diff options
Diffstat (limited to 'post/cpu/ppc4xx/ether.c')
| -rw-r--r-- | post/cpu/ppc4xx/ether.c | 50 |
1 files changed, 25 insertions, 25 deletions
diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c index e40e19be23..c3665da94a 100644 --- a/post/cpu/ppc4xx/ether.c +++ b/post/cpu/ppc4xx/ether.c @@ -109,9 +109,9 @@ static void ether_post_init (int devnum, int hw_addr) #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* provide clocks for EMAC internal loopback */ - mfsdr (sdr_mfr, mfr); + mfsdr (SDR0_MFR, mfr); mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum); - mtsdr (sdr_mfr, mfr); + mtsdr (SDR0_MFR, mfr); sync (); #endif /* reset emac */ @@ -150,13 +150,13 @@ static void ether_post_init (int devnum, int hw_addr) #if defined(CONFIG_440GX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) - mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | + mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT | 0x00330000); #else - mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT); + mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT); /* Errata 1.12: MAL_1 -- Disable MAL bursting */ if (get_pvr() == PVR_440GP_RB) { - mtdcr (malmcr, mfdcr(malmcr) & ~MAL_CR_PLBB); + mtdcr (MAL0_CFG, mfdcr(MAL0_CFG) & ~MAL_CR_PLBB); } #endif /* setup buffer descriptors */ @@ -174,39 +174,39 @@ static void ether_post_init (int devnum, int hw_addr) case 1: /* setup MAL tx & rx channel pointers */ #if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR) - mtdcr (maltxctp2r, &tx); + mtdcr (MAL0_TXCTP2R, &tx); #else - mtdcr (maltxctp1r, &tx); + mtdcr (MAL0_TXCTP1R, &tx); #endif #if defined(CONFIG_440) - mtdcr (maltxbattr, 0x0); - mtdcr (malrxbattr, 0x0); + mtdcr (MAL0_TXBADDR, 0x0); + mtdcr (MAL0_RXBADDR, 0x0); #endif - mtdcr (malrxctp1r, &rx); + mtdcr (MAL0_RXCTP1R, &rx); /* set RX buffer size */ - mtdcr (malrcbs1, PKTSIZE_ALIGN / 16); + mtdcr (MAL0_RCBS1, PKTSIZE_ALIGN / 16); break; case 0: default: /* setup MAL tx & rx channel pointers */ #if defined(CONFIG_440) - mtdcr (maltxbattr, 0x0); - mtdcr (malrxbattr, 0x0); + mtdcr (MAL0_TXBADDR, 0x0); + mtdcr (MAL0_RXBADDR, 0x0); #endif - mtdcr (maltxctp0r, &tx); - mtdcr (malrxctp0r, &rx); + mtdcr (MAL0_TXCTP0R, &tx); + mtdcr (MAL0_RXCTP0R, &rx); /* set RX buffer size */ - mtdcr (malrcbs0, PKTSIZE_ALIGN / 16); + mtdcr (MAL0_RCBS0, PKTSIZE_ALIGN / 16); break; } /* Enable MAL transmit and receive channels */ #if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) - mtdcr (maltxcasr, (MAL_TXRX_CASR >> (devnum*2))); + mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> (devnum*2))); #else - mtdcr (maltxcasr, (MAL_TXRX_CASR >> devnum)); + mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> devnum)); #endif - mtdcr (malrxcasr, (MAL_TXRX_CASR >> devnum)); + mtdcr (MAL0_RXCASR, (MAL_TXRX_CASR >> devnum)); /* set internal loopback mode */ #ifdef CONFIG_SYS_POST_ETHER_EXT_LOOPBACK @@ -257,14 +257,14 @@ static void ether_post_halt (int devnum, int hw_addr) /* 1st reset MAL channel */ /* Note: writing a 0 to a channel has no effect */ #if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) - mtdcr (maltxcarr, MAL_TXRX_CASR >> (devnum * 2)); + mtdcr (MAL0_TXCARR, MAL_TXRX_CASR >> (devnum * 2)); #else - mtdcr (maltxcarr, MAL_TXRX_CASR >> devnum); + mtdcr (MAL0_TXCARR, MAL_TXRX_CASR >> devnum); #endif - mtdcr (malrxcarr, MAL_TXRX_CASR >> devnum); + mtdcr (MAL0_RXCARR, MAL_TXRX_CASR >> devnum); /* wait for reset */ - while (mfdcr (malrxcasr) & (MAL_TXRX_CASR >> devnum)) { + while (mfdcr (MAL0_RXCASR) & (MAL_TXRX_CASR >> devnum)) { if (i++ >= 1000) break; udelay (1000); @@ -274,9 +274,9 @@ static void ether_post_halt (int devnum, int hw_addr) #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* remove clocks for EMAC internal loopback */ - mfsdr (sdr_mfr, mfr); + mfsdr (SDR0_MFR, mfr); mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum); - mtsdr (sdr_mfr, mfr); + mtsdr (SDR0_MFR, mfr); #endif } |
