summaryrefslogtreecommitdiffstats
path: root/arch/arm/cpu/arm1136/mx35
Commit message (Collapse)AuthorAgeFilesLines
* mx35: Fix boot hang by avoiding vector relocationFabio Estevam2015-03-022-0/+27
| | | | | | | | | | | | | | | Since commit 3ff46cc42b9d73d0 ("arm: relocate the exception vectors") mx35 does not boot anymore. Add a specific relocate_vectors macro that skips the vector relocation, as the i.MX35 SoC does not provide RAM at the high vectors address (0xFFFF0000), and (0x00000000) maps to ROM. This allows mx35 to boot again. Cc: Sebastian Priebe <sebastian.priebe@cadcon.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Stefano Babic <sbabic@denx.de>
* Rename some defines containing FAT in their name to be filesystem genericGuillaume GARDET2014-10-271-1/+1
| | | | | | | | | | | Rename some defines containing FAT in their name to be filesystem generic: MMCSD_MODE_FAT => MMCSD_MODE_FS CONFIG_SPL_FAT_LOAD_ARGS_NAME => CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME => CONFIG_SPL_FS_LOAD_PAYLOAD_NAME CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION => CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
* arm: mx35: use common timer functionsAndrew Ruder2014-09-161-83/+0
| | | | | | | | | | | | | | | | | This patch moves mx35 to the common timer functions added in commit 8dfafdd - Introduce common timer functions <Rob Herring> The (removed) mx35 timer code (specifically __udelay()) could deadlock at the 32-bit boundary of get_ticks(). get_ticks() returned a 32-bit value cast up to a 64-bit value. If get_ticks() + tmo in __udelay() crossed the 32-bit boundary, the while condition became unconditionally true and locks the processor. Rather than patch the specific mx35 issues, simply move everything over to the common code. Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* kbuild: move asm-offsets.c from SoC directory to arch/$(ARCH)/libMasahiro Yamada2014-03-281-71/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot has supported two kinds of asm-offsets.h. One is generic for all architectures and its source is located at ./lib/asm-offsets.c. The other is SoC specific and its source is under SoC directory. The problem here is that only boards with SoC directory can use the asm-offsets infrastructure. Putting asm-offsets.c right under CPU directory does not work. Now a new demand is coming. PowerPC folks want to use asm-offsets. But no PowerPC boards have SoC directory. It seems inconsistent that some boards add asm-offsets.c to SoC directoreis and some to CPU directories. It looks more reasonable to put asm-offsets.c under arch/$(ARCH)/lib. This commit merges asm-offsets.c under SoC directories into arch/$(ARCH)/lib/asm-offsets.c. By the way, I doubt the necessity of some entries in asm-offsets.c. I am leaving refactoring to the board maintainers. Please check "TODO" in the comment blocks in arch/{arm,nds32}/lib/asm-offsets.c. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Yuantian Tang <Yuantian.Tang@freescale.com>
* ARM: convert makefiles to Kbuild styleMasahiro Yamada2013-10-311-25/+3
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-245-72/+5
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* imx: mx35: Remove legacy iomux supportBenoît Thébaudeau2013-05-052-115/+0
| | | | | | | Legacy iomux support is no longer needed now that all boards have been converted to iomux-v3. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* mx35 iomux: correct offsets of IOMUX registersPhilip Paeps2013-04-161-2/+2
| | | | | | | | | | This makes mxc_iomux_set_input() work correctly. Previously, the incorrect offset of IOMUXSW_INPUT_CTL caused mxc_iomux_set_input() to write to the wrong register, possibly resulting in unexpected behaviour. Signed-off-by: Philip Paeps <philip@paeps.cx> Acked-by: Stefano Babic <sbabic@denx.de>
* SPL: ONENAND: Fix some ONENAND related defines.Enric Balletbo i Serra2013-03-081-1/+1
| | | | | | | | Some ONENAND related defines use the term ONE_NAND instead of ONENAND, as the technology name is ONENAND this patch replaces all these defines. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
* ppc: arm: Move sdhc_clk into arch_global_dataSimon Glass2013-02-041-3/+3
| | | | | | | This is used by both powerpc and arm, but I think it still qualifies as architecture-specific. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Move lastinc to arch_global_dataSimon Glass2013-02-011-1/+1
| | | | | | Move this field into arch_global_data and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Move tbl to arch_global_dataSimon Glass2013-02-011-1/+1
| | | | | | Move this field into arch_global_data and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* mx31/mx35/mx51/mx53/mx6: add watchdogTroy Kisky2013-01-131-6/+0
| | | | | | | Use a common watchdog driver for all these cpus. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
* MX35: add support for woodburn boardStefano Babic2012-10-262-0/+138
| | | | | | | | | | | | | | | | | | | | | The woodburn board is based on the MX35 SOC. Support for both external (NOR) and internal (SD Card) boot mode are added. It uses the generic SPL framework to implement the internal boot mode. The following peripherals are supported: - Ethernet (FEC) - SD Card - NAND (512 MB) - NOR Flash In the internal boot mode, a simple imximage header is generated to set the address in internal RAM where the SOC must copy the SPL code. The initial setup is then demanded to the SPL itself. Signed-off-by: Stefano Babic <sbabic@denx.de>
* MX35: Add soc_boot_mode and soc_boot_device to MX35Stefano Babic2012-10-261-0/+75
| | | | | | | The functions are required to use the generic SPL Framework. Signed-off-by: Stefano Babic <sbabic@denx.de>
* mx35: Fix eSDHC clocksBenoît Thébaudeau2012-10-161-2/+12
| | | | | | | | | | | | | | Each eSDHC instance has a dedicated clock. gd->sdhc_clk must also be set accordingly. This is good for the case only a single SDHC instance is used (initialization made with fsl_esdhc_mmc_init()). A future patch will fix the multi-instance use case (initialization made directly with fsl_esdhc_initialize()). Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Eric Bénard <eric@eukrea.com> Cc: Otavio Salvador <otavio@ossystems.com.br>
* mx35: Define MAX and AIPS registersBenoît Thébaudeau2012-10-151-1/+32
| | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: Use MXC_I2C_CLK in imx i2c driverMatthias Weisser2012-10-151-0/+1
| | | | | | | | i2c didn't work on imx25 due to missing MXC_IPG_PERCLK. Now using MXC_I2C_CLK on all imx systems using i2c. Signed-off-by: Matthias Weisser <weisserm@arcor.de> Acked-by: Stefano Babic <sbabic@denx.de>
* mx35 timer: Switch to 32-kHz sourceBenoît Thébaudeau2012-09-061-17/+27
| | | | | | | | | | Switch the mx35 timer driver to the 32-kHz clock source to avoid calling mxc_get_clock() again and again, and to be consistent with the timer drivers of other i.MX SoCs. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* mx35: Define default SoC input clock frequenciesBenoît Thébaudeau2012-09-062-28/+17
| | | | | | | | | Define default SoC input clock frequencies for i.MX35 in order to get rid of duplicated definitions. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* mx35: Fix clock dividersBenoît Thébaudeau2012-09-061-30/+18
| | | | | | | | | The clock dividers that were used do not match at all the reference manual. They were either completely broken, or came from an early silicon revision incompatible with the current one. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de>
* mx35: Fix decode_pllBenoît Thébaudeau2012-09-061-3/+6
| | | | | | | | The MFN bit-field of the PLL registers represents a signed value. See the reference manual. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de>
* mx35: Move clock enums to clock.hBenoît Thébaudeau2012-09-011-2/+2
| | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* mx35 iomux: Remove unused macroBenoît Thébaudeau2012-09-011-2/+0
| | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* mx35: Add cpu_mmc_init()Benoît Thébaudeau2012-09-011-1/+14
| | | | | | | | Add cpu_mmc_init() function to make it easy to init a single eSDHC instance. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* mx35: generic: Let get_reset_cause be defined only when ↵Fabio Estevam2012-02-271-1/+1
| | | | | | | | | CONFIG_DISPLAY_CPUINFO is selected get_reset_cause() function is only used inside print_cpuinfo(), so let it be defined only when CONFIG_DISPLAY_CPUINFO is selected. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* MX35: add missing get_ticks() and get_tbclk()Stefano Babic2012-02-271-39/+64
| | | | | | | | commit f31a911fe (arm, post: add missing post_time_ms for arm) enables get_ticks and get_tbclk for all arm based boards, MX5/MX6 have not yet implemented. Signed-off-by: Stefano Babic <sbabic@denx.de>
* net: imx: Add multi-FEC support for imx_get_mac_from_fuseFabio Estevam2012-01-161-1/+1
| | | | | | | | | | Add multi-FEC support for imx_get_mac_from_fuse by passing dev_id as a parameter. This feature is important on mx28 SoC for example that has two FEC ports. Cc: Ben Warren <biggerbadderben@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* MX35: add reset cause as provided by other i.MXStefano Babic2011-11-031-2/+29
| | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
* imx: fix coding styleFabio Estevam2011-10-271-1/+1
| | | | | | | | | Fix checkpatch warning and errors in several i.MX related files. While at it also address a checkpatch warning at arch/arm/cpu/armv7/mx5/soc.c regarding the usage of extern in a C file. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* Makefile : fix generation of cpu related asm-offsets.hStefano Babic2011-09-071-2/+0
| | | | | | | | | | | commit 0edf8b5b2fa0d210ebc4d6da0fd1aceeb7e44e47 breaks building on a different directory with the O= parameter. The patch wil fix this issue, generating always asm-offsets.h before the other targets. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Matthias Weisser <weisserm@arcor.de> CC: Wolfgang Denk <wd@denx.de>
* MX: MX35 / MX5: uniform clock command with powerpcStefano Babic2011-09-041-2/+2
| | | | | | | | | | | There was already a command to show the processor clocks for PowerPC (clocks). For i.MX, the "clockinfo" command was introduce. The patch sets the same command name used on PowerPC. A nasty and not needed newline is also dropped in the help for the command. Signed-off-by: Stefano Babic <sbabic@denx.de>
* Timer: Remove reset_timer() for non-Nios2 archesGraeme Russ2011-07-261-5/+0
|
* Timer: Remove set_timer completelyGraeme Russ2011-07-261-4/+0
|
* build: Add targets for auto gen of asm-offsets.h and use it in imx35Matthias Weisser2011-07-141-11/+0
| | | | | | | | asm-offsets.h should be auto generated. This patch adds two rules to rules.mk which makes this possible and removes the rules on imx35. Signed-off-by: Matthias Weisser <weisserm@arcor.de> Acked-by: Stefano Babic <sbabic@denx.de>
* Add support for MX35 processorStefano Babic2011-02-025-0/+805
The patch adds basic support for the Freescale's i.MX35 (arm1136 based) processor. The patch adds also a prototype for the initialization of the FEC(ethernet controller) to netdev.h to avoid warnings. Signed-off-by: Stefano Babic <sbabic@denx.de>
OpenPOWER on IntegriCloud