summaryrefslogtreecommitdiffstats
path: root/CHANGELOG
Commit message (Collapse)AuthorAgeFilesLines
* * Prepare for releasewdenk2003-10-291-0/+7
| | | | | | | | | * Fix problems in memory test on some boards (which was not non-destructive as intended) * Patch by Gary Jennejohn, 28 Oct 2003: Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack to prevent stack overflow on ARM systems
* * Patch by Stephan Linz, 28 Oct 2003:wdenk2003-10-281-0/+7
| | | | | | | | fix init sequence error for NIOS port * Allow lowercase spelling for IceCube_5200; support MPC5200LITE name * Add CONFIG_VERSION_VARIABLE to TRAB configuration
* * Patch by Xiao Xianghua, 23 Oct 2003:wdenk2003-10-261-0/+7
| | | | | | | | small patch for mpc85xx * Fix small problem in MPC5200 I2C driver * Fix FCC3 support on ATC board
* * Correct header printing for multi-image files in do_bootm()dzu2003-10-241-0/+4
| | | | * Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
* Fix PCI problems on PPChameleon boardwdenk2003-10-221-0/+2
|
* * Patch by Steven Scholz, 18 Oct 2003:wdenk2003-10-191-0/+20
| | | | | | | | | | | | | | | | | | | | | Fix AT91RM9200 ethernet driver * Patch by Nye Liu, 17 Oct 2003: Fix typo in include/mpc8xx.h * Patch by Richard Woodruff, 16 Oct 03: Fixes for cpu/arm925/interrupt.c - Initialize timestamp & lastdec vars. - fix timestamp overflows. - fix lastdec overflow. - smarter normalization to allow udelay() below 1ms to work. * Patch by Scott McNutt, 16 Oct add networking support for the Altera Nios Development Kit, Cyclone Edition (DK-1C20) * Patch by Jon Diekema, 14 Oct 2003: add hint about doc/README.silent to README file
* * Fix PCI problems on PPChameleonEVBwdenk2003-10-191-0/+3
| | | | * TRAB auto-update: image type patch by Martin Krause, 17 Oct 2003
* Add CompactFlash support for NSCUdzu2003-10-191-0/+2
|
* TRAB auto-update: Base decision if we have to strip the imagewdenk2003-10-161-0/+3
| | | | header on image type as encoded in the header
* * Patches by Xianghua Xiao, 15 Oct 2003:wdenk2003-10-151-2/+10
| | | | | | | | - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
* * Make sure HUSH is initialized for running auto-update scriptswdenk2003-10-141-0/+14
| | | | | | | | | | | * Make 5200 reset command _really_ reset the board, without running any other code after it * Fix flash mapping and display on P3G4 board * Patch by Kyle Harris, 15 Jul 2003: - add support for Intel IXP425 CPU - add support for IXDP425 eval board
* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silentwdenk2003-10-101-0/+3
| | | | for more information
* * Patch by Steven Scholz, 10 Oct 2003wdenk2003-10-091-0/+7
| | | | | | | | | | - Add support for Altera FPGA ACEX1K * Patches by Thomas Lange, 09 Oct 2003: - Endian swap ATA identity for all big endian CPUs, not just PPC - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize args to linux - add support for dbau1x00 board (MIPS32)
* * Patches by Thomas Lange, 09 Oct 2003:wdenk2003-10-091-9/+9
| | | | | | | | | | - fix cmd_ide.c for non ppc boards (read/write functions did not add ATA base address) - fix for shannon board - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code * Patch by Sangmoon Kim, 07 Oct 2003: add support for debris board
* * Patch by Martin Krause, 09 Oct 2003:wdenk2003-10-091-0/+12
| | | | | | | | | | | | | Fixes for TRAB board - /board/trab/rs485.c: correct baudrate - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in udelay(); fix some timing problems with adc controller - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power; modify commands: touch and buzzer * Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE (quick & dirty workaround for rogue pointer problem in get_vfatname()); Use direct function calls for auto_update instead of hush commands
* * Patch by Scott McNutt, 04 Oct 2003:wdenk2003-10-081-1/+17
| | | | | | | | | | | | | | | | | | - add support for Altera Nios-32 CPU - add support for Nios Cyclone Development Kit (DK-1C20) * Patch by Steven Scholz, 29 Sep 2003: - A second parameter for bootm overwrites the load address for "Standalone Application" images. - bootm sets environment variable "filesize" to the resulting (uncompressed) data length for "Standalone Application" images when autostart is set to "no". Now you can do something like if bootm $fpgadata $some_free_ram ; then fpga load 0 $some_free_ram $filesize fi * Patch by Denis Peter, 25 Sept 2003: add support for the MIP405 Rev. C board
* * Patch by Yuli Barcohen, 25 Sep 2003:wdenk2003-10-081-0/+7
| | | | | | | | add support for Zephyr Engineering ZPC.1900 board * Patch by Anders Larsen, 23 Sep 2003: add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only implemented for the x86 architecture)
* * Patch by Sangmoon Kim, 23 Sep 2003:wdenk2003-10-081-0/+19
| | | | | | | | | | | | | | | | | | | | fix pll_pci_to_mem_multiplier table for MPC8245 * Patch by Anders Larsen, 22 Sep 2003: enable timed autoboot on PXA * Patch by David Müller, 22 Sep 2003: - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver returns correct libgcc file path - "latency" reduction of busy-loop waiting to improve "U-Boot" boot time on s3c24x0 systems * Patch by Jon Diekema, 19 Sep 2003: - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet link state to the fault LED. - In NetLoop, make the Fault LED reflect the link status. The link status gets updated on entry, and on timeouts.
* * Patch by Anders Larsen, 18 Sep 2003:wdenk2003-10-081-0/+10
| | | | | | | | | | | allow mkimage to build and run on Cygwin-hosted systems * Patch by Frank Müller, 18 Sep 2003: use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in cpu/mpc8xx/fec.c * Patch by Pantelis Antoniou, 16 Sep 2003: add tool to compute fileds in the PLPRCR register for MPC86x
* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.wdenk2003-10-071-0/+2
|
* Fix build problems under FreeBSDwdenk2003-10-071-0/+2
|
* Add generic filesystem image typewdenk2003-10-061-0/+2
|
* * Update TRAB auto update codewdenk2003-10-061-0/+8
| | | | | | | | | | | * Make fatload set filesize environment variable fix potential buffer overlow problem * enable basic / medium / high-end configurations for PPChameleonEVB board; fix NAND code * enable TFTP client code to specify to the server the desired timeout value (see RFC-2349)
* Improve SDRAM setup for TRAB boarddzu2003-09-301-0/+2
|
* Suppress all output with splashscreen configured only if "splashimage"dzu2003-09-301-0/+3
| | | | is set
* * Fix problems with I2C support for mpc5200dzu2003-09-301-0/+2
|
* * Adapt TRAB configuration and auto_update to new memory layoutdzu2003-09-291-0/+2
|
* Add configuration for wtk boarddzu2003-09-251-0/+2
|
* Add support for the Sharp LQ065T9DR51U LCD displaydzu2003-09-251-0/+13
|
* * Patch by Rune Torgersen, 17 Sep 2003:wdenk2003-09-181-0/+1
| | | | | - Fixes for MPC8266 default config - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
* * Patches by Jon Diekema, 17 Sep 2003:wdenk2003-09-181-0/+9
| | | | | | | - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and env_common.c) - sbc8260 tweaks - adjust "help" output
* * Patches by Anders Larsen, 17 Sep 2003:wdenk2003-09-181-0/+9
| | | | | | | | | | - fix spelling errors - set GD_FLG_DEVINIT flag only after device function pointers are valid - Allow CFG_ALT_MEMTEST on systems where address zero isn't writeable - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs - trigger watchdog while waiting in serial driver
* Support new configuration of TRAB board with more memorywdenk2003-09-171-1/+2
| | | | Minor cleanup of comments
* Add auto-update code for TRAB board using USB memory stickswdenk2003-09-171-0/+2
|
* * Disable MPC5200 bus pipelining as workaround for bus contentionwdenk2003-09-161-0/+2
|
* * Modify XLB arbiter priorities on MPC5200 so all devices use samewdenk2003-09-161-0/+4
| | | | | priority; configure critical interrupts to be handled like external interrupts
* Make IPB clock on MGT5100/MPC5200 configurable in board config file;wdenk2003-09-161-0/+3
| | | | go back to 66 MHz for stability
* * Patches by Jon Diekema, 15 Sep 2003:wdenk2003-09-151-0/+4
| | | | | | | | | | | | | | | | | | | | | | | - add description for missing CFG_CMD_* entries in the README file - sacsng tweaks: include/configs/sacsng.h: + Support extra bootp options like: 2nd DNS and send hostname + Enabling ping and irq command + Adding defines for a bunch of misc configrabled options (patches for these options will be coming) + Adding watchdog support, but it isn't enabled yet. board/sacsng/sacsng.c: + Suppressing unneeded output when the quiet environment is non-zero. + show_boot_progress() now accepts any negative number as a failure code. + show_boot_progress() flashes the error code 5 times, and then resets the board to retry the boot from the top * Patch by Gleb Natapov, 14 Sep 2003: enable watchdog support for all MPC824x boards that have a watchdog
* * Patch by Gleb Natapov, 14 Sep 2003:wdenk2003-09-141-0/+9
| | | | | | | | | | enable watchdog support for all MPC824x boards that have a watchdog * On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the "Non-octet Aligned Frame" errors we see at 100 Mbps * Patch by Sharad Gupta, 14 Sep 2003: fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
* * Patch by llandre, 11 Sep 2003:wdenk2003-09-131-0/+3
| | | | update configuration for PPChameleonEVB board
* * Patch by David Müller, 13 Sep 2003:wdenk2003-09-131-0/+5
| | | | | | various changes to VCMA9 board specific files * Add I2C support for MGT5100 / MPC5200
* * Patch by Rune Torgersen, 11 Sep 2003:wdenk2003-09-121-0/+8
| | | | | | | | | Changed default memory option on MPC8266ADS to NOT be Page Based Interleave, since this doesn't work very well with the standard 16MB DIMM * Patch by George G. Davis, 12 Sep 2003: fix Makefile settings for sk98 driver
* Patch by Stefan Roese, 12 Sep 2003stroese2003-09-121-0/+7
|
* * Patch by Martin Krause, 11 Sep 2003:wdenk2003-09-111-0/+5
| | | | | | add burn-in tests for TRAB board * Enable instruction cache on MPC5200 board
* * Patch by Gary Jennejohn, 11 Sep 2003:wdenk2003-09-111-0/+11
| | | | | | | | | | | - allow for longer timeouts for USB mass storage devices * Patch by Denis Peter, 11 Sep 2003: - fix USB data pointer assignment for bulk only transfer. - prevent to display erased directories in FAT filesystem. * Change output format for NAND flash - make it look like for other memory, too
* * Patches by Denis Peter, 9 Sep 2003:wdenk2003-09-101-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | add FAT support for IDE, SCSI and USB * Patches by Gleb Natapov, 2 Sep 2003: - cleanup of POST code for unsupported architectures - MPC824x locks way0 of data cache for use as initial RAM; this patch unlocks it after relocation to RAM and invalidates the locked entries. * Patch by Gleb Natapov, 30 Aug 2003: new I2C driver for mpc107 bridge. Now works from flash. * Patch by Dave Ellis, 11 Aug 2003: - JFFS2: fix typo in common/cmd_jffs2.c - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option - JFFS2: remove node version 0 warning - JFFS2: accept JFFS2 PADDING nodes - SXNI855T: add AM29LV800 support - SXNI855T: move environment from EEPROM to flash - SXNI855T: boot from JFFS2 in NOR or NAND flash * Patch by Bill Hargen, 11 Aug 2003: fixes for I2C on MPC8240 - fix i2c_write routine - fix iprobe command - eliminates use of global variables, plus dead code, cleanup.
* * Add support for USB Mass Storage Devices (BBB)wdenk2003-09-101-2/+11
| | | | | | (tested with USB memory sticks only) * Avoid flicker on TRAB's VFD
* * Add support for SK98xx driverwdenk2003-09-051-0/+15
| | | | | | | | | | | | | | | * Add PCI support for SL8245 board * Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB) or 1 x AM29LV652 (two LV065 in one chip = 16 MB); Run IPB at 133 Mhz; adjust the MII clock frequency accordingly * Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz) to allow for more accurate baudrate settings (error now 0.7% at 115 kbps, instead of 3.5% before) * Patch by Andreas Mohr, 4 Sep 2003: Fix a lot of spelling errors
* * Add support for PPChameleon Eval Boardwdenk2003-09-021-0/+7
| | | | | | | * Add support for P3G4 board * Fix problem with MGT5100 FEC driver: add "early" MAC address initialization
* Patch by Yuli Barcohen, 7 Aug 2003:wdenk2003-08-311-0/+3
| | | | | | | | | According to the MPC8260 User's Manual, PCI_MODE signal should be reflected in SCCR register, and local bus pins configuration is taken from HRCW and appears in SIUMCR. For some reason it does not work this way, so the only possibility to detect if the board is configured in PCI mode is to check the BCSR. This patch sets SCCR and SIUMCR according to the BCSR.
OpenPOWER on IntegriCloud