | | | | | | | Use a generic 'dram_vals[]' array that has the full initialization sequence and rename the initialization method so it doesn't has a frequency on its name. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * mxs: Staticize SPL functionsMarek Vasut2012-12-043-34/+34
| | | | | | | | | | | | | | | | | | The MXS SPL didn't mark local functions "static". Fix it. This also makes the SPL smaller by roughly 300 bytes. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
| * mxs: Properly setup VDDD in power supply setup codeMarek Vasut2012-12-042-14/+1
| | | | | | | | | | | | | | | | | | The memory setup code adjusted the VDDD voltage. Remove this adjustment and configure the VDDD voltage correctly in the power supply setup code. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
| * mxs: Implement common function to setup VDDxMarek Vasut2012-12-041-170/+83
|/ | | | | | | | | | | | | | Implement common function to setup the VDDIO, VDDD and VDDA voltage. Right now, there are two almost identical functions to setup VDDIO and VDDD, which is prone to breakage. Pull out the differences into constant structure and pass them as an argument to the common function. Moreover, the function has almost identical loops for setting higher and lower VDDx voltage. Merge these two loops. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* common: Discard the __u_boot_cmd sectionMarek Vasut2012-10-221-3/+0
| | | | | | | | | | | The command declaration now uses the new LG-array method to generate list of commands. Thus the __u_boot_cmd section is now superseded and redundant and therefore can be removed. Also, remove externed symbols associated with this section from include/command.h . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
* common: Add .u_boot_list into all linker filesMarek Vasut2012-10-221-0/+4
| | | | | | | | | | Add section for the linker-generated lists into all possible linker files, so that everyone can easily use these lists. This is mostly a mechanical adjustment. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
* serial: mxs: spl: Remove empty serial_* functions from SPL codeMarek Vasut2012-10-151-4/+0
| | | | | | | | | | | | Remove the empty bodies from serial_* functions from MXS SPL code. These empty implementations are now in common/serial.c instead so declaring them also in the SPL code would cause a colision once serial multi is enabled unconditionally. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Stefano Babic <sbabic@denx.de>
* MX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDSMarek Vasut2012-09-041-3/+5
| | | | | | | | | | Use proper struct-based access for this register in the SPL code. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* mxs: Convert timeout parameter to 'unsigned int'fabio.estevam@freescale.com2012-09-011-2/+4
| | | | | | | | | For representing a timeout value, it makes more sense to pass it as 'unsigned int'. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'Otavio Salvador2012-09-011-2/+2
| | | | | | | | | | | | | | | | The DRAM initialization, after SPL has complete, is exactly the same for all mxs SoCs so we should name it accordinly. The following boards has been changed: * apx4devkit * m28evk * mx28evk * sc_sps_1 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
* mxs: Only build internal Ethernet controller for i.MX28Otavio Salvador2012-09-011-1/+1
| | | | | | | | | The internal Ethernet controller is only available on i.MX28 processors so it needs to use CONFIG_MX28 guardian to avoid having this code called in others. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Marek Vasut <marex@denx.de>
* MX28: config: Allow different target generation in elftosb callOtavio Salvador2012-09-011-0/+0
| | | | | | | | The elftosb call needs to use a target param specific for i.MX28. This patch allow for later addition of i.MX233. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Marek Vasut <marex@denx.de>
* MX28: Shuffle around the power management codeMarek Vasut2012-09-011-6/+3
| | | | | | | | | | Move some function calls to a more appropriate place, so they're called only when needed. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* MX28: Drop the cp15 reconfiguration from SPLMarek Vasut2012-09-011-42/+0
| | | | | | | | | | | | | | | The SPL doesn't need the CP15 reconfiguration, as that's what the BootROM does for us already. Moreover, when the CP15 is reconfigured and the code returns control to BootROM, the USB boot works no more. Remove the code and allow [1] to work properly as well. [1] http://git.bfuser.eu/?p=marex/mxsldr.git;a=summary Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* mxs: Convert sys_proto.h prefixes to 'mxs'Otavio Salvador2012-09-013-20/+20
| | | | | | | The sys_proto.h functions (except the boot modes) are compatible with i.MX233 and i.MX28 so we use 'mxs' prefix for its methods. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mxs: Remove not required include of iomux-mx28.hOtavio Salvador2012-09-011-1/+0
| | | | | | | The iomux-mx28.h include is not required on spl_mem_init.c so it has been droped. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mxs: Remove not required explicit iomux-mx28.h includeOtavio Salvador2012-09-011-1/+0
| | | | | | | | The iomux header is included on sys_proto.h so to avoid SoC specific header inclusion. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Marek Vasut <marex@denx.de>
* i.MX28: bug fixes in PMU configuration codeStathis Voukelatos2012-09-011-6/+6
| | | | | | Signed-off-by: Stathis Voukelatos <stathis.voukelatos@linn.co.uk> Cc: Stefano Babic <sbabic@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com>
* MX28: Move the u-boot.bd info CPUDIR/SOCDIRMarek Vasut2012-09-011-0/+14
| | | | | | | | This gets us rid of duplication of the same file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* mxs: rename mx28.c to mxs.c as it is common to i.MX233 and i.MX28 SoCsOtavio Salvador2012-09-012-1/+1
| | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mxs: Clarify why we poweroff in case of brownout in 5v conflictOtavio Salvador2012-09-011-0/+4
| | | | | | | | If VDDIO has a brownout, then the VDD5V_GT_VDDIO becomes unreliable but this wasn't clear on code so a comment has been added to clarify it. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mxs: Reowork SPL to use 'mxs' prefix for methodsOtavio Salvador2012-09-016-110/+110
| | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mxs: prefix register structs with 'mxs' prefixOtavio Salvador2012-09-016-108/+108
| | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mxs: prefix register acessor macros with 'mxs' prefixOtavio Salvador2012-09-013-8/+8
| | | | | | | As the register accessing mode is the same for all i.MXS SoCs we ought to use 'mxs' prefix intead of 'mx28'. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mxs: reorganize source directory for easy sharing of code in i.MXS SoCsOtavio Salvador2012-09-0112-0/+2853
Most code can be shared between i.MX23 and i.MX28 as both are from i.MXS family; this source directory structure makes easy to share code among them. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
OpenPOWER on IntegriCloud